Verifier detected Violation

Similar Questions

• inpage Kernal error windows 8

  Hi all

  I have an Asus Viobook S200

  This week, he began to behave strangely. first of all a word document kept crashing, recovery and when I tried to open the recovery file it says that there is no space on the disk or something.

  Then, when you open a PDF file, it would freeze. Then I would get the blue screen of windows message 8 on that there is a problem and have to sh, this was due to a mistake of paging kernal. I was able to reboot and havie no question unless I open a PDF file. Then it happened randomly once. all the time, it restarts and works fine - but I don't know when the next crash will come.

  can someone please help me identify the questions?

  Here's what I've done so far...

  -a ran a CHKDSK on the drive C - no errors.
  -a ran a memory - no error diagnostic tool
  -ran Malewarebytes - found 5 threats, all have been removed.
  After that all that he has operated. does not open the PDF files, but it leaves the viewer just close instead of freezing. I uninstalled this viewer in case.

  the next day he was sitting doing nothing and it restarted itself saying that he had a problem.

  in the link that you can find below

  http://1drv.Ms/1q7SeOY

  -a 6 dump files zip
  -the results of the CHKDSK command
  -My information system

  I would be very grateful if someone could help analyze and see if the problem is identifiable.
  hoping that my hard drive is not done...

  Thanks in advance

  Reset the auditor. Uninstall AVAST and turn on windows Defender.

  is the "Verifier detected violation asw.sp<===> " the question such that it is picked up by the auditor? ".

  AVAST uninstall utility.

  http://www.avast.com/uninstall-utility

  How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html

• X 51 starts, the potential problems of 660 GTX.

  Computer is only a few days old - Alienware x51.
  

  First thing I did was install the drivers recommended to me from the dell site after entering my service tag and OS - Windows 8 64bit. The video card driver that dell told me to install was 307.07.
  

  The next day, whilst playing a game, the screen froze and became covered in blue squares before restarting. Upon restart during the bios loading, the screen is covered in horizontal blue lines. Once bios loading has finished and windows starts trying to load the screen goes black and my monitor does not recognise my computer even though when i unplug the VGA it knows that is is unplugged. The computer will remain on with the screen black until I hold down the power button. Monitor and cable are running fine. this happened each time i tried to start the computer. After leaving it be for a few hours it turned on normally again. Thinking it was an overheating or a driver issue with my gtx 660 I installed a gpu temp program - Temps reached mid 70C during intense gaming. I also then went to the nvidia site and updated to the latest gtx 60 driver - 310.90 instead of 307.07. Around this point after installing some new apps etc i started to get constant blue screens, either - driver verifier detected violation or unexpected kernal mode trap. After removing my 3rd party anti virus and settling with windows defender this somewhat remedied the blue screen problem.
  

  I then ran a video card stress test from the dell site. Part way through the test the screen froze with blue (and yellow/red) squares, requiring a restart. upon restart the screen had the same blue line on it and would not start. after a few goes it eventually did.
  

  Then during a skype video call I had the screen freeze with the blue squares again before restarting itself. The blue lines appear on start up again during the bios load before the screen going black. This has stayed this way and i have not been able to turn it on.
  

  I turned the computer on and through holding F8 navigated my way to restoring my system using the alienrespawn in order the restore my pc to how it was when it was sent to me (without the drivers I installed).
  

  However, this did not work and i still can not turn the computer on as the blue lines appear and the screen still goes black .
  

  Additionally, now I cant enter safe mode as I need to finish setting up windows (entering country and email etc like I had to when I first turned it on).
  

  I have waited half a day and the same still happens - during bios load horizontal blue lines. after bios load screen goes black, computer stays on, requires forced shut down.
  

  I have emailed tech support and am waiting on their response also.
  

  Intel Core i7-3770 3.4GHz, 8GB (2 X 4GB) Dual Channel DDR3 up to 1600MHz, 1.5GB GDDR5 NVIDIA GeForce GTX 660, 1TB SATA 3Gb/s (7,200RPM) 32MB Cache, Windows 8, 64-bit, English.
  

