vCenter registration error

Similar Questions

• program of streets & trips Microsoft will not work, keep getting registration error message how do I fix

  Microsoft streets & trips program will not work keep registration error message, how can I solve the problem?

  Hi, Long1950,

  See if that helps

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590

• HP Envy 4520: Registration error of the HP Envy 4520 with Google Cloud print

  I followed the instructions to use settings in chrome to save my HP Envy 4520 with Google print clouds.  I get to the point where I went to the printer to press OK, it will display"add printer, then after a while, I get this error message:

  Was able to complete registration

  An error has occurred. Please check your printer and try again

  The printer using the WiFi.

  Hi greenturtle

  Thanks for your reply, but I'm not using the Chromebook.  I followed the instructions by using the settings in the chrome browser.

  I found another way to activate Cloud Print, so I'm OK now.

• Registration error of the standard warranty - how to change

  Hello

  I have a standard warranty for my laptop that I bought in the 16th of this month. I went to the Web page of warranty: www.toshiba-europe.com/registration, but I made a mistake. Instead of saving it to the 'standard' guarantee, I registrate in "extended warranty"... and then I relizes my mistake when he refused to accept the agreement 'number', so I skiped the operation.

  I went back to register in the 'standard' warranty, and when I finished to fill in all the information, I + click + 'save' but then they said "this nootbok is already registered"... and the operation was not + * finished * +.

  So I ask how I can fix this "error"... and save my standard warranty... ???

  Please, if anyone can help me I would be VERY grateful for your responses...

  =)

  .

  I would call Toshiba and ask them to look into the issue. This looks like a bug with the website.

• Registration error of the keys through the plugin Eclipse

  I get the following error message when I try to record the keys through the Eclipse Plugin.

  «Registration failed because ID customer * is not be registered (i.e. the ID was not in the database of the authorization).»

  I am sure that my PIN is correct because it was included in the Bill I received by post for the purchase of my keys.

  Any help on this would be greatly appreciated.

  I could solve this problem by following the instructions described in the next post.

  http://supportforums.BlackBerry.com/T5/Java-development/signing-client-does-not-exist-in-authorizati...

• Registration error of wireless - Windows 7 profile

  When I go into the Network icon in the bar of tasks and then made a right click on the internet connection I'm on and then click on Properties I get an error saying "error saving profile Wireless - Windows has encountered an error of the wireless profile registration. Specific error: the system cannot find the specified file'.» I have looked at many other positions online and tried their solutions but none worked :/ someone at - it an idea how I would go around fixing this problem? any help would be appreciated. Thank you.

  Found the solution! turns out be a virus causing the problem! I looked through the process in the Task Manager and came across SafetyNutManager... I was wondering what it was and google it and found to be a virus (not a great good!). Deleted all the files to do with it and got the solution :)

• Premium Creative suite CS4: product registration error 6

  I was using CS4 for many years on my IMac, but after the last update el capitan, my computer did not work well.

  So I have postponed all my data (with the support of apple), installed the previous a Maverick. then I recovered my data with time Machine,

  but now I can't use at all my Creative suite CS4: I have a message 'error 6': 'product registration is not available... ". »

  When I delayed my datas, I forgot my software before uninstalling. How can I solve this problem?

  Is it not possible to call someone (adobe support...) in france?

  Thank you very much for your help!

  (and sorry for my bad English!)

  Tell everyone you know who is the owner of a Mac... Migration of Mac and Time Machine NOT FUNCTION correctly with the Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

  - and 5 steps in response to #1 https://forums.adobe.com/thread/2144928

• Add vCenter Workflow error: unexpected status code: 404

  Hello

  I am trying to add a vCenter vRO 7.0.1 host using the plugin existing VC (ver. 6.0.2.3435085) and I run a strange question.

  If I choose NO for the option ' will you orchestrate this instance "then the workflow completes successfully.  This does allow me to run workflows against the vCenter.

