Variable severity scale

Similar Questions

• Vs level Variable of Variable severity rule.

  Hello

  I am trying to understand in what situations a Variable of severity level would be used rather than a State Variable. Can someone explain this, as far as I can tell from the documentation that the only practical difference is variable severity of level are only available in the condition as they are defined in.

  See you soon.

  Matt.

  Your interpretation is correct, as seen in the documentation , these variables have different fields of application.

  Rule variables can be referenced in any level of gravity but the level of variable gravity can only be referenced in the expression associated with the level of severity in which are defined variables.

  Keep in mind that we have the variable of register global and available to all objects and types of topology.

  Golan

• How to set the property node maximum xscale for several scale XY Chart

  Hello

  I use a graph XY with three X axis and three scales of axis Y to draw the three sets of data. This works well.

  What I do now is to set the Xscale.Maximum property node for one of the x-axis (the other two autoscale). If I click right in the (Create Blockdiagram; Node property; X scale; Maximum) I can not choose what x-axis I want to put the Maximum for.

  So my question: how to select a specific axis allows you to set the XScale.Maximum property node when having several axes?

  Thank you for your help, any suggestions are appreciated!

  Hello

  After some more research and experimentation, I found that using the scale property X Active I can determine/set for which the XScale.Maximum Xscale is used.

  This solved my problem.

  I hope someone else can save themselves a few hours with this thread!

  Thank you

• Thread Safe variables - several symbol at link definitions

  I'm going through the tutorial "Multithreading in LabWindows/CVI.

  The following line is in the tutorial about the variables in Thread-Safe:

  "If you need to access the variable in thread-safe from more than one file source, use the macro DeclareThreadSafeScalarVar or DeclareThreadSafeArrayVar in an include (.h) file for create statements for the accessor functions."

  OK works with a source file, but when I include the header file in a second file from the source, I have "Several definitions for symbol" errors when link for all functions of accessor in the two source files.

  It's probably something simple, but after a few hours I'm at a loss. Any ideas are appreciated.

  Scott T

  You should have DefineThreadSafeXXX in exactly a source file and a DeclareThreadSafeXXX in any number of source files (or in a file header included in the source files). The following works for me in 2012 of the CVI:

  / * temp.h * /.

  #include

  DeclareThreadSafeScalarVar (double, Num);

  void test (void);

  * Temp.c * /.

  #include "temp.h".

  DefineThreadSafeScalarVar (double, Num,-1);

  void main (void) {}

  InitializeNum();

  test();

  }

  / * temp2.c * /.

  #include "temp.h".

  void test (void) {}

  SetNum (1.0);

  }

• several scales on Y with the time axis

  Hello. I'm new to the tiara. My first impression is that it's interesting.

  I have a few questions about the number of scales.

  So, how many scales on axis Y can Diadem support? Of course, a time axis.

  I mean, I have an excel (text) file with 6 columns, one for the time. Is it possible to have a graph with 5 scales, each scale for a signal (column)?

  The limit of the scale for Excel is 2 (two).

  Thank you.

  Hello dsasorin,

  I went ahead and made an example with 10 spindles on axis x, same color coded the axis labels. Brad was already properly mentioned that 20 is the limit, but as you can see, 10 already uses a lot of space for the axes vs real graphics, although these a little more tight, I guess I could have done.

  

  Not the prettiest report ever, but it should get the message. It took me less than 5 minutes to create this example once I decided what data to use. If you are a model, it will take less than 2 seconds to create this for multiple data sets which have a similar data structure...

  Let us know if you have any additional questions,

  Otmar

• Aligning a zero position on a graph with several scales & Auto scale

  Hello!

  I hope it's a quick - but google searches and browse the forums nothing have mounted.

  I have a graph with two scales - a position and a speed (which can obviously differ from each other). I want to be able to do is to have the scale auto chart/scales - but for the 0 position to stay in the center of the chart. With 0 balance point to different places, this is the graph that is very difficult to understand at a quick glance.

  If you see the attached screenshot - the positions of two 0 are in different places.

  Is it possible to have the scale automatically, but for zero to stay in the center of the graph for the two scales?

  Many thanks in advance,

  Sam

  (As I know) you can't do this with auto scale.

  Disable the autoscale, and then manually set the interval to be symmetric compared to zero for each scale.

  Find the maximum of the absolute value of each table of marks.  Then put it away on + and - of this value.  (in the example below, I did a loose fit by multiplying by 1.1).  Since you have more than one scale of the axis, you need to browse to treat each of them at a time.  First of all, he must be told what balance Y you want to adjust, then, set the values.

  

  Another option would be to have align the zeros, but not that the scale is symmetrical around them.  You can do that too, it takes just a little more math.  I would like to know if that's what you want.

• Using a matrix with variables in it.

  Hi all, I'm new on my HP 50 g so it can be easier that I am make it look like.

