User profiles not available after restore O.S.

Similar Questions

• My logon user profile not working after a windows update, I can't connect to my computer.

  Last week I got an automatic update of windows on my computer (17 new). After that, I couldn't connect to my computer again. Loading the windows page, it shows two users icons profiles that were created and when I click on the profile of each user, it seems to start to run a function, but it does nothing. It just goes back to the same screen over and over again. I don't give myself the chance to write a password. I tried f8 system restore and system repaired without success. I have also run the comand line regedit and realized that the two user profiles are missing from here: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList, what can I do now?

  Hi, thanks for your help

  I finally solved this by removing a windows update that was playing with the connection of the user profile service.

  Here is the link https://support.microsoft.com/en-us/kb/3097877

  see you soon

• The feature "Display list of web app points submitted by a user" is not available in the free trial version?

  The feature "Display list of web app points submitted by a user" is not available in the free trial version? I can see it in the tutorials but its not available when I am connected.

  It is just named differently now. You should be able to add the {module_webappscustomer} module through the Toolbox Modules in the web page editor window, as shown below. Please note that the webapps function is available only for sites webCommerce. Learn more about the available modules and usage in detail here - http://kb.worldsecuresystems.com/134/bc_1345.html?bc-partner#main_Web_App_Modules

  

  Thank you

  Vinayak

• Create a Windows 7 user profile which resets after each reboot.

  I want to configure a limited in Windows 7 user profile that performs the following steps after EACH restart or disconnection:

  • Reset the background / theme
  • Reset the desktop icons / shortcuts
  • Network mapped reset drives
  • Reset saved passwords
  • Delete the data stored since the last session
  • Remove newly installed applications / block the installation of the application
  • Reset the print queue to empty - if it was not already
  • Reset the default printer
  • Reset the homepage Internet Explore & settings
  • Reset the screen resolution

  The idea is to create a profile for workstations in an office of the admin who works a bit like an internet café. They have a couple of shared workstations, a network printer, and they store the data on a file server and work on a local application server.

  The current problem is that they constantly record their passwords, remove network drives and change the General configuration of work stations (by chance), which makes it difficult for other users to work - that they do not recognize the look & feel and now don't know where to do what.

  I want to create a 'shared' user profile where they can log on, and everything looks familiar. All settings are saved as defaults and no matter what you do, as soon as you log out or restart, the parameters of return by default.

  I would appreciate help.

  Here are a few options:

  • Windows steady state (http://www.microsoft.com/windows/products/winfamily/sharedaccess/default.mspx). The product is supported for Windows XP and Vista, but maybe it works for Windows 7 too. Or maybe there is an equivalent Windows 7 somewhere.
  • Create a scheduled task that runs at boot time. You must run this command:
    Robocopy c:\Users\UserName.bak c:\Users\UserName/s / r: 1 w:1 /MIR /IS /IT /np 1 > c:\Windows\temp\restore.log 2 > & 1
    Note this:
    -Before starting, you must use the robocopy command in reverse so that it fills the C:\Users\UserName.bak folder.
    -The task must be run under the system account.
    -The task will run with the highest privileges.
    -Use during the testing of the installation log file. Subsequently you can pass you.
    -L' tool does not reset passwords. You must create a policy that prevents users from changing the password.

• Bluetooth is not available after upgrade to el Captain 10.11.4

  After upgrade of the El captain in OS X, version 10.11.4 the bluetooth on my MacPro is not available. How to fix?

  Bluetooth devices no longer meet

  See also: bluetooth not working not not after upgrade

• Satellite P70 - Has: monitor the profile not available/unable to define other profiles

  Hello.

  I have branch last week a new notebook from Toshiba (P70-A-11 (q) which has 8.1 Windows preinstalled on it.

  It seems that the device has a problem with the monitor profiles.
  When I look at the pictures on a unmanaged profile software, the images seem fine.
  Once I have import them to Lightroom or Photoshop, images get a yellow tint.

  That's what I see: left (Lightrom), right (Irfan) [dyed Yello | http://i1252.photobucket.com/albums/hh565/rockreactor/Clipboard05_zps092c5501.jpg]

  Unfortunately, I tried to add sRGB on my profiles but even after rebooting, I didn't see any change.
  From what I noticed the operating system doesn't have a defined profile at all before.

