VCSC non-traversal license installation

Similar Questions

• Question of the use of non-traversal license

  Hello world! Wanted to ask a quick question. If endpoint makes a call to another endpoint (via WAN) and each of them is registered in VCS on their sides and then if it will use the non-traversal license of VCS or just one of them?

  Thank you

  Each call and the end point that enter or exit the VCs will have 1 license appeal.  What determines the type of license, either Non-traversal or crossing is less (confirmed by the help guide).

  Calls of traversal VCS: VCS standard video or audio calls, including business-to-business calls, B2BUA calls (for encryption of the media or ice) and interoperability or sent through gateway calls to third-party solutions where the VCS as well takes the call signaling and media of the call. Each call consumes a license of traversal appeal.

  VCS non-traversal calls: here's the VCS standard video or audio calls where the traffic goes through VCS, but the media passes directly between the endpoints, or between an endpoint and another system in the direction of the call. Each call consumes a license non-traversal call. Note that Lync B2BUA calls are classified as non-traversal is called (even if media cross the VCS).

• License NON-Traversal VCS controls

  Hi all

  Our control of VCS have alarm (warning the number of concurrent calls to non-traversal capacity has approached the limit allowed.) and I want to know what kind of appeal to eat non-transversal license for me to understand and decide how many additional license we need. Vascular control VCS was 10 Non-traversal and 100 courses license. Please help me to check which license (crossing or Non-traversal) used and how lincenses required by call.

  1. VC (EX90) endpoint to endpoint VC (C60), recorded in the same control VCS

  2 Movi account/SIP-UA to Movi account/SIP-UA, recorded in the same control VCS

  3 VC endpoint to Movi account/SIP-UA, recorded in the same control VCS

  4 VC endpoint (EX90) endpoint VC (C60), recorded in different control VCS

  5 Movi account/SIP-UA to Movi account/SIP-UA, recorded at different control VCS

  6 VC point endpoint to Movi account/SIP-UA, recorded at different control VCS

  7 VC endpoint to MCU, recorded in the same control VCS

  8 Movi account/SIP-UA to MCU, recorded in the same control VCS

  9 VC point endpoint to MCU, recorded at different control VCS

  10 Movi account/SIP-UA to MCU, recorded in different control VCS

  11. point endpoints at the endpoint Public VC VC (go VCS Expressway)

  12 Movi account/SIP-UA Public VC endpoint (go VCS Expressway)

  NOTE: I checked recording device in the control of VCS and I see that the protocol endpoint VC both H323 and SIP, while the account Protocol Movi was SIP.

  Take a look at the "call Types and Licensing" section of the VCS administration Guide on pg 378 to detail what types of call will consume what type of license.

• Courses and non-traversal calls

  Hello

  Can someone explain in simple terms what are courses and non-traversal calls?, what is the difference? And also the VCS control below must traversal licenses?

  CTI-VCS-CONTRL-K9

  Control of VCS

  Thanks in advance.

  If you have two endpoint C-series (i.e. CTS-SX20) both recorded on VCS control and also capable of reaching out directly between them (a routing), then in general the call will address as non-traversal call Endpoint, so no license courses will be necessary.

  However if these Endpoint calling each other, but using different protocol (i.e. an end point registered in VCS control only with H323 and other endpoint registered on the CV with SIP), or different IP version (that is to say one with IPv6 and other with IPv4 registration), then control VCS remain media routing in order to manage such scenario of interoperability which will require licensed traversal appeal.

• Make use of crossing call instead of Non-traversal on Cisco VCS - C

  Hello

  I have a test of Cisco's VCS running non-traversal 20 and 100 license course. I need once I have start a session of Cisco's Jabber client to one of the cameras (Studios). I want the VCS to consume a license of traversal appeal?

  Is - this possibe?

