Venue 11 Throttling pro i5-4300y
Hey people of Dell, it seems the 60 ° C limitation is a bit too aggressive. Is there any plan to increase this to 70 c or better? I'm strangled simple tasks sometimes make... an update of BIOS to increase that would seem in order. Oh, BTW, my 8/256 4300y seems to work perfectly. I know that others have had problems, but this tablet is fantastic. I ordered a pro at the same time, used side by side surface and sent to the back of Surface.
Thanks Doc, I got the update and the fix! You're right, Dell has released a series of updates to the bios but they have a strict low-power issue, and they should avoid the players here. Doc, I read your other post with the mods and I thought I'd share for all noobs, no need to learn the hexadecimal just follow my steps.
And Yes, this removes the limitation.
Download the custom start file bootx64.efi, and then copy it to X:\efi\boot\ and then placed in a USB key.
Then turn off secure in the bios startup
Then start with the USB key, you must be in a mini console. Then at the command prompt, enter the variables you want to change. for example.
grub > setup_var {address} {new value}
The mods.txt will show you the addresses and values to change, IE the address, the value by default, and then on the desired value.
for example
grub > setup_var 0 x 39 0x00
the first is the address, then its default value and the last is the value that you need to take it.
* 0xD0E 0x01 0x00; Power package limit lock
* 0 x 54 0x01 0x00; Platform power lock limit
* 0xD04 0x01 0x00; CFG lock
* 0xD0D 0x01 0x00; Current value RV lock
* 0 x 39 0x00 0x00; Configurable TDP lock
* 0 x 23 0x20 0x10; Shift of activation of TCC
* 0x3A 0x00 0x10; TDP Config lock
These changes are reversible.
Also, you can change the power setting to increase the Turbo max using a program called bar edit. Be sure to first install the tvicport.
When the edit bar locate the address FED159A0 and change all values of 0000000
It it's no limitation more.
PS the Tablet must be fully charged or battery for effect to take place.
links below
www.mediafire.com/.../TVicPortInstall41.exe
www.mediafire.com/.../bootx64.EFI
www.mediafire.com/.../BAR-Edit.exe
www.mediafire.com/.../mods.txt
Tags: Dell Devices
Similar Questions
-
Dell Tablet wireless keyboard does not not with the venue of Dell Pro 8
All,
I bought my wife a venue of Dell Pro 8 for Christmas and the Tablet Dell Wireless Keyboard. The keyboard has been delayed until after Christmas and just arrived, but we will have problems to run. We paired up it and controls volume and brightness keys work fine but if none of the keys work. The Tablet click on w I also nothen you hit but no letters don't appear in the word or the IE address bar.
We have a defective keyboard?
Scott
Hi Lou,
Thank you for taking the time to answer, but as I said, we had no problem of this pairing and some of the keys worked (volume and brightness controls).
I found the solution to the problem which has been updated from the BIOS. It seems that the aircraft delivered in December with the original BIOS A01. We ran a Dell utility provided with the tablet that he upgrade A03, whereupon the wireless keyboard worked fine.
Thanks for trying to help!
Scott
-
Venue 8 5830 Pro upgraded to win 10 Bluetooth keyboard problem
I could put my 5830-10 Windows using Microsoft 'MediaCreationTool '. I, unfortunately, had no room for the update and had to go to the wipe everything and then install Win 10 option. It worked.
Unfortunately, many of the drivers had to be updated and I have been busy doing that, but I have a big problem. When I bought the first of all the coming 8 Pro, I also bought a case with a Bluetooth keyboard. The keyboard worked fine with 8.1. To help to win 10, I've matched both the keyboard and a Bluetooth mouse. The mouse works fine, but even if the keyboard is paired, its strikes are not registered and that I have to use the on-screen keyboard.
I found a post on another site that offers to go into the settings of "accessibility" and disable FilterKeys. Unfortunately, this setting is for the keyboard on the screen and not the Bluetooth keyboard, if it does not work. There seems to be no help in the Bluetooth settings. It shows that the keyboard is paired, but not much else.
I guess I could try another keyboard, but it worked beautifully with 8.1.
Any ideas?
cooverrYes, absolutely... and does not work.
What I understand, Microsoft has changed their Bluetooth Driver in Windows 10 for safety reasons and it's much older BT keyboards with sloppy software does not work in win 10.
In case it helps someone, I finally found the solution to my old Bluetooth keyboard work with Windows 10 on the venue Pro 8.
In the device under Bluetooth-Bluetooth car radio-> properties > Manager there is a tab named 'Power Management'.
