VCSE 7.1 to 7.2 error software

Similar Questions

• Avira scanner gives error software exception error

  I have Vista and IE8.

  Recently, I uninstalled Mozilla Firefox.  I then downloaded last June 2011 updates to Windows Defender, and then I updated the Avira anti-spware for June, which is a new version of Avira.

  I then went to scan with Avira and analysis goes 95% complete and then I get an error message that interrupts the scan and says "error exception 0xc0000409 software at 0x684a276e.»  Receive this message although Avira is allowed to run with the Windows Firewall.

  Went to add/remove programs and selected 'Edit' to solve the problem.  After a series of changes with the scan Wizard, I still get the same message on the avira scan (exception error software 0xc0000409).

  This means a lot of time.  I spent the last week trying to solve this problem.

  Y at - there anyone out there that has a solution.  It was not until I've updated, Windows Defender and Avira.

  Thank you in advance for any help you can give.

  Best,

  I would contact Avira. It seems to happen from time to time; See the example of the enemy

  http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=127508

• Need Driver Software for Motorola w376g. Error: "software driver can not be found.

  Original title: software Motorola w376g driver

  Hello

  Where can I get software driver for a Motorola w376g Tracfone cell phone?

  What I'm trying to do is to load a ringtone from my phone to my laptop and I get a message error "software driver can not be found.

  Is this possible?

  Thank you

  Deb

  Hello

  Have you been able to use the cell phone with no problems before?

  Step 1: You can try to download the drivers from the link below and install it.
  http://www.Motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

  Note: Please restart the computer after you install the driver.

  Step 2: You can also try to check the same cell phone manual to use the mass storage option. You can use this option for mass storage to access the data stored in the cell phone.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.

• Pavilion Sleekbook 14: Video memory check error software

  I need help. My HP Pavilion Sleekbook 14 fell from my table and could no longer boot the operating system (MS Windows 8). I ran system update where, in results all went except to verify the video memory which is indicated as the software error.

  Is there anyway to relive my drive and fully recover my files? Thanks a lot for any assistance which will be extended here. More power for the group.

  @budweiser1962 ,

  Hello and thanks for the display on the HP support forums.  If your system has had an accident like this, and recovery is not responding it means there is physical damage.  This will require a repair.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Cannot install the Steelseries Shift NSIS error software

  Original title: NSIS error

  I try to install the software Steelseries Shift to run the new keyboard that has the world of Warcraft cataclysm, but whenever I get NSIS error and a window that says Steelseries Shift has encountered a problem and needs to close.  Basis of keyboard keys work, however, we are unable to activate any game due to the failure of the download process.

  Hi electricfreddie,

  ·         What is the exact error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Error: Software of "Operation not valid Floating Point" as he tried to run Iolo drive scrubber

  Original title: cannot run A clean product Up

  I ran Drive Scrubber from Iolo now for 2 consecutive years. Now when I try to run it, it gives me an error message that says "invalid Floating Point Operation". I don't have any idea what it is. What is and how to clear up?

  Since this is a 3rd party software with which I am not familiar and the manufacturer of the product is not able to help you, I suggest you go back to a system restore point to before you have experienced a problem with the Drive scrubber the Iolo software.

  Follow the steps in the following article.

  Article number: 306084 - How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Marilyn

• Windows XP error software unknown 0xc0000409 leading to problems with wireless internet connections

  When I start Windows XP, I get the message (translated from the German, hope that's OK): the exception 'unknown software error' (0xc0000409) occurred in the application at 0xc0044a920. The effect seems to be that my computer can't find any wireless connections, although there are four or five in the House. I tried to download the latest Windows and it worked for awhile, but only a day or two.
  Hoping you can help,
  ed_ward

  ed_ward,
  Thanks for posting on the Microsoft answers Forum.  I suggest that you make sure that you have the latest drivers for your wireless network card.  If you still have a problem after the update of drivers, then you can perform a clean boot, see if the problem persists or not.  Here is a link that explains the clean boot:

  Follow the steps in this article to resolve problems with a clean boot.

  http://support.Microsoft.com/kb/310353

  Boot advanced troubleshooting: http://support.microsoft.com/kb/316434

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• try to install a printer and receive a message error «software cannot be installed...» To resolve this problem, log off and log in as a user with administrative privileges.

  original title: help installing a printer

  I try to install a printer on my computer and continue to receive an error message indicating that the "software cannot be installed using the command" run as ".". To resolve this problem, he told me to sign out and then sign in as a user with administrative privileges. I am the owner of this computer and that you have had for several years. I need to know how to solve this problem. Can anyone help?

  Hello

  have you tried right clicking on setup.exe printing software then run as administrator?

