Using a mobile data can affect my memory storage

Hello.. Using a mobile data can eat my memory of the iphone?

You mean the storage capacity?

NO.

Is there an error message or a problem you are having?

Tags: iPhone

Similar Questions

  • Impossible to use mobile data.

    This morning I upgraded to 5.1.1 and since then I am unable to use my mobile data. I used them just before I updated and worked, but after the update the phone seems to fail to use the data. I have used other SIM cards and I met the same problem. I can activate my data, but may not use it. (the sign of the 3g does not appear to be)

    Asked my service provider for a new connection APN. Works perfectly. Thank you for your help.

  • Accuracy of mobile data use

    Hello

    I recently made a switch of carrier and the new carrier data usage reports average higher than I used to.

    I usually never checked the mobile use of the data in the settings, so I have no experience on how accurate it is usually. I've always had 3GB included and reaches about 1 to 2 GB maximum.

    So, I recently reset the statistics to compare the unusual high numbers reported by the carrier and it turns out that:

    My phone displays 40 MB of data transfer while my carrier charge me 300 MB transfer!

    I asked the carrier and they said that their figures are correct and their charges are what matters. They also told me I should quit by comparing it to the use of mobile data expressed by my phone, it is not accurate at all.

    I am aware that there are certain circumstances why the carrier numbers are higher, for example their billing rounds up to the next full 64 k, transmission, errors that cause returns etc. I expect 10% of the higher numbers, or perhaps 20% higher, but in my case, it's almost ten times!

    Anyone experienced something like this before, or knows how to solve this problem? How are the statistics for you?

    Best regards

    I have not had the problem.  Two iPhone-6 units, both on Verizon 1 G plan.

  • I have problem with my Mobile data

    I am using Lenovo X 2 - AP

    and I've updated for android to these daily 5.0 version

    (why, I don't have internet or ADSL I have update my mobile data, I download update on yesterday and install the update on this morning (GMT + 7))

    Everything works fine.

    Then I try to update my applications.

    The problem starts at these points, while I update my apps

    Some applications can't be updated due without internet connection

    but there are always 4G icon on mobile data in the top left

    so I order my internet connection using facebook or chrome applications

    and I found my dose of mobile data does not

    If I try to use USB Personal Hotspot and I found that my mobile data can share in my computer

    but I don't know why I can't use my mobile data on my phone

    Sorry for my bad English skills

    I hope you guys can help

    Thank you

    OK everythings fine now

    I factory reset my phone and it is working

    Thank you

  • When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

    When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

    Disable the iMessage?

  • How to use mobile data for large app download data

    How to use mobile data for large app download data

    How can I set big data

  • How to download using mobile data instead of a Wi - Fi connection

    Dear Sir.

    I use iPhone 6s. I would like to ask for your help as to how I could use mobile data to download for the software updates. There was always a prompt message to inform that I could download when connected to a Wi - Fi network.

    Hoping to hear from you soon.

    Thank you.

    Sorry, you can not. WiFi or iTunes.

  • Satellite A100: To receive data can I use the remote port IrDA?

    Hello

    I have an A100 which has infrared, which is used for the remote control supplied with the laptop. I was wondering if this infrared receiver can be used for other devices (e.g.: mobile phone) other than the remote control.

    I checked the control panel and Device Manager and both have no infrared information, but I thought that it would be always necessary even for the remote control.

    Help, please.

    Thank you.

    Hello

    I think that it s not possible to use the IrDA remote control window to receive files or data.
    I wonder how it should work if you don t have IrDA options in Control Panel.

    If this option is not available in the Control Panel, you cannot activate the IrDA and you can't assign a download or download the IrDA connection. So in my opinion you can't use it as a connection port.

    Unfortunately ;(

    But I found external solutions. If you want to use the IrDA, you can buy a USB IrDA key. I didn't test this device, but other people on the net have used it and it works.

  • iPhone facebook messenger using mobile data

    Hello

    My iphone 6 (with IOS 9.2, I think) uses a large number of mobile phones with video calling Facebook messenger some time connected Wifi. I have assist disabled Wifi. I installed MyDataManager and it shows me that, within a period of half an hour this morning, I used the Wifi 1.5 and 0.5 GB of mobile data. My mobile provide agrees that I used a lot of mobile data today. Which is the only time today I did something data-intensive.

    I saw this happen several times over the past two months where I was sure I was on wifi, but used a lot of mobile data.

    Looking for the forum and can "t find all other references to FB Messenger doing so.

    Anyone experienced this? All solutions?

    What you wanted to hear?

    You know what's using your data. Do you use FB Messenger a lot? Turn off mobile data as a test for a day. If your mobile data fails, you have your answer/solution. Video calls are huge for the use of the data.

    The phone should be able to detect and select wifi on the cell data when both are present, but sometimes it isn't. If your signal wifi cycles or drops during your call video, data of the cell comes into play to keep you going. Even if wifi is disabled.

    Disabling global cellular data or only FB Messenger can be your best way to control this.

