Using NetMonitor - Device_Unavailable via Fglam remote

Similar Questions

• Problem connecting via Windows Remote Assistant

  I have a problem connecting to my PC mother via Windows remote assistant. I checked the setting and services run. I get the following error:

  Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not	Detected
  Contact your network administrator or ISP (ISP) Completed
  Could not establish a Remote Assistance connection

  
  Could not establish a Remote Assistance connection Detected

  There is no problems detected on this computer

  Completed

  Problems found	Details of detection
  6 Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Detected
  Contact your network administrator or ISP (ISP) Completed Windows cannot communicate with the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854). The computer or the service that you want to achieve may be temporarily unavailable. If the device or resource is nearby and you have access, make sure that it is turned on and connected to the network.

  6 Could not establish a Remote Assistance connection Detected
  There is no problems detected on this computer Completed There could be a problem on the computer that you are trying to connect to. If the person you help running Windows 7, ask them to click Troubleshooting in the Remote Assistance program. If they run older versions of Windows, you can ask them to use the Internet connectivity evaluation tool from the Microsoft Web site.
  Details of detection

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:

  
   
  Settings for Teredo
  ---------------------------------------------
  Type: customer
  Server name: teredo.ipv6.microsoft.com.
  Client refresh interval: 30 seconds
  Client port: not specified
  State: qualified
  Type of customer: teredo client
  Network: unmanaged
  NAT: restricted
  Special behavior NAT: UPNP: no PortPreserving: Yes
  Local mapping: 192.168.1.7:57043
  External NAT mapping: 69.248.92.196:57043

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:   Settings for Teredo --------------------------------------------- Type: customer Server name: teredo.ipv6.microsoft.com. Client refresh interval: 30 seconds Client port: not specified State: qualified Type of customer: teredo client Network: unmanaged NAT: restricted Special behavior NAT: UPNP: no PortPreserving: Yes Local mapping: 192.168.1.7:57043 External NAT mapping: 69.248.92.196:57043

  Network Diagnostics log

  Name of the file: 398A911D-DDA8-41E3-9FF3-4E36B200143B. Diagnose.Admin.0.etl

  Other newspapers and Network Configuration

  Name of the file: NetworkConfiguration.cab

  Computer name:	USER-PC
  Version of Windows:	6.1
  Architecture:	AMD64
  Time:	Friday, May 16, 2014 14:31:02
  Publisher details

  Detecting network connectivity problems.
  Package version:	1.0
  Publisher:	Microsoft Windows

  Keep in mind that if the person seeking assistance uses a router (instead of connecting directly to the modem), then you will need to redirect port configuration.  The request when she sends uses the IP address of his computer, but that the IP is not always accessible to the public.  For example, IP address of my PC is 192.168.0.4 (the 4th computer on my network at the present time), and this address cannot be used to connect to my PC.  You know my public IP address, so, I need the configuration of port forwarding to direct your incoming connection to my public address during my internal IP address (called traversal NAT, or network address translation).

  There is a reason, I generally recommend free tools that use HTTP transport instead, like Team Viewer app free (for personal use).

• Tandberg Edge 95 MXP Password reset via the remote control

  Hello

  I try to reset the IP password via the remote control and still get the complaint that the password must be at least 8 characters and the number. I tried all combinaiton of 8 characters and 1 number, 8 characters and 2 numbers, 6 tanks and 2 numbers, 4 characters and 4 numbers, number 8 characters and 1 number 1 and so on. Is there something special about looking for the system?

  Thanks for the support!

  PS. When I telnet into the system, it shows TANDBERG Codec Release F7.2 PAL / SW Release Date: 2008-10-31, so I guess it is 7.2.

  Do you know if strict password is enabled or not?

  By default, that is, unless you have turned it off at some point, which will ask for a password at least 15 characters that contains 2 lowercase letters, 2 caps, 2 numbers and 2 special characters.  You can check by connecting to the endpoint using SSH or Telnet and runs the API command below:

  xConfiguration StrictPassword

  Here are the steps to reset the password to access IP on a TANDBERG MXP endpoint, I suggest that you try to use the API to change the password by logging on to the endpoint by Telnet or SSH instead of the remote control. The most recent software MXP is F9.3.4, suggest you also improve your point of termination to the latest version to mitigate the security issues with the older software. You can contact TAC and advisory security cisco-sa-20140605-openssl to get a key to unlock so you can upgrade your MXP to software F9 of reference, from there, you can upgrade to F9.3.4.

