VDS together-NIC

Similar Questions

• Remove the vDS Teddy

  Hello

  I wonder what will happen to any VM that use a certain bear if a vDS when NIC is removed a vDS or disconnected from the server? How long do it take for vCenter to realize that something has happened and it migrates the virtual machine to an another Teddy?

  I can't find any official information in this respect and I am not able to test it at the moment

  Thanks for any help.

  -Very well and I went to test it. With an active SSH session to a single host with esxtop (network), I removed one (of the 3) NIC of the vDS. Instantly, the virtual machine that were on this NETWORK adapter was moved to another. I had a continuous ping running on those virtual machines before you make the change and not even an ICMP request exceeded (so if the connection dropped out, it's for less than 1 second). The physical switch (a Cisco in this case) also updated its CAM table instantly, although as has been pointed out by Richardson, which may depend on the hardware/network configuration.

  Thanks for all your replies.

• Substitute a port of Dvs group strategy

  For the life of me I can't understand this point, otherwise I'm just completely missing it in the UI (web client). I put a deposit on a group of ports for uplink "grouping" allowed. I have * taken * this meant that I could change my order of uplink for this group of ports on a host unique, different from all other hosts, because the substitution would allow me too.

  Now, assuming that my thinking is correct, I have no idea where I can change the order of uplink on the specific host. Am I missing something? Thank you!

  Unless I missed something, you cannot set a different configuration of grouping by host based since you are using vDS... substitution option that you authorized, means that you can have a different policy of consolidation of the vDS together, but not for a specific host.

  If you use vSwitch Standard you can do another political collection for each Port Groud and host, but don't not using vDS.

• Multi-NIC vMotion in vDS

  In the article, 2 exchanges are configured with NIC 1 as asset and NIC 2 as before in the first portgoup and the reverse in the second portgroup.  How would that be different from setting up a single portgroup and adding NIC 1 and NIC 2 as active adapters?   What are the advantages and disadvantages of each approach?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007467

  Note: I moved this question on the forum of vMotion.

  Hi greenpride32

  This ensures that the vmkernel ports are active on the two uplinks by forcing active configurations / Eve.

  Otherwise, there is a chance that two vmkernel ports could choose the same uplink, eliminating the advantage of having 2 vMotion vmkernel ports.

• vmk0 behind a together group of NIC

  I have a temporary need to do this, the network adapters are configured as an LACP trunk on the procurve and the vSwitch has NIC Teaming the value:

  Load Balancing-road based on IP Hash

  State of the failover detection-Link network only

  Notify the switches-Yes

  Restoration-Yes

  But shortly after that I loose connectivity and ILO will need to connect to the consoel where I notice the setting management of NICs is bound to a single network adapter which I assume may not work as the procurve switch has all the configuration of ports in an LACP trunk?

  Any ideas?

  Thank you

  Hello

  LACP is supported only (so far) on the implementation of the distributed switch from Cisco (Nexus 1000 V). http://VMware.com/files/PDF/technology/cisco_vmware_virtualizing_the_datacenter.PDF

  So better is to simply configure trunking VLAN on natachasery all connected and to install across all load balancing the natachasery. If you have enough natachasery, consider booking two natachasery and connect them to a group of ports separate vSwitch or dvSwitch for traffic management and VMotion and put them in a team of recovery.

  Hope that helps.

  Best regards, Ronald.

  If you enjoy my reviews, consider awarding points for a Correct or useful response. Thank you!

• Migrate standard network switch to VDS

  Hello

  I intend to migrate little my clusters that are running in a standard switch to DVS. Need help to automate this process.

  My scenario is:

  In a 15cluster environment are present 5 are already running in DVS
  but 10 clusters are still a standard switch so I need to migrate the
  already existing DVSwitch.