  I'm writing an equation for my strength of class material. The equation is the following:

  K = ((E*A)/L) * [C ^ C * S 2 - C ^ 2 - C * S]
  [C * S S ^ 2 - C * S S ^ 2]

  [- C ^ 2 - C * S C ^ C * S 2]

  [-C * S S ^ C * S 2 S ^ 2]

  The matrix is a 4 x 4. I need to be able to assign values to E, A, L and the largest C & S. So basically, I just need a scalar multiplied by a matrix. I can't find a way to make it work.

  Anyone would be able to help out me?

  I use RPN and CAS mode only has verified digital mode. I am really new to the HP 50 g but I can pass anything as longa s we can make this work!
  
  Thank you!

  If you want to multiply many different measurers to the matrix,

  or replace it with many different values of S, C, E, A, L, the best way is the following

  store the original matrix (again, in this example, only using 2 lines of the matrix)

  [[' C ^ 2 ' * IT '-C ^ 2' '-(S*C)']]
  [[THE OF * c ^ 2' '-(S*C)' '-(S^2)']]

  "MAT".

  STO

  the matrix is now stored in a variable called MAST

  now store the meter

  ' E * A/L '.

  "SCAL".

  STO

  the meter is stored in a variable called SCAL

  now for the original equation

  "SCAL * MAST '"

  « K »

  STO

  now for the first group of variables

  5

  « E »

  STO

  6

  « A »

  STO

  7

  « L »

  STO

  8

  THE OF '

  STO

  9

  « C »

  STO

  all variables have now assigned values

  Press the VAR

  to make sure that the variables are showing on the keys F1 to F6

  Press the key to display for K

  EVAL

  SIMPLIFY (or ENLARGE ENLARGE)

  

  and if you want the solutions of matrix in decimal form, press SHIFT RIGHT-> NUM (key)

  

  to change the values of variables, for example, 'L', it is very simple... a value of 20 L

  ENTER 20

  LEFT SHIFT

  L key (note that, to the left, then the selection key for the variable to be stored in the format works only in mode RPL NOT algebraic mode)

  now to reassess the matrix * equation Measurer

  K key

  EVAL

  SIMPLIFY (or ENLARGE ENLARGE)

  

  If you want to change the scaler, the same process.

  "L * E * A + 13'.

  LEFT SHIFT

  softkey SCAL

  K key

  EVAL

  SIMPLIFY (or ENLARGE ENLARGE)

  to change the matrix...

  softkey MAST

  DOWN (this automatically the matrix in the matrix writer application)

  Edit the required cells, and then press enter

  with the matrix now published on stack level 1

  LEFT SHIFT

  softkey MAST

  K key

  EVAL

  SIMPLIFY (or ENLARGE ENLARGE)

  etc...

• Chart with multiple scales of Y

  Hello

  As you can see in the excerpt, I'm trying to plot a graph with several scales of Y. What do you think is wrong with it to get the following error.

  

  Possible reasons:
  
  LabVIEW:  invalid property value.

  I wouldn't change nothing to indexing.  You already wrote this code.

  I clicked the balance you already had and clicked on "Double ladder" to create the second and third.  Once they have existed, the crux of your property has worked fine as it was.

• Plot scale association

  is it possible:

  I have a chart, there several scales there... many on the left side of the graph and many on the right, I show only 2 at a time, it is essentially a plot of scale are double with y-selectable scales... I do using nodes of property and it works fine.  I have drop down menus with plots different, and these plots will be display on the graph when selected... ok, here's my problem/question

  is it possible to associate a conspiracy with a scale more there?

  I need to associate patches with 2 ladders, one on the left and the other on the right side of my plots

  because it is basically a graph with 2 drop down menus, drop-down menus has groups of plots in it... each 2 drop down menus contains the same plots and each is associated with either the y - balance right side or left side y-scales... This makes it possible for various different combinations of field vs trace on the graph... but being able to associate a conspiracy with two parties limit myself

  for now, I can do

  plot1 vs plot2

  Plot3 vs plot4

  but can not do

  plot1 vs plot3... because I can't join plot3 y-scales on both sides of the graph

  I hope this makes sense.

  Thank you very much!

  I don't know exactly what you're asking, but all the following statements are true. They answer your question?

  1. A field must always be linked to a single scale
  2. Many parcels can be related to a scale
  3. A parcel cannot be bound to a scale more
  4. A conspiracy may be visible, while its scale is invisible
  5. A conspiracy can be invisible while its scale is visible
  6. You can still have additional scales that are not related to plots

• Multiple scales, sides of swap (LV8.5) problem

  A problem I know must be easily soluble and indeed I have graphics with several scales in a number of my applications with additional scale traded on the other side. Today, in the execution of the following command to create a second X - or y-axis of, 'swap sides' is always grayed out in the menu contextual right click.  I clicked everywhere near the ladder.  With the help of LabVIEW 8.5.  Any help is appreciated.

  Add X - and Y-scales multiple graphs or diagrams Dim hasPlayer, hasPlayer playerversion = false playerversion = 10 Do While playerversion > 0 On Error Resume Next hasPlayer = (IsObject (CreateObject ("ShockwaveFlash.ShockwaveFlash." & playerversion))) if hasPlayer = true then Exit Do playerversion = playerversion - 1 loop is_FlashVersion = is_Flash playerversion = hasPlayer

  Perform the following steps to add a scale to a waveform graph.