  When I remove the existing vCenter and re - run the workflow of vCenter Add, this time by choosing YES, the workflow fails with error validation process: unexpected status code: 404 (Workflow: Add a vCenter server instance / validate (item2) #1)

  Any ideas why check YES causes this?

  My entries:

  Host: fqdn.servername.com

  Port: 9443

  Path: /sdk

  Ignore the Cert: Yes

  Thank you.

  Hello

  This error probably means that the port number is incorrect.

  Are you sure 9443 is the correct port number? Usually, the port number is 443, not 9443 (port 9443 is where vSphere Web Client is available). Could you re-run the workflow with port 443?

• VCenter vmotion error cross

  I tested successfully a script powerCLI for cross vCenter vmotion with two vCenters on the same domain of SINGLE sign-on, but I'm unable to operate with two vCenter servers that are not on the same domain of SINGLE sign-on.  The error "a specified parameter is not correct: ServiceLocator.instanceUuid.

  The hosts and vCenter servers running version 6.0.  The source that VC is running on windows and the remote works the linux device.  The script starts the task successfully, but the task fails immediately.  What log files should I look for more information or a stack trace?

  The original source of the script was written by William Lam (thanks!)

  (param

  [parameter] $vm_name.

  [parameter] $source_cluster.

  [parameter] $source_vcenter.

  [parameter] $target_cluster.

  [parameter] $target_vcenter.

  [parameter] $target_storage_pod.

  [parameter] $pools_to_move.

  [parameter] $folder

  )

  $sc_test_thumb = "XX".

  $thumbprint = $sc_test_thumb

  $source_vc = to connect-viserver $source_vcenter

  $source_cl = get-cluster-server $source_vc-name $source_cluster

  $source_pool = get-resourcepool-Server $source_vc-name $pools_to_move

  $target_vc = to connect-viserver $target_vcenter

  $target_cl = get-cluster-server $target_vc-name $target_cluster

  $target_hosts = get-vmhost-Server $target_vc-location $target_cl

  $target_pool = get-resourcepool-Server $target_vc-location $target_cl-name $pools_to_move

  $target_datastores = get-data-server store $target_vc-location $target_storage_pod

  $vm = get-vm-Server $source_vc-name $vm_name-location $source_pool

  $destFolder = get-file-server $target_vc-name $folder

  $rspec = new-Object VMware.Vim.VirtualMachineRelocateSpec

  $rspec.folder = $destFolder.id

  $rspec.datastore =.extensiondata.moref $target_datastores [0]

  $rspec.host =.extensiondata.moref $target_hosts [0]

  $rspec.pool = $target_pool.extensiondata.moref

  # New Locator service required for vCenter Server Destination when do not part of the same domain SSO

  $service = new-Object VMware.Vim.ServiceLocator

  $credential = new-Object VMware.Vim.ServiceLocatorNamePassword

  $credential.username = (get-VICredentialStoreItem-host $target_vcenter) .user

  $credential.password = (get-VICredentialStoreItem-host $target_vcenter) .password

  $service.credential = $credential

  $service. InstanceUuid = $target_vc. InstanceUuid

  $service.sslThumbprint = $thumbprint

  $service.url = ("https://"+ $target_vcenter)

  $rspec.service = $service

  $rspec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] ($vm.networkadapters.count)

  $devices = $vm.extensiondata.Config.Hardware.Device

  $i = 0

  {foreach ($device to $devices)

  If ($device - is [VMware.Vim.VirtualEthernetCard]) {}

  $rspec.deviceChange [$i] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $rspec.deviceChange [$i]. Operation = "├editer."

