violation of pilot detected

Similar Questions

• ATAPI - event ID:11 - the pilot detected an error on \Device\Ide\IdePort0 controller.

  I'm getting following error in my event log Watcher:

  Log name: System
  Source: atapi
  Date: 2009-11-01 01:18:38
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hendrim-PC
  Description:
  The driver has detected an error on \Device\Ide\IdePort0 controller.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      53536
      System
      hendrim-PC
     
   
   
      \Device\Ide\IdePort0
      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000
   
  

  Anyone any idea what is the cause?

  I replaced all the cables and hard drive but I get the same error (wasted money).

  When you start the PC and get "PIO MODE" in computer/manage/Device Manager / IDE ATAPI controllers ADA / ATA Chanel X/properties/Advanced is the cause, your PC is frozen.

  My "temporal" solution for this problem is:

  1 - Turn off the PC.

  2 - pick Up and the hard drive cable through the same port of the motherboard

  3. start the PC and the control in the advanced settings box-> "Ultra DMA Mode 6"; right now, you can work without problems.

  * If you can trade your motherboard (all under warranty) DO!

  -. - We are all waiting FOR you than get Microsoft a solution to force the departure to the top of "PIO MODE" to "ULTRA DMA 6"

• Windows crashes every 10 minutes for abt 30 sec / 2 min with «the pilot detected an error on \Device\Ide\IdePort0 controller»

  History/context: This problem started happening on my Dell Vostro 220, while he was new (May 09), on Windows Vista that it came preloaded with. I figured a SATA controller and a defective Dell replaced both my HD (& SATA cables) and Mobo. But ongoing problem - then Dell suggested to set access drive in AHCI mode in the BIOS. I did and in HD and installed also XP. Problem persisted. XP errors in the journal system came as '\Device\Ide' and '\Device\Hd0' sometimes sometimes. Reference Dell insists that it is a driver problem Windows. Since then, I still formatted hav clean and installed with Windows 7, what I use now. But the problem persisted.

  System:
  Dell Vostro 220 with Intel Core 2 Duo E7400 @ 2.8 Ghz, 4 GB of RAM (3 GB usable), running Windows 7 Professional 32 bit. 1 x DVD Writer TSST Corp TS - H653F ATA hard drive WDC WD2500AAJS - 75M0A0 ATA

  Symptoms:
  On bad days, it happens every 5-10 minutes; other times 30 min. Locks up system / freezes during 30 sec to 2 min during which I am able to move the mouse cursor, but do not click on anything anyone or do anything else. When Frost "thaws" if I check the Logs of error in the system log I still see the "EventID:11" error "Source: atapi ' 'driver has detected an error on \Device\Ide\IdePort0 controller. Sometimes (not always) I also see a spike in the graph of CPU use if I check right after the "thaw", but I was not able to determine what process as I am looking after the fact. Normally, there are 4 SATA Ports on the motherboard. 0.1 were used for HD, DVD. If I unhook the DVD drive altogether and connect the HD SATA cable to the port marked 2, I get the same errors, but "\Device\Ide\IdePort0" becomes "\Device\Ide\IDePort1".

  Other note (s): During the installation of the OS, Dell has a "Intel Matrix Storage" listed as critical on their site, but when I try to install it, it says "no compatible hardware not detected" and install exists.

  Also, interestingly, if I take the HD (in blue) to the total of SATA cable and try to connect SATA cable from the DVD recorder to the orange (originally) between individual ports Mobo and HD, I get a mobo error - flashing 3 light and "beep" as soon as I turn on. It disappears if I go back to blue SATA cable from the Hd for HD

  Hello

  As you have informed us that you are always faced with the question after installing Windows XP and Windows 7.

  I suspect that the problem is somewhere in the material or the SATA ports on the motherboard. I suggest you to contact the manufacturer of your computer for help, because they will be in a better position to help you.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• EventID:11 - the pilot detected an error in the controller on \Device\Ide\IdePort4.

