Error in stand-alone mode

Similar Questions

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• Flexconnect AP stuck in stand-alone Mode

  Hi all

  I have all my APs configured under flexconnect at the remote site.

  I have one controller at the head office.

  There are two redundant links of MPLS from the main office to the remote site.

  Now the question is, whenever my MPLS does a failover to the redundant link, all my flexconnect that aps disappear from the controller.

  I understand that this is due to the clock pulse is expired and the AP in stand-alone mode .

  But the APs flexconnect take a terribly long time to spend in connected mode, once flipping over MPLS (which is usually half a minute max).

  Infact he takes so long that I have to manually close/reset switch-ports (POE) on which all the access points on the remote site are connected!

  There are some adjustments that I'm missing here? or do I have I'll upgrade my firmware? By the way, my controller is currently on S/W ver: 7.4.121.0.

  If you have a test controller, you can test it with a different code of the WLC software. Otherwise reach TAC Cisco and see known issues with this code on it.

  HTH

  Rasika

• Limitation period for H-HARVEST stand-alone mode

  Hello

  We have a customer who is to evaluate a Motorla vs Cisco wireless solution. He said that a Motorola AP can operate in stand-alone mode for 48 hours. He lost after communication to the controller. Is there a limitation like this with a 2500 controller and the solution of access points 1140 series?.

  Y at - it any reference to show?

  Concerning

  Luis Noriega

  Not that I know... but here is a link to the limitation of the h-reap/FlexConnect:

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1241304

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1229985

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• Try to get the listener to the APEX to run in stand-alone mode

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
  
  Thank you!
  
  Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
  NEWS: Check out: /home/oracle/apex_listener/apex.war
  See: ' java-jar apex.war - help' for a full range of configuration options
  INFO: Extraction to: / tmp/apex
  INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
  INFO: From Embedded Web container: / tmp/apex
  December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
  INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
  NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
  INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
  INFO: http://localhost:8070 / apex began.
  December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized
  at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
  at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
  at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
  at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
  at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
  at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
  at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
  at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)
  
  
  December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
  at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
  at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)

  Hello

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.

  Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
  It is in any case, he started on Linux, so...

  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized

  This is the relevant part of your stack trace. You must call http://: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time.

  -Udo

• Stand-alone mode - scalability

  Hello
  
  We have an environment where we organize the listener of the APEX in stand-alone mode (on linux). Currently, it works on dev environments and test.
  The question is how to dimensionnera the independent auditor once we expose this to hundreds of users in the production environment?
  
  I know that the cost of not using a J2EE server is the management and control, but how to dimensionnera the independent auditor from deployment to a Web server?
  
  Brgds
  Martin B. Nielsen

  The stand-alone mode is only for development purposes. It is not intended for production use. You will need to use a proper application for the production server.

• BlackBerry Smartphones stand-alone mode

  Is there a stand-alone for the BlackBerry 8330 mode so I can listen to music or play video games while plane?  It allows the unit to be on, but calls or e-mails aren't coming through.

  Welcome to the forums.

  Yes, you can simply turn off the wireless.  Click on icon to manage the connections, then click on disable all connections.

  When you land, go back and click on enable all connections on.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• VAPP start not allowed in stand-alone mode

  Hello

  I encountered a problem while trying to create a paralytic by vCloud web gui. He created in fact very well, but at the start it says "Mode is not supported on a stand-alone host." What it means? How can I solve this problem?

  Thanks in advance

  fejese

  You have 2 + ESX(I) hosts and DRS is enabled on all hosts?

• Please help us to solve the problem in the subject MXE3500 RN with stand-alone mode

  Dear all

  My command team MXE3500 with node resource. 5, in fact, we would use as standalone, but I can't access http://x.x.x.x/mxeui.

  Is the node of resource able to run on the standalone device? or use the resource instread Manager

  Best regards

  Boonpot

  Node resource must be associated with a resource manager.  Only resource managers can be stand-alone.

• Security admin in stand-alone mode, Essbase 11.1.2.2 user

  Hello gurus,

  Can someone shed some light on how the security is stored for the admin user if Essbase is configured/deployed in standalone mode?

  We have configured Essbase in standalone mode, but in the face of the question while connecting to essbase MaxL.

  We tried with admin/password, but - Error Invalid credentials.   (Is there a different default password for the admin user?)

  So it was just curious to know how/where is check Essbase/MaxL to validate the credentials.

  TIA,

  Santy.

  affecting the admin user in the EssbaseConfiginfo.properties, then by removing all the .sec and dry backup, start essbase, can identify you with the new admin user and password.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Build error of stand-alone, with LV.7.01 application

  Hi all...

  I always get this pop up error (see attached photo) trying to build a single application. I got the full version of Labview 7.01 and Application generator also. the runtime engine also is 7.01.

  Concerning

  HFZ.

  ****

  Hi HFZ,.

  "I receive communication problems."

  Maybe you should solve these problems first of all in the development environment before you try to build an exe file?

  And from your description we can only guess that day...

  You must answer questions such as:

  -What type of communication?

  -What kind of communication problems?

