Usual re install Windows 7?

Similar Questions

• No sound after installing windows 10 MBP 2012

  Hello world

  Here's what I did.

  I have MBP 2012 with El Capitan on it.

  I installed windows on this 10. Here are the steps I followed.

  1. Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
  2. ISO file 10 Windows installed
  3. Make a key USB bootable but Bootcamp with drivers
  4. Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
  5. Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
  6. Installed Windows and driver loaded by installing bootcamp
  7. Everything works fine but the sound

  Tried, but failed

  1. Clean install of windows if partition bootcamp (error - no found boot device)
  2. Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
  3. Tried the update of drivers for the sound. However, did not

  Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.

  Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.

• Install Windows 7 on an iMac without Apple software

  I have 'experimented' with the installation of Windows 7 on iMac (20-inch 2.0 GHz Core 2 Duo, IIRC) mother and managed to enter an insensitive State and I'm trying to understand why. In short, the objective here is to determine how to install Windows 7 on an iMac (starting with a blank hard drive).

  A little history: MOM (and me) didn't like the Apple OS, so she was fortunately in Linux (CentOS 6) for a couple of years, but for various reasons, she now needs Windows. In the past, I installed Linux and Windows on anything and everything with a CPU, largely without major problems (so far). To clarify, install Linux was fine on this iMac, only Windows turns out to be difficult.

  One thing that seems to cause me a lot of trouble, is that - as I understand it: it's hard / cannot access all the options start at low altitude on an iMac (for example usual UEFI / BIOS stuff). Is this correct, or am I missing something?

  Another issue I have is that almost all the information that I find online made the assumption that the Apple OS is installed. This is clearly not the case for me - I've invested in Snow Leopard, a long time ago, but quickly decided it wasn't for me, erased the hard drive, installed CentOS and released the Snow Leopard installation media in the desert.

  The question I'm stuck, is the Windows 7 Installer refuses to install on the hard disk. He creates with happiness and format a primary partition, but gives the following error:

  Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu.
  

  
  

  If I could have access to all the low-level boot options, then maybe I could investigate this matter. Can anyone offer advice?

  Here is the optimal solution to the problem: buy a Windows computer. They are cheap. A Mac with OS X installed can run Windows using Boot Camp Assistant for a system dual-boot. Only then do you get drivers Windows requires to be used with Apple hardware.

• Unable to connect to google after installing windows 10 "secure connection failed".

  I installed windows 10 today.

  now, every time that I can't get to google/youtube to firefox, internet explorer and opera.

  I get this error:

  "Secure connection failed".

  The connection on www.google.com while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem."
  

  I would appreciate help, google and youtube are rather important

  Sorry for the delay, long day away.

  With this many cross-browser issues, can you confirm that your system clock date, time, and time zone are all correct? SSL validity checks are time sensitive.

  If you see a globe, I think that you are unable to use an HTTPS address. Usually Firefox displays a padlock or a "!" icon in the shape of triangle on a HTTPS address depending on whether the certificate withdraws or has a problem.

  Is there a code in parentheses, separated by underscores in the error page? If so, could you copy and paste this code.

• Install Windows 8 on Satellite P300

  As usual rushed in and installed Windows 8 on satellite P300. What error - slow, loss of functionality. How to get back to Vista was preinstalled or is there a way I can fix it to run windows 8.
  Processor Intel (r) Core (TM) 2 Duo CPU [email protected] 2.4 GHz, 4.00 (2.99 usable) GB RAM 32-bit system, x 64-based processor.

  Satellite P300 is plu laptop comes with Vista, but also supported for Win7. Unfortunately, it is not supported for Win8 so, in my opinion, there is no sense to install Win8 on it.

  Win7 works perfectly on this machine so if possible use Win7 on it. in case you want to use original Vista, you must install recovery using recovery DVD image. This way only to s to have factory settings once again.

  The question is: do you have the recovery disk?

• How to install Windows XP Professional on Toshiba laptop?

