VDI Session disconnects when you connect to the VPN

Similar Questions

• Windows Server 2012 R2 Remote Desktop Server - user session crashes when you connect to the wide

  From time to time, a user session hangs during registration out of the Windows 2012 RDS.

  This has happened for two different users. Whenever the session hangs with the message "signature" and the user can not log such as they appear with the same message by.

  I connected to the RDS as administrator, checked the Task Manager and found that an office application always work, such as Excel.

  When I complete the process of the office application and disconnect the user through the Task Manager, the user can log in again.

  I reinstalled the desktop software and still happens from time to time...

  Any suggestions?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet.

  When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet. I have a VPN connection and it works but not navigation parallel to the point where the VPN works.

  Someone suggested this fix >

  Make sure that the default route has NOT changed to the VPN server.

  Open the properties of your VPN connection.

  Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".

  Disable the feature from default gateway.

  but when I do that so I'm not able to access our data HTML site that requires the use of VPN.

  Any help is appreciated

  This article describes what you see...

  http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  .. .and possible solutions...

  I suggest you post this question in the TechNet Windows 7 IT Pro networking forum can help...

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• I use only 20 MB when you connect to the 802. 11A

  Hello

  I test aironet 1130ag with the wlc 2106 in my test environment

  When I connect to the 802. 11 a or g, I can get max speed 20 MB and not 54 MB

  What is worng and what should I check?

  Here is the basic configuration of the 802. 11A

  network 802. 11A... Activated
  11nSupport... Activated
  802. 11A of low band... Activated
  802. 11A mi band... Activated
  802 11A high band... Activated
  802. 11A operational rates
  802. 11 a 6 M rate... Mandatory
  802. 11-9 M rate... Support
  802. 11 a 12 M rate... Mandatory
  802. 11-18 M rate... Support
  802. 11-24 M rate... Mandatory
  802. 11A rate of 36 M... Support
  802. 11A rate 48 M... Support
  802. 11-54 M rate... Mandatory

  Beacon interval... 100
  CF Pollable mandatory... People with disabilities
  CF poll request mandatory... People with disabilities
  CFP Period....................................... 4
  Maximum duration of CFP... 60
  Default channel... 36
  Default Tx power level... 1
  DTPC status... Activated
  Fragmentation threshold... 2346
  Long retry limit... 4
  Lifetime maximum Rx... 512
  Service life of Max Tx MSDU... 512
  Medium limit of occupation... 100
  Pico-cell status... People with disabilities
  State of the Pico - cell - V2... People with disabilities
  RTS threshold... 2347
  Short retry limit... 7
  Threshold of TI-50
  State of the metric traffic flow... People with disabilities
  State of the accelerated application of BW... People with disabilities
  Profile EDCA type... by default-wmm

  Thank you

  When you say that you get only 20 MB do you want to say is that your data rate or throughput of your true?  If this is the true throughput which is right.  Remember that 802.11 is a technology of half duplex.  Half duplex and the management fee a client that connects to 54 Mbps can have a flow in fact up to 22Mbps

• C6380 wireless at home not seen when I connect to the VPN from the company

  I have a HP C6380 wireless printer which works fine when I'm not connected to the VPN to my company.  I have a WRT54GS of LYNKSYS router.

  When I activate my VPN connection via laptop computer Windows XP, the printer's connection is lost.

  How can I fix?

  You can not fix it.  It is the nature of the VPN to disconnect all devices like printer LAN (and file sharing with other computers besides).

  The only recourse is to use USB directly connected between the printer and the computer when VPN.  The good news is that the printer is OK with having wireless and live USB connections at the same time.

• Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

  Original title: wireless computer does not work when plugged in and load, why?

  have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

  
  

  The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.
  The device information:

  > Ze2000 HP (Pavilion series)
  > Original OS: Windows XP Home Edition
  > RAM: 512 MB
  > 100 GB hard drive
  > AMD Turion 64 Mobile Technology ML-34
  ___________________________________________________________________________________________________
  I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

  Hello

  I appreciate your efforts to solve the problem.