  I know that by selecting a profile sRGB is not a good solution and I should rather to calibrate my monitor.
  The question is why the profiles do not take any effect on my laptop screen, no matter which one I pick.
  Even there are some conflicts with the Intel display driver?

  Toshiba can support such a problem under warranty?
  I think that it is not my responsibility to get a screen totally not calibrated, or at least a portable computer without some suggested profile.

  Thanks in advance

  Hi mate
  > Toshiba can support such a problem under warranty?
  First of all guarantee covers any software problem. The warranty only covers hardware issues.
  But I don t think that this could be a software problem. I guess it's just a matter of settings.

  I recommend you to check if the option + use Windows display calibration "+ is activated."
  -Open the color management Panel.
  -Go to the Advanced tab.
  -Click on "change the system's default settings...". »
  -Go to the Advanced tab in color management - system default settings dialog box.
  -Turn on "Use Windows display calibration" and click Close.
  -Now go to the devices tab, change the profiles it and click on 'Set as default' as usual.

  You can also go through the built-in feature of Windows of calibration ("Calibrate display" button in the tab advanced)

• Satellite P305D - wireless not available after standby

  Occasionally, when my P305D-S8828 wakes from sleep the wireless card is not installed. So far a reboot solves this problem, but I need to be available after sleep. I'm sure I'm in the last laps of Toshiba, but should I look on the site of MFG. card driver updates.
  Thank you

  It's good idea with the WIFI driver update but I have checked support US the site and unfortunately there is no updates.
  What version of BIOS has your laptop?

• Bluetooth not available after update of Windows 10

  I have problems with my Yoga 260 after that windows update 10. Bluetooth is not available even in Device Manager. Any tips?

  Problem solved. Under system services, Bluetooth was arrested. Re start the service and solve the problem.

• Delete a user account, not available from the contol panel user account. Windows Vista Edition home premium

  I have an administrator account that I want to do standard, option is not available.

  I want to delete this account, not available.

  I tried to go to the Management Console Microsoft Help and support,

  When is open the page is empty, the left pane indicates the root of the console but it is empty.

  I tried to search, type in MMC and command promp open.

  I am at a loss.

  Hello
   
   
  1. by chance your computer is on a domain?
   
   
  Let us create a new user account with the administrator account and then make changes to the current administrator account and check.
  
  See the article below to learn how to create a user account.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could Calendar services not available after restarting LDAP problem?

  I followed the installation guide:
  
  https://wikis.Oracle.com/display/CommSuite7U2/communications+suite+on+a+single+host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
  
  I have correctly installed and configured the Server Update 2 Oracle UCS Sun7. Calendar works (if I don't reboot the server).
  
  
  However, when I reboot the server, calendar service is not available.
  
  
  Important information for when I installed Oracle UCS Dim 7 update 2 by following the installation guide:
  
  I noticed when browsing through files, there is already a folder "dsee6" for the Linux Oracle I started from. After the installation of the example for the Oracle Linux 5 with GlassFish install, I had to download a new directory server. By following the instructions on page 7 of the listed installation guide above, I did another folder "dsee7". I wonder if I would have never downloaded this new directory server by following the instructions on page 6 "obtain software". In fact, the installation guide does not mention where to find the directory server, so I went to the site of delivery and figured it out myself. in any case, in the section 'Installing and configuring directory server', #3, I was instructed to "mv dsee7/opt/sun/directory. In this folder, / opt/sun/directory/bin, there is '. '. "/ dsadmin" utility that can be run. This serves to do many things with the directory server, including start-up. This is how I started it:
  
  CD/opt/sun/directory/bin
  . / create/var/opt/sun/directory/dsins1 dsadm
  . / dsconf create suffix '0 = isp.
  
  Also, I downloaded the delivery directory server - Oracle Directory Server Enterprise Edition 11 GR 1 material Patch Set 1 for Linux x 86-64
  
  Then, I found myself running to implement:
  
  . / dsccsetup ads - create
  . / dsccsetup war-file-create
  $. / dsccsetup cocoa-reg
  . / dsccsetup State
  
  Then, it seemed that dcss agent is registered in the cocoa.
  
