color laserjet cp1025nw print streaky

Similar Questions

• Color LaserJet CP1025nw: printer does not print after changing cartridges

  I just inserted cartridges M, Y and C in my printer.  They are official cartridges 126 a.  I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out).  I inserted one at a time, waiting after each insertion for the printer to run through its cycle.  Then I tried to print a color print job with no luck.  Then I tried to print a simple typed page - once again, no luck!

  Is it possible to print a test page?  I don't get any messages on my computer.  When I look at the print queue, it says "error printing".  Help, please!  Thank you.

  Note later: my mistake!  I turn on the blue light from the top; Once lit, the printer has been good to go.  Can tell you that I'm not very technologically savvy?

  So it works very well now?

• My Color LaserJet CP1025nw print a vertical line of blobs of different color structured about 4 mm wide

  

  What it means? How to fix the printer?

  I solved the problem when to replace the print with the new drum.

• The laser color HP LaserJet CP1025nw printer cannot print - points held in the queue

  I am running Windows 7 64 bit and my laser color HP LaserJet CP1025nw printer fails to print jobs in the queue. I turned off the printer accidentally as he was preparing to print a document, and since then I am unable to get the printer to work. I used the HP print and Scan doctor and he said that he had detected and solved a problem with the queue in vain the printer print a test page. What other options do I have? Thank you.

  Rrolley, looks like you have a problem with the print queue of the printer. To start, just to tell you (that you probably think) it is not good to switch off while he's getting a print request. To resolve this problem, I recommend that you turn off the printer and the computer completely and cut the power for about thirty seconds. Then power the two machines back on, and when they started well then try the print job.

  Let me know how it goes and I'll get right back with you!

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• HP color laserjet 2605dn printer

  The HP COLOR LASERJET 2605dn PRINTER is compatible with Windows 10?

  HP LaserJet 2605dn printer range is compatible with Windows 10. Check below link for compatibility
  http://www.Microsoft.com/en-in/Windows/compatibility/CompatCenter/ProductDetailsViewer?name=HP%20LaserJet%202605dn%20Laser%20Printer & vendor = HP & local is 1033% 2C3081% 2C4105% 2C16393 & ModelOrVersion is Q7822A & BreadCrumbPath = 2605dn % 20 & LastSearchTerm = 2605dn %2 B & Type = Hardware, & tempOsid = Windows % 2010

  You can download drivers install n the link below:
  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=1140730 & swLangOid = 8 & swEnvOid = 4191

• Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

  I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

  1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

  I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

  My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

  Please help, even the HP sales technician unable to answer me to this questation.

  Hello

  The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

  Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

  http://h10032.www1.HP.com/CTG/manual/c04475955

  You can download the HP Universal Print Driver below:

  http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

  As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

  It is a customized operating system version includes only the components of the operating system selected for specific needs.

  Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

  Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

  Kind regards

  Shlomi

• HP Color Laserjet 4700n printer series

  Hi, I am trying to install printing wireless on my HP Color Laserjet 4700n printer in my office with three different computers. However, I have trouble finding how to do this on every computer in the office. I would be grateful if someone could help me with this or even tell me if wireless printing is possible with this series. Thank you.

  According to the data sheet for the Laserjet 4700n printer range, this printer has only these methods of connectivity. Unfortunately, wireless printing is not mentioned.

  LaserJet 4700n connection methods:

  • Improved the card slots of input/output (EIO) for connectivity option. (Network connection using an embedded HP Jetdirect print server is standard on HP Color LaserJet 4700n, HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn and HP Color LaserJet 4700ph + printer.)

• HP color laserjet 2840 printing and copy blank page

  Hi all

  I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea?

  Sorry for my bed English

  Thank you

  Try this test.

  Printed page in after you get the blank page open the access door and see if you can move the carrousel by hand.

  If the carousel will rotate the carousel latch is stuck.

  The lock can be fixed by disassembly of the valve and clean some foam sticky residue deteriorated and its replacement by a thin piece of material. I use stickers very thin markers of a dollar store.

