Ver 7.0 remote VPN PIX

Similar Questions

• Remote access VPN pix version 8.0 (3)

  Hi all

  First of all, I would like to thank to all members of the forum who got help in several messages on the configuration of the pix 515.

  I am now configuring remote VPN access with radius authentication to my network, but I can't connect.

  I use the cisco vpn client 5.0.03.0560, I have also tested my pix radius (inside) server authentication and works very well.

  I already tried to retype the key of the cli, but I still can't remote access vpn to work.

  I also tried to create another remote vpn with another name and local authentication, but I have the same problem.

  I use 8.0 (3) version pix.

  Can someone help me

  I attach the log file of the cisco vpn client to help solve the problem, as well a configuration of the pix folder.

  Thank you very much in advance and I seek prior information.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/configuration/guide/vpnadd.html#wp999516

  [Pls RATE if HELP]

• PIX 515 issuee remote VPN

  Did anyone see anything that would prevent a remote VPN to work? My L2L runs like a champ. I can connect via the remote VPN client end, but I can't talk about anything on the network. I see not the routes appear under my client software under the statistics section. Help!

  domain default.domain.invalid

  activate the password

  passwd

  names of

  interface Ethernet0

  nameif outside

  security-level 0

  IP xxx.xxx.xxx.xxx 255.255.255.248

  !

  interface Ethernet1

  nameif inside

  security-level 100

  address 192.168.3.1 IP 255.255.255.0

  !

  interface Ethernet2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain default.domain.invalid

  90 extended access-list allow ip 192.168.3.0 255.255.255.0 192.168.2.0 255.255.255.0

  access-list 90 extended permit ip any 10.10.10.0 255.255.255.0

  acl_inside list extended access deny tcp 192.168.3.0 255.255.255.0 any eq smtp

  acl_inside of access allowed any ip an extended list

  access-list Split_tunnel_list note SPlit tunnel list

  Standard access list Split_tunnel_list allow a

  local pool YW #vpn 10.10.10.1 - 10.10.10.32 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0-90 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Access-group acl_outside in interface outside

  acl_inside access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 69.57.59.137 1

  Timeout xlate 03:00

  Timeout conn 04:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  the ssh LOCAL console AAA authentication

  AAA authentication LOCAL telnet console

  AAA authentication http LOCAL console

  AAA authentication enable LOCAL console

  LOCAL AAA authentication serial console

  Enable http server

  http 192.168.3.0 255.255.255.0 inside

  Crypto ipsec transform-set strong esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto-map dynamic outside_dyn_map 20 set pfs

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  PFS set 40 crypto dynamic-map outside_dyn_map

  Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA

  Marina 20 crypto card matches the address 90

  card crypto Marina 20 set peer 69.57.51.194

  card crypto Marina 20 set strong transform-set ESP-3DES-MD5 SHA-ESP-3DES

  map Marina 65535-isakmp ipsec crypto dynamic outside_dyn_map

  Marina crypto map interface outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 9

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 20

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 20

  VPN-sessiondb max-session-limit 30

  Telnet 192.168.3.0 255.255.255.0 inside

  Telnet timeout 5

  SSH 69.85.192.0 255.255.192.0 outside

  SSH 67.177.64.0 255.255.255.0 outside

  SSH timeout 5

  SSH version 2

  Console timeout 0

  internal group YW #vpn policy

  YW #vpn group policy attributes

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list Split_tunnel_list

  Group Policy - 69.57.51.194 internal

  attributes of Group Policy - 69.57.51.194

  Protocol-tunnel-VPN IPSec

  admin RqwfSgGaHexJEm4c encrypted privilege 15 password username

  attributes of user admin name

  Group-VPN-YW #vpn strategy

  tunnel-group 69.57.51.194 type ipsec-l2l

  IPSec-attributes tunnel-group 69.57.51.194

  pre-shared-key *.

  tunnel-group YW #vpn type ipsec-ra

  tunnel-group YW #vpn General-attributes

  YW #vpn address pool

  LOCAL authority-server-group

  authorization-server-group (outside LOCAL)

  Group Policy - by default-YW #vpn

  tunnel-group YW #vpn ipsec-attributes

  pre-shared-key *.

  !

