User final deskptop issue of certification

Similar Questions

• Quest Desktop Virtualization (vWorkspace) user profile management issues

  Hi, I work on the configuration of the user profile with (Win 7 VDI) virtual desktop management service following the guide of vworkspace administrator 7.6 and any other docs, I found on quest.com and I have a problem with it, there is nothing in the file metaprofiles\global. It doesn't seem to work. I have a file (vdi-storage1) server with action c:\vdiuserprofiles\ created folder where the profile will be stored. I also installed the role of vWorkspace on this file server user profile management and the service is running. 5206 port is open. All the virtual desktops have pntools installed with all the options and I can see that the user profile agent is running. I can reach the storage server (vdi-storage1) using telnet on port 5206 and ping. I even gave domain user full ntfs permissions to the c:\vdiuserprofiles folder, but I don't think that this is necessary.

  -In the Managment Console > resources > (right click 'properties') user profiles

  -General: Compression: low, log level: detailed, Refresh: 5 minutes

  -Storage servers: server name: vdi-storage1, Basic file: c:\vdiuserprofiles\metaprofiles, Folder Global: Global, The TCP Port: 5206

  -Silos: name: VirtualDesktopSilo, storage for the user profile server: vdi-storage1

  -Properties VirtualDesktopSilo

  -Members: name: desktop Windows 7, Type: computer group

  - Storage for the user profile server: vdi-storage1

  - Automatic backup: 30 minutes

  The MC did create the folder metaprofiles\global automatically when I applied the settings. I use supplied with vworkspace default registry keys, and I attributed them to the domain users group. I recorded several times power on and off on the virtual desktop. I noticed 5 second delay on the virtual machine after that I typed the information identification, and before she really connects me since I activated the profile management. A I forgot something or is misconfigured it?

  OK, after having received assistance from Dell (Quest) suppor, t the issue happens to be with me remoting (via RDP) for VM directly instead of by the intermediary of the broker vWorkspace, therefore the profile could not be created because I had not the closed valid session so it never created the profile. Once I've tested it using vWorkspace connector this worked.

• Internal error during the installation of DirectX for the user final web runtime install

  Hi all

  I was browsing the forums and reading the discussions that relate to my question.  Unfortunately, each of the solutions that I found do not seem to solve my specific problem.
  I recently got a new laptop (Dell E6540) and thought I'd try world of combat aircraft.  My old laptop did not have a graphics card that has been up to the task, but I think this one does.
  I am running Windows 7, which integrates the latest version of DirectX (11).  I downloaded and installed the game, and when I click on 'Play', I get the message informing me that I'm missing the d3dx9_43.dll.  I then visit the Microsoft Download Center and try to download the installer of web runtime DirectX end-user.  Following the installation of the components in the stage of finalisation of the web installer, I get the following message:
  "An internal system error has occurred.  Please refer to DXError.log and DirectX.log in your Windows folder to determine the problem. »
  I then click OK in the error message, the web installer shows failed to install, so I click "Finish."  At this point, the popsup Program Compatibility Assistant, saying: the program may not be installed properly and gives me the opportunity to 'Reinstall using recommended settings', what I'm doing.  Then run the web installer a second time, giving me the same error internal system presented above.
  I wonder if someone might have suggestions as to how I can resolve this issue (or to find the above mentioned .log files).
  Thanks for your help.

  While Win7 installed DX 9, 10 and 11 it does not install with all files.
  d3dx9_43.dll is the latest DX 9 files.
  The best method when you have not already updated DX is to use the DX Web Installer,.
  then you can try using them.
  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  If you have the same problem with the DX Web Installer trying to boot into Safe Mode with networking
  and try to run the installation program from there Web DX.

  -L' Web Installer does not overwrite the DX files, it only installs the DX 'missing' files, so when it
  is a DX of corrupted files and you do not receive an error with the name that you will need to use the full
  DirectX Redist (2010), which I assume is what you are trying to use, as this will overwrite all the
  DX files.
  -Similarly, you can use Safe Mode (networking not required that you have all files) may
  be used when there is a problem installing DX with the complete installation program.

