using a DGND3700 router as extender wired

Similar Questions

• Use the second router to extend the network to Time Capsule

  I have a v7.6.7 running Time Capsule 1 TB and older airport. I'm hoping to add a second router in a new location, and I use an ethernet cable from the TC at the new router (TP Link Archer C5), updated to the latest version of the firmware. The IP address of the TC is 192.168.1.1.

  I have set up my router C5 as follows: allocation of IP 192.168.1.199, value DHCP = off, and I connect a cable between the TC ports and port WAN (not Internet) available on the C5. In the C5 wireless settings, I tried both using the TC SSID and pw and creating a new SSID and pw. In both cases, the network will work for a short time, but eventually the entire network, including the TC, stops working. I made no changes to the parameters of the TC on any trial.

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router? If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router?

  Yes. That would be the basis of a network of mobile type.

  The key for a roaming network parameters are:

  • The 'primary' router must be configured as a router. In other words, it must have active NAT and DHCP services.
  • All other routers used in a network of roaming must be reconfigured as a bridge.
  • All routers must broadcast a Wi - Fi network that uses the same network (SSID, aka) name, and the type of wireless security, and the password.
  • All routers must be interconnected by Ethernet. To provide Powerline adapters using an Ethernet connectivity should also work.

  If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

  Should not really which is the main in the roaming network.

  I think at this point, your current circuit line. To check that, I would suggest that you consider to bring back the router C5 in the same room as you have the TC. Then connect it directly to one of the LAN of the TC ports. Complete the entire upward to a mobile network and test it. If everything works, bring back the C5 in the desired location, and then try again.

  If it fails, then the circuit line will be tested to check that it provides a solid 'Ethernet' connection between the adapters.

• Printers network returns to 'Use printer offline' system recovery (extended). Windows 7 SP1 all versions

  Printers network returns to 'Use printer offline' system recovery (extended). The questions appear to affect all versions of Windows 7 (32 and 64 bit).

  Printed documents are queued on the local PC, waiting for the printer to come online.
  The box can be seen by selecting devices and printers from the Start button. Double-click the printer service (usually the default printer) to open the printer window. Click on the "Printer" menu item in the window of the printer. The 'use printer offline' will be checked.

  It requires a privilege to administer to uncheck the 'use printer offline '. The printer begins to print queue elements. The option "Use Offline printer" will remain off until the PC then wakes up from his sleep.

  Printer has a static IP address and the last HP printer driver. is connected by WiFi to router. PC is connected to the router or use the WiFi. The question of the effects only PC under Windows 7. It seems to be very similar to that discussed in the article KB 934455 Vista.
  Does anyone know of a solution for the PC under Windows 7?

  Hello

  I suggest you to follow the steps below and check if it helps.

  Method 1:

  Try running the fixit tool from the link below and check.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2: To select a default printer

  a. open devices and printers , click the Start button.

  b. right-click on the printer you want to use, and then click set as default printer. (You will see a check box on the printer icon, which means that it is now your default printer.)

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  You can check out the following link and try the suggestions provided by Robyn-technician support and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/printer-stops-working-shows-offline-at-random/0e88380e-4e7c-41c0-bcc8-6bf8afa32e7a

  Hope this information is useful.

• I could use an airport extreme to extend my wifi network

  I was able to connect the extreme of the Airport via an ethernet cable to my sky router and use it to improve the signal? If yes how I would go about setting up

  I was able to connect the extreme of the Airport via an ethernet cable to my sky router and use it to improve the signal?

  Yes, if you understand that the Ethernet cable must remain permanently connected at all times.

  If yes how I would go about setting up

  Locate the AirPort Extreme right in the middle of the remote Valley where you need more coverage of wireless signal

  Connect an Ethernet cable from one of the LAN ports on the router from sky on 'o' WAN port on the AirPort Extreme <-->

  Run the Apple installation "Wizard".

  Assign the same exact wireless network name that uses the heaven to the AirPort Extreme router

  Assign a name of device for AirPort Extreme

  Enter the exact same word of wireless that uses the sky router

  Enter the password to confirm

  Click next and wait a minute, while the installation wizard does it all for you

  Click done when you see the installation complete message

• OfficeJet Pro x476dw: wireless without the use of a router direct printing

  Is it possible to print directly to the printer without the use of a router?

  Hi Brad,

  Welcome to the Community Forum of HP.

