User login problem, immediately disconnects after 'welcome. '

After updating my subscription of AV program I am able to connect to 2 of the 3 users set up the Windows 7 operating system

System Restore may solve your problem.

Tags: Windows

Similar Questions

WebLogic user login problem

Experts!
I accidentally deleted all weblogic user groups and disconnected.
Now when I try to login, it says access denied.
How this can be solved? I don't have any other user created.
Please suggest

If you have manually deleted all groups default settings of the administration console and are not able to connect now.

Then just rename the data folder, restart the management server.

Default groups will return and you should be able to connect now.

Note: Only the default groups will be restored, if you have any external proiders (such as AD) set up this information will be lost.

User login problem

Laptop was purchased 1 year ago with windows xp already loaded in. When xp launched its application for the user id ID... user shows as a user. in the past, I just typed in user in the password section and it went through. Now, he does not accept that, I get message that password is incorrect. How to do this? This just happened yesterday out of the blue, and it's so frustrating because I can't! To my knowledge, I didn't change or do anything to cause this. Any help is appreciated

Start the computer in safe mode and log on to the built-in account named administrator . You will need to know the password, if any, for this account. Once, go to Panel > user accounts and change the password for your regular account. Boulder computer Maven
Most Microsoft Valuable Professional

after user, login and welcome screen, the screen is black no office

after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the only thing I get is safe mode with command prompt and the system recovery options. Inspiron 1526 less then years.

Hi Lilrockmike,

Thanks for posting your question on the Forums of Windows Vista.

Have you tried opening the the Task Manager on the screen by pressing CTRL + ALT + DEL?

If you are able to open the Task Manager, please follow the steps in the data:

1. click on the processes tab.

2. scroll to the bottom and check if explorer.exe is listed under the name of the image.

3. If explorer.exe is not in the list,

(a) click file and then click New task (run).

(b) type explorer.exe, and then click Ok.

(c) check whether you have the back office.

4. If explorer.exe is listed,

(a) click on explorer.exe, and then click end process.

(b) click file and then click New task (run).

(c) type explorer.exe, and then click Ok.

(d) check whether you have the back office.

If the problem is solved, I recommend an antivirus on the computer analysis.

I will recommend you to a virus on the computer scan using a good antivirus.

You can also use Microsoft Live Onecare anti-virus.

http://OneCare.live.com/site/en-us/default.htm

Hope the above information helps. Please post back and we do know.

Thank you & best regards

Ashish Gupta
Microsoft Answers Support Engineer

Homepage of vpn clientless ssl after login problem

Hi all

I have a problem with my vpn without customer portal.

I need to configure when a user connects via the portal, something that works very well, it ends up on the home page.

At the present time there ends up immediately on the anyconnect button.

With the home page, I say the first button that says 'home '.

Users should be able to click on "Web Applications", hereinafter 'House '.

Under 'Web Applications' users must have their button aswell "Anyconnect".

First of all, I wasn't able to make the portal "Anyconnect" button display in the menu.

Then after awhile, I realized that when dynamic access policy says "Unchanged" on the page "access method".

When you change this setting "Client Anyconnect" portal no yard is no longer, I find myself immediately at the start of the anyconnect client.

When you select 'Portal' get the page of the portal, but the menu anyconnect is missing.

When you select 'Time-by default-portal' I get the anyconnect button and all the other menus, which is good.

But I hold the home button to be the default.

And not the anyconnect, after login button immediately you get the anyconnect start page.

And then finally and most importantly, when you select 'Time-by default-Anyconnect' you login to the Web portal, anyconnect begins immediately in the menu.

Something we want the end user to manually (click on "Start Anyconnect") I mean!

I'm sure that DAP which forces because of the options above.

But what selection unchanged or anything that does not include Anyconnect, then the anyconnect button went...

I don't know what I can do to change that.

Am I missing something?

I would say that DAP is not necessary, but when I put everything in the DAP default by default, then the anyconnect button went into the menu...