  I started getting the following error message:

  Log name: System

  Source: atapi

  Date: 16/03/2013 18:36:37

  Event ID: 11

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Sanja-PC

  Description:

  The driver has detected an error of the controller on \Device\Ide\IdePort4.

  The event XML:

   

     

      11

      2

      0

      0 x 80000000000000

     

      169902

      System

      Sanja-PC

     

   

   

      \Device\Ide\IdePort4

      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000003000000000000000000000004100000

   
  The last time I had this error was for malware using ESET secruit security check. During which I got like 11 errors with event ID 11 in the observer diary of events. Next, I had warnings of ntfs with event ID: 57:
  Log name: System

  Source: Ntfs

  Date: 16/03/2013-17:24:11

  Event ID: 57

  Task category: (2)

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: Sanja-PC

  Description:

  The system failed to flush the data in the transaction log. Corruption may occur.

  The event XML:

   

     

      57

      3

      2

      0 x 80000000000000

     

      169876

      System

      Sanja-PC

     

   

   

     

     

      0000000001000000020000003900048000000000850100C 000000000000000000000000000000000

   
  The system works fine, no freezes or crashes, but I would like to know what is the cause, is it hardware or driver related?

  Hello

  Thank you for contacting Microsoft Community.
  Since you don't face any problem while working, the system works very well. The error in the log occurred due to the error of the driver in this case. But immediately, Windows is taking measures to restore the driver, so that the system works very well. The journal entry is just a notification. During the scan, the higher the use of the disc, so the number of failures is likely to increase. It occurs even in situations where there is a transfer of files.

• Violation detected Driver Verifier.

  So I got a screen of pilot detected Violation blue came, and I was wondering if anyone would be able to help me with it here. I got place 8 times so far, and each time was only by practicing a certain game. I wouldn't know that it was something the game caused, whereas it is quite addictive for me. Here are the. DMP link files.
  https://SkyDrive.live.com/?CID=3416a1973ee34b63&ID=3416A1973EE34B63! 107
  Want a quick answer, but I know that everyone at this time is busy.

  The errors referenced DRIVER_VERIFIER_DETECTED_VIOLATION the nvlddmkm.sys which is the NVIDIA display driver.

  You can try to update the NVIDIA display driver:

  http://www.nvidia.com/object/notebook-WIN8-Win7-64bit-320.49-WHQL-driver.html

  In addition, 'disable' the driver verifier - do this before updating the display driver:

  Start > type verifier.exe and press 'Enter' on the keyboard > clear the existing settings > finish > click 'Yes' to the message to delete the settings and exit the program

  In addition, there were two other errors.

  One was a mistake DRIVER_POWER_STATE_FAILURE (9f) referring to the AiCharger.sys.

  I would say to uninstall the software Asus Ai Charger.

  The other mistake was a mistake with APB.exe (APB Reloaded) UNEXPECTED_KERNEL_MODE_TRAP as the process that crashed.

  This error can be caused by ESET Firewall (s).

  It seems to be an older version of ESET Smart Security installed which may not be fully compatible with Windows 8.

  I suggest to uninstall ESET Smart Security and see if improves stability.

  Consider the alternative security software such as Windows 8 (Windows Defender) integrated antivirus and firewall, or you can try the latest version of ESET Smart Security.

  Also, consider to update, if possible, TeamViewer, TuneUp Utilities. PowerISO, VMWare and the driver for the game like these software keyboard all have older drivers.

• Message error "the driver detected a controller on \Device\Harddisk5\D error.

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  It could be malware believe it or not. It could also be a failing hard drive. I recommend that you first scan your computer with scanners on the links below ensuring that update you before the analysis.

  Malwarebytes.org

  SUPERAntiSpyware.com

  If the scans are own return, you will need to go to the website of the manufacturer of your hard drive and download the diagnostic tool for your hard drive. It will probably take an iso that burn you to a disc and make it bootable. Let me know the results of the analysis, and we'll go from there.

• Start secure on a Dell coming Pro 8 Violation message

  I started my Tablet (Win 8.1) after that execution of a certain number of Windows updates yesterday and now I see is a "Violation Secure Boot - detected invalid signature.  Check the police Secure Boot configuration"message after the Dell logo appears.  There is an OK button appears which responds not to the touch.