• HP ENVY 4501 - 1627 error software installs

  I just bought a HP ENVY 4501 printer all-in-one and went through all of the printer without any problems. When I put the CD in my computer (windows 7-64) and you try to install the software it comes up with error 1627. I don't know how to fix this or what is the problem that it has this error.

  I solved the problem by doing a full factory reset out of the condition of the box.

• Get error software exception 0 x 40000015 occurred in the application at location 0x0141Fafd the connection in Windows 7

  Original title: I get the message "software exception 0 x 40000015 occurred in the application at location 0x0141Fafd.

  I have a desktop with windows 7 on it.  "I get the message," ' software exception 0 x 40000015 occurred in the application at location 0x0141Fafd.

  does that mean and what should I do.

  May depend on which program and in what context you see all these err

• Cannot install error software "need to privileges."

  Original title: administrator Windows 8

  I've just set up a PC in Windows 8. I set up a password and not other users. After setting up, I did a transfer of data from my old XP machine. Everything was going well until I tried to use my Quicken Online Backup. After some research, I realized that I had to install the backup of Quicken software. When I tried this I got a message that said I had to have administrator privileges and it appeared the accounts of users of my daughter and the deceased wife. I had transferred their user information and accounts because I was warned that if I didn't I might not be able to access some files that I need. When I start the computer a sign in the screen appears to me only. I get my password and I can use the PC. When I start the PC, there is no other connections of the user. I tried to view the user accounts but get the popup that notifies you only an administrator can access this information and offers you the log of my daughter in. My daughter doesn't remember his password. Otherwise, I can use the machine. I loaded Quicken 2012 as well as the software Trend Micro security without problem. This backup Quicken should do something with the registry files, but they are mandated me. I don't understand how I got fired the administrator and other users apparently installed as administrator. Any suggestions? I don't like Win8 but when I bought the computer DELL at Costco last year I had not given the choice. Now I see they are reintroducing Win 7 on DELL computers.

  See if the first two suggestions are useful.

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How can I remove the user accounts on Windows 8?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/how-do-i-delete-user-accounts-on-Windows-8/681c56f4-426D-4bc4-B667-2e7f1214852a

  Delete a user account
  http://Windows.Microsoft.com/en-AU/Windows7/delete-a-user-account

  In Windows Vista, 7, or 8, administrators have lower privileges, the same as Standard, unlerss users you run as have privileges by right-clicking and selecting the option 'run as administrator '.

• software exception (0xc001000e) in application on site 0x7c812fd3

  Hello, after installing the new version I got following message (I translate from he formed the Czech language):
  
  software exception (0xc001000e) in application on site 0x7c812fd3
  
  What can I do? Are there opportunities that my Skype works on windows XP?
  
  Thank you, best regards, jakub.

  Hello, I have creathed the new profile and it helps. However, after launchign Skype version 6.14 I got the exception error - software exception (0 x 40000015) in application on site 0x00eb5b0e.

• Advanced registry optimizer reports many errors after Microsoft updates

  I recently downloaded 22 this so-called upgrades and installed on a computer with zero (0) errors before downloads.  After the download and installation of my Registry Optimizer program advanced recorded 266 errors as follows.  Active X and com = 16 errors; Types of files = 12 errors; history = 1 error; software = 50 errors. and Deep Scan = 187 errors.  My computer would be difficult to restart and was so slow to respond that I couldn't believe it.  I managed to run the Advanced Registry Optimizer, which exposed the errors and he was able to fix everything, but 3.  Is this a result of sloppy programming or what? I don't know if I have to use microsoft update programs again. Any comments?

  Moved from feedback

  Original title: errors in the downloads and upgrades

  Hello

  http://answers.Yahoo.com/question/index?QID=20080531044554AA5HGCi

  http://answers.Yahoo.com/question/index?QID=20100613185256AAPkQDN

  There are some bad reviews about Advanced Registry Optimizer.

  And a modern operating system does not need a cleaner registry to serve thereon.

  These cleaners registry and TuneUp Utilities can do more harm than good as they claim to be able to make and they find errors in your operating system to justify their cost and their existence.

  See you soon.

• MIDLET error in Cisco IP 7975

  Hello world

  I have a problem when I try to load the MIDLET in the IP Phone 7975, I rececive an error: "error, contact administrator.

  I configured two MIDLETS, one for the Publisher and one for Subsriber services.

  The version of the devices are:

  Cisco CUCM--> 9.1.2

  CTS-500 37 "--> 1.8.5 (4) _P1"

  IP Phone 7975--> SIP75.9 - 2-1 s

  Version of MIDLETS is--> Transport SPM - 1.8.2 - P1-1 s

  The IP Telephony Service is set up fine because I copy the url of this VoIP Service and no error in the browser.