  OFFICEJET PRO X 476 AND X 576 SERIES MFP User Guide said yes

  See Page 118

  Reference:

  All-in-one HP Officejet Pro X476dw

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• IP address of the Sony Bravia TV in collective housing is 1 stop from that used by the router.

  Address IP of the Sony Bravia TV in collective housing is 1 stop from that used by the router and McAfee network card. TV connects to the router but it says server is not available and cannot access media files. I removed the TV from the group home and now cannot get back at all, even if the NIC McAfee says it's there.  How can I return it to the correct IP address? Either by the way TV works well with my laptop and the IP it is in agreement with the router.

  Thanks for the reply,

  The Fixit on this link is out of date. However, I did find and try the collective dwelling and routines network Fix - it without success. I used both WIn 7 trouble shooters and they find nothing wrong.

  None of the suggested steps seemed to apply. All necessary services are running.
  The workaround is to connect my laptop to the HDMI on your TV and the lap top gives access to the video files on my HD desktop... not always satisfactory if the files are fragmenting as its loses sync.

  I need a way to get the desk top to see the correct IP address for television.

• I'm having a problem on line when someone else uses the same router, error message: there is an IP address conflict

  Original title: I'm having a problem online when someone else uses the same router I have...

  I bought a new laptop with windows 7 premium. I connect to the internet through an external modem dsl and a wireless belkin n router. My daughter has an Android and uses the same connection... The problem is that we cannot not be online at the same time... If shes online using his android I can't connect using the laptop and if Im online using the laptop, she can't get online using his android... The error message indicates that there is a conflict of IP address... And sometimes says that there is a dns error... How can I fix this problem so that we can surf the net using the same connection?

  Hello

  Router is the gateway to the Internet, and it assigns the IP address for different devices. With the error message, you have so many IP address conflict, it seems that the IP address is not assigned correctly on the router.

  I suggest that you turn off all devices, reset the router and turn on the router. Once that is done turn the whole one and try to connect to the Internet.

  For assistance on this, you can contact your router manufacturer or Internet service provider.

  Hope the information is useful.

• By using the SHIFT key to extend or paint line

  Hi all. I am using a very old version of Photoshop for the past 10 years and I'm used to use the SHIFT key to extend a line or line of paint. By that, I mean I use the paint to make a point, and then hold down the SHIFT key and make another point elsewhere and which creates a straight line. I just bought CS6 and this feature doesn't seem to be the case. Is this something that I need to enable a preference?

  Thanks much for any help.

  DOH! I had always "use pressure for opacity" checked. When I unchecked, the functionality of the SHIFT key worked fine! It would take hours of futzing all about understanding this one. But too bad I can't access the pressure/opacity feature and continue to use the post - but perhaps one cancels the other is.  You're a genius, just a nice guy to take that time with me. C very much appreciated.

• How to create a wireless using TP-link router &amp; TC

  I have a TP link router wireless (TL-MR3420) & also TC. I use internet through a router. now, I want to use my TC wireless for backup and also a (wired) printer for wireless printing. can you please let me know the configuration setting for above networking.

  The Capsule can only connect to a network using the wireless if you have another router Apple providing the network, so the TC cannot connect to the signal of the TP-Link wireless router wireless.

  The TC must connect to the TP-Link router with wired Ethernet wired, permanent. Connect the cable to one of the LAN ports on the router TP-Link on 'o' WAN port on the TC <-->.

• Please help put in place the second router Wireless extender

  Morning everyone,

  I bought a Linksys WRT 1900AC recently to replace my Linksys E2500. The wi - fi signal is much stronger, but he can barely do in my room. As such, I would use my old E2500 as a range extender. I have already run the ethernet cable (cat 6) from the router WRT 1900AC main to the E2500.

  After spending 2 days by reading the documents, I still have the problem to connect two routers. My understanding of routers and networks is limited.  I would appreciate your help.

  Here's what I want to accomplish:

  1 cable connection to the internet is through (E2500 PC); OR

  2. connecting to the Internet via wifi

  3. If possible, using the same SSID for both routers

  Please give me instructions step by step, if you can. My understanding on this subject is poor.  Thank you for your help.

  Noos.

  PS. If you have a easier and/or a better way to extend my range, I'd like to hear it.

  see if the instructions here helps. Follow configuring lan lan step by step and you should be able to do work. http: http://www.linksys.com/us/support-article?articleNum=132275/www.linksys.com/us/support-article...