The option "allow the computer to turn off this device to save power" is checked by default. I unchecked it and my old Bluetooth keyboard that worked with Windows 8.1 works on Windows 10 once again.
-
Venue 11 5130 Pro 32-bit to 64-bit
Hello
Is it possible to upgrade the Dell coming Pro 11 (5130 32 Bit version) to the 64-bit version by installing the 64-bit version of bios?
And is it possible to update the partition to boot/restore to 8.1 64-bit Windows?
Initially, the 32-bit version was installed due to lack of driver 64 bits for the atom. But now the driver 64 bits are out and I want to go to the 64-bit version.
Thank you
Sorry, but the processor is 64-bit.
The fact that the venue are shipped with Windows 32-bit is only because Intel do not have a drivers for 64-bit Atom when the place out. Now, the drivers are out.
The only limitation is the bios. Another manufacturer lets the user to move to a 64-bit operating system and driver with the same processor.
While it is true that there is a limitation of the hardware on your tablet, its only because Dell wants to limit. Intel has say that this isn't just a limitation of the pilot material.For sure, it was my last Dell hardware. No support, no response to no mail, planned, obsolescence no upgrade possible.
PS: sory for my bad English
-
I continued to see the videos on the way in which noise levels are good on the venue Pro 8 but the audio levels on my device are so low, that I often use using the external speakers (not always possible).
Is there a solution to increase the volume level on the meeting place 8 pro?
I don't have a problem with mine. It is not "Home Theater" volume or quality, but it is definitely strong enough.
If I plug in headphones, it is too hard before reaching the max volume.
-
Venue 11 7140 pro micro HDMI does not work after upgrade windows 10
Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.
I have thus display driver problems on 10 to win.
For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.
The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.
I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.
It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.
-
Venue of Dell Pro 8 on screen keyboard
The keyboard screen on has the distinction of entering characters several times during typing casually. I found another post that also addressed the issue, but which seems to make reference to other issues with the touch screen.
My only complaint is that the entry speed of the onscreen keyboard is so fast that it confuses a general tap as a click long and continues into the character several times. This is similar to hold one key to enter several times.
My problem with my Dell come 8 Pro (32 GB, no 3G), it's that even a brief tap is interpreted as a long. Is there a setting similar to the mouse double clicking speed in windows? Or maybe some setting that limits type a character that one only once per socket (no matter how how long I pressed)?
Windows ease of access Center, make the easy to use keyboard, keys settings filters, maybe?
-
I see that the meeting place 8 Pro has an accelerometer, but no GPS is mentioned. Even small smart phones have GPS. Did the material present in the device, but not used by Dell? I suspect that the material is there, as with HDMI, where the capacity is there at the hardware level, but Dell used it to this unit. Bad luck.
There is no hardware present GPS, in and of itself, but there are what we call 'aGPS."the IP of your computer address aGPS uses closer to where you are, but only with a precision of about two miles. Your best bet is to get a real GPS receiver using Bluetooth (for example, GlobalSat BT - 368i Bluetooth GPS receiver) or USB (for example, GlobalSat ND-100 USB GPS receiver).
-
I fell asleep this week listening to music from game google with the Tablet is plugged.
The next day morning he don't would be not turn on even if the white power light was lit. I left it plugged in and tried again later, took the battery to reinstalled it, tried to power it with the dough, battery, not good. No response whatsoever.
However since the first day after his death, white power led on the Tablet without lights any longer.
The charger seems to be working, it has its own white led lit and it can power other tablets and phones. I used a different charging cable. Still no joy.
If the tablet should be able to work without a battery in if we give good juice?
These power supplies are known to fade? The battery seems to be pretty good considering he is 18 months old, I got another 4-5 hours or more and no warning.
Is that what I can do to prove if it is the battery, the block of POWER or tablet that does not?
see you soon,
C
Hello, CAM,.
I had a similar problem last year that was linked to the charger - I replaced the cord with one that has been the most durable and most able to deliver fresher.
It seems to be some difficulties with the CMOS battery - and what I've been through would say that if power reaches a critical threshold, the standard charger cord doesn't have enough capacity to deliver the load needed to replenish the CMOS 'mostly dead '. I left mine plugged in and turned off for more than 24 hours before the start of this operation once again, even with the more rugged cord.
If your system is still under warranty, let Dell help out - if it's the battery, the work they can do to solve the problem of system can prevent a repetition of what you see now.
-
I5 vPro Dell place Pro 7130 4300Y 8/256 Windows only runs on AC
Hello, I updated the firmware on my place from 11 to a13 and I just noticed that when I unplug it from the socket that it freezes, I've usually run it on the dock while I didn't notice earlier.