  I had the GPU replaced, and haven had any problems since.

  My theory as to why the first GPU did not work, it's that the fan would not increase to cool. So when I played a demanding game it has overheated and fried.

  I am using MSI afterburner with the new GPU, to set a more conservative fan speed and keep it cool.

• Violation detected Driver Verifier.

  So I got a screen of pilot detected Violation blue came, and I was wondering if anyone would be able to help me with it here. I got place 8 times so far, and each time was only by practicing a certain game. I wouldn't know that it was something the game caused, whereas it is quite addictive for me. Here are the. DMP link files.
  https://SkyDrive.live.com/?CID=3416a1973ee34b63&ID=3416A1973EE34B63! 107
  Want a quick answer, but I know that everyone at this time is busy.

  The errors referenced DRIVER_VERIFIER_DETECTED_VIOLATION the nvlddmkm.sys which is the NVIDIA display driver.

  You can try to update the NVIDIA display driver:

  http://www.nvidia.com/object/notebook-WIN8-Win7-64bit-320.49-WHQL-driver.html

  In addition, 'disable' the driver verifier - do this before updating the display driver:

  Start > type verifier.exe and press 'Enter' on the keyboard > clear the existing settings > finish > click 'Yes' to the message to delete the settings and exit the program

  In addition, there were two other errors.

  One was a mistake DRIVER_POWER_STATE_FAILURE (9f) referring to the AiCharger.sys.

  I would say to uninstall the software Asus Ai Charger.

  The other mistake was a mistake with APB.exe (APB Reloaded) UNEXPECTED_KERNEL_MODE_TRAP as the process that crashed.

  This error can be caused by ESET Firewall (s).

  It seems to be an older version of ESET Smart Security installed which may not be fully compatible with Windows 8.

  I suggest to uninstall ESET Smart Security and see if improves stability.

  Consider the alternative security software such as Windows 8 (Windows Defender) integrated antivirus and firewall, or you can try the latest version of ESET Smart Security.

  Also, consider to update, if possible, TeamViewer, TuneUp Utilities. PowerISO, VMWare and the driver for the game like these software keyboard all have older drivers.

• several error on a blue screen in windows 8

  Hello

  Windows 8 machine get several error on blue screen with different bug control every time. mini dump link http://1drv.ms/YASxed

  Can you please give some help to solve this problem?

  Thank you.

  Hello

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1 a, {fffff68000012430, aa300001401e0886,411, fffff68000012031}

  -1 setting of the bug check is 411 indicating a page table entry (PTE) was damaged.

  I suspect a 3rd driver causing corruption.

  -----------------------

  1. uninstall your Netgear Wireless Solution software, it is unnecessary and dated for almost 8 years ago.

  2 Please also also uninstall your software Check Point, of course, a virtual card. Device drivers are 7 years old.

  3 if accidents continue after both of foregoing, please activate the driver verifier:

  Driver Verifier:

  What is the driver verifier?

  Driver Verifier monitors Windows kernel-mode drivers, drivers graphics and even 3rd party drivers to detect function calls illegal or actions that could corrupt the system. Driver verifier may submit Windows drivers to a variety of constraints and testing to find the incorrect behavior.

  Essentially, if there is a 3rd driver party supposed to be originally the issues at hand, enabling Driver Verifier will help us see which specific driver is causing the problem.

  Before you enable Driver Verifier, it is recommended to create a System Restore Point:

  Vista - START | type rstrui - create a restore point
  Windows 7 - START | type create | Select "create a Restore Point.
  Windows 8/8.1 - http://www.eightforums.com/tutorials/4690-restore-point-create-windows-8-a.html

  How to enable the driver verifier:

  Start > type "auditor" without quotes > select the following options.