  $rspec.deviceChange [$i]. Device = $device

  $nic = get-networkadapter - vm $vm - name $device. DeviceInfo.label

  $destPG = get-vdportgroup-Server $target_vc-name $nic.networkname

  $dvSwitchUuid = (get-View-Server $Id target_vc $destPG.extensiondata.Config.DistributedVirtualSwitch). Summary.Uuid

  $rspec.deviceChange [$i]. Device.Backing = New-Object VMware.Vim.VirtualEthernetCardDistributedVirtualPortBackingInfo

  $rspec.deviceChange [$i]. Device.Backing.Port = New-Object VMware.Vim.DistributedVirtualSwitchPortConnection

  $rspec.deviceChange [$i]. Device.Backing.Port.PortgroupKey = $destPG.key

  $rspec.deviceChange [$i]. Device.Backing.Port.SwitchUuid = $dvSwitchUuid

  $i ++

  }

  }

  Write-Host "' nMigrating $vm of $source_vc at $target_vc...". ' n »

  Question # Cross VC-vMotion

  $task = $vm.extensiondata.RelocateVM_Task ($rspec, "defaultPriority")

  Disconnect-VIServer $source_vc - force - confirm: $false

  Disconnect-VIServer $target_vc - force - confirm: $false

  return $task

  I found an error in the log vpxd.  The instanceUuid must be converted to upper case before he packed.

  Fixed this line:

  $service. InstanceUuid = $target_vc. InstanceUuid.toUpper)

  Thanks LucD!

• VCenter converter error "host key < ip > cannot be found."

  Hello friends, how are you?

  I'm trying to convert a physical machine with Redhat 3 have the latest version of VMware vCenter Converter (5.5.3)

  On the machine with Redhat, I have disabled firewall, IP address as name solves well and are in the same network as the host.

  At one point, after target partition and format the disk on the server, I get the following error in the log:

  FAILURE: A general system error occurred:

  Network error. 192.168.0.142 host key cannot be recovered. (code 2 back)

  Can someone help me?

  Thank you very much!

  Solved friends, was a mine very stupid mistake!

  He put a different vm to support mask of the subnet of the vCenter.

  Everything solved!

• vCenter Server: error 29102

  Hola a todos, estoy instalando vCenter in una Máquina virtual y me arroja el siguiente error:

  

  Tengo than tener wont vCenter Single Sign-On? If lo instalo no me toca nada of mi Active Directory? Porque vi some options del 'Site name' y UN number del dominio "vsphere.local." Quiero estar seguro that no me haga cambios in the mi dominio instalarlo antes infrastructure config.

  Saludos.

  Hola,

  If you have than instalarlo. In el propio Assistant tienes los clearly previos para cada parte of the instalacion del vCenter. Para instalar el vCenter antes tienes than tener wont como minimo el vCenter Single-Sign-On y el vCenter Inventory Service, sino los tienes obtienes pones el that error. SSO El none go you a touch el Active Directory, "simplemente" lo go a usar para autenticar users of dominio con los Sue al vCenter a traves del vSphere Client Access o del Web client vSphere. Dentro del SSO tienes than configurar UN identity Source aren't otra cosa that indicate UN dominio driver y unas credenciales validas en el Active Directory para that el SSO can see post of users. If esto no esta hecho o no podras works solo connect al vCenter con users local del propio Server vCenter. El dominio vsphere.local're a number FQDN el vCenter usa para sus users local solo y no tiene none Relación con el Active Directory.

  Para una correcta instala el todo instalacion software "of arriba abajo" where por el Single Sign - on is if todo el proceso goes well tendras el vCenter operating system.

  Kind regards

• vCenter install error: Error 25003 Setup cannot create vCenter Server repository

  Hello

  I build vCenter server install 5.5.0U1C with the two server model where the instance a host DB and others welcome rest the vCenter Binaries.Below is the error that I got when running vCenter

  I ran the query

  SELECT CASE WHEN 'A' = 'a' THEN 'NOT CASE SENSITIVE' ELSE 'CASE SENSITIVE' END

  
  

  I got back as "NOT case sensitive.

  
  

  But if I'm correct error it says precisely because of the failure as "the database is installed using insensitive case" that proves this query.