  Policy-map global_policy

  class class by default

  Well, your main problem is your definition of correspondence address:

  Marina 20 crypto card matches the address 90

  It is the access list used for the sheep which includes access time S2S and remote, traffic used on correspondence address for the remote access connection, then go ahead and change it to avoid:

  Marina 192.168.3.0 ip access list allow 255.255.255.0 192.168.2.0 255.255.255.0

  No crypto Marina 20 card matches the address 90

  Marina 20 crypto card matches the address Marina

  and the other problem that is not afecting, but is badly configured is your policy of Split tunnel, you set the network as part of the split tunnel which is just as if you did nto have divided the active tunnel (where the reason why road shows 0.0.0.0 on the client)

  Go ahead and change it to be:

  Split_tunnel_list list standard access allowed 192.168.3.0 255.255.255.0

• Site2Site and remote VPN

  I have a site2site between PIX506 and 877 router VPN. Site A has PIX506 and Site B router a in 877. I configured site2site VPN and it worked fine. I also configured remote VPN on PIX 506 so that the remote user can access A site. But when I configure remote VPN on PIX506 site2site VPN works and both sides can ping each other. But site B users cannot access any resource network or application of the SiteA while site A can access resources of site B. After removing remote VPN site configuration B can access the resources of the Site I joined the configuration of the two sites. Someone help me please site2site and remote VPN work at the same time.

  Please forgive me for not reading every line.

  an add-on quick about the pix configuration:

  change "isakmp key * address 213.181.169.8 netmask 255.255.255.255" at "isakmp key * address 213.181.169.8 netmask 255.255.255.255 No.-xauth No. config-mode.

• ASA Version 9.0 (1) - Ping works both inside and outside, WWW does not work for remote VPN

  I am at a loss, I can connect VIA VPN and Ping inside the IPs (192.168.1.2) and outside (4.2.2.2) IPs of the remote VPN client, but can't surf WWW. Inside the network, all users have WWW access and the network is fine. I'm new on the revisions to ver 8.3 and don't see what I'm missing?

  Info:

  ASA-A # sh xl
  in use, the most used 12 4
  Flags: D - DNS, e - extended, I - identity, i - dynamics, r - portmap,
  s - static, T - twice, N - net-to-net
  NAT inside:192.168.1.0/24 to outside:24.180.x.x/24
  flags s idle 0:10:46 timeout 0:00:00
  NAT outside:192.168.2.0/24 to outside:24.180.x./24
  flags s idle 0:00:59 timeout 0:00:00
  NAT inside:192.168.1.0/24 to any:192.168.1.0/24
  sitting inactive flags 0:11:51 timeout 0:00:00
  NAT any:192.168.2.0/24 to inside:192.168.2.0/24
  sitting inactive flags 0:11:51 timeout 0:00:00
  ASA-A #.

  ASA-A # sh nat
  Manual NAT policies (Section 1)
  1 (inside) to destination of (all) Inside_Net Inside_Net the VPN-NET VPN static static
  translate_hits = 3, untranslate_hits = 3

  Auto NAT policies (Section 2)
  1 (inside) (outside) static source Inside_Net 24.180.x.x
  translate_hits = 3, untranslate_hits = 184
  2 (outdoor) (outdoor) static source VPN-net 24.180.x.x
  translate_hits 97, untranslate_hits = 91 =
  ASA-A #.

  Journal of the Sho:

  % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
  % ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00
  % ASA-609001 7: built outside local host: 192.168.2.255

  % 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
  % ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00

  Current config:

  ASA Version 9.0 (1)
  !
  ASA-A host name
  domain a.local
  enable the encrypted password xxxxx
  XXXXX encrypted passwd
  names of
  IP local pool vpnpool 192.168.2.10 - 192.168.2.20
  !
  interface Ethernet0/0
  Inet connection description
  switchport access vlan 2
  !
  interface Ethernet0/1
  LAN connection description
  switchport access vlan 3
  !
  interface Ethernet0/2
  switchport access vlan 3
  !
  interface Ethernet0/3
  switchport access vlan 3
  !
  interface Ethernet0/4
  switchport access vlan 3
  !
  interface Ethernet0/5
  switchport access vlan 3
  !
  interface Ethernet0/6
  switchport access vlan 3
  !
  interface Ethernet0/7
  switchport access vlan 3
  !
  interface Vlan1
  No nameif
  no level of security
  no ip address
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address 24.180.x.x 255.255.255.248
  !
  interface Vlan3
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  banner exec   ********************************************
  banner exec   *                                          *
  exec banner * ASA-A *.
  banner exec   *                                          *
  exec banner * CISCO ASA5505 *.
  banner exec   *                                          *
  exec banner * A Services Inc.              *
  exec banner * xxx in car Street N. *.
  exec banner * city, ST # *.
  banner exec   *                                          *
  banner exec   ********************************************
  exec banner ^
  passive FTP mode
  DNS server-group DefaultDNS
  domain a.local
  permit same-security-traffic intra-interface
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  network of the Inside_Net object
  subnet 192.168.1.0 255.255.255.0
  network of the VPN-net object
  Subnet 192.168.2.0 255.255.255.0
  access-list extended sheep permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
  allowed incoming access extended gre a whole list
  inbound udp allowed extended access list any host 24.180.x.x eq 1723
  list of allowed inbound tcp extended access any host 24.180.x.x eq pptp
  list of allowed inbound tcp extended access any host 24.180.x.x eq smtp
  list of allowed inbound tcp extended access any host 24.180.x.x eq www
  list of allowed inbound tcp extended access any host 24.180.x.x eq https
  list of allowed inbound tcp extended access any host 24.180.x.x eq 987
  inbound udp allowed extended access list any host 24.180.x.x eq 25
  inbound udp allowed extended access list any host 24.180.x.x eq 443
  inbound udp allowed extended access list any host 24.180.x.x eq www
  inbound udp allowed extended access list any host 24.180.x.x eq 987
  pager lines 24
  Enable logging
  debug logging in buffered memory
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow all outside
  ICMP allow any inside
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  public static Inside_Net Inside_Net destination NAT (inside, all) static source VPN-NET VPN
  !
  network of the Inside_Net object
  NAT static 24.180.x.x (indoor, outdoor)
  network of the VPN-net object
  24.180.x.x static NAT (outdoors, outdoor)
  Access-group interface incoming outside
  Route outside 0.0.0.0 0.0.0.0 24.180.x.x 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Enable http server
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec transform-set ikev1 VPN remote esp-3des esp-md5-hmac
  Crypto ipsec ikev2 VPN ipsec-proposal-remotetest
  Protocol esp encryption aes - 256, aes - 192, aes, 3des and
  Esp integrity sha-1 protocol
  Crypto ipsec pmtu aging infinite - the security association
  Crypto-map dynamic dyn1 1jeu ikev1 transform-set remote VPN
  Crypto-map dynamic dyn1 1jeu reverse-road
  map VPN - map 1-isakmp ipsec crypto dynamic dyn1
  VPN-card interface card crypto outside
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  trustpool crypto ca policy
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  Crypto ikev1 allow outside
  IKEv1 crypto policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0

  dhcpd outside auto_config
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  user name UName encrypted password privilege 15 xxxxxxxxx
  type tunnel-group remote VPN remote access
  attributes global-tunnel-group VPN-remote controls
  address vpnpool pool
  tunnel-group, ipsec VPN-remote controls-attributes
  IKEv1 pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  Cryptochecksum:43db9ab2d3427289fb9a0fdb22b551fa
  : end

  Hello

  Its propably because you do not have a DNS server configured for VPN users. Try this command:

   group-policy DfltGrpPolicy attributes dns-server value 8.8.8.8

• Cannot ping via remote VPN

  Hi all

  I have a client who uses a 506e with the cleint 4.02 for the remote VPN Cisco. The pix is multiple inside roads. The first network inside is 192.168.1.X and E1 of the 506 is 192.168.1.1. The second network is 10.71.56.X.

  The problem is as soon as the VPN is connected I can ping any host on the 192.168.1.X, but not anything on the 10.71.56.X network. Without netbios or the other. From the PIX, I can ping hosts on two internal networks.

  Here is the config below. Thank you!

  6.2 (2) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password xxxxx

  passwd xxxxxxx

  hostname GNB - PIX

  cisco.com-domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  QUBEADMIN tcp service object-group

  Beach of port-object 444 444

  outside_access_in list access permit tcp any host 12.X.X.X eq pop3

  outside_access_in list access permit tcp any host 12.X.X.X eq smtp

  outside_access_in list access permit tcp any host 12.X.X.X EQ field

  outside_access_in list access permit tcp any host 12.X.X.X eq www

  outside_access_in list access permit tcp any host 12.X.X.X QUBEADMIN object-group