  -When there is a corrupted file of DX and you get the name of this file, an error, as with
  your d3dx9_43.dll, you can delete this file in System32 (sysWOW64 when using 64-bit
  Windows) and when you run the Web Installer will replace the now "missing" with a new file
  copy.

  Absence of the foregoing, it may be your problem is more to do not have the necessary permissions to
  install the DX.
  This could be due to UAC settings too high, does not not as administrator or another
  restrictive framework, maybe even your anti-virus (disable temporarily when trying to install DX).
  Try - R / click the DXSETUP.exe. Then go to Properties-compatibility and check the box
  next to the race... as an administrator.
  .

  .

• User final local connection to Windows prompt?

  I have a Win 2008 R2 guest in vsphere, and we have a user who needs to run a special statistical package (HLM). It does not work via a remote desktop connection. It runs only when you are logged in "locally" through the vsphere client. Is there something I can put in place to allow the final user this? If it's just a matter of the vsphere client configuration on his desk, I need to configure it so that it only sees this guest of windows with all of the other virtual machines.

  My apologies, I'm sure that it is documented, but we are in a time crunch, so I at least hope to get pointed in the right direction. Thank you.

  Tim

  Yes it's that simple that to load client vSphere on office here - thanks to the use of the permissions, you will be able to limit access to only that single VM.

• Issue of certification JDeveloper 11.1.1.6.0

  Hello
  
  Certification information published for JDeveloper; [http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html], Oracle JDK 1.7 (32 and 64-bit) is supported as of 11.1.1.6.0.
  However, the default JDK comes with 11.1.1.6.0 is always jdk160_24 (JDK 1.6 update 24).
  
  Is there a reason for this?
  If there is a reason that 11.1.1.6.0 is still using JDK 6, why is he not yet an updated version (released with updated 24, 31 update is available...)?
  If I had to change my 11.1.1.6.0 installation use the JDK 7 are there aspects important I need to consider?
  
  Thank you
  Matthew.
  
  Published by: Matthew Carrigy on 28/02/2012 12:14

  Matthew,

  so, what's the real problem? The version of the JDK installed with JDeveloepr is obviously one that has tested prior to release. So unless there is an issue that can be directed to the JDK, you can assume the installer must be correct. Like your thread started with why don't JDeveloper 11.1.1.6 installs with JDK 7 by default, I assume you want to use the JDK 7 anyway. I think that we can shorten this discussion by agreeing that the product has been tested as having been shipped. If you want to stay with JDK 6 but to install with the version mentioned in the document, download the generic Setup JAR (which I usually do) and point the installer to your JDK version. Then solves the problem for you. If you want to fill a bug report on the certification document, please go ahead.

  Frank

• Security mode of the user to the issue of the domain

  Hi all

  I want to change the security mode of the user in the field.

  Real users added manually are not a domain user.

  And I want to allow access to different users in the field to get in all actions.

  When I change domain mode: I should create local users in the field or what do I put as the local users in the NAS and allow access for users in domain for actions at the same time?

  Thank you for the help

  Hello Val,.

  Welcome to the community!

  If you switch in domain mode, make sure that your users/groups have been created on your domain server. To set the permission on the actions, see this article.

  Please note that all your created manually ReadyNAS local users will be unavailable for use.

  Kind regards

  BrianL
  NETGEAR community team

• Issue of certification

  Anyone know the cost for a certification exam? If the cost is based on the regional level, I'm in Georgia, USA.

  My CLAD exam was $ 129 last October in Los Angeles.  For this one, you must create an account with VIEW Pierson to save and see the price, schedule, and location.

  Higher level exams are scheduled up to OR, and you should be able to see prices online.

  Ed

• User account connection issues: shows a "Welcome" and then "logout".