  The CTS 500 in the device information obtain the IP, Mac address, and the version of the IP phone; but in the details of the status indicates the following:

  Connection: error; Software: Impossible to retrieve the version of the software

  In the URL of the IP phone, I got the following newspapers:

  | == Syslogd NPT == Thu Jan 23 13:34:35 2014

  ====================================================

  6422: NO 13:34:35.356640 JVM: Boot Loader Module | cip.midp.midletsuite.InstallerModule:? -Download of Jad... MIDLETS SUB

  6423: ERR 13:34:35.405343 JVM: Boot Loader Module | cip.midp.midletsuite.ah:? -L'Url http://X.X.X.X:6970/TSPM-1.8.2-P1-1S.jad is available, use this IP address.

  6424: ERR 13:34:36.199305 JVM: 13:34:36 | Install Exception: Missing Office name:

  at cip.midp.midletsuite.ah.h () V (unknown Source)

  to cip.midp.midletsuite.ah.a (Lcip/midp/midletsuite/u; Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.ah.a (Lcip/srvc/z; Ljava/lang/String; ZZLcip/midp/midletsuite/p; Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.ah.a (Lcip/srvc/z; ZZLcip/midp/midletsuite/p; Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.InstallerModule.a (Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.z.a (Lcip/midp/midletsuite/b; Lcip/sys/x ;) V (unknown Source)

  to cip.midp.midletsuite.z.sinkMessage (Lcip/sys/x ;) V (unknown Source)

  to cip.sys.n.sinkMessage (Lcip/sys/x ;) V (unknown Source)

  to cip.sys.aa.a (Lcip/sys/ad ;) Ljava/lang/Throwable; (Unknown source)

  at cip.sys.aa.e () V (unknown Source)

  at cip.sys.l.run () V (unknown Source)

  to java.lang.Thread.startup (Z) V (unknown Source)

  6425: NO 13:34:36.203955 JVM: Boot Loader Module | cip.midp.midletsuite.InstallerModule:? -Error/Install midlet cancelled... MIDLETS SUB

  6426: NO 13:34:37.807561 JVM: Boot Loader Module | cip.srvc.Services:? -Service url used http://X.X.X.X:8080/ccmcip/getservicesmenu.jsp

  6427: NO 13:34:37.809126 JVM: Boot Loader Module | cip.srvc.Services:? -Service url used http:/X.X.X.X:8080/ccmcip/getservicesmenu.jsp

  6428: AVT 13:34:39.372046 JVM: boot loader Module. class cip.srvc.XsiMIDletSuiteResponse: (unmanaged updateStatus (-0))

  6429: ERR 13:34:39.393814 JVM: Boot Loader Module | cip.midp.midletsuite.ah:? -The http://X.X.X.X:6970/TSPM-1.8.2-P1-1S.jad Url is available, use this IP address.

  6430: ERR 13:34:40.212716 JVM: 13:34:40 | Install Exception: Missing Office name:

  at cip.midp.midletsuite.ah.h () V (unknown Source)

  to cip.midp.midletsuite.ah.a (Lcip/midp/midletsuite/u; Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.ah.a (Lcip/srvc/z; Ljava/lang/String; ZZLcip/midp/midletsuite/p; Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.ah.a (Lcip/srvc/z; ZZLcip/midp/midletsuite/p; Lcip/cfg/XmlServiceObject ;) V (unknown Source)

  to cip.midp.midletsuite.InstallerModule.a (Lcip/srvc/bj; Lcip/MIDP/midletsuite/p ;) V (unknown Source)

  to cip.midp.midletsuite.z.a (Lcip/midp/midletsuite/b; Lcip/sys/x ;) V (unknown Source)

  to cip.midp.midletsuite.z.sinkMessage (Lcip/sys/x ;) V (unknown Source)

  to cip.sys.n.sinkMessage (Lcip/sys/x ;) V (unknown Source)

  to cip.sys.aa.a (Lcip/sys/ad ;) Ljava/lang/Throwable; (Unknown source)

  at cip.sys.aa.e () V (unknown Source)

  at cip.sys.l.run () V (unknown Source)

  to java.lang.Thread.startup (Z) V (unknown Source)

  6431: ERR 13:34:46.631911 JVM: call activate listening for incoming http connections

  6432: ERR 13:34:46.692003 JVM: call activate listening for incoming http connections

  I have change the address IP of CUCMs oft X.X.X.X.

  I followed the documentation for you register very well and to clear the factory default IP phone, removed the old midlet but I do not understand which works very well.

  If I don't call other video endpoints of the CTS is working too fine and the line shared by the CTS and IP phone.

  Can someone help me?

  Thanks in advance.

  Best regards.

  Hello

  You will need to change the name of the Service and the ASCII service name as follows:

  TSPM-1.8.2-P1-1S

  And then reset the phone of CUCM.  Let me know if that clears it.

  -Jonathan