VDI on VSAN: disconnected Replica (bow down)

Similar Questions

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• Just installed MS Security essentials and I'm getting a repeat look like I just disconnected a perephrial device. "DA-DA da da."

  The title says it all. I tried disconecting all my USB connected devices and it still makes noise. I don't have an idea of what connects and disconecting. An update: use CPU/task manager / when I hear the .wav connect my CPU usage goes up to 19%/when I hear the .wav disconnection it comes down to 1%. I went to the event viewer and looked at the system logs to see if something jumped out of home but there is so much information in there I found myself just looking at random with no response. I'm running Vista 64 with a intel i7 920. I've updated my chipset graphic driver/pilot and uninstalled/reinstalled MSSE. Still hear the disconnection reconnection .wav, happening every 15 seconds or so, even when all of my USB devices are disconnected. Vista is updated as well.

  Day two: I've updated everything. Now the ba-bonk noise can't randomly. Whenever I close a window, for example. I think it's a problem of windows Explorer. Guru of the rainforest

  So I'm busy and did not do a good job of troubleshooting of what exactly the fixed proccedure. It's there were three or four shots from me then to a re start and the noise stopped. So I'm not sure exactly at what stage did. Thank you very much for your support and your skills.

  Just a note of humility to me... The noise ceased, but the device plugged into the wave began to activate whenever I closed a window. What the hell I said. Train repeatedly closing and on the files of two waves (this kind of made me mad, I know I know just turn down the volume.) I must have inadvertently selected the sound bustled when I closed a window. Scrolling mouse operator error.

  Thank you for your help,

  Rangertech rainforest Guru

• When I try to change my password, sign hangs up. Then I can't disconnect.

  I use Windows 7 Home Premium as administrator. When I try to delete or change my password in user accounts in Control Panel, user accounts becomes "unresponsive." Then I try to disconnect or shut down, Windows 7 can not disconnect. There's just there. In order to stop, I need to remove the battery from the laptop.

  Help, please.

  What happens when you do this?

  1 log in under an administrator account.

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".

  6. type the following command and press ENTER:
  NET user "user %%nom" 123456
  (to set your password to 123456)

• unauthorized replacement screen

  Hello

  I have recently had to have the screen on my 6 + replaced by an unauthorized repair. I'm in the mountains and half a day or more, to the nearest authorized repairman. I am aware of the error 53.

  If I now the unauthorized screen replaced by Apple, which will prevent error 53 when I update the OS?

  Anyone done this or know what would happen? I don't want to spend even more money and still get brick.

  JAMWA

  According to the majority opinion here, Apple will punish you for your transgression not to bow down before the gods of Apple - allegedly they will refuse absolutely all do everything that repairs on your device.

• Have to restore the ipod after downloading the update. Question, help please

  Hello!

  I have a large music library on my iTunes and so all my music does not fit on my iPod Classic 160 GB, which is fine.

  I have the latest version (last one that came out) the iPod Classic 160 gb.

  I have the latest version of iTunes.

  I use Windows 7.

  So basically I had no questions for recent years until last week.

  For a long time, I went through my collection of music [in view of SONGS] and placed check marks next to all the songs I want on my ipod.

  It's the way I like it. I have enough free space on my ipod for new music, I get every month so that it works.

  I connect the iPod to iTunes and SYNC my library, and it adds new songs I added to my iTunes library since I'm finally connected.

  Okay - here is the problem.

  Last week, when I connected my iPod Classic to iTunes, I got a saying there was an update to download.

  I am used to what is going on all the time with my iPhone, but I can't remember the last time there was an update for my iPod.

  Intrigued and not think what awkward or troublesome would come from him, I'm agree to download and install the new update.

  When he did download it says that it does not recognize the device (iPod). After searching for hours for help, I finally disconnected, stop, restart and rec-connected my iPod to iTunes.

  He says that he has no music on my iPod. I checked and it was not. He disappeared. ***!?!

  Fortunately, all my music was always in iTunes so I went with my library SYNC (again, I have the titles I want selected already). He said he could only and basically the only option was to reset my iPod to its factory settings. Because the way that my iPod is empty anyway, I thought, fine, so I did. I have restored its original settings.

  Later, I did the same thing after disconnecting. Shut down, restart, clean the cache and the registry, etc and then reconnected the iPod to iTunes. My first thought was maybe I should try to download the update again - since the ipod is empty at this time - what the *, why not - I would rather finish now than get my music on my iPod to be prompted to download new update, and start all over. So I clicked Check For Updates when my iPod was connected to iTunes and it said there is no new update. I don't remember the exact update, but I'm sure it was like 2.05 something, and what I have now (and had before all this happened) was 2.04 or something like that. So does well, no update? No matter what. At this point, I'm SO frustrated - I want just to SYNC my library via checked/selected songs and get back them on my iPod.