  As a result of the previous question, I did a clean boot operations, but the problem of opening other user accounts still exists. I tried to create another user account, but when I connect it shows a "Welcome" and then "disconnect" - this happens to all other accounts except for me, as an administrator.

  I tried to access other accounts with 'user account control' turned back and was to square one and had to access my account in safe mode to disable the "a/c user control. I could not access any other a/c in safe mode - it is disconnected.

  So basically I can connect only through administrator account.

  Any other ideas would be appreciated.

  With our thanks

  Hello

  I reloaded Windows Vista disk and everything works ok now, including user accounts.

  Thank you

• Windows 7 Pro, download "Microsoft Office for the user final license agreement." in office 2003 programs.

  I bought a new HP with Windows 7 Pro computer, then loaded all of the software I used on my old XP system. Whenever I have start any Office 2003 application, I get a dialog box titled "Microsoft Office end-user license agreement. I have to click "I agree" before you continue. I use an old Vista solution of "as admin" and now I get a box asking if it is to change this program (register I think).  How can I stop this box to appear? Thank you.

  Hello sys169,

  Thanks for posting on the Microsoft answers Forum.

  As you encounter a problem with an office related question, it would be better to post in the forum Office.
  Please click here to post in the Forum Office of the community.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WebEx meets the users server management issues

  Hi all

  I have three questions about the management of the user accounts on CWMS.

  (1) cisco document mentions that a creation of password email will be sent to an new added manually to the users, but the document does not mention if a new user imported via cvs file will be sent an email from creation of password or not?

  (2) If a new user has been added to CWMS via LDAP synchronization, CMWS email will inform the user about the creation of the account automatically?

  (3) If a user account has been imported to CWMS via cvs, if on file after LDAP synchronization, the user account will be overrided or the user account will be duplicated?

  Thank you

  Danny

  Hey Danny,

  Let me answer your questions:

  (1) Yes. Accounts imported via CSV when you use local user (without integration of directory or SSO) accounts marked as active during the import will get a "required Action: create a password for your new account" e-mail system.

  (2) only if you enable LDAP authentication you can configure notifications about creating an account that will be sent. You can configure to be automatic by checking the 'send notifications automatically", or you can manually click the"Learn more now"to inform all users imported from the creation of the account.

  (3) if the e-mail address of the account is the same locally on CUCM, the account will not be substituted. If an e-mail address is different, a new account will be created while the account is disabled.

  I hope this helps.

  -Dejan

• new user accounts configuration issues / secondary

  I use a gateway 6 computer preinstalled with windws 7. I went through the process to set up secondary 'User accounts' howevr when I go to the page to logon to access that I can't access these accounts. The masseage to bed "the user profile Service has no login" 'impossible to load the user profile' and kicking then go back to the logon screen. Can someone give me a clue as to what I can do or what needs to be done to correct the situation?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• First issues of Certification VMware times

  Hello community VMware.

  I plan on getting my DVC VCP5 and unfortunately with a wall of questions that I could not find a satisfactory responses.

  I received an email with a 50% discount code for the 5.1 on the course of the application. How long this code will be valid? (There is some lag with budgeting approval)

  https://myLearn.VMware.com/mgrReg/plan.cfm?plan=47690 & UI = www_edu

  (Linked to the previous link offshore) 5.1 course includes a review with the price good?

  https://myLearn.VMware.com/mgrReg/quote.cfm?course=188576 & UI = www_edu & linkui = www_edu

  What is this code/course valid and the reduction of 20% advantage VMUG?

  http://www.VMUG.com/p/cm/ld/FID=10

  Is it possible to buy this course with a 50% discount code and plan my course online 90 days window several months in the future?

  Session for this course 5.1 sit for examination 5.5 allows?

  After becoming certified VCP5-DVC, I understand that they expire a lot like my Cisco certifications, but within a period of two years instead of three. During these two years I'll be able to sit new exams outside version 5.x (e.g. 6.x) and pay only the cost of the exam? Or I'll be required to pay for more training each major revision?