  I tried to boot several times with the same result.  How to solve this problem?  I don't have a mouse to set on this tablet.

  How to get into the setup of the BIOS without a mouse?

  Any help would be appreciated.

  It is also discussed on the Microsoft Community

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_install/th210547-secure-boot-signature-violation-when/f90bafb1-6ffe-4E1A-A726-d51205e7a00d?auth=1

  It is a Microsoft software engineer named David Linsley participating in this discussion.  His last post on 23/09/15:

  "Unfortunately you can not activate Secure Boot when a boot manager is repaired or a flight with the fix of Boot Manager is sent. I'll answer here when one is true, and I'll try to make sure that Gabe blog also mention when it is fixed. »

• Driver has detected an error in the controller on \Device\CdRom0

  I have a laptop running Vista Home Premium 32 Bit.  The DVD - RW drive is not working after that the PC wakes up from sleep mode.  I get the following error.

  "The pilot detected an error on \Device\CdRom0 controller."
  Log name: System
  Source: cdrom
  Event ID: 11
  Level: error

  I already tried the MS-Fix-IT solution and MS Knlowledge base 314093 bolt torque and 154690 nothing helps.  I really saw all other posts with this same problem.  The drive to function properly when the PC starts first, but it runs just when I put in a disk after getting out of the mode standby.  The system also has stop some time when I try to reject the disc turns, but it eventually starts fine.

  I appreciate any help I can get with this problem.  Please let me know if I can provide more information.  Thank you!

  Hello

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  2 try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This update the default driver stack and help clear corruption.

  ------------------------------------------------

  3 use these methods to solve the outstanding issues.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The driver has detected an error of the Comptroller on \Device\Ide\IdePort3

  Hello

  I'll try to explain my problem as best as possible in chronological order then please bear with me.

  I have Windows 7 x 64.
  So last week my PC have been freezing every two days. Sometimes every day. Black screen during the games, navigation or doing any activity. Each window has frozen, the screen went black. ctrl alt del did not work no response to any entry, the only option was to restart.

  Once restarted, the system would freeze again almost immediately, and again after another reboot. Only solution was physically turn off the computer, turn off the power and wait.  After some time (5-10 min) I turn the power on and system worked very well.

  I went to the observer of events and found "the pilot detected an error of the Comptroller on \Device\Ide\IdePort3." It took place in a series starting with a per minute, then after a few minutes, two or three that occur within one minute, the frequency of this error would be gradually go back even to 10 per minute and that's where the system would freeze.

  Looking at the event viewer I thought, hold for a second I have 3 discs (Disk0 - new SSD, Disk1 - new HDD, Disk2 - old HDD) so maybe that ideport3 refers to the CDROM which I disconnected but the error has not disappeared.

  Check the BIOS settings and deleted everything that had no boot from the internal storage (so: floppy USB - disk, CDROM,)-which did not help either.

  In the Act of desperation, I unplugged my old disk (Disk2) for 6 days I have not known of IdePort3 errors and system will work very well.

  After 6 days, to my embarrassment, error returned.
  This is the story of the appearance of the error:

  10/05/2015 19:56 - after that, I unplugged old hdd
  16/05/2015-09:35
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:34
  16/05/2015 14:35
  16/05/2015 14:36
  16/05/2015 14:36
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015 14:37
  16/05/2015-17:28
  16/05/2015-17:29
  16/05/2015-17:31
  16/05/2015-17:33
  16/05/2015-17:33
  16/05/2015-17:34
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:35
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:36
  16/05/2015-17:37 - after this system error stopped

  Here are the details of the error

  -
  -
   
    11
    2
    0
    0 x 80000000000000
   
    107016
    System
    Odin
   
   
  -
    \Device\Ide\IdePort3
    0000100001000000000000000B0004C004000000850100C00000000000000000000000000000000001000000000000000000000005100000
   
   
   
   
  Let me know if you all the news and thank you for your time in reading my number.