• Color Laserjet 4600 printing Cyan (blue) on the face back papers

  We have a Color Laserjet 4600 printer. For a long time, it has been printing cyan on the back of the documents that are printed.

  Recently, I cleaned the front "roller", which is long and looks like a long piece of rubber/plastic black thick.

  It printed fine for a few leaves, then again blue printing on the back of the paper. The front of the book seems perfect, however.

  I also noticed more cyan toner, which is "stuck" on the front "roller" of the printer.

  I went back to take a picture of him, but I couldn't find on the "roller" to show you.

  Here are some photos to show you what I mean:
  http://imgur.com/a/wBYxx

  What can I do to fix this?

  The part number of the kit is Q3668-67925. Very easy to replace. You just remove the screw at the top of both sides and just slide the old one out and put the new. You must first remove the top of the foot. If you have a crazy glue container, the people were able just to glue the broken pieces and put back once the glue has hardened.

• HP Color LaserJet CP1515n printer

  I have a dv6 Hp Pavilion Entertainment PC with Windows 7 Home Premium. System type: 64-bit operating system.

  But I have a problem in istalling the software for HP Color laserjet CP1515n, the bed of the cd that came with the HP Color Laserjet CP 1510 Series printer.
  Please what do I do?

  Hello

  I would say that you can download and install the driver from the driver following HP support link and check if that helps.

  Software downloads & driver - HP Color LaserJet CP1515n printer:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3422468

  Hope the information is useful.

• Color LaserJet 1600: print error for Color LaserJet 1600 not solved with troubleshooting or relocation attempt

  I get an 'impression' error when trying to print any document. Have used the convenience store, who said that a print job has been blocked and that the authorized troubleshooter. Second attempt, same result. Attempt to uninstall printer but had received "implemented encountered abnormal program execution. Implementation will stop. "The next window: your printer may have been incorrectly installed, try to reinstall with the recommended settings. Got it but no change. Try "add/repair" printer with no solution. INFO: Color LaserJet 1600, PN # CB373A, Windows 7 Home Premium

  Hi Brenda6,

  When you reinstall the printer helps reinstall you by plugging the USB of the computer? Or are you downloading from the HP site? I recommend that you disconnect the printer from your computer by unplugging the USB or disconnect the connection without wire and then go to the HP support for HP Color LaserJet 1600 printer. Find your printer driver and reinstall.

  I hope this helps!

• my hp color laserjet 3500 printer can work with cloud services

  my hp color laserjet 3500 printer can work with cloud services

  The printer listed does not support cloud services.

  Printers supported by cloud Services

• Color LaserJet CP1025nw: new PC Windows 10, said CP1025nw is Offline after find and install it.

  My CP1025nw is on my wired network Ethernet. My new desktop to Winows 10 PC finds it and it installs, watch even correct for this IP address in the info page of HP. But it will not print to it. Says it is Offline, tells me to turn it on. But if it is not enabled, how my PC find it and get his IP address? I can even ping by using Windows PowerShell.

  My other PC on the network print to it. This PC also running Windows 10, as an update to 8.1

  I tried to remove and re-add several times. Have rebooted several times, turned the printer on and off many times.

  BTW, I do not use the direct wireless functionality for this printer. It's all pure Ethernet/TCP-IP, Wired.

  It looks like a bug in the driver. How can I get a driver that works well, like my other 10 PC of Windows? I use all the HP tools that I can find. They say that there is no update pending for this driver.

  Hi @Allie_Sch,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP LaserJet Pro CP1025nw color printer disconnect. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It looks like it could be communication issue between your computer and the printer or there is a problem in Windows.

  I would like to start by performing the steps in these guides, Printers HP LaserJet - "offline" Printer Status Message appears and HP LaserJet Pro CP1025nw printer - printer does not maintain the wireless connection.

   

• Dark LaserJet CP1025nw print

  I have a new colourlaser LaserJet CP1025nw. problem is much too dark impression and that's why the cartridges run out too fast, especially the black one. I try to color changes in the settings of the driver, but these changes isn't any effection. I have iMac with OS of Yosemite.

  It seems to work now. Settings of the printer seems to work when the printer is connected with the USB cable for iMac better.