When it freezes, the only thing I can do is to press the power button and the screen turns off. If I wait a few seconds and press the power button again the system vibrates and then I can get in the log on screen (it does not ask the bios password so he has not been properly asleep), then I can use it for about 30 seconds before it freezes again (logged in or not). If I plug the sector while the screen is blank, the system works as expected, until I have unplug the unit again.
Here's a trick that worked for me that I posted a few weeks after doing the same exact troubleshooting: http://en.community.dell.com/support-forums/mobile-devices/f/4586/t/19600092
-
Meeting place for Dell 5855 Pro 8 its fluctuating level
The sound from the speaker on my new venue Dell 8 Pro 5855 seems to be up and down randomly. This issue does not affect the built-in loudspeaker, the headphones work fine. I tried to update the drivers, do an image restore factory and various applications, nothing seems to help.
Is this a firmware issue, or is there something wrong with my speakers?
It is running Windows Pro 64-bit 10.It was definitely a hardware problem. I sent it to Dell and they replaced the motherboard.
-
Venue 8 pro update Atom Z3000 crashes system
During the process of downloading the latest chipset update on the Dell Support site, the screen on my coming Pro 8, completely erased and I can't recover. Any suggestions?
My HW: Venue 8 Pro; 5830 chipset
System BIOS: A.14
OPERATING SYSTEM; WIN 10
Update: 5830_Chipset_Driver_14P9K_WN32_603.9600.1000.61123_A06. EXE
Version: 603.9600.1000.61123, A06
mj100
I forgot to mention was unable to turn off the system during the power failure. However, I was able to solve the problem by allowing the battery to empty completely and recharge. The system was able to boot and operating system was available.
-
Hello
I bought an active stylus and a tablet of place 3845 pro 8. The stylus does not work and I can not install any synaptic driver. The 3845 never has a stylus synaptics support as material? There is no sign of any place. No synaptic software not installed, no updates available. is anyone know sth?
Concerning
Unfortunately, the compressed 8 Pro 3845 venue does not support use of active stylus. Only a passive pen can be used.
Kind regards
Adriana
-
Venue Pro 11 (7130): replacement SSD?
Does anyone know if you can replace the SSD in a venue Pro 11 (7130) and if so where you can get them from?
I had the same problem and after searching the internet forums that associated with a SSD for my Dell coming Pro 11 months replacement, I found a solution that works so far as well as the original SanDisk. I bought a 512 GB, Transcend, MTS600 P/N - TS512GMTS600, that I cloned from the factory using Acronis True Image 2014 drive. BTW, the cloning was working after disabling by default enabled encryption file. Hope that it will also be the solution for you.
-
Venue 8 Pro and Vidoe photos at the store on SDHC card instead of the hard disk
Have a coming Pro 8 with 32 GB of storage and want to have pictures and video store on the SDHC card instead of the hard drive. Is this possible and if so, how?
Yes ok... I'm not too much the same. I take not compressed w / my photos so I did not notice the problem. I think I've seen cela somewhere in one of the forums of dv8p. I'll see what I can find if someone beat me to a solution.
Edit to add...
OK, back here... found what could be useful info to the Tablet PC forum, maybe it by wire gives a looksee
http://Forum.TabletPCReview.com/threads/how-do-i-change-where-my-venue-8-Pro-stores-images.61453/
Maybe you are looking for
-
Why iTunes says my iPhone 6 s must be updated to iOS 9.2.1
iTunes says my iPhone 6 s must be updated to iOS 9.2.1 despite the fact that it is already on iOS 9.2.1. Updating the phone software shows that it is up-to-date, yet iTunes seems to think that's not. What should do?
-
Shared folders is disconnected and impossible to reconnect to the drive already in use error letter
I have a XP Pro SP3 with all the recommended updates installed as of 10/02/2011 that sporadically will lose connections to all shared folders on the domain controller Server 2003 SP2. The actions will connect and be accessible on initial login/start
-
OJ4680 AIO: HP solutions Center does not launch
I have been using HP Solution Center 14.0 for many years and now many months on Windows 10. I mainly use it to scan documents. The application has stopped to launch, even if I don't hear a "ding" when I start it. Howevert I have absolutely no disp
-
I get notifications that I have a new message, but after seeing 'new message' when I type, it returns to the home screen and I can't get an overview of messages
-
Must restart to establish a wireless connection on all-in-one printer, HP Photosmart C3180
Description of the problem - unable to connect to the printer, unless you restart printer -Printer HP Photosmart C3180 all-in-One Printer model (Including service pack revision) operating system - Mac OS X 10.6.2 -Wireless connection method Error - c