  So, if we pass to come to page 9 of the installation, "Preparation of the directory" guide, I ran this and prepared the directory. After installation is finished, I could restart the server directory without any problems, as long as I do not restart the machine. I would like to restart the server directory as follows:
  
  CD/opt/sun/directory/bin
  . / dsadmin stop-domain domain1
  . / dsadmin start-domain domain1
  
  However, if I rebooted the machine, I could always start and stop the server directory as shown. But the calendar Services were not available.
  
  The only reason I question this LDAP server that can be the cause of this is because at one point, I had configured the services to run at startup. I followed these instructions:
  
  https://wikis.Oracle.com/display/CommSuite7U2/start+and+stop+scripts+for+communications+suite+%28Linux%29
  
  I use a VMSphere client to host this set upwards. So, given that this point the configuration of services at startup, I rode hanging at the rear so that services are more fixed upward to run at startup. But when they were, and I restarted the machine, I could see 389 ldap errors in all directions. So, which drive me to roll my snapshot in effort to try to correct the ldap errors. I no longer get LDAP errors as I drove my instant return. But, as I said, I have no more services, including LDAP, to start Protocol started as shown in the above link that tells us how.
  
  After restarting, I run these commands to get the server up and running:
  
  Start the GlassFish server:
  CD/opt/sun/SUNWappserver/bin
  . / startserv
  
  Web start (mail server I think):
  CD/opt/sun/comms/messaging64/bin
  . / Start-msg
  
  Start LDAP (directory server)
  CD/opt/sun/directory/bin
  . / dsadm start/var/opt/sun/directory/dsins1
  
  Start Mysql
  CD/etc/init.d
  . / mysqld start
  
  All these commands complete without problem. I can connect on the web of convergence, I can hit the Managing Director, I can connect to the GlassFish administration console, and I can see my calendar folder when I hit him in the web (http://myServer.com/davserver/dav/home/userName/calendar/).
  
  So, in summary, I was wondering if anyone knows if it assumed that second directory server is causing problems since I started with Oracle Linux 5 and Oracle Linux 5 seems to have the dsee6 file already installed with it. Would be - why my calendar services do not start after reboot, but work before the reboot?
  
  
  (Also, all my messages to keep deleted.) Can someone please send me an email if someone Oracle is deleting my messages and tell me why they are removed? )
  
  Published by: ntfytim16 on March 5, 2012 07:41
  
  Some of my steps were unserviceable. Cleaned them is easier to understand.

  You stop/start the GlassFish server container:

  https://wikis.Oracle.com/display/CommSuite/Calendar+Server+7+Administration+Guide#CalendarServer7AdministrationGuide-StoppingandStartingCalendarServer

  Joe

• ORACLE is not available after Windows update

  I need help of DBA. I have 11g installed on windows server 2003. over the weekend windows has pushed an update to the server and restarted the server. I use it for applications of the apex. My apex is delay when you try to connect with IE. So I tried to connect to sqlplus in sys. I get this when I try to check that the port is open:
  
  
  SQL * more: version 11.1.0.6.0 - Production on Mon Dec 15 11:22:26 2008
  
  Copyright (c) 1982, 2007, Oracle. All rights reserved.
  
  Enter the user name: sys as sysdba
  Enter the password:
  Connect to an instance is idle.
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  SELECT DBMS_XDB. THE DOUBLE GETHTTPPORT
  *
  ERROR on line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session IDs: serial number 0: 0
  
  don't know what to do. I'm is closed until the apex is up and running.
  
  Thank you
  JP

  SHONET wrote:
  I need help of DBA. I have 11g installed on windows server 2003. over the weekend windows has pushed an update to the server and restarted the server. I use it for applications of the apex. My apex is delay when you try to connect with IE. So I tried to connect to sqlplus in sys. I get this when I try to check that the port is open:

  SQL * more: version 11.1.0.6.0 - Production on Mon Dec 15 11:22:26 2008

  Copyright (c) 1982, 2007, Oracle. All rights reserved.

  Enter the user name: sys as sysdba
  Enter the password:
  Connect to an instance is idle.

  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  SELECT DBMS_XDB. THE DOUBLE GETHTTPPORT
  *
  ERROR on line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session IDs: serial number 0: 0

  Try this,

  sql>startup 
  

  Put here the output of this command. It should propose, if the database is open, the open database.
  HTH
  Aman...

