Using products on multiple systems

Similar Questions

• How to use product recovery CD-rom?

  How to use product recovery cd-rom on the satellite A40 range?

  Hi Daniel,.

  To use the recovery CD, simply insert the first CD (assuming there are two) in the CD drive and then just turn on your laptop while pressing the 'C' key on the keyboard. This will cause the laptop to load a minimal operating system on the CD that will start the process of recovery of the product.

  You should also be an initial menu that asks you if you want to do a complete system restore or restore 'Expert'. The full restore will delete all of your 'C' drive and will then install the entire system (excluding all the extras you'll have to install afterwards). The recovery of 'Expert' will allow you to partition your hard drive before you install the operating system in the C"" drive.

  Kind regards

• ORA-01552: cannot use rollback for non-system tablespace system segment

  I'm getting following error, according to a previous thread under request.
  
  ORA-01552: cannot use rollback for non-system tablespace system segment
  

  select SEGMENT_NAME, TABLESPACE_NAME, INITIAL_EXTENT,STATUS
  from dba_rollback_segs
  SEGMENT_NAME                   TABLESPACE_NAME                INITIAL_EXTENT         STATUS           
  ------------------------------ ------------------------------ ---------------------- ---------------- 
  SYSTEM                         SYSTEM                         114688                 ONLINE           
  _SYSSMU1$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU2$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU3$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU4$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU5$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU6$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU7$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU8$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU9$                      UNDO_TS                        131072                 OFFLINE          
  _SYSSMU10$                     UNDO_TS                        131072                 OFFLINE          
  _SYSSMU11$                     UNDO_TS                        131072                 OFFLINE          
  _SYSSMU12$                     UNDO_TS                        131072                 OFFLINE          
  _SYSSMU13$                     UNDO_TS                        131072                 OFFLINE          
  _SYSSMU14$                     UNDO_TS                        131072                 OFFLINE          
  
   15 rows selected

  How can I get them online, I can get them online does this error?

  Maybe you should also mention that you make no effort to look for the error in the documentation online or anywhere else.
  You get this when your database uses rollback segments, and you have spaces of multiple tables.
  To be able to create spaces of multiple tables, you must first create a rollback segment in the system tablespace.

  That's why you get the error.
  The resolution is clear.

  Unfortunately, 99.9 percent of all the people posting here refused to make any effort to resolve errors.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• Cannot transfer or write emails. Using the linux operating system

  I can't write an email or send an e-mail sent. I use linux for operating system.

  Solved the problem. It was the program of Ghostery.
  Thank you for your help.

• My button "use as photo of system library" in photos is dimmed and I can't select.  Any idea on how to solve this problem?

  I found that photos must be defined as "use as photo of system library" in order to be able to have the clickable area in FCPX to then import media from him.  However, when I go into the photos to do, this box is also grayed out.

  Looks like the library is already defined as the library system.

  You have problems using the photo media browser?

  Russ

• Call a VI that uses the 'exec.vi system' with the LabVIEW runtime as adapter

  Hello

  My TestStand sequence called a VI that includes a call to 'exec.vi system '. When I try to load it in TestStand and if LabVIEW adapter is set to the runtime, I get an error message «Unable to load Vi...» ». If I change the map to the 'development system', then it works fine.

  Is it possible to use the 'exec.vi system' in a VI that is called by TestStand with LabVIEW run-time?

  Thank you

  Alex

  Hi Alex,

  In case you, you get an error-18002.

  The reason is explained in the following link:

  -18002 errors in TestStand

  http://digital.NI.com/public.nsf/allkb/D82FEAF0B4BA293A862575710053E252?OpenDocument

  Please take a look at # 2. This is your case.

  It will be useful,

  Regrads

• Product: Windows operating system ID: 256 symbolic name: WRN_INTERFACE_CHANGE_TIMED_OUT

  I am unable to get my laptop in STANDBY MODE and check for the problem, I got the info:
  Product: Windows Operating System: Event ID: 256: Source: PlugPlayManager: Version: 5.2: symbolic name: WRN_INTERFACE_CHANGE_TIMED_OUT:Message: Timed out sending notification of device interface change to window of "% 1".
  COULD SOMEONE LET ME KNOW HOW TO RESOLVE THIS ISSUE. WHEN I CLOSE THE LAPTOP, IT WILL NOT GO IN STANDBY MODE.
  THANKS TO ALL WHO COULD HELP SINCERELY.

  Salvation of Cox,

  1. what happens when you try to enter standby mode?

  2. you receive an error message?

  I suggest you to follow the steps from the link and check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Start immediately using the YouTube but system shutdown

  while I hours start to use you tube, the system closed immediately? My os is windows 7 starter using with wipro dual core Pc (evolution)

  Original title: restart on you tube

  Hi Anil,

  You are welcome.
  I am happy to learn that the problem is solved!
  Your efforts to solve this problem is appreciated.
  Thank you for sharing your information on the way in which you solved the problem.
  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
  Thank you.

• How to use the pc 610y system recovery CD

  How to use the pc 610y system recovery CD

  Hello:

  Please read the info at the link below... Recovery discs recovery section.

  http://support.HP.com/us-en/document/bph07145

• If we want only subscribe to Adobe Illustrator CC, is there an effect on our ability to continue using products other than Illustrator CS4?

  If we want only subscribe to Adobe Illustrator CC, is there an effect on our ability to continue using products other than Illustrator CS4?

  Hello karleas73464285,

  everything should be good.

  Best regards

  Maurice

• I am looking to buy the version of creative photography of cloud.  Will I be able to use it on multiple computers or just one that I buy and download it?

  I am looking to buy the version of creative photography of cloud.  Will I be able to use it on multiple computers or just one that I buy and download it?

  An allowed activation through registration in your AdobeID CC license on up to two computers at the same time.  You can install it and more, but you can allow only on two at a time.

• I would have used product become monthly again this month, thought that we should use this be paid a month ago. I don't want to use most. How are you?

  I would have used product become monthly again this month, thought that we should use this be paid a month ago. I don't want to use most. How are you?

  Hi Hyun,

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Kind regards

  Sheena