Kind regards

Robin

Here is my configuration:

attributes of Group Policy GP_company_intranet_portal

value x.x.x.x WINS server

value x.x.x.x DNS server

Protocol-tunnel-VPN-client ssl clientless ssl

Split-tunnel-policy tunnelall

company.local value by default-field

value of IPP_SSLVPN01 address pools

WebVPN

the value of the URL - list BML_company_intranet_portal

Disable http proxy

AnyConnect Dungeon-Installer installed

AnyConnect ask to activate default webvpn

value of customization CO_company_intranet_portal

gzip http-comp

hidden actions no

activate ActiveX-relay

disable file entry

exploration of the disable files

disable the input URL

disable the auto-signon chip-tunnel

type tunnel-group TG_company_portal_localauth remote access

tunnel-group TG_company_portal_localauth webvpn-attributes

personalization CO_company_intranet_portal

allow group-url https://portal.company.be

xxxxxxxxxx of encrypted password 0 privilege testaccount user name

attributes of testaccount user name

VPN-group-policy GP_company_intranet_portal

Protocol-tunnel-VPN-client ssl clientless ssl

disable the password-storage

value of group-lock TG_company_portal_localauth

type of remote access service

Troubleshooting when you are connected to, just to check if the right group strategy is used:

FW-company # display webvpn vpn-sessiondb

Session type: WebVPN

User name: testaccount index: 510

Public IP address: x.x.x.x

Protocol: without customer

License: AnyConnect Premium

Encryption: 3DES hash: SHA1

TX Bytes: bytes 114897 Rx: 16087

Group Policy: GP_company_intranet_portal

Tunnel of Group: TG_company_portal_localauth

Connect time: 14:50:56 GMT + 2 Thursday, October 25, 2012

Time: 0 h: 00 m: 03 s

Inactivity: 0 h: 00 m: 00s

Result of the NAC: unknown

Map VLANS: VLAN n/a: no

Hi Robin,

You can try:

1. Please remove / disable the rules of RAP and keep only one by default with the default action and parameters (continue). This is to exclude the DAPs as the primary cause.

2 - GP_company_intranet_portal group policy attributes

WebVPN

AnyConnect ask no webvpn default

Let me know how it goes.

HTH.

Portu.

