VDI hardware options

Similar Questions

• Hardware options for synchronization

  Wondering if someone could help to "classify" these approaches for synchronization.

  -TCXO with shared references/PPS (i.e. - cable MIMO or OctoClock)

  -OCXO

  -OCXO with GPS

  The 'standard' TCXO models require extra things (MIMO or OctoClock or external sources) to phase-locking and synchronize the time.

  The OCXO allows precise... but we don't know how this has an effect on phase coherence (and how long a time).  Presumably, you would still need something like a PPS both synchronize?

  With disciplined GPS devices, are you basically get consistency and synchronization time of phase since the GPS rather than external signal 'stuff '?  Or are there cases where you still need something like cable MIMO or OctoClock for more nail timing and synchronization?

  ---

  Brandon

  Hi Brandon,.

  Thank you very much for the information! I leaned more in detail in this issue, and much of your question depends on your hardware configuration and system. JamesB, awesome post! This is great information.  Add to that, for our GPS USRPS (NI USRP 293 x) Unfortunately, you can not use the Ref entries in, this split on the external clock won't be an option on this material. In this context, option (c) will be probably the easiest because it is exactly how the work of our USRP. Do you use a USRP NOR? If Yes, and you try to sync up to 8 of these USRP together, GPS could be the only real option.

  The extent of the direct wire vs precision GPS, direct wire is more accurate if you are using an external clock, which is more accurate than the clock on board and if you use a USRP which can use an external reference clock

  The NI USRP 2930 and 2932 both of OCXO who only are more accurate, but there is no way to retrieve the source of 10 MHz to another device, with the exception of a MIMO cable which is not good to use for 2 devices. This is why the direct wiring method exists only for specific scenarios:

  1. the use of MIMO cable for up to 2 devices

  2. using an external clock, and a separator.

  However, the internal OXCO does not you nothing good for the device plus two synchronization. With the help of a GPS antenna, clock discipline and a clear view of the sky will let each USRP use it of own OXCO and still be synchronized. It's not just GPS, it is using GPS information to adjust the already great time reference OCXO, which required each device to set its own clock. The following document shows the specifications for a USRP without a GPS antenna (just the precision OXCO) vs the OCXO accuracy in conjunction with the GPS disciplined in the section 4 (synchronization with GPS Disciplined oscillators on NI USRP 293 x):

  http://www.NI.com/Tutorial/14705/en/

  While I was looking for it, I also found this post on the forum who has had a similar question:

  http://forums.NI.com/T5/USRP-software-radio/synchronization-of-three-USRP-2932/m-p/2835772

  I hope this has been helpful!

• Hardware options for IMAQ in LabVIEW

  Hi people of LabVIEW,.

  I'm looking for some advice or inspiration for my current testbed with regard to material I should be looking to buy.

  I'm using LabVIEW for controlling an HD webcam, shooting on the façade of a captive in its currently got and I coded to take and save your photos via a normal button.

  The main problem is that the lack of quality of the webcam 2MP is not really enough for my post-processing based on MatLab. My ministerial camera (Panasonic DMC - TZ5) has no DirectShow, and so I can't use connected via USB in LabVIEW.

  Anyone has any ideas on possible 'LabVIEW-compatible hardware'-j' is an SLR (Nikon or Canon), but I don't know if they are even compatible. On these forums to research it seems that some people have had problems with SLRs, I want to avoid!

  Other options include ethernet and Firewire cameras. The only real constraint is a decent number of pixels and a good lens. Shooting through LabVIEW and the ability to control the camera to take pictures on captive command, or definition of a photo all seconds for 30 minutes is also required. I've got the complete LabVIEW suit, including Vision Add ons etc.

  Your comments and suggestions are welcome!

  
  

• HP Pavilion HPE h8-1111: Wireless upgrade - hardware Options network adapter?

  Hi, I am looking to change my Broadcom 802.11n WLAN adapt because of allegedly defective hardware.

  I was thinking to buy the same as that but given that its in a port "minicards", I was wondering if something "more great, better and faster" could be used to allow a more efficient connection to my WIFI.