  -All the missing drivers?

  - ...

• Error code stand-alone Installer

  Recently installed Windows 7 Proffesional as a clean install, Windows update has failed then ran Installer standalone and got the 0x802400e error code.

  Having a 64 bit version of Windows 7 and PC has less than 12 months.

  Have not been able to find an answer to what this error code means so that can try to solve the problem.

  is not prepared to tinker around in the registry files unless you have really too

  Windows 7 update problems? First read this.

  :)

• Cannot deploy the listener. Nor to stand alone, or with glass fish

  Hi guys,.
  
  I use the latest versions of:
  Apex 4.1
  Oracle 11g xe
  apex_listener.1.1.3.243.11.40
  GlassFish - 3.1.1
  Windows 7-64
  
  I tried to deploy APEX yesterday.
  To fish from glass: I followed exactly the steps mentioned in the documentation. but I get this error:
  

  State HTTP 503 - requested url http://192.168.1.33:8080 / apex / is currently unavailable.
  type of status report
  URL messageRequested http://192.168.1.33:8080 / apex / is currently unavailable.
  DescriptionThe requested service (requested url http://192.168.1.33:8080/apex/ is currently not available.) is not currently available.
  GlassFish Server Open Source Edition 3.1.1

  yesterday I managed to deploy with stand-alone mode and created a service for her, but the service does not start
  
  I got this error

  windows failed to start the service apex10 on the Local computer.
  The service has returned an error. This could be an internal Windows error or an error internal servcie

  . So, I was forced to keep the open CMD. Someone reboot the server. I tried to redeploy again, but I get "internal error." And here you can find put it:
  

  C:\Users\FAM_SERVER>cd C:\Program Files (x86)\Java\jre6\bin\
  
  C:\Program Files (x86)\Java\jre6\bin>java -Dapex.port=2586 -Dapex.home=D:\apex_l
  istener -Dapex.images=C:\apex\images -jar D:\apex_listener\apex.war
  INFO: Starting: D:\apex_listener\apex.war
   See: 'java -jar apex.war --help' for full range of configuration options
  INFO: Extracting to: D:\apex_listener
  INFO: Using classpath: file:/D:/apex_listener/apex/____embedded/start.jar:file:/
  D:/apex_listener/apex/WEB-INF/lib/apex.jar:file:/D:/apex_listener/apex/WEB-INF/l
  ib/commons-fileupload-1.2.1.jar:file:/D:/apex_listener/apex/WEB-INF/lib/je-4.0.1
  03.jar:file:/D:/apex_listener/apex/WEB-INF/lib/ojdbc6.jar:file:/D:/apex_listener
  /apex/WEB-INF/lib/ojmisc.jar:file:/D:/apex_listener/apex/WEB-INF/lib/poi-3.6-200
  91214.jar:file:/D:/apex_listener/apex/WEB-INF/lib/ucp.jar:file:/D:/apex_listener
  /apex/WEB-INF/lib/xdb-11.2.0.jar:file:/D:/apex_listener/apex/WEB-INF/lib/xmlpars
  erv2-11.2.0.jar:
  INFO: Starting Embedded Web Container in: D:\apex_listener
  Enter a username for the APEX Listener Administrator [adminlistener]: admin
  Enter a password for admin:
  Confirm password for admin:
  Enter a username for the APEX Listener Manager [managerlistener]: manager
  Enter a password for manager:
  Confirm password for manager:
  Nov 17, 2011 9:22:16 AM ____bootstrap.Deployer deploy
  INFO: Will deploy application path=D:\apex_listener\apex\WEB-INF\web.xml
  Nov 17, 2011 9:22:17 AM ____bootstrap.Deployer deploy
  INFO: deployed application path=D:\apex_listener\apex\WEB-INF\web.xml
  Nov 17, 2011 9:22:17 AM com.sun.grizzly.Controller logVersion
  INFO: Starting Grizzly Framework 1.9.18-o - Thu Nov 17 09:22:17 GST 2011
  INFO: Please complete configuration at: http://localhost:2586/apex/listenerConfi
  gure
  Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  java.lang.IllegalStateException: Not yet initialised
          at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:
  249)
          at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
          at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
          at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(Admin
  Manager.java:868)
          at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java
  :841)
          at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
          at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
          at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
  .java:195)
          at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
  ChainImpl.java:139)
          at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
  java:376)
          at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
  a:72)
          at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
  va:324)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
  Chain.java:180)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
  91)
          at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
          at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
          at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
  ter.java:170)
          at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
  tocolChain.java:135)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:102)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:88)
          at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
  :76)
          at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
  ask.java:53)
          at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
  java:57)
          at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
  ool.java:330)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
  .java:309)
          at java.lang.Thread.run(Unknown Source)
  Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined
  
          at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
  va:91)
          at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
  74)
          at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
  85)
          at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
  ava:138)
          at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
  85)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
  .java:195)
          at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
  ChainImpl.java:139)
          at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
  java:376)
          at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
  a:72)
          at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
  va:324)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
  Chain.java:180)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
  91)
          at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
          at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
          at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
  ter.java:170)
          at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
  tocolChain.java:135)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:102)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:88)
          at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
  :76)
          at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
  ask.java:53)
          at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
  java:57)
          at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
  ool.java:330)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
  .java:309)
          at java.lang.Thread.run(Unknown Source)
  Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined
  