Please note all useful posts

page automatic session timeout disconnection after inactivity of the user

Hello gurus dreamweaver!
Please how do I automatically my Member site Web page connection timeout after a period specifies the inactivity of the user.
I discovered that is a member in my restricted page login and not forget to close your session, the page is will not disconnect automatically.
How can I make my Web page, or automatically disconnect after a period specifies the inactivity of the user.
See my below Member login page:
<? php require_once('Connections/democon.php');? >
<? PHP
initialize the session
If (! isset {})
session_start();
}
* Log out the current user. **
$logoutAction = $_SERVER ['PHP_SELF']. » ? doLogout = true;
If ((isset & & ($_SERVER ['QUERY_STRING']! = "")) {})
$logoutAction. = '& '. htmlentities($_SERVER['QUERY_STRING']);
}
{If ((isset($_GET['doLogout'])) & & ($ {_GET ['doLogout'] == "true"))}
to completely disconnect a visitor, you must delete the session varialbles
$_SESSION ['MM_Username'] = NULL;
$_SESSION ['MM_UserGroup'] = NULL;
$_SESSION ['PrevUrl'] = NULL;
unset($_SESSION['MM_Username']);
unset($_SESSION['MM_UserGroup']);
unset($_SESSION['PrevUrl']);
$logoutGoTo = 'login.php ';
If {($logoutGoTo)
Header ("Location: $logoutGoTo");
"exit";
}
}
? >
<? PHP
If (! isset {})
session_start();
}
$MM_authorizedUsers = "";
$MM_donotCheckaccess = "true";
Restrict access to Page: grant or deny access to this page
Function isAuthorized ($strUsers, $UserGroup, $strGroups, $UserName) {}
For safety, first assuming that the visitor is NOT allowed.
$isValid = false;
When a visitor is connected to this site, the MM_Username of Session variable value equal to their username.
So, we know that a user is NOT logged if this Session variable is empty.
If (! empty ($UserName)) {}
In addition to being connected, you can restrict access to only certain users based on a created ID when they connect.
Analyze the channels in the tables.
$arrUsers = explode (",", $strUsers);
$arrGroups = explode (",", $strGroups);
If (in_array ($UserName, $arrUsers)) {}
$isValid = true;
}
Or, you can restrict access to only certain users based on their user name.
If (in_array ($UserGroup, $arrGroups)) {}
$isValid = true;
}
If (($strUsers == "") & & true) {}
$isValid = true;
}
}
return $isValid;
}
$MM_restrictGoTo = 'login.php ';
If (!) {(((isset($_SESSION['MM_Username']))) & & (isAuthorized ("", $MM_authorizedUsers, $_SESSION ['MM_Username'], {$_SESSION ['MM_UserGroup']})))}
$MM_qsChar = ';?
$MM_referrer = $_SERVER ['PHP_SELF'];
If (strpos ($MM_restrictGoTo, "?")) $MM_qsChar = "&";
If (isset($_SERVER['QUERY_STRING']) & & strlen($_SERVER['QUERY_STRING']) > 0)
$MM_referrer. = « ? ». $_SERVER ['QUERY_STRING'];
$MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar. "accesscheck =". UrlEncode ($MM_referrer);
Header ("Location:".) $MM_restrictGoTo);
"exit";
}
? >
<? PHP
If (! function_exists ("GetSQLValueString")) {}
function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
{
If (via PHP_VERSION < 6) {}
$theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;
}
$theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);
Switch ($theType) {}
case 'text ':
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "long":
case "int":
$theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';
break;
case "double":
$theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';
break;
case "date":
$theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
break;
case "set":
$theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;
break;
}
Return $theValue;
}
}
$colname_Recordset1 = "-1";
If (isset($_SESSION['MM_Username'])) {}
$colname_Recordset1 = $_SESSION ['MM_Username"];
}
@mysql_select_db ($database_democon, $democon);
$query_Recordset1 = sprintf ("" SELECT * FROM Portal WHERE idno = %s ", GetSQLValueString ($colname_Recordset1,"text")");
$Recordset1 = mysql_query ($query_Recordset1, $democon) or die (mysql_error ());
$row_Recordset1 = mysql_fetch_assoc ($Recordset1);
$totalRows_Recordset1 = mysql_num_rows ($Recordset1);
? >
<! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< title > Untitled Document < /title >
< / head >
< body >
< style p = "do-size: 18px" > < / p >
< style p = "font size: 18px" > welcome < span style = "color: #F00" > <? PHP echo $row_Recordset1 ['firstname'];? > < / span > < span style = "color: #F00" > <? PHP echo $row_Recordset1 ['name'];? >! </span > you now connect in the Member area. < /p >
< p > < / p >
< table width = "356" height = "127" border = "0" align = "center" cellpadding = "6" >
< b >
< th colspan = "2" bgcolor = "#FFFFCC" scope = "row" > YOUR PROFILE < /th >
< /tr >
< b >
< th width = "134" align = "left" bgcolor = '#FFFFCC' scope = "row" > NO ID < /th >
< td width = "342" bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ["idno"];? > < table >
< /tr >
< b >
< th align = "left" bgcolor = '#FFFFCC' scope = "row" > NAME < /th >
< td bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ['name'];? > < table >
< /tr >
< b >
< th align = "left" bgcolor = '#FFFFCC' scope = "row" > NAME < /th >
< td bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ["FirstName"];? > < table >
< /tr >
< b >
< th align = "left" bgcolor = '#FFFFCC' scope = "row" > EMAIL < /th >
< td bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ['email'];? > < table >
< /tr >
< /table >
< p > < / p >
< p > < / p >
< p > < / p >
< p > < / p >
< p > < a href = "<?" PHP echo $logoutAction? > "> sign OUT < /a > < /p >"
< p > < / p >
< p > < / p >
< p > < / p >
< / body >
< / html >
<? PHP
mysql_free_result ($Recordset1);
? >

.osgood_ ~.

If the time-out period is applied to the side server, download links and others 'actions' all absolutely need to (and should) be run through validation. If there is a video completely downloaded on the screen there is only technology really client-side (JavaScript) which can detect if any action ' customer' is valid and within the time-out. I can think of scenarios 1 million and 1 million responses for each of them but finally if the user performs an action, or directly by refreshing PHP via AJAX, he should be hitting a side script server, and this time-out will decide last spring if the action is allowed or not. There all be wired through it.