  By taking a cluster of 10node as an example.
  (1) mgmt and vmkernel are on a vswitch (ex: vswitch 0)
  [vswitch 0 - connected with 2 vmincs]

  (2) virtual machine in a vswitch portgroup (Ex: vswitch 1)
  [vswitch 1 - connected with 2 vmincs]

  On all groups, we need to migrate only machine virtual portgroup
  or vmnetwork (ex: vswitch 1) to off-network vmkernel mgmt DVs.
  My plan:
  First add all cluster hosts to DVswitch
  Remove all a redundant vmnic (ex: vmnic3) connected to the machine virtual portgroup. (Ex: vswitch) 1 and adds it to DVswitch.
  Now migrate all virtual machines connected to a standard switch to dvs. (Here I hit)
  Is it possible if VLAN 10 (standard switch) then consists of 5 virtual machines
  check the VLAN 10 DVS and portgroup network set to 10 VLAN adapter on the
  SMV (I mean can we compare VLAN ID on VSS and VDS and inspiring than us)
  need to migrate virtual machines to a DVS.)

  As below:

  

  
  If it works correctly then you have to check the State of all virtual machines (ignore power VM off) ping
  If ok then proceed to map the second network card (ex: vmnic4) VSS for VDS.

  Use the Script:

  # ESXi hosts to migrate from VSS to VDS
  $vmhost_array = @("host1","host2")
  # Adding Hosts to existing VDswitch
  $vds = Get-VDSwitch -Name "SM_UAT"
  foreach ($vmhost in $vmhost_array) {
  # Add ESXi host to VDS
  Write-Host "Adding" $vmhost "to" $vds_name
  $vds | Add-VDSwitchVMHost -VMHost $vmhost | Out-Null
  # Migrate pNICs to VDS
  Write-Host "Adding vmnic2 to" $vds
  $vmhostNetworkAdapter = Get-VMHost $vmhost |Get-VirtualSwitch -Name "vswitch1" |select -ExpandProperty Nic |select -First 1
  $vds | Add-VDSwitchPhysicalNetworkAdapter -VMHostNetworkAdapter $vmhostNetworkAdapter -Confirm:$false
  # Migrate VMs from VSS to VDS
  Write-Host "migrating vms from VSS to VDS"
  }
  
  
  
  
  
  
  
  
  
  
  

  
  

  Maybe try like this

  # ESXi hosts to migrate VSS to VDS

  $vmhost_array = get-VMHost-name 10.50.37.31

  # get existing VDswitch

  $vds = get-VDSwitch-name "Pre-production".

  foreach ($vmhost to $vmhost_array)

  {

  # Add ESXi hosts service VDS

  Write-Host-object 'Add' $vmhost 'to' $vds

  $null = $vds |

  Add-VDSwitchVMHost - VMHost $vmhost

  # Natachasery to VDS migration

  Write-Host-object «first extraction vnic connected to vswitch»

  $vmhostNetworkAdapter = get-VMHost $vmhost |

  Get-VirtualSwitch-name "vswitch1 |

  Select-Object - ExpandProperty Nic |

  Select-Object - 1 first

  Write-Host-object "Removing vswitch vnic.

  $vmhost |

  Get-VMHostNetworkAdapter-name $vmhostNetworkAdapter |

  Delete-VirtualSwitchPhysicalNetworkAdapter-confirm: $false

  Write-Host-Object "RΘcupΦre removed vnic in a variable.

  $Phnic = $vmst | Get-VMHostNetworkAdapter-physics - name $vmhostNetworkAdapter

  Write-Host-object "adding vmnic (redundant) to ' $vds

  Add-VDSwitchPhysicalNetworkAdapter - DistributedSwitch $vds - VMHostPhysicalNic $Phnic - confirm: $false

  # Migrate virtual machines from VSS for VDS

  Write-Host-Object «RΘcupΦre virtualPortgroup vswitch info»

  $vssPG1 = $vmhost | Get-VirtualPortGroup - VirtualSwitch "vswitch1.

  Write-Host-object "migration of VSS for VDS vms."

  foreach ($vssPG to $vssPG1)

  {

  $dvsPG = $vds |

  Get-VDPortgroup |

  Where-Object - FilterScript {}

  $_. ExtensionData.Config.DefaultPortConfig.Vlan.VlanId - eq $vssPG.VlanId

  }

  $vmhost |

  Get - VM |

  Get-NetworkAdapter |

  Where-Object - FilterScript {}

  $_.NetworkName - eq $vssPG.Name

  } | Together-NetworkAdapter NetworkName - $dvsPG.Name - confirm: $false

  }

• migration of virtual machines from vss to vds

  I need to spend all my machines virtual vss a vds

  Basically, all virtual machines are on vswitch3

  I need to move them to dvs3

  I need to move network cards, the vss and vds have already available NIC so I just need to loop if the virtual machines per host and change the portgroup

  So, I have something like this...