  outside_access_in list access permit icmp any any echo response

  access-list outside_access_in allow icmp all once exceed

  outside_access_in list access permit tcp any host 12.169.2.21 eq ssh

  GNB_splitTunnelAcl ip 10.71.56.0 access list allow 255.255.255.0 any

  outside_cryptomap_dyn_20 ip access list allow any 10.71.56.32 255.255.255.224

  pager lines 24

  opening of session

  timestamp of the record

  logging paused

  logging buffered stored notifications

  Logging trap errors

  notifications to the history of logging

  the logging queue 0

  host of logging inside the 10.71.55.10

  logging out of the 192.104.109.91 host

  interface ethernet0 car

  Auto interface ethernet1

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside 12.X.X.X 255.255.254.0

  IP address inside 192.168.1.254 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  local IP VPNPOOL 10.71.56.40 pool - 10.71.56.50

  history of PDM activate

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  public static 12.X.X.X (Interior, exterior) 192.168.1.1 mask subnet 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 12.X.X.X 1

  Route inside 10.71.55.0 255.255.255.0 192.168.1.1 1

  Route inside 10.71.56.0 255.255.255.0 192.168.1.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Dynamic crypto map outside_dyn_map 20 match address outside_cryptomap_dyn_20

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 20

  ISAKMP policy 20 3des encryption

  ISAKMP policy 20 chopping sha

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  vpngroup address VPNPOOL pool GUARD

  vpngroup dns-server 10.71.56.10 GNB 10.71.56.10

  GNB GNB_splitTunnelAcl vpngroup split tunnel

  vpngroup GNB 1800 idle time

  GNB vpngroup password *.

  Telnet timeout 5

  SSH timeout 60

  Terminal width 80

  Cryptochecksum:XXXXX

  : end

  [OK]

  GNB - PIX #.

  You use 10.71.56.0 255.255.255.0 in two places

  you route to it via 192.168.1.1, but you're also allocation of addresses for vpn clients. Guests who are on the segment 10.71.56.0/24, if they manage to get the connected vpn client package (which is assigned a 10.71.56.x) address, would not send the response packet to this request on the local subnet, the router that has the 192.168.1.1 interface, which is what would be needed to make it work.

  You must use a different network for your vpn clients block - you cannot use the same ip through two different networks space.

• Try to connect to a remote VPN server

  This task was bleeding in my eyes. I can't make it work. I understand the principle of TCP-OUT ACCORD - IN but can't seem to reconcile it kind includes the firewall.

  Long and short of the situation:

  Company a static IP address assigned by the local society of DSL

  All computers inside network enjoy outdoor internet access and interconnectivity

  Remote VPN host has static IP

  Configuration VPN of a properly established and the remote control accounts are active.

  Does not connect when good ID and PASSWORD are entered.

  Anyone tried this before. Please assume that I have the skill level of a child of 5 years and the patience of the same thing.

  Thank you for your help.

  Timothy S. Murray

  A child under 5 huh? looks like a lot of people that I care. I'm kidding anyone, not me flame.

  In any case, we need a little more information here to go, it's a connection to a PIX PPTP you talk, or a router? Or is it IPSec (you mentioned GRE, that's why I think you speak of free WILL). Is the user authentication is done locally on the endpoint VPN device, or is it a server Radius/GANYMEDE involved?

  Can you send in the configuration of the end device, ensuring xxxxx valid IP addresses and passwords?

• PIX & lt; -> user policies VPN PIX and the Windows domain controller

  I've set up a star using IPsec VPN PIX network, all IP traffic is allowed to pass through.

  At the Center, there is a Windows 2003 Small Business Server.

  On remote sites, there is only Windows XP clients used by employees working remotely in the central office.

  Initially, I had a problem of authentication on the server, but I found a document suggesting the Kerberos setting to go to TCP instead of UDP and it solved this issue.

  Now, there is one problem remaining, I can authenticate and access the server resources such as file shares, I can connect to the server Exchange etc. But the client computers do not receive from the server group policies. The error message I am getting in Event Viewer Windows is Userenv id: 1054 - Microsoft suggestion is to check if the DNS works and works DNS, I can locate the DC etc. without problem.

  I tried to make LDAP queries on the server, and again, it works without problem.

  The NetBIOS resolution works very well.

  Basically, everything seems to work expect to get group strategies.

  Does anyone have any suggestions where I should look planned for the solution to this problem?

  Kind regards

  Flovin Olsen

  Here is a vbscript script you must run on every PC has the problem.

  -Cross-section below-

  Dim wshShell

  Set wshShell = WScript.CreateObject ("WScript.Shell")

  prefix = "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System\."

  prefix wshShell.regWrite & "GroupPolicyMinTransferRate", 0, "REG_DWORD"

  Prefix2 = "HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System\."

  wshShell.regWrite prefix2 & "GroupPolicyMinTransferRate", 0, "REG_DWORD"

  MsgBox "done."