• Windows 7 update history not showing after restore the Image of external hard drive

  I just restored windows 7 from a system image on an external hard drive.  When I used windows update after restoration update history had disappeared, although I found the updates in the updates installed, I wonder if something is wrong and if all my updates are in place and why did do that AND, can I GET BACK. ?. ?. ?. Everything seems to work fine... /.
  Thanks and let me know.
  Dave

  Hello

  The version history is just a list containing the results of the applied updates and non-operational systematics
  importance. The installed updates is the important file that shows what updates have been installed.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• No fade not available after Unsharp mask

  I have an action I use successfully for several years, notably with the PS CS5 64-bit.  Part of the action is an emphasis, then using Fade Unsharp Mask it changes brightness mode.

  Now I suddenly find that it does not work on some images... telling me that the 'Fade' command is not available.  Even if I do these commands manually (without the action and do anything else) bland is gray out and not available.

  Everything still works fine with my 'normal' images, which are files TIFF 16 bits converted from RAW with Capture One Pro.  These files are approximately 125 mb in size.  The image where I first noticed this problem was a multi point recorded in a PSB (almost 600 mb in size) file.  Then, I created a file PSD of this image (155 MB) and BLAND was still not available.

  And no, I do not have ANYTHING between performing the Unsharp mask and try to find BLAND in the Edit menu.

  I tested this during more than an hour now (on two different computer facilities, as well running CS5 64-bit and Win7 64 bit) and other than the size of the file, I don't see anything else.

  The file size might have nothing to do with this?  That's the only difference I see between an image work and not another job.

  (I am aware that I could use the layers palette to change the blending mode to luminosity, but it won't solve my problem).

  Any ideas?

  Thank you!

  Eldor

  You can not Fade bound a command on a layer that has a layer mask. You have to UN-link the layer mask to the layer pixel before fade is enabled...

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• X1Carbon does not start after restoration of the USB

  I have a new X 1 carbon 3443CTO Win8/64. After the configuration and test, I wanted to give it to one of my users so I did a "factory restore" using recovery media created by following the guides posted here and elsewhere:

  Control the media of Panel\Recovery\create etc.

  Went as expected. When I ran the recovery - I have taken a step further and called Lenovo as the step that calls for repartition disks reported ambiguously: 'No' (keep existing partitions) reported that a partition is not found "required" Yes seemed exaggerated. The tech told me to proceed by Yes.

  Once the recovery is complete - the system has rebooted. Restarted in the Boot Manager - I chose HDD0 and was immediately referred to the Boot Manager. I called Lenovo and referred to my existing case and told me; "Well do it all again" I did. Same result.

  So - I have created another USB key from a whole new 3443cto carbon X 1 and ran in recovery - same result.

  I then created another set of recovery on a new USB - same result media.

  When I access training with Advanced\Command prompt the windows directory, program files, etc are all there, but nothing I do (Ran BCD fix mbr etc.) will only boot disk.

  Any ideas?

  Today, I called Lenovo and the only choice that gave me was back which I guess I do.

  Question - is a downgraded supports or has a return Service support has deteriorated since last year?

  Before leaving the office, I decided to repeat the exercise once more. This time, I used USB 3.0 500 GB drive that I created last night. I ran the option "update files". When he finished the system booted Windows 8 However he presented me with an opportunity to enter a name and a password. The previous credentials did not work, nor null credentials and there is no option to create a new account.

  I have re-run recovery, this time choosing to keep partitions and basically do a factory instead of reformatting redefined and.

  Once completed, the system booted Windows 8 and the possibility to choose the country. At that time, I have dagprogramm off the system. I guess it's back to the new factory.

  My hypothesis is that in the course of the original tent to refresh something has gone wrong with the drive and running BCDedit solved the problem? Who knows?

  In any case-problem solved. What worries me is that never once in 3 calls, I did Lenovo has someone at - he tried to help me solve the problem. I am the author of the decision - I choose servers, desktop computers and laptops. We use Dell servers and desktop computers the Thinkpads for laptops.

  Support IF Lenovo has become this bad, I'll start to buy Dell laptops. I think I have to raise my w/Lenovo support.