  When I went to SYNC, nothing happened.

  So I went to the tab that showed the music and it only gives me the option to SYNC my library of ENSEMBLE music (which is too large and does not fit on my iPod) - OR - I can go through this form on this page and browse and select the ARTISTS that I would like to add.

  It's so frustrating. First of all, I don't want to pass by and re - select all the songs I want to add - the main reason being - he did already - when you click on my library and select the songs view, you can see all the songs that I previously have selected/checked remains unchanged. Second, if I had to do it the way he wants me to all simply by selecting ARTISTS who will not work.

  Sorry for this long crazy question - but basically - how now factory - reset iPod Classic for SYNCING with my iTunes library with the songs of checked/selected, I already have checked - and not to go through and do it by limiting my will and have to select only the artist (not to mention that I did as I want).

  I appreciate any help or insight that someone could offer.

  Much appreciated!

  On the settings screen of the iPod summary (what you see in iTunes when you select iPod), there is a checkbox to Sync only checked songs and videos (wording may be different for your iPod).  Enable (check) this setting in combination with sync entire music library.

• Any equipment option in the start menu on Tecra A8

  I have a new Tecra A8 which is awesome. I have a docking station for which I have connected to a screen more grand, printer and al. What I don't have is a fitting option in my Start menu. I log off and closed, but no way to disconnect without shutting down my system. When I place the laptop in docking station I have to reset my graphics options every time which is a little annoying. Are there any drivers or anything else I need to download?

  Thank you.

  Hello John

  Nice to hear that Tecra A8 is awesome! I use Tecra laptops for my business and I think Tecra A8 will be my next unit.

  Back to your question: I hope you use your Tecra with last AdvPortRepIII +. Each Toshiba laptop with a capacity preinstalled tool called Toshiba Mobile Extension (I also on my older Tecra M2). When the laptop is on docking station near Log off and closed the buttons, there should be also Undock button of the computer that allows hot or warm connection and optional docking device disconnection.

  Please check in Control Panel if you can find Toshiba Mobile Extension tool. The same shortcut, you can also find in Toshiba Assist Utility tab OPTIMIZES. This utility allows you to select which device to default view that you want to use when Tecra is docked.

  As I said Toshiba Mobile Extension must be preinstalled. Do you use factory settings or your own installation of the OS?

  Good bye

• Flex T400 keyboard

  I have a T400 bought last September and is of type machine 2764. The keyboard is extremely flexy, bowing down, even with slight pressure. It seems that I received a first generation without scaffolding extra keyboard model. I sent the laptop to EasyServ twice to get the keyboard is stiff, but the problem has not been resolved at all. I plan to install additional bracing myself, so anyone know how I can support additional keyboard?

  Thank you.

  just get a T61 type keyboard, call in the warranty Department and ask them to send a T61 keyboard.

• Photosmart 7760: restrict the rows included with normal printing

  I cleaned cartarages, calibrated printed page and test page. The colors are great. Prints all documents, but added random horizontal lines close interval about 1 centimeter on paper. At the end of the text, the lines bow down and then make a vertical line. My computer is Windows XP and my laptop is Windows 8. I've only used the windows 8 during about six months. It has always worked fine until 4 days ago. Help, thanks!

  Catfez

  Hello @catfez,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of quality of white lines that you encounter during your computers print to your HP Photosmart 7760 Photo Printer today. Thank you for all the troubleshooting steps you have already tried before reaching out for support. The white lines are usually caused by a clogged nozzle of ink on one or all of your cartridges. Or, this issue may be caused by a bite of the contacts in the cradle of the cartridge inside the printer you. To solve this problem please can I you follow the steps below.

  To start can I please have you click on here. Once the support document opens please do run the steps listed to make sure that your cartridges and cradle are clean in your printer. I understand that you already ran a cleaning before reaching out for support; However, cleaning in the Toolbox of HP printer may need to be tested up to three times to resolution. For further instructions on how to manually clean your cartridge one cartridge cradle please click here.

  Once the troubleshooting is complete please test print to see if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Internittent print, job hangs in the symptoms of Q, Officejet Pro 8500 A910, on 2 pc's Win.

  Hiya. Win 7 on 2 machines (all updates applied), WiFi, Avast running, Defender disabled, to update the latest firmware and drivers (both PC), HP print and scan sometimes Dr. said everything is good. But if there is a hung job in Q it is said "issues addressed" with no details and yet nothing changes (work still in Q). If I unplug the printer and turn off the PC and then launch printer, then start PC it prints a few jobs then stops them from the Q to the printer. Jobs will be based in the Q indefinitely.