  Again, sorry for all the questions; I really enjoy taking the time to help me!

  ~ Mike

  Hello

  Here's a few more answers to your questions:

  (1) the offer of 50% on the classroom on request is valid until June 20. All the terms & conditions are listed here: on request in class T2 Promo

  (2) it includes a good purchase, Yes, but also a review guide and practice. The complete set is described here: https://mylearn.vmware.com/mgrReg/plan.cfm?plan=39210&ui=www_edu

  (3) No, you cannot combine discounts.

  (4) n ° your 90 day window starts when you buy class.

  Jill

• The user managed the issue of recovery

  Hi all

  While doing refresh it by using the backup hot, recreate us the controlfile and cancel the recovery of the base (base to recover using backup controlfile until cancel). How oracle suggests the next archiving log.

  I mean we have recreated the controlfile right?

  It can suggest change (SNA), which is the required form datafile headers. But how is it that it gives the necessary exact archivelog.

  The CCR, for the second case, it gives just the necessary change.

  Someone help me please understand this.

  Enter the user name: / as sysdba

  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options

  SQL > restore database using backup controlfile until cancel;
  ORA-00279: change 12913047615299 September at 08/12/2013 09:08:08 to
  thread 1
  ORA-00289: suggestion:
  /U23/backup/archive/abctest/redolog_1_5052_814521583.arc
  ORA-00280: change 12913047615299 thread 1 is in sequence #5052

  > But how is it that it gives the necessary exact archivelog.

  LOG_ARCHIVE_DEST parameters / LOG_ARCHIVE_FORMAT and LOG_ARCHIVE_DEST_n.  He used to 'build' the expected file name.

  In the CCR, he needs a starting point for the first file Archivelog must be provided by the ADMINISTRATOR.  Subsequent archivelog filenames are self-built.

  Hemant K Collette

• Class VCP and the issue of Certification

  I want to just make sure I read it correctly.

  You must take a VMware class if you want to get the VCP certification?

  If this is the case, seems to be more than a bit of a scam to me. Use VMware for four years in a company and the looks of easy test after that much experience.

  Having to pay a lot of money for a class on what I already know...

  If someone could clarify, I would appreciate it. Thank you.

  EI

  You are right. It is mandatory to follow the official VMware courses and pass the examination to be a PCV. Practical experience is strongly recommended to help you pass the exam and you can go to take the exam without taking the course, but even if you pass the exam, you will be officially certified until what the official course.

  I guess they do it to enhance the VCP. They are also trying very hard to prevent people from taking brain dump to pass the exam.

• Issue of Certification DBA 10g

  In August 2008, I have passed the Tests of Certification DBA 2 but in the context of the reception of the certificate of the OCP, I had to take a course more. Well, I never found a moment to be able to follow the course to receive the credentials of the OCP. I was wondering if I can still take one of approved courses and receive credentials of OCP always. If so, I will consider this fall.
  
  I have the credentials of the OCA, when I passed the first test. A few months later, I got the 2nd test. I just never found the time to take the class, so, I hope that I can still make and receive credentials.
  
  Any comment is appreciated.
  
  Chris

  user6384327 wrote:
  In August 2008, I have passed the Tests of Certification DBA 2 but in the context of the reception of the certificate of the OCP, I had to take a course more. Well, I never found a moment to be able to follow the course to receive the credentials of the OCP. I was wondering if I can still take one of approved courses and receive credentials of OCP always. If so, I will consider this fall.

  I have the credentials of the OCA, when I passed the first test. A few months later, I got the 2nd test. I just never found the time to take the class, so, I hope that I can still make and receive credentials.

  Any comment is appreciated.

  Chris

  You can choose a course off course list for 10 g OCP DBA... If these become rare a 11 g DBA equivalent may be accepted in the place... check it first if you think you have special case (but not vice versa for those seeking 11 g OCP DBA, a course of 10 g would not happen).

  You have until the expiry of the certification to submit a course and get it checked.

  Rgds - bigdelboy.