  Hello

  If you enable interoperability and call Jabber on sip to H323 endpoint. <->SIP h323 will consume a crossing

  Lisence.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Questions call non-Traversal

  Hi all

  I implement some new devices of telepresence:
  Site has
  VCS-control (X8.1)
  VCS-Expressway (X8.1)
  MCU 5310 (4.4)
  C40 codec (7.0.2)

  Site B
  (7.0.2) codec C20
  The site has different subnet

  I have enabled H.323 & SIP on the VCS - C and tested several calls between Site A & b. whenever calls go out H.323, SIP, or SIP to H.323 from the C40 for the C20 or vice versa, that there is no problem. Both sites receive video and audio.
  Whenever I force the same protocol. That is to say, H.323 to SIP for SIP or H.323 and making the same calls, the site B (C20) is not video of the Site (C40). However the C40 receives both video & audio of the C20. What is interesting, is that if I do the same calls of the MCU, which is also in Site A, then there is no problem. So the problem is between the C40 and C20.
  Since I'm not physcally on sites because I do this execution remotely, I can count only on the stats I get from the GUI. I have attached a photo taken of the customer from the screen of the C20.

  Calls:
  Calls crossing
  C40 - C20 H.323 - SIP - call ok
  C20 - C40 H.323 - SIP - call ok
  C40 - C20 SIP - H.323 - call ok
  C20 - C40 SIP - H.323 - call ok
  MCU - C20 H.323 - H.323 - call ok

  Non-Traversal calls
  C40 - C20 H.323 - H.323 - no video received the C20
  C40 - C20 SIP - SIP - no video received the C20
  C20 - C40 H.323 - H.323 - no video received the C20
  C20 - C40 SIP - SIP - no video received the C20

  This suggests that there is only a problem on the C20 in non-traversal calls. I don't want to use licensed traveled between these 2 points of termination.

  Thank you for your help. Any input would be greatly appreciated.

  -Greg

  When you make an H323, SIP call, all media is 'mandated' by the VCS, so they would still work even if they cannot ping each other.  When you do a non-traversal call, media flows directly between the endpoints.

  Ping a C-Series, connect to the codec via SSH (same credentials as the Web browser), and then type systemtools network ping 10.1.1.1

  Where "10.1.1.1" is the IP address of the remote end point.

• An unexpected error occurred during the generation of the Volume License Installer

  I'm building a Volume of NI Developer Suite 2016 DS1 License Installer.  I created the master suite and the installer from the DVD device drivers successfully.

  However, when I try to create tools Xilinx DVD separated issued with the Game Developer on I get the error "an unexpected error occurred during the generation of the Volume License Installer '.

  There is no other information.

  Nobody knows what is this 'unexpected error' and how to work around.

  Just worked it out.  The DVD contains 2 sets of tools; 14.7 & 2014.4.  You must come down with each of them separately, you can't just select the top-level of the DVD folder as you do with all the other discs in the package.  Would be useful if the error to a little more explicit.

• None of licenses appears in el portal of public administration. that pudo haber pasado?

  None of licenses appears in el portal of public administration. that pudo haber pasado?

  Please contact support:

  Contact the customer service

  Concerning

  Megha Rawat

• non-profit License

  Hi, I would like to get illustrator with a non-profit License. Information on the Web site lead to a dead-end site that explains what nonprofits are eligible (what we do). I have cc in hand and would just like to make a purchase. Anyone know what are the steps or have real coordinates of Adobe?

  Thank you!

  OK, the answer is that Adobe does not sell to non - profits at a discount. You must obtain a license from a reseller like crawling Tech | Software for Non-profits and churches.

• Volume License Installer does not select LabVIEW 2014 must be installed

  After you create an installer of LabVIEW 2014 at 3.1 VLM volume license, I ran into a strange behavior in the installer:

  Even if I chose to ignore all the stuff of LabWindows and don't understand that LabVIEW 2014 and additional modules that we have a license for when I created the installer - the installer itself, by operating, only LabWindows-substance previously chosen for the installation, when you get to the part of the selection of modules... All the parts that were actually included in the Installer are unselected (!).