  When a work is hung in Q the printer displays the Red 'X'. By pressing the 'X' and turning off the job at the printer do not help, the next task remains in Q.

  All the thoughts I have send the printer to fish?

  Thank you, Dana

  Heya 8lives,

  BATCH FILES!

  I bow down you good gentlemen/ladies. And here I thought that the batch files were dead... ahhh... my tongue (said of my age and BONE).

  Anyway... with minor mods (path), the clearing of the Q did the trick I could open and watch as the two jumped in, and then the q files.

  I'll always keep an eye out for anything that may have caused the Q to keep the files in the 1st place, but the command quickie file is worth its weight in gold.

  Thanks to you all!

• Problem with the information in the audio codecs

  Some of my mp3s have no tagged album art and information in correctly. That's why the sansa fuze does not display an mp3 information. Can someone suggest me a free software to mark up information in mp3s please?

  Thank you

  SR

  The most popular program around this forum seems to be MP3Tag.  To do this, that you probably want to do.

  Website of mp3Tag

  I use on occasion and works quite well.  Some on the forum almost bowing down to the feet of the developer... I'm not quite in that camp.  Personally, I use another program of marking, but it is not free.

• Color LaserJet CP1025nw - light of Attention on

  Hello! I hope someone can help with a preview on a printer problem, I have.

  Here goes...

  It of almost 1 year out of the box and has stopped working. When I turn it on, the amber attention LED flashes and stays on. The Green led also lights up. When I try to print a Setup page a window pops up saying: "Unable to establish two-way communication with the device." It is plugged in and that the power cords and usb are intact.

  There is no jam that I can see. I can't turn the cartridges to see if there is anything wrong or to replace them, even if that was the case.

  I feel like it happened after I installed the update of the firmware.

  I'm on mac os 10.5.8

  What I tried:

  • Shooting printer / disconnecting operations 'x' down for 30 seconds before turning back on

  • Uninstall and then reinstall the driver from the floppy disk supplied in the package

  • Uninstall and then reinstall the latest drivers downloaded from HP

  • Reset the system preferences print system

  • It scream

  Any help would be greatly appreciated. Thank you!

  I'm sorry to hear that.  I have this lift to the right people.  You should hear from them before, for a long time.

• Speakers Logitech Z313 stopped working after upgrading to Windows 7

  I delayed upgrading to Windows 7 until after I graduated from College just for this reason. I just installed Windows 7 and my Logitech Z313 speakers that worked perfectly well in Windows XP are not recognized as material.

  There is no yellow! device drivers, I have the "High Def Audio" largest later device driver installed. Troubleshooting Windows does not detect a problem with anything. My speakers are working properly. When I disconnect or shut down the PC, I can hear the feedback and the pop Logitech has no drivers for these speakers because they must be detected automatically by the system when they are connected. I tried unplugging / plugging in different ways.

  Can anyone help?

  Thank you.

  Hello

  I quite had the same problem and found the solution: you must uninstall your device, then go to control-online Device Manager Panel => are looking for the "!" symbol on your list, then right click on 'properties' and 'details', you will see a list with weird names (ex: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_18497662)

  Copy it and go to , paste it into the search bar, and then select your 'Windows' (for me it was 10 Win 64-bit), download the driver and install it. Fact! :-)

  Problem solved ^^ not by Microsoft or Logitech, unable to understand this problem, caused by the update of Windows 10... (-_-(

• Freezes and the laptop HP 8460p not close

  When to stop the laptop, it disconnects, displays "sutting down" and freezes at this moment, and remains so.

  Must press off for 5 seconds, stop the laptop. After the restart of a message is displayed, which

  There or closes normally, give the choice to the safe mode or normal boot. Normal usage starts the laptop starts normally and works fine. Next time I stop it may close normally, but about 50% of the time he does. I use Windows 7 Pro 32-bit.

  I downloaded and installed, but seems not to do anything and I can not find the diagnostic tool

• a message appears when I stop computer told me not to turn off or unplug your computer because the 1-3 updates were being installed. How can I get rid of this message?

  HP pavilion p6716f desktop-b;

  r

  internet Explorer Windows 7

  I turned my computer off every night. As soon as I hit the start button to shut up, a message appears telling me not to disconnect or shut down as 1-3 (sometimes more) updates are being installed. I have to wait until they are installed before I can finish closing.  I get muy updates aujtomatically. I would like know how to stop this message.  Thank you.

  You stop this msg by reviewing windows update settings and select it to inform, and then you choose your own time to install.

  However if this msg appears that often, you should review the history update windows to asertain what updates fail, you then have to fix this problem