• WRT320N cannot not get IP address - using only 1 - no internet access - wired port hang web configuration pages

  You just bought Linksys WRT320N as a replacement for Netgear MR814.

  Cannot connect to internet using Linksys WRT320N.

  Installation program:

  ISP: Cox Communications (cable)

  Firmware: v1.0.03 build 010 July 24, 2009

  1 Wired - port 1 - for Windows XP SP 3 Dell Desktop

  Attempts to install:

  1 tried to set up using the installation CD.  Spread the slightest error with error 302: internal error. tried this 3 times

  2A through the reset, power off, procedures.

  3 Ping 192.168.1.1 = success

  4. connected to 192.168.1.1 via web browser

  5. set the MAC Address = MAC address of the computer

  6. the MTU value = Auto (1500).  Also tried manual 1492

  Could not get the IP address by using the version of IP address and IP address renew.  Address Internet IP still = 0.0.0.0

  Note that the web page will be still stuck after perfoming some actions (such as after switching between the tabs).  Message at the bottom of the browser is "Wating for http://192.168.1.1/Status_Router.asp.  And the hourglass on the screen away.

  Note that the old Netgear router still works fine and I am currently connected to the internet via the Netgear router.   I'd appreciate any help getting the new Linksys router connection/operation/obtaining of internet and IP address.

  Thanks for your help.

  I do not know where I was unclear: you wrote before you used the function of the cloning mac address on the WRT to clone the MAC address of the PC. In this way the WRT "pretended" to be the PC if you connect to the internet port WRT to your modem.

  However, the PC is not the device you used before you connect to the internet. The PC was not the device that was connected to the modem before. If you connect the computer directly to your modem it will either be an IP address. There will be no internet.

  The problem is that your ISP only allows you to have an active internet connection single at some point. If you plug in a different device with a different MAC address to your modem this device won't get an IP address. That you have connected the Netgear router to your modem and you have internet, then you need to clone the MAC address of the Netgear router. This is the device that is connected to your internet connection and it is the MAC address that your ISP has locked your internet connection.

  So, once again: clone the MAC address of the router netgear (internet or WAN port MAC address) of your Linksys router. Then the Linksys's router Netgear and your ISP should accept the Linksys router. The netgear router should have a status page in the web interface, showing you the right MAC address to be cloned.

• two computers using the same router belkin wireless gave rise to the loss or crippling a slow internet connection, why?

  Two laptops in my house share a belkin wireless router. Every 10 minutes, when the two laptops are connected to the internet, one or the other seems to push the other off the connection. Then speed either decreases or the connection is completely lost. This occurs when one of the laptops is using Skype or download, but also just when both are normally surf as well. I've never known a wireless router not being able to manage two laptops before. Any ideas, anyone please? The two laptops running Windows 7 if it helps?

  Hello

  Did you change to the computer?

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I also suggest you to see link and check.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  You experience slow performance in Internet Explorer 9

  http://support.Microsoft.com/kb/2398082

• Using airplay on airport express with wired connections

  Hello world

  I think in a very special configuration and I was wondering if it would work or not.

  I have a Linksys router with 802.11ac ability now. I wish I had a pregnant airplay on my network, so I thought buy a used Airport express, connect the speakers to it and plug the Airport express via a LAN cable to the linksys router. I also think to turn off wifi on the Airport express so it does not disturb my 802.11ac network.

  So the question is: is it possible to have the airport base station to connect to my router Linksys on LAN and airplay works this way on the Linksys WiFi network?

  Thank you

  Zoltan

  In theory, it works... but you will have to set up the AirPort Express to create a wireless first, then go back and turn off the wireless feature.

  Ensure that the Express is a common pattern of A1392, or the previous version of A1264. Much A1084 most, it's not what you want.

• L10: Using a simple click for extended desktop

  Hello

  I use a satellite L10 for presentations. Is it possible to implement the extended one-click Desktop (a! via .exe, .reg,... file, etc.)? (A quick access key would be nice too)

  The problem is that if I start the computer without the external monitor / projector connected etc it is the only screen (normal office) and I have to right click, look for the option right etc) I want one button on my desktop / taskbar. (or shortcut)

  Thank you
  JP

  Hello

  Bob is right. Please see page 5-2 92 user manual. You will find explanation how to use the FN key combinations (hotkeys).

  Good bye