  I bought the card mother-GA-Z68X-UD3-B3 3 years ago. There can be no IDE ports. It has 6 SATA ports.

  Here an explanation somewhat losely formulated to work on the port that could be the culprit. Since you have 6 SATA ports, why not play the game of elimination with them?

• HP n234sl: problem with drivers and information about the HP prog. compatible with windows 10

  HY,

  I have recently upgraded to Windows 10 and after that activation done a clean install of it. The pilots detected Windows itself, but there are 2 unrecognized drivers. The PCI express called like that.

  I wanted to ask you if there is a tool HP that detect all my hardware components and download the proper drivers. Because the Nvidia card, I installed myself.

  And another question, can I download old programs (such as Cyberlink, 7 zip, Hp Coolsense ect) 8.1 Windows system? (are they compatible with windows 10?)

  Thank you and best regards

  Please click the links provided which might come handy below

  http://support.HP.com/us-en/document/c04758308

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion 550-138nc: new PC does not start

  Hi all

  I just got a new 550-138nc PC Pavilion. When I turn it on I get the boot that device message is not found and that I should install the operating system on hard drive (3F0).

  When I ran F2 system diagnostics, everything is OK mind no error message, but now I see only one disc. This machine should have 2 discs - 128 GB SSD and SATA 1 TB.

  If I put myself in the BIOS that I see in storage - Device configuration as a disk and it is this 1 TB and a CD-ROM unit.

  I also tried to use my old own Win 7 64 - bit installation DVD to start at least (that I don't have any DVD or USB key) However, I get the error message:

  Secure Boot Violation - invalid signature detected. Visit the secure boot policy.

  Could please give me a tip or help - what is the problem? Partition on the SSD drive? Will be the recovery of the aid of HP support (I just ordered what follows)? Or is the all go SSD?

  Thank you very much.

  If the BIOS does not detect the SSD drive, then maybe a cable is unplugged.  Jump off the side panel to check if the wires of the card are in place or if the SSD is in a socket, see if it is placed correctly.

• Satellite A305D-S6914 - some problems after downgrade to XP

  Hello everyone. My company has recently bought this laptop for a customer. The computer came with Vista, but the client wanted XP. We have performed a clean installation of XP Pro and then stalked drivers from anywhere on the internet. Unfortunately, Toshiba support not directly from XP on this machine, and therefore, they have no official drivers to download. The machine works, but we have a few problems:

  1. application popup: \SystemRoot\System32\ativvaxx.dll failed to load

  2 details
  Product: Windows Operating System
  ID: 11
  Source: disk
  Version: 5.2.3790.1830

  Message: Drive - the pilot detected a cable or controller error.

  _Explanation_
  This event indicates that I/O failures occurred on the volume.

  _Cause_
  Possible causes include:
  A hardware failure that prevents communication with a disk (for example, a loose cable, a loose disk controller card or a rupture of the cable).

  _User Action_
  Do one or more of the following:
  Check the status of your hardware for any failure (for example, a disk, controller or breaking of the cable card).
  Check Event Viewer for additional events from the lower level storage drivers that may indicate the cause of the failure.
  Restart the computer.
  Contact the Customer Service Microsoft and Support.

  3 lately, svchost.exe has been scathing of the CPU at 100%. We have disabled the automatic updates, but the problem persists.

  Basically what is happening is that the machine crashes under the CPU load and the customer is required to turn it off with the power button.
  This is far from optimal, of course. I'm really at a loss for why this happens.

  Any help is greatly appreciated.

  Hello

  I see the file ativvaxx.dll failed. I think that this file belongs to the ATI graphics driver package.
  Possibly the ATI graphics driver that you have installed on this laptop causes this problem.

  I recommend the other ATI driver search and recommend to reinstall or update!

  Check some ATI drivers for European series on the Toshiba L300, maybe page pilot European you can solve this problem using the other drivers.

  Good luck

• Satellite P100-10U preinstalled Vista cannot read DVD - event code 11

  After the work with my new Toshiba P100-10U system could not read DVD more, it is still able to read CD-Roms! In Device Manager, an exclamation point grey is visible.