  I don't know what might replace it, so my way of thinking of installing a new one of the same. It's cheap, it's easy, but if someone has any advice as to what could be better, I can use any kind of edge.

  I suggest that you are looking for an USB 802.11ac wireless adapter.  It is dual band (2.4 & & 5G).  I do not use one at this stage, but they have used in the past with great success.  It's certainly easier to install.  You can check with the manufacturer to ensure that your router is compatible with it.  Whatever way you decide to go, I suggest you to AC.  It is much faster and the future.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Problem with the Flash Player and safely remove Hardware icon

  I'm a casual pc user, so it's not very technical!

  I bought a new computer from Dell Studio One desktop in July.  I use it once or twice a day in general.  When I use it, I usually insert a flash drive so that I can save my documents, etc.  I also use the safely remove hardware option before removing the flash.

  Here's the problem: these days, the little 'remove hardware safely' remained in my taskbar with the green check mark on that.  When I click on it, it shows an option to safely remove drive F.  Until this problem, when I want to insert flash, Windows would label it drive F.  Now, all of a sudden, when I insert the flash, it becomes the G.  And I have this ghost f.

  It's not a huge deal, I don't know, but I do not understand what has happened.  Furthermore, I use Vista, and when finally, I guessed my way, I found the Code 47 as the cause of the problem.  Of course, Code 47 indicates that I left something trendy, but obviously, I have not.

  Any help out there?

  Hello

  I suggest check in disk for the driver letters which are present management and remove no matter what additional driver letter (e.g. f :/) and check if the problem is resolved.) Follow the steps mentioned in the article below.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What does mean 730-6370 fixed Hardware Configuration?

  I saw in the packing list, costs more than $300. What is this for?

  Place devices are only available in limited configurations 'fixed', unlike their other products. For example, some laptops can be ordered with a lot of different hardware options, so their configuration is not "fixed" as tablets.

  The cost is only average Dell of appeal on price which is basically standard components, such as card system on the list/invoice.

• All-in-one Photosmart HP 6525: HP Photosmart 6525 stopped properly print in black

  Happy Friday! I had a problem the last two weeks with my printer. I usually use the printer on a daily basis for school. I got the impression during 1 1/2 to 2 years and have not had a problem until now.

  Here is a list of what I've tried so far:

  • Aligned the printer
  • Clean print heads
  • Restored by default
  • Erased the vents on the ink cartridges
  • Clean the screens between the printer and the cartridge

  I did all the steps that I could find for troubleshooting on the internet. Is there something else I can do?

  Hello @chawna,

  Welcome to the Forums of HP Support!

  I understand that you are not able to print black ink of your HP Photosmart 6525 e-all-in-one printer. Thank you for all the troubleshooting steps you have already finished before reaching out for support.

  Unfortunately, at this stage, because you have already completed, troubleshooting steps listed here, the next step would be a hardware replacement as system within your camera HP Photosmart print head is defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective in your printer printing system is defective. On this model printer, printhead system is a non-replaceable element.

  I highly recommend to go to the Technical Support queue by phone in order to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the troubleshooting steps you have completed and the results of these measures.

  I wish you good luck going forward with this!

• 4315v All in One: Officejet 4315v All in One not copy, print

  I tried to copy a document. He fed properly and the printer seems to be print normally, but the output page was empty.  Then tried to print a document and the result was the same. There has been no recent changes to the computer configuration or network / config. I don't see a diagnostic tool for this version of Mac OS.

  Hi @rj148,

  Welcome to the HP Forums!

  I noticed your post on how your HP Officejet 4315v won't copy. I'm happy to help you!

  Please, try the steps in this guide, fixed the print quality issues. If this does not resolve the problem, contact HP phone support for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• HP officejet pro 8210: hp officejet pro 8210 - locking cartridge tab ink broken

  When you remove the black ink cartridge, I seem to have broken the small plastic tab in the bin to which the cartridge is inserted. Where can I get a replacement? I have no idea of the number or how to identify it.

  Hi @Balmoral,

  Welcome to the HP Forums!

  I understand that you have a broken with your printer HP Officejet pro 8210 part. I'm happy to help you!