  $vss_vlan50

  $vss_vlan60

  $vss = vswitch3

  $dvs = dvs3

  $vmhost_array = @(«host1, host2, host3")

  $vms_vss_vlan50 = get-VMHost $vmhost_array | Get-VirtualSwitch-name $vss | Get-VirtualPortGroup-name $vss_vlan50 | Get - VM

  {foreach ($vm to $vms_vss_vlan50)

  Get-NetworkAdapter $vm | %{

  $_ | Together-NetworkAdapter - PortGroup $dvs - confirm: $false

  }

  }

  Is there a better way to do it? I have to make a loop for each portgroup? I have tons of exchanges

  Thank you

  You can try it like that?

  $vss_vlan50

  $vss_vlan60

  $vss = vswitch3

  $dvs = dvs3

  $vmhost_array = @(«host1, host2, host3')

  Get-VMHost $vmhost_array |

  Get-VirtualSwitch-name $vss |

  Get-VirtualPortGroup-name $vss_vlan50 |

  Get - VM | Get-NetworkAdapter | Together-NetworkAdapter - Portgroup $dvs - confirm: $false

• Compaq Presario F700 laptop - replacement of Ethernet (NIC)

  Hi all!

  I have recently switched to my laptop to XP. I had the hardest time finding drivers for the LAN.  So I finally found them and now the connection is always limited or no connectivity when connected via ethernet.

  I tried to release and renew the IP address, but the system is unable to renew it through CMD.  My internet works fine with my other two computers.  I used the same ethernet cable connected to this computer to my laptop and they are all lead to limited connectivity or not.

  I think that the NETWORK card must be replaced, but I can't find the replacement part number.  I don't see the number for the WLAN.  Could this be the same room?  I don't think so, because the wireless is fine, it's just the connection to the LAN which I seem to have a problem with.  I see not even where I can access the bottom of the laptop ethernet card.

  I received the spare part of this thread - http://h30434.www3.hp.com/t5/Notebook-Hardware/Compaq-Presario-F700-Laptop-NIC-Replacement/td-p/1639...

  Anyone know what part I need to replace the LAN ethernet, not wifi adapter?  (unless they are the same, want to make sure before order).

  Thank you!

  Hello:

  To replace the ethernet card, you will need to replace the motherboard together.

  The link you mentioned (which I answered the way back when), was to replace the wireless network card.

  I recommend that you just buy an adapter USB to RJ-45 ethernet until you buy a new PC.

  If your laptop has an amd processor, XP driver you should use.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42431-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 3224052 & sw_lang =

• Can I search the current way together in a script?

  On my machine, I have a folder full of functions and commands mathscript.  This record starts to become very large, and I wish I could clean it up a bit by combining the files in the subfolders.  For example, I would like to create the following folders;

  C:\MatrixXTools

  C:\MatrixXTools\StringTools

  C:\MatrixXTools\VariableTools

  Of course, it would be nice if I had to define the path to each file individually.  What I want to do, is to set my path manually for C:\MatrixXTools and then put a command here called "import".  The 'import' command would be responsible for the research of the current path for a file and then add it to the path when he finds it. So to import the StringTools, I just call

  Import "StringTools.

  All my scripts base would go into C:/MatrixXTools and then if a script is required to use the StringTools, I could just call import feature.

  The problem I have is that I can't find a command that turn the path into a string vector.  Is it possible to do?  'SHOW the WAY' is not what I want it because it is just to show the way and does not give me a way of viewing by program.

  Is there a better method to get all subfolders together?

  I realize that I could also do this by using the startup script, but I (svn) version control tools so that other people can use them - I don't want to have to return everyone to change their startup script every time I do a new folder - I should be able to do this in scripts.

  Note: we are still on v62.2 and we are looking in the options of upgrade.

  You can get the path to show output in a string using = operator.

  [showPathStr,] = show the path;

  You can break down the showPathStr on the new line characters

  in a vector of string using the split function.

