VAPP hardware platforms

Similar Questions

• C210 M2 hangs at "hardware platform, configuration and test".

  Hello

  We did a MMIC and update the BIOS on one of our servers to the latest version. System tells us that everything went well and the logging in the BIOS also worked well.

  The confusing thing is, even if the BIOS itself showed the correct version, the Webgui interface shows the old one.

  After leaving the BIOS screen and restarting the server twice for the installation of the OS, it now crashes after "memory test" to the 'config '. and test. step of the hardware platform.

  Even trying to perform a recovery of the BIOS translates into find resumed his success after a few seconds and then (scope of the BIOS / show details in CLI changes status of recovery of the BIOS called "None") stops.

  We´ve deleted each addtl. material such as PCI-card expansion and key USB system, cannot find error messages or stuff like that, we have simply wants this configuration and test step.

  has anyone seen similar behavior or idea how to move forward here?

  Rgds.

  Markus

  Hi Markus,.

  Try resetting the CMOS (see link below) configuration

  With the help of the J1E6 of the rider Clear CMOS (Page 36)

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C210M1/install/C210M1.PDF

• the error message "Windows Easy Transfer for Windows 7 is for a different hardware platform"

  When I try to install Windows Easy Transfer for Windows 7 to receive files from my old computer running XP32 error message appears "Windows Easy Transfer for Windows 7 is for a different hardware platform"

  What version of Windows 7 you are running 32-bit or 64-bit?

  You try to install the correct version of Easy Transfer?

  There is a 32-bit version and a 64-bit version.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

• Where can I get a copy of Firefox 17.0.11 to support the "security.ssl3.rsa_rc4_40_md5" on the old hardware platforms?

  IBM has some old equipment requiring safety requirements listed. Without it I can't to hardware maintenance. I need to 17.0.10 or 17.0.11 for Linux. Thank you.

  Download Firefox 17.0.11

  • https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/17.0.11esr/

  Download firefox versions

  • https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/

• PIX 6.3 available on hardware platforms

  Guys,

  Without doubt, you been asked this a million times more. Did a search but could not get to anything.

  Are the characteristics described in the PIX 6.3 software guide the same on all platforms (from PIX501 Daddy of big PIX535 baby!)?

  If it differs, can someone direct me to a document that explains, what is, or is not included in the smaller platforms compared to the largest platforms?

  See you soon

  Vito

  Vito,

  It's one of the beauties of the PIX. All 535 to 501 platforms perform the same images. There are some minor limitations on the 501 and 506 with respect to some of the features of IPSec (no manual button, for example), but for the most part, everything you can do on the 535, you can also do on the 501 and 506. There are certain physical limitations regarding connections, via IPSec tunnels, etc... on these devices, but no doubt obvious. I hope this helps.

  Scott

• Tecra S3: hardware upgrade - CPU, RAM, HARD drive

  Hello

  I just got a laptop from my company and it's 2 a bit slow for what I do, so please advise me on a hardware upgrade or point me in the right direction to ask this question.

  My Tecra is S3 model PTS30E - 01P01CG3 Y5120397H series, it is about three years old and I would like to upgrade:

  1 - CPU Intel Pentium M1.86 gHz, I can replace it with a dual core or core 2 duo of?
  The motherboard does it take? What is the most powerful CPU it can use?

  2-ram memory is 1 GB and I want to place as much as possible. 2 GB is the best that I can place?
  Can you recommend a brand of RAM which would give exceptional results?

  3-disk HARD 80 GB comes, and I also want to know if I can replace it with a bigger?
  Than do options GB 120 GB, 160 GB, I have more? These HDD fit as the size in my laptop?

  4-If you have any other recommendation of dope performance, please let me know.

  I live in Romania, I'm not sure where can I make these upgrades. What is the nearest place?

  Thank you and have a nice day.
  Florin.

  Hello Florin

  Tecra S3 is old enough laptop model, and expect too much with upgrades, especially with the CPU. Of way General CPU cannot be upgraded and perhaps should not be upgraded. Each laptop model has a specific design and cooling modules are optimized for the specific hardware platform.