That said, although I said it is not 100% reliable and can be falsified, I would absolutely use a JavaScript (preference) or a refresh meta technique to bounce off the side of the customer as well as the logic in the back-end. The back-end is the absolute goal keeper and as you say, it would be little course if this isn't the case. The client side only decorate but is very important for a good user experience.

piece gear ~

Just $0.02, but you shouldn't go off with the stand-alone example code that I gave. In this scenario, I was 'definition' which, in your case, is of $_SESSION ['MM_Username"]. It had not been previously assigned. If Dreamweaver is the filling with a string and try try to reassign to one object (as I am) you will get errors. My code has been created as a completely isolated example, do not follow quite literally here as a paste - in the solution. I just need to know your level of comfort with PHP.

I have not scanned all of this code for the PHP quality nor do I confess that I am familiar with the automation than Dreamweaver, but I'm very familiar with PHP, so it's the portion of code only from your original post with my timestamp amendment added to this. As mentioned, duplicate the file if you have your old code intact (still, or better, use git or SVN and version it). Then try to remove the part of the code of this page in replace with this:
```
 0)
  $MM_referrer .= "?" . $_SERVER['QUERY_STRING'];
  $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
  header("Location: ". $MM_restrictGoTo);
  exit;
}

if (!function_exists("GetSQLValueString")) {
  function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
  {
  if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
  }

  $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);

  switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
  }
  return $theValue;
  }
}

//-----------------------------------------------------------------------------

// define your idle max, in seconds
define('IDLE_MAX', 5);

// if we already have $_SESSION['MM_Username'], let's check a timestamp
if (isset($_SESSION['MM_Username']))
{
  // if we get here, we're logged in.. check or add a timestamp
  if (isset($_SESSION['timestamp']))
  {
    // we have a timestamp, let's see if it exceeds our idle threshold
    if ((time() - $_SESSION['timestamp']) > IDLE_MAX)
    {
      // we have EXCEEDED our idle, we are therefore going to log out.
      // Using the assigned variable from above:
      header($logoutAction);
      exit;
    }//if idle exceed
    else
    {
      // idle is not exceeded, allow the user to continue but UPDATE timestamp
      $_SESSION['timestamp'] = time();
    }

  }// if timestamp
  else
  {
     // we have a username but no timestamp, must be initial login
     $_SESSION['timestamp'] = time();
  }

}//if MM_Username

//-------------------------------------------------------------------------

$colname_Recordset1 = "-1";
if (isset($_SESSION['MM_Username'])) {
  $colname_Recordset1 = $_SESSION['MM_Username'];
}
mysql_select_db($database_democon, $democon);
$query_Recordset1 = sprintf("SELECT * FROM portal WHERE idno = %s", GetSQLValueString($colname_Recordset1, "text"));
$Recordset1 = mysql_query($query_Recordset1, $democon) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
?>
```
Again, I've changed any of the logic of outside Dreamweaver removing closing/reopining tags PHP (not sure if the snippits need those, add as needed). I also removed the condition to start the session because it is completely unnecessary. It's literally everything, except the code see you near the end, surrounded by long comment lines-...

Page has 2 points of basic input that I see, but no matter how many there. The logic is simple enough. If at the time wherever you arrive at my code, you have Dreamweaver validate a user, $_SESSION ['MM_Username'] will be defined. If that's true then I check a timestamp. Is there then the user was literally just connected, so I add a timestamp. Whenever the page is refreshed from there, re - run all the code, the timestamp is checked to make sure that it is below your IDLE_MAX (in seconds). I put it to 5 again to be clear. If the time is greater than 5 seconds since the logon, I use the above global defined $logoutAction and redirect you to the sign-out process which should land in login.php on the next redirection, as long as a user logged on.

I always try to use the code that already exists and do nothing useless, but I must assume from this code that no information is sent to the browser for display in this code. A redirect to the header() function will not work if this is not the case. I don't "see" anything here which is explicitly doing just that so I guess it will work fine. Please give him a simple test and season to taste.