  Please Contact HP phone supports for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that this post helps!

• 160 GB external hard drive of Gigastore is not recognized correctly

  Hi, hope someone can help me!

  I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

  When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

  Phil

  Hello

  It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
  Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
  If please connect the HARD drive and use the Add Hardware option

• Satellite P20 DVD ROM drive may not be recognized

  Hello

  I just replaced my DVD ROM drive, but I had a problem.
  It is a new DVD rom drive I ordered at TOSHIBA also.
  It could not be detected by Windows:
  -Tried to check on Device Manager, not detected
  -Tried to reload the driver, the same problem
  Note:
  Whenever I tried to re - insert the disc, the blue light in the control panel of my P20 beds (I understand, which means that the P20 detects the drive) but I don't understand, is that why Windows XP does not detect it or it does not alarm or error messages.

  Any help?

  Thank you

  Hello

  Try to use the Add Hardware option.
  This question is very strange, but I read on some sites, sometimes a whole new OS install CD player, brings back to life.

• Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

  Satellite L50 - A - 1 DG

  I would put my SSD in the PC and install win7 on it. But it does not work.

  I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

  Someone knows what's the problem?

  > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  This does not work with all models of laptops.
  As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

  One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

  You said that you are not able to access the BIOS after these updates.
  Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

  The comments appreciated.

• C7100 printer: printer C7100 display

  The screen of the printer's empty, with pale vertical patterns, like a line of letters is repeated from top down.

  Print worls OK, but I cannot read any message.

  Thank you for helping...

  Hi @Michèle999,

  Thank you for joining the HP Forums!

  I understand that your printer HP Photosmart c7100 screen is empty. I'm happy to help you!

  Please, try the steps in this guide, blank control panel display. If this does not resolve the problem, contact HP phone support for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Hope this guide helps!

• Laser Jet CP1025nw: No chain of ROM

  the network can connect only to the printer for about 60 seconds. so now more visible.

  The printer has been used wireless only for a year or two, then just stopped working.

  I can't connect via the usb port.

  So I tried to connect to two different routers. same result.

  Any suggestions?

  (I read that there is some kind of reset I can do, but to the person, the person of HP sent the news by message.)

  That's what I see:

  

  Hi kirby88,

  Thank you for your answer!

  Yes I think there is a problem with the hardware with the printer. Do not honestly know what options would be for the hardware, you need to Contact HP telephone support for your hardware options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector. As it seems to be a problem with the hardware of the printer itself.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that answers your questions!

• How to change the power supply to the CD/DVD drive so that it is disabled by default?

  When running on battery I often use the icon 'Remove hardware safely' XP to 'unplug' the carpet * CD/DVD drive for Safe some battery life. (Does?) I use Fn + Tab to bring back to life. I wonder if there is a way to make my boot Notebook (M400) with the power supply to the reader off by default. Moreover, any idea where I can find the extra battery for the slot of the CD/DVD player and who the price?

  Thanks in advance for your help.

  Hello, Robert

  If you see the start page, you will see that this support forum is not a type of support Toshiba directly but forum users. But you're not alone and many users expect that a Toshiba support team sit in the office and before writing the answers.

  In any case, there are many users of Toshiba laptops with very good knowledge and also amateurs who are trying to help the other guys in different problems and also to share own experience.

  Professionalism is not the forum but action when you need help because of physical damage or something similar. If you need assistance and competent answers each authorized partner must be able to provide the info you need. But please don t mixture and Toshiba service partner because it is not the same.

  In any case, I found the info you can use additional (second battery expansion) and it takes batteries with PA3510U-1BAL, PA3510U-1BRL room numbers. I can't tell you how much it costs, but you will find only using Google.

  Back to your first question: if I understand you just want to save more power and because of this, you want to sign out ODD. It's a nice idea, but you have clearly misunderstood something. "Safely Remove Hardware option is there to help the operating system and and say this material, a part will be removed and don t exist anymore, but it does not physically the disconnection of any other material."

  If you need more power use a second battery and enjoy your life.

  If you have any other questions you are welcome. A lot of users here M400 and I hope in the future that some of them will participate in a little more.

  Good day! :)