          at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
  va:91)
          at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
  74)
          at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
  85)
          at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
  ava:138)
          at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
  85)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
  .java:195)
          at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
  ChainImpl.java:139)
          at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
  java:376)
          at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
  a:72)
          at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
  va:324)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
  Chain.java:180)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
  91)
          at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
          at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
          at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
  ter.java:170)
          at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
  tocolChain.java:135)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:102)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:88)
          at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
  :76)
          at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
  ask.java:53)
          at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
  java:57)
          at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
  ool.java:330)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
  .java:309)
          at java.lang.Thread.run(Unknown Source)
  Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined
  
          at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
  va:91)
          at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
  74)
          at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
  85)
          at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
  ava:138)
          at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
  85)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
  .java:195)
          at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
  ChainImpl.java:139)
          at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
  java:376)
          at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
  a:72)
          at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
  va:324)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
  Chain.java:180)
          at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
  :166)
          at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
  91)
          at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
          at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
          at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
  ter.java:170)
          at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
  tocolChain.java:135)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:102)
          at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
  a:88)
          at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
  :76)
          at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
  ask.java:53)
          at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
  java:57)
          at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
  ool.java:330)
          at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
  .java:309)
          at java.lang.Thread.run(Unknown Source)

  Published by: Fateh November 16, 2011 21:42
  
  Published by: Fateh November 16, 2011 21:46

  Hi Fateh,

  If I do not Dapex.home in the 'startup script", so that this file exists?

  It will be in the directory temp of your users. The actual location of that APEX listener uses belongs to the output of the console at startup.
  But I recommend always using the apex.home parameter, then you can be sure where the APEX listener looking for him and that it is not deleted by some 'clean-up '.

  Yet, when I create a service for the 'start-up' file, I get the same error:

  What account name is the service that is supposed to work? If you do not apex.home , the temp directory will usually be different if you do not use your username. Therefore, you will need a Setup for the account that runs the service.

  So, I need to keep the open CMD...

  No, you could (and should) pipe the console output to a log file. See the full command line in the example I posted here: {message identifier: = 9606494}
  I think that this is the post you mentioned above...

  APEX earpiece not working only not with ORACLE XE (as I know, waiting for patch)
  so far I have faced a problem with Interactive reports do not work correctly with Glassfish

  There are two points to this inaccurate publication:
  1 there is a work around for this problem.
  2. the problem was resolved short after he acknowledged.

  There are many users using listener of the APEX with XE here in the forum. I have two bodies, including one with the new 11.2 XE and APEX 4.1, as in your scenario and it works very well.

  In general, I think that 4 apex is more stable than the Apex 4.1. Apex 4.1 I am disconnected for reason now... A few times, I click on the header of column in IR and takes time to load the values...

  Well, as far as I know, have evolved in the IRs, is not completely improbable that some of these changes could cause new problems. But I guess that you can find answers for this in the forum {forum: id = 137}.

  Do you have any suspicion regarding the glass fish? I deployed Apex listener by following the instructions in the documentation. Then click launch. Then it should start to use port 8080, but it did not work...!

  Hmmm... You see the page default GlassFish ("GlassFish Server - server running") when you callhttp://: 8080? Port number, it is not the APEX listeners case when you do not use offline...
  If you get a result of http://: 8080/apex you could look in the application log in you GlassFish for more information (like in the console in stand-alone mode).
  My first guess would be that you do not have confgured the APEX listener you still deployed. It should be noted that the GlassFish does not use the users temp temp directory, but has its own. So to call listenerConfigure after the first deployment or set up a config.dir with an existing apex - config.xml. I would recommend the latter strategy. You should read the article of the Guide of the Installation on the configuration file and how to set its location in the file web.xml or search the forum for this request (common)...

  -Udo

• Change IOS on AP 1131AG light to stand alone

  Hi experts,

  can anyone advice if the ap 1131ag IOS can be changed to stand alone? can you give me a link where I could get a standalone IOS and how? Thank you!

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 set the timeout on the TFTP server in 30 seconds.

  Step 4 on the PC where, the TFTP server perform the following steps:

  a. disable the firewall, such as Windows, ZoneAlarm firewall firewall software, McAffee firewall or other.

  b. ensure that all Windows are visible. In Windows Explorer, click Tools > Folder Options > view. Deselect hide them extensions of known file types check box.

  Step 5, rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point, c1130-k9w7 - tar.default for a series of 1130 access point, c1240-k9w7 - tar.default for a 1240 series access point and c1250-k9w7 - tar.default for a 1250 series access point.

  Step 6 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 7 disconnect the power to the access point.

  Step 8 push the MODE button and hold the button while you reconnect power to the access point.

  Step 9 hold the MODE button until the status LED turns red (approximately 20 to 30 seconds), then release.

  Step 10 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 11 after the access point reboots, reconfigure using the GUI or the CLI.