  1. select - 'create a custom settings (for code developers).
  2 select - "choose custom a complete list settings.
  3 check the following boxes.
  -Special pool
  -Pool management
  -Force IRQL control
  -Detection of blockages
  -Security Checks (only on Windows 7 & 8/8.1)
  -DDI compliance verification (only on Windows 8/8.1)
  -Cheques
  4 select - "select the driver names from a list.
  5 click the 'supplier '. This will cause the sorting of all drivers by the provider.
  6 check EACH box that is NOT provided by Microsoft / Microsoft Corporation.
  7 click Finish.
  8 restart.

  Important information about driver verifier:
   
  -Perhaps the most important which I now make it clear that it was bad often, activation of the Verifier itself is not! a solution, but rather a diagnostic utility. He'll tell us if a driver is causing your problems, but even once it will not solve your problems purely and simply.

  -If the Driver Verifier finds a violation, the system will search BSOD. To expand on that a bit more for those interested, more precisely what driver verifier actually does is he's looking for any driver to perform illegal function calls, causing leaks memory, etc.. When and / in this case, the corruption of the system occurs if allowed to continue. When Driver Verifier is enabled by my instructions above, it is followed all pilots 3rd part (as we have defined it this way) and when he catches a pilot tries to do, it will be quickly mark this driver as being a troublemaker and bring down the system safely above all corruption may occur.

  -After activation of the Verifier and rebooting the system, according to the culprit, if for example, the driver is started, you may not return to normal Windows because Driver Verifier detects in violation almost right away, and as noted above, which will cause / force a BSOD.

  In this case, do not panic, follow these steps:

  -Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

  -Once in Mode safe - start > Search > type "cmd" without the quotes.

  -To disable the Driver Verifier feature, type cmd ' auditor/Reset"without the quotes.

  -Reboot and start Windows normally.

  If your OS has become corrupt or you cannot start Windows after you disable the auditor through Safe Mode:

  -Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

  -Once in Mode safe - start > type "System Restore" without the quotes.

  -Select the previously created restore point.

  -Note that Safe Mode for Windows 8/8.1 is a little different, and you may need to try different methods: 5 ways to boot into Safe Mode on Windows 8 and Windows 8.1

  How long can I keep the compatible driver verifier for?

  I recommend keeping it activated for at least 24 hours. If you do not BSOD right there, turn off Driver Verifier. Usually, I say if, yes or no, I would like for you to keep active longer.

  My system BSODS with enabled, driver verifier where I can find the crash dumps?

  -If you have the system planned to generate small images of memory, they are in the %systemroot%\Minidump.

  -If you have the system planned to generate images of the kernel memory, it will be located in the % systemroot % Directory and labeled MEMORY. DMP.

  For any other question can most likely be answered by this article:

  http://support.Microsoft.com/kb/244617

  Kind regards

  Patrick

• Power failure Windows 8 pilot State

  I have recently upgraded to Windows 8 and a new system and I do experience pilot failure State breaks down. According to previous posts I may have an outdated driver that needs to be updated.

  Here is a link to the minidump files he has created:

  https://onedrive.live.com/redir?RESID=CA33D835F9E483A9%21132

  Any suggestions?

  Thank you

  NAT

  Hi Nat,

  DRIVER_POWER_STATE_FAILURE (9f)

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  > [16, 2] 0 1 ffffe000f7806790 00000000 00000000-00000000 pending
  \Driver\usbccgp
  Args: 00041100 00000001 00000001 00000002
  [16, 2] e1 0 ffffe000f8808280 fffff801b0bad2d8-ffffe000f41db010 00000000 success error cancel pending
  \Driver\ksthunk nt! PopRequestCompletion

  Something 3rd party is causing USB related conflicts.

  ----------------------------------

  1. remove and replace AVG with Microsoft Security Essentials to temporary troubleshooting purposes, as likely, it does not transition correctly during the upgrade and is causing conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  2 if accidents continue after the above, please enable the driver verifier:

  Driver Verifier:

  What is the driver verifier?

  Driver Verifier monitors Windows kernel-mode drivers, drivers graphics and even 3rd party drivers to detect function calls illegal or actions that could corrupt the system. Driver verifier may submit Windows drivers to a variety of constraints and testing to find the incorrect behavior.

