Users with remote sesson issues

Similar Questions

• 16.0.2 Firefox is not compatible with the zone alarm Forcefield AGAIN. Please, help users with that. No current positions

  Before I updated to the current version, I checked for "reserves" and found nothing to indicate that the Zone Alarm Extreme Security, ForceField was not compatible with the Version 16.0.2. If I had known that I would not have updated. Y at - it no use for those of us who have this problem. ? The only post I noticed on this problem is 'closed' and dated about 8 months ago.

  Thanks for the reply, the old Fox!

  I agree with you 100%. This occurred without fault to each new update of Firefox.

  I wish that Firefox had warned users of the incompatibility issues with ZA ForceField, as they have done with other problems before users downloading the latest version of Firefox.

  Thank you also for the link to the "release notes", which I didn't have before. It is a help in the future.

  Warm greetings,

      Boudica
  

• Request remote assistance issues. Cannot connect, check network or group may have cancelled etc.

  I have XP, Vista and 7, customers have.  Remote Assistance allows to work with both.  Now, it will work with either, but it does not work with one of the users with 7.  Help, I tried everything.  A few months ago I could access it, now I can't

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the accurate and complete error that you receive when trying to use remote assistance?

  In response to the questions above could help us help you better. However, you can have a look at the following article which deals with a similar question.
  Remote assistance may not work if Internet Connection Firewall is enabled
  http://support.Microsoft.com/kb/310608

• How to check if group policy is set on "don't sign is not on the users with temporary profiles?

  I work through the problem addressed in https://support.microsoft.com/en-us/kb/947215 (click here), namely: after creating a new user account, attempts to to the fail with the error "user profile service logon. User profile cannot loaded ".

  KB recommend checking to see if group policy is set on "don't sign do not on users with temporary profiles»

  How do I do that?

  General information...

  I inherited this computer.  Previously, he served as both a team of personal and school computer.  In my view, it is configured to be part of a homegroup, which I cannot access.  I intend to disable homegroup connections.  But I take my time to make sure I'm not breaking the functionality I need.

  Group Policy above have anything to do with homegroups?

  Despite this, the residential group, Control Panel does not appear should be the group policies.

  I find Microsoft Web pages that refer to a Group Policy Editor (gpedit.msc).  I only found on this computer (yet).

  Happy to the point of resources to the thread if you give us a link

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• Unable to reconcile the user with the email AD to certain words field

  Hello

  When we try to recon AD a user with the e-mail as white id field, we are able to draw the user in the IOM. But, if the user has a different value as any part of the sentence "Do not to enter the e-mail address for this user' or 'identification of email without standards (id with abc@xyzcom'), we get an error during the recon.

  "ERROR: invalid email address." Email must contain and. (DOT) »

  The AD team wondered why the email in the AD field must be null instead '' do get not the e-mail address of this user'.

  Please provide some input.

  all documents where I can point them or my reference?

  Thank you

  You can update the property with any regular expression you want. This is what is displayed in the property system.  For the issue of recon, if the e-mail address is not marked as required in your recon fields then Yes, it may be empty.

  -Kevin

• 5.1.7 server on El Capitan: create a user with a personalized folder location

  I've recently upgraded to El Capitan on my server once an apple advisor told me that 5.1.7 server had a bunch of bug fixes for Open Directory(which I plan on using down the road). Given that the Working Group Manager is not compatible with 10.11...

  Is there a way to create a user with a personalized folder location? When I create a user on the server, I can choose to create a home folder, with or without limitation in the disc or make the service of the user only. My problem is that I have no way (that I know) in the window of creating user to change the location of this folder.

  I tried to create a model of a user with a basic 'tailor-made' folder location (Volume/promised Pegasus/Home 2016 / etc...) but when I create the user, the home folder is not in the specified path.

  The "work around" I found for this batch of user is to create in the default location then move them on my raid Promise Pegasus, change the path to the advanced option to the each user and reassign the appropriate permissions.

  It is not so much a problem if I would deal with users 10. But I have to manage/create about 130-150 users every 5-6 months.

  I guess that there is an easier way to create a user with a custom home folder location. It would make sense that apple removes the Workgroup Manager and does not replace its characteristics.

  Best case scenario is that I do evil and do not hesitate to let me know if this is the case!

  Thank you

  Francis

  I may be wrong, but it seems that Workgroup Manager version 10.8 works under El Capitan: I can certainly start the application and query users / groups that are there.  I guess maybe it's on the machine as a rest to be updated periodically since days Lion... but it also shows that if you can find a copy, you may be able to run on your machine.

  HTH

• Yosemite: Why 'Shares and Permissions' displays 2 all users with different privileges?

  Some folders and files inside my user folder sharing and permissions like this:

  

  I can remove the user from "search...". "(a user who has been deleted and no longer exists) but I don't know what to do on both"all"users with different permissions. I can't delete the one with custom privileges. Help!

  Solved by Leroy Douglas. See What are these custom privileges?

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• You need permission to perform this action - field user with file rights. Please advice

  You need permission to perform this action - field user with file rights.