  The split function has been added in MATRIXx 7.1.9. The Division operates internally

  uses index and stringex functions to create the split string vector.

  showPathVector = split ("" n", showPathStr);

  If you try the split function and look at the algorithm that you need to

  Download and eval MATRIXx 7.1.9, or higher.

  Also, instead of change startup.ms each time you add a tools directory, why can't not

  have startup.ms run another script (i.e. execute file = toolsetup.ms) and you

  update only toolsetup.ms when you add a new directory of tools.

• Replace the NIC card

  Is it possible to replace the card Realtek RTL8111E NIC in a PC Touchsmart 520-1000z?

  A Realtek diagnostic program showed the following:

  Status of the link - disconnected

  On a test, loopback MAC, PHY loopback, IRQ, FIFO all failed.  Wake up LAN, enter the IP address, nothing happens.

  I guess that the card is dead.

  It does not appear on the Device Manager.

  Unable to install the drivers.

  Thank you

  Hello Hotbowler,

  I understand your Realtek NIC does not work any longer and you are curious as to whether or not you can replace. Unfortunately, your NETWORK card is integrated and therefore integrated into the motherboard. This would make it impossible to replace without replacing the motherboard together. I got this information from the HP TouchSmart 520 - 1000z product specifications and configurable Options page. It is a replaceable parts in your HP TouchSmart 520-1000 x, unfortunately the NETWORK card is not one of them.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• The use of two different NICs on the RT?

  Hello world... I am currently working on a project where I have to deal with the problem mentioned in the thread topic: I have a PC with LabVIEW RT which must be able to establish network connections using two different network cards. One will be used to connect via TCP/IP to a host computer that will show you the data transmitted through variables shared; the other communicates with another PC via the Modbus Protocol. The key is that each communication is done through a separate network card.

  So far I could not understand how to set up these two things happen. Does anyone know how to do this? Advice will help you.

  For communication of RT, I use a project of RT standard, with the RT PC, given one of the IPs, and for the part of Modbus, I created a server I/O with a master and a slave. Separately, everything works fine, but when I get them together it does not work.

  Thanks for your help!

  Sorry it took me so long to answer, I've been busy lately... I found a solution to this problem that I mentioned, and just in case anyone has similar problems in the future, I will briefly describe what happened.

  Caseyw suggested, he had to allow both NICs through the measurement and Automation Explorer. The cause of the failure of connections was in fact that I was not using the 'right' for Modbus communication, which was rolled out on the secondary card. The solution was to use the URL Protocol with the correct path in the field, addressing the right IP address. To avoid making this post a mixture of subjects, I do more futher, but I got the gist of it, so if someone has similar problems when I work with multiple network cards or Modbus communication protocols, do not hesitate to contact me, I'll be happy to help you.

  Thank you

• Windows Server 2012 R2 4 NIC team LACP

  Good day to all

  I configured a LACP 4 niic bundle on my Server R2 of 2012, all network cards are the same. I set up my 4-port CISCO 6509 as follows

  Interface Port-channel50
  Description * link to Backup Server *.
  switchport
  switchport access vlan 130
  switchport mode access
  end

  All 4 ports are configured in the same way as shown below

  !
  interface GigabitEthernet1/2/27, 03/01/27, 02/02/29, 03/02/29
  Description * BackUp Server 1 *.
  switchport
  switchport access vlan 130
  switchport mode access
  spanning tree portfast edge
  passive mode of channel-group 50
  end

  I have all 4 cards in a single team LACP with hash address as mode. When I plug in cards NETWORK 3 and 4, the machine works as it is on an old earthling in modem 36 600 dial and says "Media disconnected" with the "link"light, but the activity of flashing light. " If I turn off then re-enalbe the NIC led "link" is that they work until I restart. However 4 NIC always gives me

  "Blame LACP negotiation."

  Any ideas on why this is happening, especially the restart and they never seem to initialize, at that time, I have 3 were team together and it seems to work properly, of course, until I restart.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Open manage - can be used on a cluster NIC.

  The subject is a little weird and don't know where to put it, but here's the situation.

  I have a Power edge 515. I have two GB NIC.

  I noticed on my a hostname called idrac-1SNMFP1 DHCP server.  I have never see this before. It was just sort of. I ping and it comes back on the network with an ip address of 10.1.0.55 and his life.

  I searched and found that idrac stands for "integrated dell remote access controller".