  1. so, for you it is important to have the laptop stable without damaging the hardware. Okay, just for the record
  Tecra S3 comes with separate Intel Mobile Pentium-M processors - [1.73GHz/1.86GHz/2.0AGHz (0.748-1.356V)/2.13GHz (0, 748 - 1.372V))]
  [/ 2.26 GHz (0, 748 - 1.404V)] and these processors operate at 533 MHz bus clock.
  Update CPU not is also not supported if forget it. The CPU you have inside is powerful enough. What you need is more RAM and perfectly configured and optimized operating system.

  2 RAM can be upgraded up to 2 GB and it is not the problem. You can use 2 x 1 GB RAM DDR2-400/533 1 GB (PA3411U-1M1G).
  This RAM is tested and works perfectly with your Tecra S3 of will be.

  3 disk HARD upgrade is also not problematic. Tecra S3 uses SATA HDD and you can improve it with more than 120 GB. I'm 100% sure that you can use 160 GB with no problems.
  In my opinion, that's good enough. Isn t it? ;)

  4. optimize the operating system. Disable all unnecessary background processes and your Tecra will be working perfectly.

  >.. .i don't know where I can make these upgrades.
  Do it alone. It is not so complicated. If you need help let us know.
  Good bye

• Minimum hardware requirements for the scenario of VPDN (LAKE & LNS)

  Hello

  I need assistance with selection of the hardware platform for the scenario of vpdn. This deployment will serve up to 20 users Max can you tell me which is the minimum routing platform and version of IOS to use to the LAKE? And for LNS?

  Thank you.

  Best regards.

  28xx and 29erxx do not need DRY license, 880 can handle it too, but I don't know if the ordinary license is ok.

  Michael

  Please note all useful posts

• Is the 2950 a 64-bit platform?

  I want to acquire the new SBS2008 when it will be available, but I am not sure that my PE2950 is a qualified hardware platform, since 2008 requires 64-bit hardware, if I read on it correctly 100%. How could one know if their hardware is 64-bit? Are all 2950 s 64-bit?

  Thank you

  Laner

  
  

• Windows license when you copy a disk image to new hardware?

  Hello

  I work for a company that built machines with which we include a Windows 7 PC that is also running MS Office 2010 Professional.  I have create this PC and install / configure Windows, Office, and some 3rd party software.  It is a very time consuming process.

  This PC is absolutely crucial to the functioning of our machines, I want to provide an identically configured spare PC (PC2), which can serve as a backup in case the original PC (PC1) breaks down.  The easiest way for me to do is to copy an image of the disk from PC1 to PC2.

  I gave it a try and it seems to have worked, but when I started to PC2, Windows 7 and Office 2010 appeared as inactivated.  Windows 7 gives me the opportunity to change my product key and activate.  I can do that because I buy a second copy of Windows 7.  It was not as easy to find, but it seems that Office 2010 also gives me the opportunity to enter a new product key (in Control Panel |) Programs | Programs and features, select "Microsoft Office 2010 Professional 2010"by clicking on 'Edit' and finally by selecting 'enter a product key")." "  I can do that as well, because I buy a second copy of Microsoft Office.

  The problem I have is that I'll almost certainly want to try this procedure several times.  I bought two licenses Windows and two licenses of office, but I'm afraid of 'using' all of the activations allowed on these licenses.

  For example, today I did the disk from PC1 imaging procedure to PC2 for the first time.  I want to activate Windows and Office on PC2 and test completely PC2 with our machine before putting in backup storage.

  After having done that, I will continue to make changes to configuration on PC1 as I fine tune my software / settings before you send us the machine.  Before shipping, I want to start the disk from PC1 to PC2 imaging procedure.  Right now, I try to activate the same windows / Office of the licenses for the second time.  I'll be able to do it again?

  After we ship our machine and it is installed to our customer, I continue to refine my software to meet the needs of my clients when they evolve or that we realize things that we can do better.  Any time I do a significant change, I want really to redo the disc imaging procedure and to authorize and to test all software.