  Hi all

  I'm asking on behalf of a friend who is a Computer Phobic and has the same brand and model of Toshiba laptop than me. He would like to go back instead of Windows Vista business to Windows XP Professional.

  Its hard drive is the hard disk from Western Digital WD 1200BEVS. He told me that when he went to install Windows XP, it came with no HARD drive. I don't know if I can quote the chipset here, but here it is anyway. The chipset is an Intel(r) ICH8M ultra ata storage controllers-2850. All the advice in a simple format would be gratefull. He downloaded the bios unsuccessfully and nlite to work on a computer with some help of a computer technician on a thumb (flash) drive)

  I'm someone who can help thanking on behalf of my friend who is a Computer Phobic and does not have an interweb connection.

  Usually, if you write about these issues you inform us also what model of laptop you have, or that model As your friend.

  Please don t get me wrong, but on this forum, you can find hundreds of threads with the same theme and very good answers and solutions. You might be looking for this forum if you can find some similar thread?
  Problem missing driver SATA and this driver must be loaded before installation of WXP begins.

  But before we start the discussion is portable s friend supported for Windows XP Home edition?
  Did you check the Toshiba download page if the drivers of Windows XP Home edition are available?

  Out of curiosity: a your friend recovery disk created?

• Cannot install Windows 8 on Satellite L750 - CPU compatibility problem

  Why can I not install Windows 8 Preview of consumption on my Toshiba Satellite L750-22 x?
  I get an error of processor compatibility.

  Intel i3 M380 2.53 GHz

  Hello

  The Internet provides some details on this error message.
  It seems that to install Win 8 CP the CPU must support PAE/NX/SSE2 features

  Never execute Bit ([NX bit | http://en.wikipedia.org/wiki/NX_bit]) allows the marking of memory pages as non-executable.
  Streaming SIMD Extensions 2 (SSE2) is an earlier standard that is supported by Intel and AMD CPU. This is why all processors that support NX would also support SSE2 too.

  Usually, this allows the XD (for Intel processors) or NX (for AMD) in the BIOS should disable this error message.
  But if it is not available in the BIOS, then either the CPU is not supported this feature or the BIOS does not support this option.

  According to the page Intel Ark Intel Core i3 - 380 M supports the Execute Disable Bit feature. So maybe the BIOS does not support this feature
  http://Ark.Intel.com/products/50178/Intel-Core-i3-380M-processor-

  It seems that you have to wait for the new BIOS

• HP keyboard mapping inorrect freshly installed Windows 7 / XP on HP Pavilion 500-202eo

  Hello

  After you have installed Windows 7 Ultimate on HP Pavilion 500 - 202eo, I noticed that the HP keyboard connected is incorrectly mapped. I had exact same questions with the mapping of the keyboard with new operating system installs on oher systems as well, but couldn't really find a solution for this. In fact, certain symbols appear to move; While normally, where usually I had to press Alt Gr + 2 I got the sign @, I must now press shift. The? + button now product - character, while pressing on - product button /, <>product button------etc. I tried to put the keyboard in 'Norwegian', which is the layout of my keyboard, but nothing helped. It seems that I must be missing some type of a pilot or a patch, which is present on each preinstalled system that I own, but somehow is missing on installed fresh, even if there are no conflicts in Device Manager. I have the same problem on the XP installation. Any suggestions?

  Hello again once, I managed to solve this problem by specifying the correct keyboard language in Control Panel. I didn't need drivers after all.

• Problem installing Windows XP on the Satellite A200-1VF

  I'm trying to install Windows XP with SP2.
  I created a new installation of Window XP with nlite disc and included the Storage Manager to get access to the hard drive.

  I started with this new record of installations and allows to manage my hard drive.
  Then it is formatted and files have been copied to the hard drive. After the 1 st reboot. takes place.