  OK, so I'm going on my dell servers and "10.1.0.55 ping - t" on a single computer carefully start cables nw on the servers where I can for a second or two. I see that one of the servers is indeed the IP address.  I can enter the lcd screen and see that this is the ip address of this server maintenance port.

  I have implemented open manage on that server. Here are my questions?

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Hello col288

  col288

  1. why the server called idrac-etc do not appear on my dhcp server before (from what I see in any case.)

  I do not know. I have something suspicious about your environment or configuration has changed.

  col288

  2 - is only changing in the bios of the server ip address. I don't see anywhere to change it in the openmanage software. I have to restart the server to change and I can change the name to something more user-friendly.

  You can change from the iDRAC via CTL E BIOS when starting, via the web interface of iDRAC, or using the racadm within the operating system commands. http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3205.racadm-command-line-interface-for-DRAC.aspx

  col288

  3. why I can't on the server from one IP address. What I mean by that

  If I put in;

  https://Backup2:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  I can get on the server (its called backup2).

  But if I put the IP for example https://10.1.0.55:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This isn't. It is the IP address of maintenance.

  However if I put the IP address of the server that eg https://10.1.0.41:1311/servlet/OMSAStart? mode = omsa & vid = 207122207229892

  This method works.

  Finally

  It is because this IP address is not local to the operating system. Port 1311 is an IPMI communication port to access the iDRAC. You can use any IP address assigned to the operating system, a loopback address or a host name of the system with the designation of port 1311 and should communicate to the iDRAC via IPMI. The 10.1.0.55 address IP is not local to the operating system, so it's off to your network, then he's looking for. IDRAC is not accessible via the port 1311 connections remotely. This port is only available locally. If you use https://10.1.0.55 it should display the web page for the iDRAC.

  col288

  4. the two cards that are in the network server are teamed together to create a single IP 10.1.0.41, they both seem to work.

  Both cards can always be associated BUT have two IP addresses. It causes looks like I 10.1.0.41 and 10.1.0.55 since both of them are able to ping. I thought group put in place two cards so it became a nic but faster, because its two.

  Teaming has nothing to do with it. Collection is managed by the driver and the operating system. It has its own dedicated port iDRAC IP address (10.1.0.55) is on a port shared with one of the LAN on motherboards. If it is shared among the LOM are partitioned so that the bandwidth is dedicated to iDRAC. If you bought the add-on from the company and have iDRAC set dedicated mode then it uses its own network interface. The port of iDRAC has a symbol of a key on it.

  Thank you

• UCSM / VMware vCenter Server dependencies for vDS

  I'm still trying to wrap my head around the differences between the vDS created via UCSM / VMware vCenter integration and the traditional N1K.

  If correctly, the vDS UCSM (1.4) does not require the VSM device which is necessary with the N1K.  And if that is correct, is there any dependency on vCenter?  If vCenter falls down the vDS will continue to operate normally as made them act as the VSM?

  Pete,

  There is a dependency on vCenter, similar to N1kv (software) and UCSM vDS (hardware), applies to both methods of implementation. However, if vCenter goes down the current state of the operation continues. When a change occurs on the virtual machine, that is where should be upward a vCenter race.

  Concerning best practices, I was that it is better to have everything on the vDS for operational reasons. You can then apply and manage the kernal ports in the same case that VM vNIC. QoS, etc... There is a nice documentation on www.cisco.com/go/designzone data Center on this topic.

  HTH

  Thank you

  Eric

• In Media Center, want to play together photos and videos.

  In Media Center, I like the way you create slideshows by simply adding images in the folder.  Why can't I add a small video file to play as well?  With cameras of today in a position to take pictures and videos, it would be nice to be able to combine the two types of files in a folder and make them play together in the show. For example, on vacation I take 200 photos and 50 short videos with my camera.  I then download all these files (photos and videos) in a folder called 'Vacation2013 '.  Then, I want to be able to select this folder in Media Center, they are the piece of photos and videos.

  You can do it in Google's Picasa.

  I know that I can use Movie Maker or some other video editing/creating software to combine photos and videos in a video and then have Media Center play video.  But I don't want to do that.

  Post it here: -.
  http://experts.Windows.com

  This is already one: -.
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114/p/89992/458205.aspx#458205