  I always try to rebuild anywhere Installer, but maybe this is a known problem or has a solution (I guess I can modify some files in the installer to tell him which parties should choose by default, it is not dynamically linked to the license is available on the server now, so that the installer should detect that we indeed have a licens LabVIEW 2014 and so select it for installation?).

  Looks like the license was not quite ready for 2014, even though his name was declared 2014... got a new OR and it works very well.

• Windows 8, a license installation

  Hi, I bought windows 8 Pro when first, he came out and was offered, from PCWorld.  I installed the 64-bit disk on my laptop. I've since upgraded to 8.1 and then Pro 10 windows. When I bought windows 8, it came with 64-bit and 32-bit discs. Can I install them on another computer and keep my windows 10 Pro on my other computer?

  Concerning

  RS

  Hello

  No, you can not install the 8 discs anywhere elsewhere.

  When you get a set of 64/32-bit discs retail, you can install a 32-bit or 64-bit, but not both at the same time.

  One license is for a single installation.

  _________________________________________________

  On the free update of Windows 10:

  The key/license Windows product to describe the operating system, Windows 7, Windows 8.1, etc. is absorbed by upgrading Windows 10 during the installation process and becomes an integral part of the active Windows 10 final installation.

  The license qualifying operating system, either Windows 7 or Windows 8.1, etc. cannot be used anywhere else, or in a dual boot with Windows 10.

  See you soon.

• free or non-commercial license

  Hello!

  Don't have Adobe free license or non-commercial options?

  If not, how can I reactivate my 30 trial for Adobe AI? "" I need now.

  Thank you

  There is no free license for Illustrator and trials are usable for 30 days.  If you need free software then you will need to look elsewhere.

• Upgrade to HD a MBP to a SSD affects the numbers of activation/seat for non - CC licenses?

  I just updated my drive to an SSD and completely forgot to turn off my Adobe software (non - DC) (Photoshop, Premiere Pro, Acrobat, Lightroom, and Indesign). All except Premiere Pro are the latest versions (non - CC).

  To my great relief, all Adobe applications open without questioning me of licensing issues, however, contact Adobe to reduce my activations? Don't have this SSD improved the result of the additional activations that could cause problems down the road?

  Thanks in advance for the advice.

  Whenever you install and activate you used one of your activations allowed... so looks like you used now two activations

  If you want to install and turn on again, you will need to contact Adobe to get your adjusted number of activations

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• "Standby Database" license installation wizard

  It only needs a so-called grid control Assistant 'Add Standby Database' takes licesning?
  
  Apparently, it's missing in the dbconsole EM...
  
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28295/GUI.htm#i1005702
  Oracle Enterprise Manager Grid Control allows access to the full set of data guard 10.2 features. There are limited Data Guard only monitoring features in Enterprise Manager Database Control.

  user9198889 wrote:
  It only needs a so-called grid control Assistant 'Add Standby Database' takes licesning?

  Apparently, it's missing in the dbconsole EM...

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28295/GUI.htm#i1005702
  Oracle Enterprise Manager Grid Control allows access to the full set of data guard 10.2 features. There are limited Data Guard only monitoring features in Enterprise Manager Database Control.

  It is not a problem with the license, it is an inherent limitation of dbcontrol. He (dbcontrol) works with a single database. Create/manage a DG of installation, you must be able to work with multiple databases, where the unique flavor of OEM that will do GC.

• Effect on the license installation ID if CS5 Master trial suite is installed?

  An installation of InDesign CS3 license can be stored (with ID point product upgrade options future intact) If a trial of CS5 Master Creative Suite is installed on the same computer?  If the end of the period of the trial and of a Creative Suite license is not purchased, the point prior product ID license will survive?  Or he are effectively crushed by the Creative Suite test facility?

  Similarly, if a more Creative CS5 trial expires can a product license to point to one of its programs to be installed on the same computer?

  Thank you.

  Lee

  Oh, to answer your last question. If the trial expires and you want to just buy a product, simply enter the serial number of the product

  at the command prompt. Who will activate the product and let the other one apps.

  Bob