  Essentially, if there is a 3rd driver party supposed to be originally the issues at hand, enabling Driver Verifier will help us see which specific driver is causing the problem.

  Before you enable Driver Verifier, it is recommended to create a System Restore Point:

  Vista - START | type rstrui - create a restore point
  Windows 7 - START | type create | Select "create a Restore Point.
  Windows 8/8.1 - http://www.eightforums.com/tutorials/4690-restore-point-create-windows-8-a.html

  How to enable the driver verifier:

  Start > type "auditor" without quotes > select the following options.

  1. select - 'create a custom settings (for code developers).
  2 select - "choose custom a complete list settings.
  3 check the following boxes.
  -Special pool
  -Pool management
  -Force IRQL control
  -Detection of blockages
  -Security Checks (only on Windows 7 & 8/8.1)
  -DDI compliance verification (only on Windows 8/8.1)
  -Cheques
  4 select - "select the driver names from a list.
  5 click the 'supplier '. This will cause the sorting of all drivers by the provider.
  6 check EACH box that is NOT provided by Microsoft / Microsoft Corporation.
  7 click Finish.
  8 restart.

  Important information about driver verifier:
   
  -Perhaps the most important which I now make it clear that it was bad often, activation of the Verifier itself is not! a solution, but rather a diagnostic utility. He'll tell us if a driver is causing your problems, but even once it will not solve your problems purely and simply.

  -If the Driver Verifier finds a violation, the system will search BSOD. To expand on that a bit more for those interested, more precisely what driver verifier actually does is he's looking for any driver to perform illegal function calls, causing leaks memory, etc.. When and / in this case, the corruption of the system occurs if allowed to continue. When Driver Verifier is enabled by my instructions above, it is followed all pilots 3rd part (as we have defined it this way) and when he catches a pilot tries to do, it will be quickly mark this driver as being a troublemaker and bring down the system safely above all corruption may occur.

  -After activation of the Verifier and rebooting the system, according to the culprit, if for example, the driver is started, you may not return to normal Windows because Driver Verifier detects in violation almost right away, and as noted above, which will cause / force a BSOD.

  In this case, do not panic, follow these steps:

  -Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

  -Once in Mode safe - start > Search > type "cmd" without the quotes.

  -To disable the Driver Verifier feature, type cmd ' auditor/Reset"without the quotes.

  -Reboot and start Windows normally.

  If your OS has become corrupt or you cannot start Windows after you disable the auditor through Safe Mode:

  -Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

  -Once in Mode safe - start > type "System Restore" without the quotes.

  -Select the previously created restore point.

  -Note that Safe Mode for Windows 8/8.1 is a little different, and you may need to try different methods: 5 ways to boot into Safe Mode on Windows 8 and Windows 8.1

  How long can I keep the compatible driver verifier for?

  I recommend keeping it activated for at least 24 hours. If you do not BSOD right there, turn off Driver Verifier. Usually, I say if, yes or no, I would like for you to keep active longer.

  My system BSODS with enabled, driver verifier where I can find the crash dumps?

  -If you have the system planned to generate small images of memory, they are in the %systemroot%\Minidump.

  -If you have the system planned to generate images of the kernel memory, it will be located in the % systemroot % Directory and labeled MEMORY. DMP.

  For any other question can most likely be answered by this article:

  http://support.Microsoft.com/kb/244617

  Kind regards

  Patrick

• Qosmio F30 - CD/DVD player can't read

  Hello
  any body can help me? A few months ago, I upgraded my Qosmio F30-112 from win XP to Win 7 Home premium, it's working prity good everything works fine. A few days ago I tried to play a movie but my Player cannot read the
  I tried to change another disc, but completely impossible to read a DVD disc. I heard the disc inside works, then I'm trying to trouble shoot using the tools DIFFICULTY was the messages:

  Playing and burning CDs, DVDs and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  UT message has been reading and burning CD, DVD and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  Insert a CD, DVD or BD completed support

  The player could face a problem player could face a problem
  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn any CDs, DVDs or BDS Detected.
  Potential problems that have been verified
  The drive is a Plug and Play drive of Problemel device has a problem of Plug-and-Play device
  Windows has detected a device with this drive state error and will keep control of problems. There is no question
  A CD, DVD or BD player was not CD, DVD or BD Detecteeun player is not found.
  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected. There is no question
  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device]
  The drive is not accessible without a drive letter assigned. There is no question

  Problems found details

  6 disc in drive [E:] is not detected or is not supported is not fixed

  The drive is empty, or the format of the disc is not supported.
  Insert a CD, DVD or BD completed support

  Invites to insert a CD, DVD or BD supported in the player.

  The player could face a detected problem

  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn CDs, DVDs or BDs.

  Potential problems that have been verified detection details

  The drive has a problem of device Plug-and-Play is no issue

  Windows has detected a device with this drive state error and will keep control of problems.

  A CD, DVD or BD player was not detected issue not present

  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected.

  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] question does not exist

  The drive is not accessible without a drive letter assigned.

  Details of detection

  A CD/DVD/BD drive is selected
  IDE\CDROMMAT***A_DVD-RAM_UJ-846S___F103___\5&3796F2E5&0&0.0.0

  The type of inserted media and other information.
  The drive is not recognized by the reader. The disc could be damaged, inserted backwards or have a format not supported.

  Collection information
  Computer name: QOSMIO-PC
  Windows Version: 6.1
  Architecture: x 86
  Time: Sunday, May 30, 2010 20:07:10

  Publisher details

  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  I tried all these things but I can't solve it, an organization can help me on this things

  Thank you
  rtmasagca

  Hello

  Try to remove the UpperFilters and LowerFilters.

  Here are the instructions:
  http://support.Microsoft.com/kb/982116

• M6 HP ENVY: ENVY m6 0xC1900101 - 0 x 40017 8.1 Windows installation error

  Windows 8.1will not install. This error message appears at the end of the installation.   Error 0xC1900101 - 0 x 40017. I've seen a lot of posts on this problem but no useful information to solve the problem. Help, please!

  Hello:

  In this case, try these suggestions-

  Run sfc/scannow: Option 2 in this tutorial - http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-windows-8-a.html

  Restart the system

  If the SFC scan detects violations of integrity and corrupted files - run the DISM command - follow option 1 in this tutorial: http://www.eightforums.com/tutorials/26512-dism-fixing-component-store-corruption-windows-8-a.html

  Restart the system

  Windows updates

  Open devices and update the network driver manager, also check your HP support page for the latest version of the Wi - Fi - download, save driver & install it

  Run all updates in the Windows store

  Run Windows Update again

  Running the disk cleanup: http://www.eightforums.com/tutorials/44274-windows-update-cleanup-windows-8-a.html

  Uninstall all Antivirus software, disable Windows Defender

  Delete all Temp - temp type to run the program, it will open the temp folder, delete everything. In the same way - type folder to run the program, remove all files in the folder that opens upward. Click ignore all, if you are asked for any confirmation when deleting files.

  Run "Prefetch" to run the program - it will open another feed, select, and delete all

  Restart the computer

  Rerun the Windows 8.1 update.

  Concerning

  Visruth

• Win 7 Win Update checks the updates forever

  Hi all

  The Win Update started hanging perhaps bar 1 or 2 months ago.

  I tried the installer of Win and although it resolved some of the problems, I still can't Win to search for updates.