• Problem creating DEV_PORTAL via the remote control

  Hello
  
  I would really appreciate your help to meet slot problem:
  
  in OBIE11g when creating patterns via the remote control, all the patterns, I chose to be created are working well except DEV_PORTAL, which throws the error
  
  SQL error when connecting with thin driver (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=HOST_NAME) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = SERVICE_NAME))): ORA-01017: invalid user name password login denied
  
  The problem is this role/user/password is correct, because:
  
  1 other patterns are created by using the same credentials (with SYSDBA rola)
  2. I can connect (via SQL developer) to database using the same settings and everything works
  
  I encountered a similar problem on the forum under
  
  Creating DEV_PORTAL schema for Oracle Forms
  
  but without any solution working :(
  
  Thanks in advance

  Why you install DEV_PORTAL scheme, for the installation of obiee 11g select Oracel Business Intelligence in the performance of the remote control. It will install only two MDS and BIPlatform patterns.

• 22D133B: replaced charger DVD - no play, pause, stop, etc via the remote control

  Hello

  I have a 22D1333B in for repair because it would not play the DVD. I replaced the charger DVD (part No. 75040787) and the unit will now play DVDs ok but the DVD section will not respond to the remote control.

  All other TV functions operate via the remote control without any problem. It's just the DVD section.

  I cured the last of them by exchanging the PCB on the new DVD unit with that of the old unit, but this certainly isn't the way to address this problem.

  I downloaded and installed the software on the site of Vestel and updated the software for the Toshiba site. The fault remains.

  Any help to solve this problem would be welcome.

  T.I.A.

  In my opinion the new DVD drive isn't fully compatible with the remote control (type) RC1910 that was included in the box.

  I think you should get in contact with the authorized service provider to fix this

• How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  Apple Tv has the conference room mode turned on causing the message to appear.  Turn it off:

  On restrictions of airtime and the mode of the conference room on your Apple TV - Apple Support

• Error: Cannot copy Admin$\system32\dwrcs.exe when trying to use DameWare NT Utilities card remote Commander for remote control a workstation.

  Original title: impossible to copy to Admin$\system32\dwrcs.exe.

  I'm using DameWare NT Utilities card remote Commander for remote control a workstation.   Other workstation remote control works fine.   On the workstation with the fact that I'm having the problem the following message appears:

  Cannot copy
  C:\Program Files\Dameware Development\Dameware control\DWRCS.exe mini remote

  TO

  \\workstation-name\ADMIN$\System32\DWRCS.exe

  System error: 5

  The system message:

  Access denied

  I don't think it's a matter of DameWare since other workstations are accessible.   I think that this could be a Windows problem with a kind of security.  Anyone know?

  Hello

  Your computer is connected to a server, or a domain?

  You can follow the steps in this link:

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Access denied messages when the connection to the remote PC

  If your computer is on a domain network, I'd recommend posting your query in the TechNet forums.

  Hope the helps of information.

• Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looks like the manufacturer was "Total Training. I can't find the title to Adobe.com

  http://totaltraining.com/store/Photoshop-CS5-extended-Essentials/

• Is it possible to create a new file using the XML via java Script?

  Hello everyone,

  Is it possible to create a new file using the XML via java Script

  • I have xml information that need to use for file name, size.
  • Based on xml file we can create a new file in InDesign with java script?
  • Kindly help me if anyone has an idea about this.

  I use InDesign CS4 on windows 7

  Sample file is attached below.

  Kind regards

  Siva

  <UpdateAd>
  <AdId>3403699</AdId>
  <Width type="mm">91,79</Width>
  <Height type="mm">80,00</Height>
  <ProductionCategory>4</ProductionCategory>
  <BookedCCIColors>sw</BookedCCIColors>
  <WorkFlowType>PDF</WorkFlowType>
  <CustomerNumber>652224</CustomerNumber>
  <CustName1>Erich Prang</CustName1>
  <Description/>
  <Description2>R</Description2>
  <UpdateIns>
  <Titel>RHZ</Titel>
  <Publication>B2</Publication>
  <RunDate>26-07-2011</RunDate>
  <Zone>H30</Zone>
  <KDDATEN>nein</KDDATEN>
  </UpdateIns>
  <WorkflowStep>IR</WorkflowStep>
  <Proof>No</Proof>
  </UpdateAd>
  
  

  

  Try this:

  var f =File.openDialog ();
  f.open('r');
  var xml = new XML(f.read());
  f.close();
  
  var myDocument = app.documents.add();
  myDocument.documentPreferences.pageHeight = xml..Height+"mm";
  myDocument.documentPreferences.pageWidth = xml..Width+"mm";
  var rect = myDocument.pages[0].rectangles,add();
  rect.geometricBounds = myDocument.pages[0].bounds;
  rect.strokeAlignment = StrokeAlignment.INSIDE_ALIGNMENT;
  rect.strokeColor = myDocument.swatches.item("Black");
  rect.strokeWeight = 1;
  myDocument.save(File(f.path + "/" + xml..AdId + ".indd"))
  

  Substances

• What are the solutions for remote use unauthorized computer via a virtual private network?

  Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" without authorization.   Called internet provider.  They claim that they do not deal with the configuration of the virtual private network. Tech said there is more than one device connected to my computer!
  I went to "Computer management" and delete all except myself as a user and the administrator.  Obviously, too late as a person UNKNOWN has defined itself as "NT Authority\Authenticated Users".  Locked computer: would not recognize my password.
  Formatted drive / reinstalled windows.  Able to use the computer for "allocation of 7 days; my computer then froze again.  AT and T Tech indicates that UNKNOWN use of my computer and no recourse.  Are there solutions to the unauthorized use?

  Hello

  I suggest you post your question Forums Technet for assistance on this issue.

  Windows XP Service Pack 3 (SP3)

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Connection to remote desktop using proxy and gateway desktop remotely?

  I have setup a gateway desktop remotely using Windows Server R2 2012 server. I use Remote Desktop gateway as an intermediary between to offer remote desktop session more than 443 because 3389 is blocked in several places of the customer.

  However, I encountered a problem with a customer that the network seems to use a web proxy.

  Is is possible to set up remote desktop to connect via web proxy? If so, how? If this is not the case, does anyone have any suggestions on how to provide a remote desktop session through 443 on proxy for situations where you don't control the client PC or network? RemoteApps allows access through the web proxy when you use Remote Desktop gateway?

  The error message is below to:

  Your computer cannot connect to the remote computer because the web proxy server requires authentication. To allow traffic not authenticated to a desktop gateway server remotely through your web proxy server, contact your network administrator.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Using Cisco VPN with desktop remotely

  Hi, I work with many customers that use Cisco VPN for remote access.  Unfortunately the Cisco VPN does not work well with my VPN IBM client so I can't have both running on my computer.  So, I thought that I would like to install the Cisco VPN on an old machine, connect to this computer via desktop to distance and VPN in the network from the customer via the VPN.

  Well, who does not work either.  As soon as I connect to the network via the VPN Remote Desktop client loses the connection.  Can someone tell me if it works as designed (WAD) or if there is a secret of configuration to operate?

  Thanks in advance...

  John,

  When you connect via VPN to the network client on the remote computer, the connection RD proper case?

  I think it's because the VPN connection that you have drawn on the client computer is configured to encrypt all traffic, and that's why the RD connection to your computer of the drops.

  You can do a quick test... on the VPN client computer under statististics (VPN software) verification and check if secure roads is 0.0.0.0 (no split tunneling).

  If Yes... and if having access to the VPN server, which can be changed.

  Federico.

• Timeout problem has occurred by using striking images via camera Balser Scout IMAQ

  I'm new on this.  The scout Balser worked well with the SDK of pylon. The computer finds the camera via the MAE, but when I clicked the button 'grabbing', poped time-out error place after awhile. Then I turned back to the Viewer, the dead enjoy camera mast.

  Is there something wrong with my implementation?

  Lew,

  Check that the Windows Firewall is disabled. Also, the listed Broadcom interface does not support jumbo frames, so be sure to adjust the packet size used to 1500 bytes.

  Eric

• What port should be sent to use a vista home PC remote assistance?

  I use XP Pro and my daughter use vista home.  She has a d-link router.  What are the ports I need to pass in the d-link router, so that I can offer assistance remotely from my XP system?

  See you soon,.
  Greg.

  A much better, more easy and free solution is to use TeamViewer . You can monitor his computer and some ports must be opened. All she has to do is double-click on an icon and read you two sets of numbers. MS - MVP - Elephant Boy computers - don't panic!

• Vostro V131 using the Microphone via the headset.

  Hello

  I wonder if I can use my mic (3.5 mm jack) via the headphone jack of my Vosto V131.

  According to the German site, the V131 has a "combi" and a technician confirmed, too.
  But he told me that I should ask in the forums.

  But I have not found a way to make it work.
  The "Dell Audio" driver only detects the microphone in the headphones and I have not found anything useful in the Internet.
  And of course not only another device is listed in the menu "sound"and I can not change anything in the "Speaker".

  BTW, I found something interesting:
  If start "Dell Audio", then the Windos Soundmenu musicplayback quality changes as I have to switch between the playback and recording.

  Im looking forward to your answers
  Best regards, Chris

  Buschwald

  According to the German site, the V131 has a "combi" and a technician confirmed, too.

  That is right. the Jack is designed to be used with headphones iphone like that.

  

  Note that the decision-making has 4 segments that is not the standard configuration. If you want to use a standard microphone with it, you need an adapter, something like this:

  

  http://www.Amazon.com/headset-buddy-Smartphone-computer-BlackBerry/DP/B002SK66OY