  Windows XP logo appears logo disappears after a few seconds and it's time that the installation of 1 st screen.
  But instead, it appears a box with a red X and an error message "for the given process is not enough quotas for virtual storage or the pagefile" 2 seconds later, the system will reboot and restart the installation and gets the same message and so on.

  The system is already flashed with the BIOS V5.30 for XP.
  To continue installing XP any help is appreciated.

  Thanks Klaus

  Hello

  just a quick question: is the recovery for Vista work? I mean, it sounds like a hardware problem, but usually if the machine worked well before, it must be another problem. The image that was created with nLite is maybe defective...

  Would appreciate comments on your part.

  Welcome them

• Laptop using Windows key to install Windows on another CD of license

  Hi all.

  I'm from Portugal, if my laptop came with a recovery dvd that installs Windows XP Home Edition in Portuguese language.
  My question is: is it possible to install Windows XP Home English from a different CD (no not via the dvd recovery) and continue to use the license key of windows that comes with the laptop?

  for example, is the license key for laptop for Windows XP Home Edition (any language) or specifically for Windows XP Home Portuguese?

  Thankx in advance!

  Hello

  NO, it is not possible to s. The key that is located on the cover of the CD is not activation key for Windows OS. This key you use to activate the Microsoft OneNote, which is preinstalled on the image of Toshiba.

  More info. :
  Usually, the image of Toshiba is already activated and you n t need to activate the image of Toshiba.

• Can satellite A100-011 - I install Windows 7 64 bit?

  Can you please tell me if I install Windows 7 64 bit where can I find the drivers, because they are not listed on the Toshiba site.

  Thanx.

  Akis

  Hi Akis,

  > where I can find the drivers, because they are not listed on the Toshiba site.
  That of the point because the drivers provided for this model, you can find on the official website of Toshiba. There's no other place where you can download the pre-tested and official drivers for Toshiba laptops.

  Theoretically, there s no problem to install Windows 7, but you don't have to search the drivers yourself on other sites like:
  [www.intel.com]
  [www.realtek.com]
  [www.atheros.com]
  Etc.

  An alternative you can try 64 bit Vista drivers. Usually they should work on Windows 7 too.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Qosmio G20 Vista drivers? No need to install Windows Vista

  Hello
  I'm new to this forum. My name is Francisco and I live in the Brazil. I have a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
  To do this, you must perform a clean installation of Windows Vista. The drivers for network (Intel PRO100), audio (Soundmax), TV (Toshiba PCI Tuner), modem (modem of toshiba), Alps pointing device are installed directly from microsoft. You must install the Toshiba, Toshiba Bluetooth nvidia display driver (monitor and stack), driver Toshiba flash media, toshiba RAID texas (drivers and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
  You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.

  Below some pictures of my desktop of the G20 screen:

  http://www.rabayjr.com/Vista/myqosmiog20screen1.jpg
  http://www.rabayjr.com/Vista/myqosmiog20screen2.jpg
  http://www.rabayjr.com/Vista/myqosmiog20screen3.jpg

  And here is an example of the use of backgrounds animated with Windows Vista, deskscapes called dreamscene.
  It is in pause mode
  http://www.rabayjr.com/Vista/myqosmiog20screen4.jpg

  To perform a new installation of windows Vista:

  Please, download drivers Toshiba RAID here:
  http://www.rabayjr.com/Vista/drivers/RAID.rar

  1 copy the contents of this archive on a floppy disk, CD, DVD, or USB flash drive.
  2. Insert your Microsoft Windows Vista Edition Bootable DVD.
  3. turn on your computer and press F12 to display the start menu.
  4. Select the option to boot from the CD/DVD drive.
  5. on the first Setup screen, choose your language options, and then press "next".
  6. press on "install now".
  7 type your product key and then press "next".
  8. accept the license terms by checking the box, then press "next".
  9. when he asked "which type of installation that you want", press "Custom (advanced)".
  10. when it is asked "Where do you want to install Windows?", make sure that your media containing the Toshiba RAID drivers is connected to the computer, and then click on "Load driver".
  11. navigate to the location you copied the RAID drivers then press 'OK '.
  12. the installation program will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
  13 make sure that the TOSHIBA RAID driver is selected, and then press "next".
  14. continue the installation of Windows Vista as usual.