  

  Details of the updated editor PrintWindows

  Problems found
  Registration for the service is missing or corruptService record is missing or damaged fixed fixed
  Sign up for the service Reset Completed
   
  Windows Update, error 0 x 80070490 (2016-08-28-T-05_59_57P) 0 x fixed fixed Windows Update error 80070490(2016-08-28-T-05_59_57P)
  Reset Windows Update Completed in the data store
   
  Problems installing recent updatesProblems recent installation updates fixed fixed
  Fix Windows Update finished
   
  Problems installing recent updatesProblems recent installation updates fixed fixed
  Fix Windows Update finished
   
  Potential problems that have been verified
  Windows Update environment variables are variable incorrectWindows to update environment there is no such thing as incorrect question
  Some security settings are missing or have been changedSome security settings are missing or have changed there is no question
  Check missing verrouillesfichiers or damaged, missing or corrupt files in question does not exist
  Windows Update services aren't runningWindows update services perform no matter does not exist
  Encryption services components are not the registeredCryptographic service components are not registered there is no question

  Problems found details

  6 registration for the Service is missing or damaged fixed fixed
   
  Sign up for the service Reset Completed
   
   
  6 0 x fixed fixed Windows Update error 80070490(2016-08-28-T-05_59_57P)
   
  Reset Windows Update Completed in the data store
   
  InformationalDataStoreAndWULogFiles.zip
  34.98 MB
  File name: DataStoreAndWULogFiles.zip
   
   
   
  6 problems to install these updates fixed fixed
   
  Fix Windows Update finished
   
  Fix Windows Update services and dependencies
   
  6 problems to install these updates fixed fixed
   
  Fix Windows Update finished
   
  Fix Windows Update services and dependencies

  Potential problems that have been verified detection details

  Windows Update environment variables are incorrect question does not exist
   
   
  Some security settings are missing or have changed there is no question
   
   
  Search for the missing or to issue corrupted files does not exist
   
   
  The Windows Update services running not issue does not exist
   
   
  Encryption services components are not registered there is no question

  Expand detection details

  Report InformationalError
  RootCause: RC_DataStore
  Error code: 0 x 80070490
  TimeDetected: 2016-08-28-T-05: 59:57 P
   
  File InformationalCollected
  File name: CheckSURLog.cab
   
  Collection information
  Computer name: FAIRY - PC
  Windows Version: 6.1
  Architecture: amd64
  Time: Sunday, August 28, 2016 17:59:48

  Publisher Expand details

  Background Intelligent Transfer Service
  Find and fix problems that may be preventing substantive work downloads
  Package Version: 1.2.1.20140627
  Publisher: Microsoft Corporation
  Windows Update
  Find and fix problems with Windows Update
  Package Version: 8.1.1.20160515
  Publisher: Microsoft Corporation
  Windows Update
  Find and fix problems with Windows Update
  Package Version: 8.1.1.20160515
  Publisher: Microsoft Corporation

  **********************************************************************

  I see not all installed update more. It is said that it was never updated after having tried what was suggested here:

  https://support.Microsoft.com/en-us/KB/2509997

  Method 6: Reset the contents of the Catroot2 folder

  To do this, follow these steps:
  1. Open an administrative command prompt window.
  2. Type the following commands and press ENTER after each command:
     • net stop cryptsvc
     • MD %systemroot%\system32\catroot2.old
     • xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2
  3. Delete all the content of the catroot2 folder, but do not delete the catroot2 folder.
  4. Type the following command and press ENTER:
     net start cryptsvc
  5. Close the command prompt window.

  It seems that I do not have a catroot2 folder. Any suggestions at this point?

  Thank you!

  & bughuntress

  Try this fix for Windows Update

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• error 0 x 80070005 trying to update Win7x64Ultimate to 10 (cannot install)

  All important & required updates have been installed.  Disabled antivirus.  Connected to the admin account.  You run Fixit, AccessChk (but the accesschk.txt file is empty), there is no ' HKLM\Components 'pendingrequired = 1' REG_DWORD, have run reset.bat (but it says 'subinacl' is not recognized as int or ext cmd), said windows update troubleshooting tool:

  Details of the update of Windows editor
  Problems found
  Registration for the service is missing or corruptService record is missing or damaged fixed fixed
  Sign up for the service Reset Completed
  Windows Update, error 0 x 80070005 (2016-05-02-T-03_05_19P) 0 x fixed fixed Windows Update error 80070005(2016-05-02-T-03_05_19P)
  Reset Windows Update Completed in the data store
  Problems installing recent updatesProblems recent installation updates fixed fixed
  Fix Windows Update finished
  Problems installing recent updatesProblems recent installation updates fixed fixed
  Fix Windows Update finished
  Potential problems that have been verified
  Windows Update environment variables are variable incorrectWindows to update environment there is no such thing as incorrect question
  Some security settings are missing or have been changedSome security settings are missing or have changed there is no question
  Check missing verrouillesfichiers or damaged, missing or corrupt files in question does not exist
  Windows Update services aren't runningWindows update services perform no matter does not exist
  Encryption services components are not the registeredCryptographic service components are not registered there is no question
  Problems found details
  6 registration for the Service is missing or damaged fixed fixed
  Sign up for the service Reset Completed
  6 0 x fixed fixed Windows Update error 80070005(2016-05-02-T-03_05_19P)
  Reset Windows Update Completed in the data store
  InformationalDataStoreAndWULogFiles.zip
  31.24 MB
  File name: DataStoreAndWULogFiles.zip
  6 problems to install these updates fixed fixed
  Fix Windows Update finished
  Fix Windows Update services and dependencies
  6 problems to install these updates fixed fixed
  Fix Windows Update finished
  Fix Windows Update services and dependencies
  Potential problems that have been verified detection details
  Windows Update environment variables are incorrect question does not exist
  Some security settings are missing or have changed there is no question
  Search for the missing or to issue corrupted files does not exist
  The Windows Update services running not issue does not exist
  Encryption services components are not registered there is no question

  Expand detection details
  Report InformationalError
  RootCause: RC_DataStore
  Error code: 0x80070005
  TimeDetected: 2016-05-02-T-03: 05:19 P
  File InformationalCollected
  File name: CheckSURLog.cab
  Collection information
  Computer name: BACKUP-PC
  Windows Version: 6.1
  Architecture: amd64
  Time: Monday, may 2, 2016 15:05:03
  Publisher Expand details
  Background Intelligent Transfer Service
  Find and fix problems that may be preventing substantive work downloads
  Package Version: 1.2.1.20140627
  Publisher: Microsoft Corporation
  Windows Update
  Find and fix problems with Windows Update
  Package Version: 8.1.1.20140627
  Publisher: Microsoft Corporation
  Windows Update
  Find and fix problems with Windows Update
  Package Version: 8.1.1.20140627
  Publisher: Microsoft Corporation

  Problem has been resolved.

  By my second post above, fortunately I was able to do upgrade to 10 Windows so I no longer need help.

  Thank you for your offer to help.

• Recovery disk - &#62; secure startup violation detected invalid signature

  Hi all

  I just bought a new MSI laptop and everything is going well except burning a DVD of recovery of MSI recovery Brüning.

  In order to avoid any accident has occurred in the system, I decide to do a series of recovery DVDs.

  However, MSI engraving sofeware recovery does not work.

  After that, Center MSI gave me a series of recovery for window 8 DVDs.

  When I tried to use this DVD set by pressing F3--> use the device--> disk--> restart

  ---> It out this check detected invalid signature secure boot secure boot policy violation.

  I can't do the recovery with this 8 DVD set of "victory.

  It is THEREFORE necessary to make recovery dvd in my own laptop? (this DVD set was median by Center of MSI)

  any solution to help?

  Thank you for your attention.

  Hello

  Let us work together to solve this problem.

  If Windows 8 works fine, then contact support on how to create a recovery disk, MSI using MSI recovery software.

  You can also create a System Image, using the history of the Windows files.

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  I suggest you to create a recovery disk, as it can come very handy when needed.

  Please get back to us with the results and any other questions you may have about the Windows operating systems.

• violation of pilot detected

  Hey,.

  I have also the BsoD said but I can't find the source of my problem.