No matter what the user is trying to do, if the idle time is exceeded the sign-out process is up on them at all times. No matter if they refresh, back, etc.

Direct mail disconnects after sending an e-mail and then connect without a restar the computer what is the problem

Direct mail disconnects after sending an e-mail and then will reconnect until the computer is restared why?

Hello

· Is it limited only to live mail?

· It's a Windows Live Mail client?

You did changes to the computer before the show?

Check the status of the question in the clean boot:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

You can also post your question in the forum of Live Mail for assistance:

Windows Live Mail Forum

http://www.windowslivehelp.com/forums.aspx?ProductID=15

How to set up my phone to return to the login screen of the user up in the morning after you close the lid?

When I close the lid of my laptop, I have it set to sleep and put into hibernation, but whenever I'm took over in the last logged-on user account. I use Windows 7 and I would like to know how to configure settings to direct me to the user login screen when I open it again the lid of my laptop after the '.

I read elsewhere that the power settings changing standby and Hibernate should do the trick, but so far they have failed.
Any suggestions?

Thank you

Most laptops will give you the option to do nothing, sleep, Hibernate or stopping when you close the lid. End the session is not normally available. However, you can select the option that requires the user to enter a password when the machine is awake.

Bluetooth disconnects after mating - Windows 8.1

After the success of coupling it immediately disconnects again

I use an HP ENVY 15 Notebook PC with Windows 8.1

BT installed driver is Intel Wireless Bluetooth 4.0

Would the Bluetooth Driver software (Ralink) MediaTek

Download HP sp65804.exe solve the problem?

any help most welcome

N ° he wouldn't.

If the installed hardware is Intel, then install a driver for a bluetooth adapter is a futile exercise.

Try installing an updated driver for the device you are trying to connect to. This is usually where the weak point is.

Preparation of desktop + default user login

Occasionally, when I start my laptop Windows 7 Ultimate, instead of the 'Welcome' screen and a login prompt for the user by default ('B'), I get "Readiness Office", then the login for the user by default ('B') prompt. After a successful login, I get a new office and default user privileges 'B '. No files or other inerference profile to the default user 'B' will appear. To fix this, I restart or shutdown. Then start up, usually, I welcome and one for the default user login screen. After login, I have all the stuff for the user 'B '. It happens randomly without error message to the previous closure or the new connection. Any ideas?

Hi BobThurmond,

Method 1: First of all, you should try to check and safe mode if the problem persists.

Follow this link provided below to start your computer in safe mode.

Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Method 2: If the problem does not happen, I recommend you perform the clean boot.

Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Method 3:

If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

Create a user profile.
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

Now search for the question.

Follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

In addition, You can also use Event Viewer to search for information on the problem.

Here is an article on how to do it:

The display of the error messages in the event viewer
http://support.Microsoft.com/kb/947321

You can see for more information on the issue at the time where it occurred.

You can post this information here to help us narrow down where the focus.

Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Satellite L510 - WLAN disconnects after having ejected the disk USB

Hey.

I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.

What's happening:
After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.

I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.

HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.

I would really appreciate if someone could provide any kind of fix for this.

My laptop:
-Satellite L510
-Windows 7 64-bit OS
-pentium (R) dual-core CPU T4500 2.30 GHz
-2 GB of ram

Hi captainmarvel,

Just a simple question: have you tried to update the driver WLAN?
New driver WLAN, you can find on the official website of Toshiba in order to check this!

Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?

Cannot logon - if I try to login, it keeps disconnecting themselves.

After my computer starts to the logon screen, but I can't log on to the office. If I try to login, it keeps disconnecting. I tried to start in safe mode, but it was still disconnecting when I try to disconnect it. Please help it is urgent

The "loop of logon / logoff" is usually caused by malicious software.
See if any of these items will help you:

«How to fix the log / close the loop in Windows XP»
<>http://www.ehow.com/how_4527843_onlog-off-loop-Windows-XP.html >

The following article uses the resolution of this problem as an example for editing the registry using Bart PE:

"How to edit the registry offline using BartPE boot CD"
<>http://WindowsXP.MVPs.org/peboot.htm >

HTH,
JW

Whenever I try to log on to the administrator account, it will start to connect, but immediately disconnected return.