  Now, you will need drivers Toshiba for your Qosmio G20:
  See the information of Device Manager:
  http://www.rabayjr.com/Vista/qosmiodrivers1.jpg

  Drivers:
  1. SD memory controller
  http://www.rabayjr.com/Vista/drivers/SD_memory.rar

  2 battery and Bluetooth monitor
  http://www.rabayjr.com/Vista/drivers/bluetooth_mon.rar
  http://www.rabayjr.com/Vista/drivers/bluetooth_stack.rar

  3 display Nvidia GeForce Go 6600 driver
  http://www.rabayjr.com/Vista/drivers/nvidia97.52.rar

  4 Texas FlashMedia controller
  http://www.rabayjr.com/Vista/drivers/flasmedia.rar

  And finally the Toshiba Utilities:
  Toshiba Configfree
  Toshiba Assist
  RAID utilities
  Remote Control Manager
  Toshiba SD Memory utilities

  That's all...

  So, I say to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.

  Hope this helps the people who need and want to install Windows Vista Aero on their computers Qosmio G20.

  Post edited by: FranciscoJr

  Hi Francisco,.

  Thanks for this info. It is good to hear that it works.

  Good bye

• Need driver disc to install Windows 7 on Tecra S10

  Hello

  I have a Tecra S10 - 11I with Windows Vista and I buy the seven Windows Update but when I try to install it, a message told me to install the driver from the cd/dvd drive (it is a Teac DV w28s-rt) and can't find it, can someone give me the link to download it or show how I can install windows 7 on my pc

  Thank you. (Excuse me for my English)

  For disk drive optical feature you n t need to install an additional driver.
  You can use your optical disc drive, the usual use of DVDs and CDs?

  Can you maybe send a screenshot of this message?

  As far as I know when you start the upgrade (upgrade disc put in ODD) you should see THE menu.

• Satellite P100 - 194 PSPA6E does not start and will not let me install Windows

  Hello

  I have a problem with my Satellite phone, witch, I got from my brother. I don't know what he did with it, but he does not know.

  When I start the PXE - E61 "Media test failure, check cable" appears. In the BIOS I put in the directory Boot LAN mode on the last position, but despite this failure E61 appears.

  I tried to reinstall Windows XP. The laptop started from the CD and the blue screen appeared and loaded XP drivers needed. But at the end of it, when you enter normally on the menu to choose where to install windows, the screen is black and in the upper left corner a small beam blinked on and outside and nothing happens plus.
  The same thing happens when I leave the laptop HARD drive and start again from the XP installation CD but this time without the HARD disc logically.
  So I thought that the HARD drive is broken and I put it in my desktop PC to test. I installed XP on the drive HARD Satellite in my PC, which worked without problems in my PC. So, I come to the conclusion that the HARD drive is not broken.
  And my BIOS Satellite detects my HARD drive and displays the name of it.

  But what is the problem with the laptop when it is not the HARD drive and BIOS show the good name of the HARD drive? Can someone help me please?

  Hello

  The story is very strange boyfriend generally that the PXE error if the laptop tries to boot from LAN. But in the case where starting LAN source in unavailable, the PXE error appears and shows this message.

  Usually, the BIOS passes LAN Boot option because the other options are not active. This means that the CD/DVD drive does not any bootable disk and the HARD disk is dead.

  So, as you can see you hypothesis was right that the HARD drive could be faulty

  In any case, try to access the BIOS and set it to the default settings save changes and then try to reinstall Windows XP.
  You might also try another HARD drive, I know as your fist HDD recognized correctly but it s worth a try to test the 2nd HARD drive.