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Are you having the same problem when you use the configuration of a network connection?

  I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

  Method 1:
  I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type Device Manager in the box start the search .

  b. open the Device Manager and expand network adapter.

  c. right-click on the network driver and click Properties.

  d. click the power management tab.

  e. uncheck all options.

  f. click OKand then click OK again.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  
  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

   

• LAN disconnects when you connect to PPTP session

  IAM trying to connect to the server thro PPTP client.

  While the PPTP session connect my LAN services disconnets.

  Is there no workaround solution to use both simultaneously.

  Hello.

  Inside the 'Advanced Options TCP IP', of the PPTP connection to the MS (on the client), you can find a possibility to disable the default routing via the PPTP connection. The option called "Use the default for the remote network gateway". If disabled should not be all in composition.

  Did she help?

  Beautiful day Patrik

• When you connect in the apple store, I get an unknown error, please help?

  Hello

  I had an apple for a long time but ID that you have not used for some time, well now I'm opening a session @ my work on my old apple ID in the apple store, I need to download anything to unzip the .rar files and I need to download it from the apple store for security reasons... so I have to log my account but I get an "unknown error". , no idea of what happens, maybe someone knows what I need to do?

  FYI, I've never connected to a mac with this apple ID, just the iphone, don't know if that counts in all but yes... Thank you!

  MAG ook in I eigen taal.

  A little more information please:

  What device (mac, phone, plate or what)

  what OS

  you are in the same country when the Apple ID was made?

  Note: for mac and the best is "The Unarchiver" in the Appstore, free.

  Lex

• PCOIP disconnects when you connect with SCCM 2012

  We have two servers view 5.2.0 our handling connections. The machines have 5.2.0 Agent and the client is 5.3.0. We just migrate all our users on these new servers and decided to use pcoip as it is by default, but now, when we use SCCM 2012 to support our users as soon as we can connect with the remote, it disconnects the user. When the user connects with RDP we don't have any problems. Is this a limitation with PCOIP?

  Teradici come back to me. Unfortunately currently the only way to shadow users desktop is to use vSphere. With a variety of physical and virtual machines, it is not possible to use two different solutions.

  http://TechSupport.Teradici.com/ICS/support/kbAnswer.asp?deptID=15164&task=knowledge&questionID=1239

  See above for how to do if you wish.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• When you connect to the internet error code 678 appears. What can I do to fix this?

  I get the error code 678 when trying to connect to the internet.

  With the help of a new modem D-Link DSL provided for me by my new extreme DSL service provider.

  Have Windows XP Professional installed on my machine.

  I downloaded the updated drivers for my network n-force Nvidia card.

  When I try to connect to the internet, I receive error 678 and cannot connect code.

  A run scans regularly for any virus or malware, with none detected using Norton 360.
  In addition to performing other troubleshooting code error 678.
  How can I fix this error 678?
    
  Hello
  You can check this link:
  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/892889

• Pop Up window which appears when you connect to the computer

  I made an update of windows Monday, 7-6 and now get the following message when I connect to my computer.  When you try to close the popups they keep reappearing. Any idea on what it's for or how to fix?

  The feature you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below. ""  Another box pops up saying please wait while windows configures the status. Then another box appears saying that cannot find an installation package for the product. Try the installation again using a valid copy of the installation package "status.msi".

  SOLUTION: Download this file:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-69585-1&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=391182

  Extract the .exe

  go to this folder:
  slp_dd_hathi_110_017\setup\status\

  tap the status.msi. Steve

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the IP host address list when you connect in the vSphere client?

  Is it possible to edit the list of hosts/ip I get when connecting in the vSphere client?

  

  Thank you!

  As far as I know it is possible by editing the registry. The key you are looking for is HKEY_CURRENT_USER\Software\VMware\VMware Infrastructure Client\Preferences\RecentConnections

  André