  
  

  I fell the Mode Case Insensitive mode case-sensitive mode by changing the ranking "SQL_Latin1_General_CP1_CS_AS'.

  
  

  I have this time received the error

  
  

  

  
  

  I have no idea which has now gone wrong make install failed.

  
  

  BTW, the version of the Client on the remote DB server and application server are the same and I use MS SQL 2012 SP1 with windows 2008 R2 SP1 on windows OS both side.

  
  

  Please help me find the solution, I have really now clueless with the cause of it.

  
  

  
  

  Thanks in advance

  
  

  BR,

  
  

  MG
  

  Nevermind, I got this problem fixed by the server being destruction and reconstruction new virtual machine and install this on it.

• Chargeback add vcenter SQL error

  Hello

  I'm trying to adds a server vCenter ChargeBack.

  I get the following error message:

  The invalid vCenter Server database. The vCenter Server database must have the following views: VPXV_HIST_STAT_DAILY, VPXV_HIST_STAT_WEEKLY, VPXV_HIST_STAT_MONTHLY and VPXV_HIST_STAT_YEARLY

  On this post, (https://communities.vmware.com/thread/236730) say that the sql account must be db_owner on the vCenter database, I have that and say that we create the views.

  In SQL management Studio, I see these views, but exactly. I have the same names, but like this: VMW. VPXV_HIST_STAT_DAILY, VMW. VPXV_HIST_STAT_WEEKLY...

  Is this normal?

  Best regards

  Hello

  I solved my problem.

  In fact, I changed the schema (in sql) for the user to sql dbo to MVW vCCM and I can add a vcenter.

• vSphere SSL for the Web Client (device vCenter) certificate error

  Hello

  I installed ESXi 5.5 and right once I deployed the device vCenter. After the configuration and a few reboots, I navigates to the web client, and I get this error when I try to logon:

  "Based on the current configuration, the authentication server's SSL certificate was not reliable."

  I have until this google everything on the subject and outside tutorials on how to change certificates in the Windows version of vCenter, nothing on the device of vCenter. I was happy when I found the 'Certificate regeneration enabled' checkbox, but that did not help either. I can test successfully SSO settings in the control panel of vCenter.

  Everyone please?

  
  

  Edit: I should also mention that I am not able to connect to vCenter with the vSphere client. I get the "Cannot complete the connection by incorrect username or password". I use [email protected] as user name.

  Have you tried that? VMware KB: Troubleshooting the vCenter Server Appliance with Single Sign-On login

• Update 5.1.0U1b to 5.5 vCenter fails (error 1603)

  I keep getting errors when trying to install vCenter 5.5 Single Sign-On which translates a restore.

  I tried with a Simple installation and custom installation.

  I tried already to remove the CIS folder and install Vmware-python in the requirements folder and check the value of FqdnIp in the registry.

  Check the log, I found the error 1603 in it.

  OS: Windows 2008 R2 SP1 Std.

  DB: MS SQL 2008 R2 SP2 Std.

  Thank you very much for your help!

  Hi Rapster,

  1. the journal indicates that the FqdnIp registry key has no value in this document, you would confirm please?

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc. \VMware Infrastructure\SSOServer\FqdnIp.

  Please also attached the certificate SSL SSO to see what value is there to object and subject ALT name

  2. If your SSO 5.1 was installed after joining a domain, it seems that Yes, based on the journal, for example, vc. SOFTWERK.local, then the registry should have value of

  VC. key FqdnIp SOFTWERK.local.

  Please check the following points if SSO 5.1 was installed with machine joined to a domain:

  1 FqdnIp registry key has a correct value of the domain COMPLETE (for example the vc. SOFTWERK.local)

  2. make sure SSO SSL certificate has same FQDN in object / subject Alt name

  3 If the CIS under %ProgramData%\VMware folder exists, delete or rename the folder CIS

  4. repeat the upgrade of SSO

  Thank you.