  ---------stop cut -----------------

  Hope this helps

• Remote VPN site to site vpn on ASA?

  Hello

  I would like to know if it is possible to have this configuration with an ASA5510:

  (1) - remote access VPN (access by the external interface)

  (2) - site to site VPN (same access interface)

  The goal: users of vpn (1) can access the server remote vpn (2) and vice versa.

  Is it possible? and what is the best practice to do?

  Thank you very much!

  J.

  Yes, you can do it.

  Same-security-traffic command traffic to enter and leave the interface even when used with the

  keyword intra-interface, that allows the VPN support has spoke-to-spoke.

  Here are a few examples.

  http://www.Cisco.com/en/us/products/ps6120/prod_configuration_examples_list.html

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807f9a89.shtml

  PIX / ASA 7.X: Add a new Tunnel or remote access to an existing L2L VPN

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008046f307.shtml

  PIX / ASA 7.x enhanced has spoken-to-Client VPN with the example of setting up authentication GANYMEDE +.

• Access remote VPN question - hairpin

  Hello, I did a search before posting this question but I have not found anything specific to my situation.

  We have our ASA5520 configured in our main office to allow remote access Cisco VPN client users to access our network.  We have a (network 192.168.1.0/24) remote desktop we have a configured on the same ASA5520 VPN IPSec tunnel that allows the use of internal users (in the main office) to access resources on the network remote (192.168.1.0) and vice versa.  The problem is that when users connect to the remote VPN access, they are not able to access the resources of the remote office network.  We created the nat0 ACL and labour, and split tunnel routing is implemented for users VPN remote network access (if I make a copy of the route on my laptop after connecting to the VPN, I see the road to 192.168.0.0/24 in my routing table).  Routing everything is in place to do this, since the IPSec VPN tunnel is up and working.  My suspicion is that the question has something to do with the consolidation of these VPN clients.

  What else needs to be configured to work?  Thank you.

  Hi Scott,.

  I have a client with a PIX 515E which allows connections to remote VPN and VPN LAN2LAN multiple connections.

  We had this problem too... so what I made in my pix was:

  TEST (config) # same-security-traffic intra-interface permits (its off by default)

  If you use ASDM go to:

  Configuration > Interfaces >

  at the bottom of this page, there is an option that says: 'enable traffic between two or more host computers connected to the same interface '.

  Check and it should work... I hope

  I await your comments...

  Kind regards.

  Joao Tendeiro

• QuickVPN - could not do a ping the remote VPN router!

  Hello

  I have a RV042 (VPN router) and I have some problems to run properly using the QuickVPN client.

  Here is the Log of the QuickVPN client.

  2008-10-15 20:14:38 [STATUS] a network interface detected with 192.168.0.104 IP address
  2008-10-15 20:14:38 [STATUS] connection...
  2008-10-15 20:14:38 [STATUS] connection to a remote gateway with IP address: 96.20.174.84
  2008-10-15 20:14:38 [WARNING] server certificate does not exist on your local computer.
  2008-10-15 20:14:44 remote gateway [STATE] has been reached with https...
  2008-10-15 20:14:44 [STATUS] commissioning...
  2008-10-15 20:14:51 [STATUS] Tunnel is connected successfully.
  2008-10-15 20:14:51 [STATUS] verification of network...
  2008-10-15 20:14:55 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:14:58 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:01 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:05 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:08 [WARNING] failed to do a ping the remote VPN router!
  2008-10-15 20:15:11 [WARNING] Ping has been blocked, which can be caused by an unexpected disconnection.
  2008-10-15 20:15:19 [STATUS] disconnection...
  2008-10-15 20:15:25 [STATUS] Tunnel is disconnected successfully.

  I don't know how it is implemented, but if WuickVPN wait a form ping my router, it will not happen. I was never able to ping my router ouside of my ISP network.

  There is a way to disable the Ping process and continue with the VPN connection?

  QuickVPN try ping on the router via the VPN tunnel to check the connection. It should work without worrying about whether your ISP filters ICMP messages or not. The tunnel is encrypted your ISP won't know what you're doing.

  Please post the corresponding on the RV042 VPN log. That is expected to see how far you get.

  You have a firewall running on the computer? I think that some firewalls have difficulty with the traffic of ESP.

  What is the router that is connected to the computer? How is it that is configured?