  I can't access folder on drive network even with domain administrator of error do 'you need permission to perform this action. "
  I would be very grateful if you could please advice, I can't change folder\files in this folder, even with admin rights.
  Thanks in advance
  Saad Ali

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance. We have a team to help you with this guy's questions.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Cannot delete the account of a user with administrator rights

  I want to remove a user who has administrator rights account.  Win XP machine has two users (Administrator and a user name) that both are of type of administrator account.

  I you as an administrator and should be able to change the other named to Limited user account, but for Limited is greyed out.  The option to delete the named account is not present.

  How can I delete this account, leaving only administrator?

  Often, I find that using the command line commands gives errors better when you can not do something.  Try the following:

  o bring a window prompt (start-> Run-> "cmd")

  o enter the following command in the window:

  net localgroup administrators

  o that it must return a list of all users with administrator privileges.  You should see the built-in user 'Administrator' and your other user (assuming that both have administrator privileges).  To remove administrator privileges from the user (assuming that this another username is "Joe"), then enter the following command:

  net localgroup administrators Joe/remove

  If this is not possible, an error no doubt will provide you with enough information.

  HTH,

  JW

• User with limited XP Home Edition privleges can not access an external hard drive

  I can't set up an external hard drive in Windows XP Home Edition so that a user who has 'Limited' privleges can access.  The user receives the access denied message.  I tried to configure this by starting in safe mode.  I shared the unit with everyone.  If I'm the administrator user then it can access the drive.  The troubling question is that this system has been configured with the user having limited privleges as well as access to the external drive in the past.  I recently removed Norton antivirus and replaced by MS Security Essentials and I'm so glad I did.  But now it's problem arose.  Any help would be greatly appreciated.

  You probably just need to change permissions for access of the disk and/or subfolders.  The following article describes how to do this:

  "How to set, view, change, or remove special permissions for files and folders in Windows XP"
    <>http://support.Microsoft.com/kb/308419 >

  The bad news is that this article was written for XP Pro and you have XP Home.  This means that the 'Security' tab, which is at the heart of the management of permissions is not present during the implementation of the properties of file or a folder on your computer. (Or y at - it an option to disable Simple file sharing).  The good news is that if you start your computer in safe mode (repeatedly tap the F8 key when your computer starts) and log on as a user with administrator privileges, you can then obtain access to the security"" tab.  Once you have access to this tab, you can give "Everyone" permission to all of the disk if you wish.  Once you set the permissions as you like them, you can restart your machine in Normal mode.

  HTH,
  JW

• HP Officejet Pro 6830: my HP officejet pro 6830 trouble with remote printing

  I have set up my printer without problem. I tried to use my remote printing, and it won't work. I looked up using HP, called and all they said was that my laptpo need $299.99 to fix my computer! They never tried to help me learn how to use my remote printing. They just said if I wouldn't spend money that they could not help me and hung up. Disappointed by HP to send me in a foreign place to get money from me. When they discovered I was old they wanted nothing to do with me, I have same ezplained I was new to the computer for learning. Please help me or I have to pay the money foreign co. ! Thank you.

  Hello @toby456,

  Welcome to the forums of HP.

  I'm sorry to hear about your experience on the phone.

  Looks like you're done by talking to a third party.

  HP has a Department of Service of Cloud Computing.

  Dealing with remote printing and how to make part of their support.

  It's a service support, that is, there is no charge or fee.

  Please contact our Cloud Services at 855-785-2777.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Opening hours:

  Monday-Friday 08:00 - 23:00, sat 09:00 - 20:00 -
  Monday-Friday 07:00 - 22:00, Saturday 08:00-19:00 - CST
  Monday-Friday 06:00 - 21:00, Saturday 07:00-18:00 - MST
  Mon - Fri, 05:00-20:00, Saturday 06:00-17:00 - PST.

  If you prefer to read how to get started, please click on the following link.

  Getting started with ePrint

  If you have any other questions please let me know.

• try to install a printer and receive a message error «software cannot be installed...» To resolve this problem, log off and log in as a user with administrative privileges.

  original title: help installing a printer

  I try to install a printer on my computer and continue to receive an error message indicating that the "software cannot be installed using the command" run as ".". To resolve this problem, he told me to sign out and then sign in as a user with administrative privileges. I am the owner of this computer and that you have had for several years. I need to know how to solve this problem. Can anyone help?

  Hello

  have you tried right clicking on setup.exe printing software then run as administrator?

• Update user with Org units using NSAPI

  We have a requirement where we need to update users with different organizational units with an external system. The integration guide indicates an NSAPI that may be used for this operation, no one create/update. It just says that we must use the XML from a details person Get API and use it as a query XML.

  The problem that we face is to find where to place the new Org Unit details in the request XML. If someone knows about this detail.

  Is this still the correct API for the fulfilment of the condition or we're looking at the wrong thing here

  That's why the requirements a bit clearer.

  If you are to be drawn from the external system rather that push to the PSAB, then I think that using the above mentioned SDK might be better suited since it is for the most part it that it was designed for, however, is probably a bit more complex to implement than the REST API.

  If you're always going the way of the use of the REST API, based on what I've seen and read that this API does not account of associatedOrganizationalUnits , which is where you update the members of the ORGANIZATIONAL unit, I can't see another way for you to do so through the current REST API.

  A third option is to create a service within the CPSC updates a user using the tasks Directory included in the plan, this service can then be consumed using the API of requisition, the downside of this is that there is a demand generated for each update.