  It seems to me I'm coming soon a limit where Microsoft is no longer allow me to activate Windows 7 and Office.

  I was wondering if anyone has any suggestions that could make this task easier for me, without forces me to keep buying new licenses over and over again for the same two PC.

  Thanks in advance,
  Paul

  There are important to keep in mind. If the license you are delivered with one or both of these PC then under the terms of the license agreement, they are not transferable to another PC.

  However, if they are full product licenses purchased boxed separately from the computer in question (and not an OEM pack) then provided they are removed from the original material, then the license can be applied again to a new PC.

  The activation process will be reset if the image has been transferred to a different hardware platform and will happen every time. Automatic same reactivation work at least once, but if it happens too often so you will be asked to call the Activation Center. The fact is that you can only have a license to PC is that you have licenses for.

  The EULA does not take specific account for the same license be installed on a "live" system and a sleep not in use.

• Recommended to vSphere5 platform?

  Hello world

  Someone at - it recommendations on what type of affordable hardware platform that I can buy to run vSphere5 on (perferably a laptop)?   In summary, I would like to install VMware Workstation that I can use to configure and to simulate an environment vSphere integer 5 (two or three servers ESX, VC with a storage appliance, vMotion, DRS ect... SAN environment)?   With that, I would like to start studying for my review of VCP5.

  I recently bought a Dell Precision 690 who according to the vSphere 5 HCL has a chipset 64-bit capable.   When I installed ESX5 on it with an OS 64-bit to House VC (in VMware workstation) I received the error "VT-x/EPT is disabled for this ESX VM.  "You will be able to run 32-bit nested VM".    Before ask you, Yes, VT is enabled in the BIOS.  Apparently, this problem occurs on old platforms to host 64-bit with VT

  Thanks in advance,

  Jason

  A domain controller is not strictly necessary for vSphere (vCenter Server can also work in the Working Group), so you can save a VM

• In view of the first Pro CS4-Will my hardware to run all the features?

  I have a HP Pavilion d4990y, Quad Core Q6600, 2.4 ghz, 4 GB RAM, Geforce 8500 with 512 MB, 32 bit, running Vista Premium of Hm.  I have a system drive of 500 GB Sata 3.0 and a Seagate 750 GB SATA 3.0 dedicated video player.  I have no RAID configuration in place.  I have read the requirements for PP CS4, but they don't deal with the quad-core systems, and I'm afraid I'm not able to access or run all the PP CS4 features, especially in regards to the HD and AVCHD correctly.  I have recently retired and I'm ready to take on the learning curve of PP, since I now have the time.  I have a lot of experience with standard video editing - but who was only with Pinnacle Studio products. This possible approach, then, would be a big one for me, and I want to make sure I'm moving to a package that does not require to change my hardware platform.

  I would appreciate your comments and suggestions on this forum.

  There is no performance difference between SATA and eSATA. Both are just as good, so there is no need to install an internal hard drive.

• Difference between Satellite R50-B-114 and R50-B-119

  I would like to ask if there is a specific difference between these two?
  I don't think there is, but I'm curious, because I found two models with exactly the same settings (cpu, ram, hard drive, graphics, sound).
  And the price was different, 119 was about $ 100 cheaper.

  I found my guy already, however there are still 2 days until I can place my order (weekend). The only difference that I found at toshiba.eu is a hard drive size. My local dealer has them both with SSD of 256 and it was my choice. Does still count as the model even if a hard drive is changed?

  I haven't found a difference between the two models:
  R50-B-114 - 1 TB (5400 RPM) SATA
  R50-B-119 - 500 GB (7200 RPM) SATA

  Of course, it is the same model. The hardware platform is identical and has nothing to do with the SSD or HARD disk. Of course the SSD is much better choice. Machine with SSD inside can provide better performance of the laptop.

• Tecra M9 and compitable motherboards

  Good day to all
  My Toshiba laptop Tecra M9 PTM91E - 12R features of a faulty video card.
  I replaced this card many times, but it's always get bad after a while.
  My repair shop of my recommended to replace its motherboard in order to get a solution permanent.