• Remote VPN users cannot reach OSPF Inter networks

  Hi all

  Area0 & Grenier1. Grenier1 ASA has remote VPN configuration where users also use split tunneling. When the VPN plug-in users, accessing all respurces successfully in the area euro1, but unable to reach Area0 resources.

  But Area0 PCs can 'ping' on addresses IP VPN component software plug-in. I tried 'debug icmp trace', but not poping up even one message upwards all to initiate the 'ping' of the computer laptop VPN users.

  FYI... Grenier1 N/w: 10.251.0.0/16 and 10.251.40.0/24 has been used for VPN DHCP users. Everything works well except for the Area0 accessibility.

  Any suggestions... ?

  Thank you

  MS

  access-list extended sheep ip SiteA 255.255.0.0 255.255.255.0 SiteAVPN allow

  access-list extended sheep ip SiteB 255.255.0.0 255.255.255.0 SiteAVPN allow

• Tunnel VPN remote Internet and VPN remote VPN from Site to Site traffic?

  Hello

  We try to remote traffic from our users VPN tunnel through our ASA 5510 as well as to allow the only access for remote user VPN traffic to the other end of the all our VPN site-to-site connected to the same ASA. Basically, we who want to VPN in the network in order to access all of our networks business. We try to get away with this without using split Tunneling.

  I can currently get internal traffic from the remote user VPN to reach all other vpn site-to-site tunnels without the internet in tunnel. The problem is when I add the following statement to the NAT:

  NAT (outside) 1 10.10.19.0 255.255.255.0 * 10.10.19.0 is the address of the remote VPN Client

  Internet traffic to the remote VPN starts to get in the tunnel, but I lose the opportunity to reach one of the other tunnels from site to site by the remote VPN tunnel.

  I also begin to receive the following errors in the journal of the ASA

  3 July 1, 2009 12:34:18 305005 10.10.19.255 137 no group of translation not found for udp src outside:10.10.19.3/137 dst outside:10.10.19.255/137

  Any help with how NAT statements must be defined for this work would be appreciated.

  Thank you

  Will be

  Will,

  the link of this post for your scenario of vpn hub & speak reference, you problem may be on exempt nat rules.

  Have a second look at your sheep rules.

  Be sure to eliminate tunnel rules related to rheumatoid arthritis, as appropriate, to not let him get in the way of splitting.

  http://forums.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=security&topic=firewalling&TopicId=.ee6e1fa&fromOutline=true&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2e0f6/4

  If always emits discribe topology for l2ls and info logic RA and sanatized hub config asa... but I think if you look at the thread above, you should be able to solve.

  Concerning

• WebVPN and remote VPN access

  Hello

  Is there a difference between WebVPN and remote VPN access or they are the same.

  Thank you.

  access remote vpn consists of

  -IPSEC VPN remote access. It is part of the ASA, no permit required, requires pre-installed Client from Cisco VPN IPSEC on PC

  -with AnyConnect SSL VPN remote access. It requires licensing of SSL VPN on SAA. AnyConnect client can be installed automatically on the PC with the launch of web.

  -with Essentials AnyConnect SSL VPN remote access. Beginning with ASA 8.2 (1), almost license $ 0. It's the same AnyConnect client as in the previous article, but it cannot be installed automatically with the launch of web. It must be previously installed as of Cisco IPSEC VPN client.

  -webvpn aka clientless vpn. It is a portal HTTPS which allows HTTP connections, file sharing, telnet, RDP and much more (with smart tunnels) resources without having to install a real client on the PC. It requires licensing of SSL VPN on SAA. It cannot be used if "AnyConnect Essentials" license is activated on SAA after 8.2 (1)

  Kind regards

  Roman

• Remote VPN client and Telnet to ASA

  Hi guys

  I have an ASA connected to the Cisco 2821 router firewall.

  I have the router ADSL and lease line connected.

  All my traffic for web ports etc. of ADSL ftp and smtp pop3, telnet etc is going to rental online.

  My questions as follows:

  I am unable to telnet to ASA outside Interface although its configuered.

  Unable to connect my remote VPN Client, there is no package debug crypto isakmp, I know that I have a nat that is my before router device my asa, I owe not nat port 4500 and esp more there, but how his confusion.

  I'm ataching configuration.

  Concerning

  It looks like a config issue. Possibly need debug output "debug crypto isa 127".

  You may need remove the command «LOCAL authority-server-group»

  NAT-traversal is enabled by default on the ASA 8.x version. So you don't have to worry about NAT device in the middle.