  • Location using mobile data

    My mobile data is turned off and I am connected to my WiFi. Whenever any application uses location my phone connects for a second to the network and uses mobile data, mobile data are always off. As I use a prepaid SIM, I have to pay for the use of data in 15 minutes, even if my phone connects just for a second. Either I can disable location or delete the APN to solve the problem for now, but it is not a real solution. Someone has an idea?

    What you can try instead of delete the APN is to edit and check the APN type. If the APN type contains "extra", delete and save the APN.

    The GPS in the phone supports assisted startup and can use the mobile network to get your site faster than a normal GPS. Remove "extra" may prevent him from doing it.

  • 5.0.2 Android Xperia Z3 can not detect mobile data

    I just update my Sony Xperia Z3 lollipop 5.0.2. After update, I can't detect my mobile data, but there is no problem with the WiFi connection. Can someone tell me how to solve this problem. Please help me. I really need to use the Internet

    Settings > more > internet settings > accept

    to enter them manually, google "android apn settings __name of your network___.

    settings > more > mobile networks > access point names > more

  • Why can't I connect to my mobile data? T.T

    I always turn it on, but I can't use social applications :/ I checked my phone credit, I still have money... But I don't understand why my mobile data would not operate ://

    @Arye26

    You must check with your corporate network, in some countries/carriers, prepaid plans will have certain amount of data for some social applications and some data for other applications, perhaps it is the question.

  • How can I use only cellular data then a Wi - Fi network?

    I don't want to use the cell data only when the Wi - Fi connectivity is poor (for example turn on help Wi - Fi), I want to use cellular data 100% of the time. Why, you ask quite rightly? Because I have a data plan unlimited cell phone and I just want to play the channels of information and Netflix on my TV via AppleTV using AirPlay.

    AirPlay is only active when connected to a Wi - Fi network. I don't live anywhere near fixed services of any kind. I would watch my Netflix or other video services on my TV rather than on small screen of my phone.

    Are there any combination of parameters that will allow me to achieve this goal?

    Are there any combination of parameters that will allow me to achieve this goal?

    Sorry, but no.  The Apple and Apple TV routers require a wired Ethernet connection or a standard Wi - Fi connection.

    You can take a look at a router 3G / 4G... something like these for example:

    http://www.TP-link.com/en/products/list-4691.html

    Good idea to check to make sure that your provider supports supported router before you buy if.

  • iPhone 5 battery runs very quickly when using mobile data

    When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

    iOS: version 9.0.2

    See the following article:

    https://www.Apple.com/support/iPhone5-battery/

    In addition, download the app from the battery life and see what it says about the health of your battery.

  • Minimum virtual memory is insufficient to start using XP home. Can Msn check my registry database?

    My system is very slow start. It's a Dell Demension 10 years using XP home/SP3 8200. The processor remains active for more than an hour and I get "virtual memory minimum insufficient' guard and auto MSN it increases... I use the free "Windows Live One Care" supposedly take care of my system. My small research made allusion to the 'Registry cleaning tools' need to reset virtual memory by using Msconfig to complex for me to understand and achieve. Is it remotely possible or can MSN send me something simple to achieve this?

    Webcam Live One Care is no longer avaialable: http://windows.microsoft.com/en-US/windows/products/security-essentials/onecare?SignedIn=1

    I don't suggest you use Registry cleaners: http://www.edbott.com/weblog/2005/04/why-i-don ' t-use - Registry cleaners /

    Fix low virtual memory warning: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/low-virtual-memory-warning-message-windows-xp/135d4a57-aa30-4a10-9401-883e0a7cc0af

    I think adding RAM to your model that Dell is not recommended because it is not too profitable... you could check with Crucial.com.

    Did you spring for a new computer?

    Good luck...

Maybe you are looking for

  • XW4300: CPU for XW4300

    What are the processors to the motherboard supports? Can I use Intel Core 2 Duo E4700?

  • N Ultra Range router WRT160n Pluse

    I can't connect my N Ultra Range Pluse WRT160n router wireless for my laptop. List undefined network only & it taken address IP begins with 169 and it does not require the network also share key. But I can connect to another laptop & my laptop can co

  • Dell Optiplex 780 compatible graphics cards?

    Hi all I'm new on the dell forum. I love my Dell Optiplex 780 SFF and last year I bought a "Sapphire AMD HD6570 2 GB DDR3 Lite Retail PCI-E graphics card" which worked but was too big for the case. Now, I am looking for the best compatible graphics c

  • Epson Action Laser 1600 Printer vs Windows7

    I called Epson and they indicated the last was supported for this printer driver for Windows 3.1, but I used it with Windows 95, 98 and XP. Now, I'm just checking if there is a way to use this printer with Windows7. Thank you Denali

  • Design WLC? -1 master to multiple WLC passant

    OK I'll try to be quick... Currently, we have 1 WLC controller 4402-50 (in our "non-critical" data center in the office).  This WLC control all points of access to 9 sites, all connected to the office (WLC) through links of qmoe from 10 to 50 MB. We