  I'm not sure if I am looking for motherboards Compitable with my product

  Can someone tell me please with PART NUMBERS of SPECIFICATIONS AND motherboards that I can buy?

  Thanks in advance for your support

  > Any can advise me please with PART NUMBERS, specifications AND motherboards that I can buy?
  Hmmmm... It is not as easy as you think. Defective parts will be exchanged on mobile units with only identical hardware components. It's a completely different situation than on desktop systems.

  You can visit the nearest Toshiba service provider and ask for help, but you will see that they will not be able to help you.
  Fact is that Tecra M9 was offered with two hardware platforms. PTM90E and your PTM91E.

  In the end, I must say it's really strange that you have an ongoing problem with GPU defective. When everything is changed on professional way and you take care of the machine and don't forget laptop is cooled properly I don t see the reason why it should be defective over and over again.

  For 3 years I have Tecra A11 and use almost every day for my small business and there is no problem at all. OK I use for typical every day activities such as web or MS Office and not for games or other graphics intensive applications.

  Try to contact Toshiba service provider in your country and ask for advice. They should have access to the material database of Toshiba and maybe they have good advice for you.

  If possible, send feedback.

• Upgrading RAM on Satellite C855-10Z to run better games

  So, I enjoy playing games, but with only 4 GB of Ram and a card Intel(r) HD Graphics 3000... it becomes difficult.

  The maximum amount of RAM my computer can hold is 8 GB. My understanding is that the graphics card I have only has 64 MB of video memory dedicated and then seeps out of the norm of the RAM, so increase the RAM would make the video card better, right?

  I'm quite lost on if it works or not, pay £60 for the 8 GB of ram for the video card to just not be able to manage all the games is not worth, so I'd appreciate any help. :)

  At first, I must say that your machine is not the best game machine with the best hardware platform (GPU). In my opinion your Satellite C is typical machine of mid range designed for everyday activities.

  You're right about the use of the RAM. With more RAM the GPU will be use more memory for video, but you shouldn't expect a few superior graphics performance after upgrade of RAM.

  As you have already written your machine can handle with 8 GB of RAM. At the present time, that he should have a good memory on the inside, so I guess that the second memory slot is empty.
  Remove the cover and you will see what it looks like as a memory inside. You can add the second 4 GB of RAM, but please use the same memory module with PA3918U-1M4G part number.

• Satellite L750D-15E AMD Display driver

  Hey :)

  I have laptop Satellite L750D-15F (a6 - 3400 m AMD APU with Radeon HD 6520 G image) with win7 64 bit.

  The last update for the display driver AMD for my computer is 2012:
  http://www.Toshiba.co.il/innovation/JSP/supportMyProduct.do?LNG=29&service=IL#tab3;
  There are many more updates of drivers and there are many new video games that require the updated drivers.
  Is there a way to get more updated drivers?
  When I try to use auto driver AMD detect (when you try to download the driver that was detected), it shows me an error that the version of my graphics card is not supported.
  I've also updated the bios to version 2.10 to see if maybe that solved the problem but it didn't.
  is my video BIOS Date 10/05/11.

  Help, please
  Lee.

  Hello

  Display driver for mobile units is quite limited and the laptop manufacturers do not offer the updates very often. Problem is that the performance of equipment, performance of the graphics card in particular, must be controlled and it is controlled by the display driver.
  With the new graphics driver will offer more performance, but with more performance GPU will produce much more heat and it can be very dangerous for mobile machines of al.

  Cooling system for notebook computers is optimized for certain hardware platform, and if the material can be cooled correctly the result may be overheating or hardware damage. Which is the reason why you can not install these non support drivers. Toshiba will not be responsible if you use a third driver of the part and later come to the service with damaged graphics card.

  I know it's a bit boring and all of us want to have the right machine to high performance, but that's the problem with laptops in general.

  To be honest, these L models with AMD platform are portable vouchers but not a few machines games so I don't think you can do much.

  Update the BIOS of course has nothing to do with all this.