  Here is a link to the dumpfile:

  https://onedrive.live.com/redir?RESID=191DA9FE8F9B8E1A%21887

  I read the other posts and my Nvidia is up to date, and the solutions posted here do not work for me.

  If you would like more information, feel free to ask me questions.

  Best regards

  Quincy

  Hey Quincy,

  The attached file of the DMP is to bug checking DRIVER_VERIFIER_DETECTED_VIOLATION (c4) .

  This is the verification code of general bug for fatal errors, found by Driver Verifier.

  BugCheck C4, {91, 2, fffff803a9d5d880, 0}

  0: kd > k
  Call child-SP RetAddr site
  fffff803 'ab4cdfe8 fffff803' a9b1e34e nt! KeBugCheckEx
  fffff803 'ab4cdff0 fffff803' a9a42fd5 nt! : FNODOBFM: 'string' + 0x3ecfe
  fffff803 'ab4ce030 fffff803' a9a41c28 nt! RtlEnoughStackSpaceForStackCapture + 0 x 15
  fffff803 'ab4ce060 fffff803' a9a41cb0 nt! RtlWalkFrameChain + 0 x 48
  fffff803'ab4ce090 fffff880'0484475 d nt! RtlCaptureStackBackTrace + 0 x 44
  fffff803'ab4ce0c0 00000000 00000000' nvlddmkm + 0x1b775d

  Video driver nVidia switched batteries using a method that is not supproted by the operating system. The only way to support to extend a stack in kernel mode is by calling KeExpandKernelStackAndCallout.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  Kind regards

  Patrick

• CPD Watchdog Violation on my Toshiba Satellite and impossible to verify updates

  I had Violation Watchdog DPC on my Toshiba Satellite. It's frustrating to worm. How can I solve this problem?

  Here's my minidumps files https://skydrive.live.com/redir?resid=67BCFC4F8EC6B99B 107

  Hi Sheikh R,.

  You seem to have two software antivirus/firewall in real-time installed, Norton and Avira which can cause stability problems.

  Can you uninstall Norton and Avira and see if that helps.

  For security software consider using just firewall and antivirus integrated Windows 8 (Windows Defender).

  I would also uninstall the c:\windows\system32\drivers\sptd.sys pilot who has been known to cause blue screen errors in some configurations.

  Uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it's Daemon Tools or Alcohol 120%.

  Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:

  http://www.duplexsecure.com/en/FAQ

• Driver Detective seems to be a 'partner' of Microsoft. Anyone can verify this as fact? And is this a reliable site?

  Became 'nervous in the service' when I opened similar sites.  Of course, they offer to clean your PC problems; but they also - almost immediately - try to sell you something!  I'd appreciate a few 'war stories' on experince (s) with JJ.

  Anyone can be a Microsoft Partner, you can register your cat if you want... If you have a cat.  "Most Microsoft Partners are good ethical companies or individuals but any who can can all themselves as being a Microsoft Partner and in no way can depend on you as a consumer as proof of the legitimacy or competence of the ' touter '.

  As far as I am concerned the better most of these types of tools have very limited use, and at worst, they are perfectly useless borderline scams, I certainly wouldn't pay for any of them and I'd be suspicious of some or most of them.

  You're having problems with your computer?  What makes you think that you need to update your drivers?  Drivers rarely need to update, as a rule that you usually just update drivers to resolve specific problems, when it comes to the pilot the motto "if it ain't broke don't fix it' is a good one to follow.

  As long as these utilities that come with claims that they will be 'clean', tune and speed up your computer just stay away from them, most of them is that powder useless Perlimpinpin or outright scams and mostly they cause more harm that good, not just this kind of garbage on your computer.

  John

• Detected each time you start Driver Verifier

  I was updating my Nvidia GeForce software today and suddenly had a blue screen with the message above. What's really weird is that whenever I start my computer now, I get this message. The second, I connect the blue screen will go up. Does anyone have any suggestions?

  Hello

  Do back or uninstall your current nVidia Driver and install the previous version which worked without problems.

  Kind regards

  Patrick