  1. Right click on the shape of wave or chart chart scale and select duplicate scaling in the context menu.
  2. To move the ladder across the screen, right-click the new scale and select Sides Swap in the context menu.

  

  
  

• Visual control of an analogue Signal, varying in time

  Hello

  Here is my configuration (Fig. 1), where X coil - block "simulate Signal", which emulates an analog value that varies in some way.

  This value is the result of a treatment on analog inputs... in this configuration the signal, I chose wave SIN just for simplicity.

  Is it possible to view the evolution of this signal in time... I mean that the "time window" on "Voltage" graph should move forward (Fig. 2).

  I tried to use XY graph rather applaying (Figure 1, bottom of th), the iteration count in the loop 'While' for 'Time '.

  but received an error message: "you have connected 2 terminals of different types.

  What could be a solution (of course if I want it is feasible)

  Thanks in advance

  Pavel

  Fig. 1

  

  Fig. 2

  

  Hi Pavel,

  you don't 'manage' the history of a graphics buffer, you pay at the time of publishing. At runtime, it is fixed!

  There is no difference between the periodic signals and not periodicals: you measure with a certain frequency of sampling and you decide Samper how useful are stored in the buffer. Point.

  When you want to have a variable buffer (or: variable x scale) you must buffer on your own and use a graphic instead. So we're back to your original question: context-sensitive help will show you the data types expected for graphics, when you hover over their terminals!

• scaling problems with the DAQ hardware help

  I am a new user and I'm trying to do a simple scaling of my entries of tension using the DAQ help. For example: a channel entered around 8V on a 0 to 10V input selection. I'm trying to resize it (linear) to show me around 28V using y = mx + b formula. My value of m is 3.2 and b 0. What DAQ Assistant bed is close to 16V instead of 25V (3.2 * 8). I custom make several scales, basically multiplying the entry of 2, 3, 4, 5, & but none exits causes what I expected according to the formula, and even the 5 x the value decrease. If I go to "not to scale", I read 8V, which is what actually happens in the 6255 map. Any thoughts?

  Hello DB66.

  Remember that the scope of the input Signal must be defined scale post. How do you set as your input signal range, you're reading may be scaling themselves within the reach of the input signal. A value of coefficient of 3.2, the stove must be Max = 32 Min =-32, since your device probably has a +/-10V range.

  Hope that helps.

• overlap of XY graph with xscale property

  Hello

  I have a problem using the xscale maximum and minimum property... when I use the nodes property that it straddles two sets of curves in the same graph: one with the scale I put and the other as if I haven´t the value of the xscale assets... What I've done wrong? I Don t have a picture of what I m to describe because I can´t manage to get a screenshot with the two graphs are overlapped... = S... I hope you can help me... What can I do to remove the graph that doesn´t have a scale...? Thanks for your replies...!

  ... Lara Mia...

  Looks like you have several plots.  Check the property pages of the graph and see if all the plots are set to use the scales that you change.  If you have several scales and you want to change all then them you can use the active scale field, the scale property.

• The button is avery another shot of button

  Hello. I have a project in CP7 with about 40 slides. Each slide has several buttons on it, and that one button is the correct path through the project. All the other buttons have error reporting by using advanced actions so that the learner is passed to a slide of the error, said that they are wrong, and they have the opportunity to return to the slide, they were just an and click on the appropriate button.

  This place and works very well in on slide 35. Slide 35, button crashes before moving on to the next slide. This button has an action in advance that is checkling the data for some variables (several buttons to have the same exact tip action, so I don't think it's the AA which is at the origin of the problem... but maybe...). As soon as the student clicks on the button, it takes about 15 seconds (the slide is only 3 seconds...) for Captivate to send them to the next slide.

  The even stranger thing is that EACH BUTTON AFTER this, whether they are correct or not, takes a lot of time to process as well. I thought it's maybe a browser problem, but it crashes on the same key every time. I'm not related to an LMS at all, this isn't a question.

  I already deleted the button and make a new one from scratch and I made a whole new action of tip (with the same functionality, of course) and who have used with the same results. I would do a test file with the features of the bare bones to test it, but the AA even with the exact same settings works on other slides in the project, so I don't think I could reproduce the question if I made a new file cptx with the feature to test.

  Someone out there knows where I should go or can suggest things to study?

  Indeed, I wonder if it is not due to the interaction of the radiobutton. I know that the first version of them, still called widget, were at the origin of the leaks memory. You have a large number of these interactions? And always for those first widgets, I found that duplicate the widget could cause weird problems as well. Now I am puzzled because you're talking about the 'Improved' radiobutton widget, where did you? What is a custom widget?

  Lilybiri

• creating a dynamic button class

  Hi all. I am creating a button class that has certain properties such as the scale which can be coded to run. The tutorial I found hard codes the amount of scaling in the class, but I would like to be able to create a new instance of the button class in Flash and say on the main timeline, set my variables for scale... and pass to the class file. I'm running in a "1120" error message I enclose the code of original work.
  
  Thank you.

  Add a setter or installers to your class.