V6 fires-to top when the camera connected instead of newly installed v8

Similar Questions

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• display the text in the navigation bar when the user connects

  Hi all

  I'm (still ) on Apex 4.2.6.

  Currently, I have in my page templates, the following code snippet:

        <div class="logoBar">
            <img src="#IMAGE_PREFIX#themes/theme_125/images/logo_.png" />
            <h1><a href="#HOME_LINK#" id="uLogo">#LOGO#</a></h1>
          <div class="userBlock">
            <span>Username: &APP_USER.</span>
            #NAVIGATION_BAR#
          </div>
        </div>
  

  I have an obligation to display the user name (APP_USER) and of the company the user works for point Application AI_COMPANY, only when the user is connected. When the user is not connected; instead of these elements, I must show a connection link. Well, I know how to display a link to the login page, only when the user is not authenticated, using the navigation bar. Currently, when a user is not authenticated; the page shows: username: person. It's because he's in my page template. How can I show only the user name when the user connects? And then only display the name of the company?

  My first thought was to add an item in the navigation bar. But these elements comes in the form of links. Is it possible to add a navigation bar element and let it display as text? Of course, I could write a dynamic action on page 0 to remove the link, but I'm looking for a nicer sollution or better.

  I have apreciate your help!

  I take it, you use the same model of your home page and login page.

  You could use 2 different models or get out your elements in your model and put them in page 0.

  You can then make them conditional based on the number of page

  Gus

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• How to enter an image on a screen when the camera is moving

  Hello

  I know it's a basic question, but I fight here...

  I have a show of studio based with a monitor on set showing green with the idea that I touch still images in there... that would be good, BUT...

  There are some photos where the camera comes out and / or moving during the shooting... usefully presenters are sometimes before the corners when the camera moves

  I guess I use the features of follow-up (AE or PP?) but am faced with scaling... the lower is always the end of the shot that begins with the presenters at the back of the studio walk forward... How can I get again that I am FORCED to 'reduce' at the same pace it as the camera (it's not that smooth traction) fate...

  Any help / tutorials greatly appreciated...

  Thank you

  Alan

  

  I would investigate camera tracking in AFX

• Revel may automatically add photos imported to the iPad with the camera connection kit?

  Any help would be appreciated.

  Revel may be implemented in the automatic import of your camera. Go to settings and select a name from the title of the "automatic" import library Alternatively, you can select the files to import and to manally. Revel is not taken directly from the camera connection kit, however.

  Guinot

• I can't access my Virtual Machine when the internet connection is disabled...

  Hello... I'm newbie here... I don't know if Iam asking stupid

  question or good question... Well I can't access my Virtual Machine

  When the internet connection is off... it is quite common... or

  obnormal... In my area there is a lot of electricity cuts... and

  interruptions of network of regular power 5 hours ago

  cut... and power cuts not notified... So I can't access the internet

  constantly... Is there any solution for this... Thank you

  your valuable suggestions...

  Thank you and best regards,

  Indianmale.

  Just to clarify - you are unable to connect using the default management tools to the servers in your office.

  Have you tried to remote desktop, telnet, ssh, otherwise?

  I'm kind of thinking he's trying to communicate to the world for the validity of a SSL key

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• How to configure applications 'Find my iPhone' on the Apple Watch of fallback to iCloud, when the bluetooth connection is interrupted?

  It would be ideal if applications of "Find my iPhone" Apple Watch can be redirected via iCloud when the watch is connected to wifi, but the bluetooth with the phone connection is lost.

  Ongoing enforcement watch OS 2.1, coupled with the iPhone 6 more (iOS 9.2). Thank you!

  Hello

  The feature you described is not currently available on Apple Watch.

  It is a community of support based on the user, but if you want to suggest that Apple considers adding that as a new feature, you can do so here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

• When shooting video, it is necessary to turn off Steadyshot when the camera is on a tripod?

  When shooting video with a NEX - 5n, 6 or 7 on a tripod, it is necessary to disable the Steadyshot in the menu, or is the camera supposed to sense that she is on a tripod (like the small Sony Hv9x)? I ask because sometimes my video tripod with these cameras mounted seems to have a slight pulsation or flutter, I can't explain.

  The SteadyShot function does not serve a purpose, while the camera is mounted on a tripod. Given that the tripod is stationary when you take a picture, there is no excessive movement to the camera. It is not necessary to use the SteadyShot function in this situation.

  Sometimes involuntary blur can occur when you use SteadyShot, while the camera is on a tripod.

  If my post answered your question, please mark it as an "accepted Solution".

• Access to the camera connects but no Movie Uploader

  I have a Canon HF R42 camcorder with the latest firmware installed.  I used Pixela Camera access more to control the R42 and my cradle of pan CT - V1.

  To do this I have selected remote control + Streaming then monitor at home and connected successfully with the SSID and password.

  My problem is that the Uploader of movie of Pixela does not see the camera.

  I tried to connect as the access to the camera is running, and I also tried after my iPad v2 cyclical supply and connecting with the WiFi connection provided by the camcorder.

  What I am doing wrong?

  Thank you in advance for your help!

  Brian

  Found the answer to my question, and I want that it has documented a little better.

  Film-Uploader works great – once you change the status of the camcorder to the "file" to "playback".

  I'll admit it makes sense this way, but I want an intro 1-screen which could be disabled by Uploader of movie that pointed out it wasn't there.  Well!

• Computer crashes when the internet connection is detected

  Hello

  Need help with my dads pc, it is running Windows XP SP2 with IE7, the computer crashes as soon as an internet connection is detected, I have to remove the usb adapter WiFi to regain control of his PC, we use a model Linksy Cisco Modem ADSL2 + Daul-Band Wireless - N WAG320N, which is used for a certain number of laptops xbox and ps3 with no problems whatsoever.

  The system works very well without any problem until what the internet is detected and you must reset the computer of the tower base, we have tried a number of different usb adapters and a pci card but have the same result, a computer from freezing. I tried a number of different articles of this site, but all have failed, so it's my call for help to get my dads pc back on the internet, if I could get answers to the English plan as im not as good as I used to work on these systems.

  Help, please

  Kind regards

  Phil

  Hi Phil,

  1 have you made changes to your computer recently?

  2. you receive an error message when you try to connect to the Internet?

  3. what happens when you try to connect to the Internet by cable?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode with network.

  To use a safe mode with network option, follow these steps:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) use the arrow keys to choose Safe mode with networking in the Windows Advanced Options menu appears, and press ENTER.

  Step 2: PEd a clean boot and then check to see if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state

  to start your computer normally.

  Method 2: Update the network adapter and check if it helps.

  Updated a hardware driver that is not working properly

  Note: This link is applicable for Windows XP.