Original title: why my account automatically disconnect?

I am running Windows Vista Home Premium.

Whenever I try to log on to the administrator account, it will start to connect but then before he's even changed screens, immediately disconnect back.

I can connect to it using safe and I ran Anti-malware, Microsoft Security Essentials and Advanced System Care and they have all come without any problem.

Now, I guess I'm using an account with administrative privileges but different. I just need to open Windows Media Center, but every time I try, it says: I'm on the guest account. My machine won't let me create a new account, delete other accounts, or even to change the passwords. In addition, a random ASP.NET account appears and I can't remove it.

I don't understand what I could do wrong. Any help is greatly appreciated.

Hi Jorgomli,

1. you receive messages or error codes when you try to connect?

2. you remember to make changes to the computer before this problem?

Step 1:

Because you can connect to the account administrator in safe mode, you can try to create a new safe mode administrator account and check.

Check out the link:

Create a user account

http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

Step 2:

If still face problems, then you can try setting the default Administrator account and check if you can solve the problem.

a. click the Start button

(b) in the Start Menu, click all programs followed accessories

c. in the menu accessories, right-click on command line option

d. in the drop-down menu that appears, click on the "Run as Administrator" option

e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.

g. close the elevated command prompt.

h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.

i. click the photo icon display built-in Administrator account and connect to it.

If the problem is resolved, then you can create a new administrator account and check.

You can try to create a new administrator account by following the link:

http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

You can also try disabling the default Administrator account using the command

NET user administrator / active: No.

Hope this information is useful.

DRAC6 connect and then immediately disconnect

I provide a name of user and password in the login window, click on submit. The normal menus appear on the side of left hand and above, but then I am immediately disconnected, return to the login screen.

Because I can not connect I do not know how to start troubleshooting.

(I watched the IT crowd - is possible to turn the iDRAC works without turning off the server?)

Hi Paul,.

You can clear the browser cache and try again. If this does not work, you could update the latest firmware of the iDRAC (if not already done).

Thank you

Jean-Pierre

Corrupted user login

Corrupted user login

Hello everyone

I've been looking and after a few tutorials on this problem, but no work, so wrong here let my questions.

My computer has 2 users, 1 with admin Preobrajensky and another with no Preobrajensky, last week when I start the pc, it shows both users, but the admin account has no name or image, if I choose what it it shows the name and password empty, if I write downs he said tha the user, or the password is wrong , so basically im stuck with an account with no Preobrajensky.

I discovered that my admin account is corrupted.

So I follow some tutorials on how to solve this problem.

The way I found is to activate the real built in Administrator account and then access this account the regedit and difficulty the other account.

The problem is, as im stuck with an account with no Preobrajensky and start in safe mode doesn't give me access to this account with no Preobrajensky, I used a dvd a kick with her windows, open a command line and type net user administrator / Active: Yes, it shows a sucessful message but when I restart the pc and I start in safe mode I don't see another account to connect , these 2 accounts, so I chose the one with no picture and I have type administrator it displays a message saying that the account is not activated.

So im stuck at this point, because I really can not format this pc now and a restore point I would probably lose a few files I need, any ideas why I can't activate the built in admin account? Or I do something wrong?

So I have tried a few things and came up with a solution to do this, basically connecting the command net user administrator/active: Yes and a recovery that DVD did not work, I still didn't see built in admin account, then I looked at the login screen and I saw the small button in the lower left corner of the screen, and this button starts the utilman.exe.

So I thought I could use the same procedure to replace the files from the command line with dvd to replace the by the cmd.exe utilman.exe.

I tried in the login screen, it is a command line, here I did net user administrator/active: Yes and then I selected the user corrupted, the administrator typed and the boom! IM in.

Made a few changes and account working again :)

Note that, in the line net user administrator/active: Yes the underlined word, is written for the Portuguese version of windows, so if you have an English version change administrator or in any other way if your system's main language is different.

User login problem, immediately disconnects after 'welcome. '

Similar Questions

Maybe you are looking for