  The event log indicates repeatedly "Treiber Der hat einen Controllerfehler auf \Device\CdRom0 found.", something like "the pilot detected error on \Device\CdRom0 controller."

  I installed the system again, but the wrong behavior is still there.
  The system has a carpet * a DVD-RAM UJ-850 s drive.

  I already checked the registry entry {4D36E965-E325-11CE-BFC1-08002BE10318}. There's no UpperFilter or UpperFilter attributes.

  Any idea?

  Thank for Kalle

  Hello

  I m really surprised because such error problem should be resolved after the installation of the new operating system.
  More as you already suggested the filter upstream and downstream in the registry key are mainly responsible for these strange drive problems.

  In any case, I recommend to remove the drive from Device Manager and reboot the laptop. After restarting again the operating system should recognize the CD/DVD drive again. You should see a message as new device has been installed or something like that

  In addition, it would be desirable to use a system like CCleaner repair program. It s freeware!

  Finally, you should check the registry again if the upper and lower filter exists and delete it.
  Don t forget to reboot the device.

  Good luck

• "Error - printing LaserJet" 2100 TN

  This printer is an office where it worked fine via ethernet.

  It is not configured / has an anti-theft system so that in can only work in the office, right?

  My OS is windows 7 ultimate 64-bit.

  The printer prints on the page of configuration with IP etc. I was able to print the pages of another printer that is connected to the same router as my computer correctly (and 2100 TN is now). There is nothing wrong with either ethernet cable.

  I followed
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02850101&lang=en&cc=us&taskI...
   
  and installed PCL5, all seemed well until the test page, which was not being printed. If I try to print nothing happened Word Pad either. In looking at windows printer dialog box displays "error - printing". Even with PCL6, and if the choice of windows update to install the drivers in the Add Printer Wizard.
   
  If attempting to add it as a new product I get now dialog box saying "additional information required:
   
  http://gyazo.com/25ab5cf9ca0ea45ed900ae7b5e284d15
   
  restarted the printer. in wordpad status says ready. still does not work.

  HP Instant Support - Driver Check
  HP Instant Support - check pilot detected the following: connected printer: HP LaserJet 2100 Series PCL 5Operating system: Windows 2000Connection Port: 10.17.30.11_1
  Results: Cannot determine the status of your printer driver.

  Dear Sir, it seems you are the only one not to provide good information.

  Through google, I discovered that the way to reset the cold of this particular model is the JOB CANCEL button, not the wholesale/GO BUTTON.

  http://www.printertechs.com/printer-troubleshooting/cold-reset-instructions-HP-laserjets

  Once I did that I got a new IP address with my routers standrad format and I just now correctly printed the test page.

• Windows backup default - Eventvwr shows error on \Device\Ide\IdePort0 controller

  Hello

  I'm at my wits end. I got the error 0 x 81000037 when you run backups windows recently. I am backing up to an external USB drive.

  I went through the entire analysis point fix, I run scans antivirus complete and deleted all quarantines and I have now deleted all audio-visual products. I tried to back up selected folders, clean boots and I'm still not able to run a backup. However, I'm now not only this error code, but others.

  Looking at the event viewer, it seems that each backup error is preceded by 11 on atapi event: «the pilot detected an error on \Device\Ide\IdePort0 controller»

  I don't know what it is, but I wonder if this is what is at the origin of the problems, and if so, is this a problem with the external USB HARD drive or internal one.

  Can anyone help? I'm desperate to save my files.

  Hello

  You might face this question when the competent services for backup are not running, you can also face this question when the chipset drivers are corrupt. Make sure you don't have any other external device connected to your computer outside of the mouse and keyboard. I suggest you to make sure that the following services are running and set to automatic.

  Shadow copy volume

  • Windows backup service
  • Engine block of backup Service level
  • Windows event log
  • Task Scheduler
  • Click Start, click in the start, Search , type services.mscand then press enter and then check the benefits described above, one by one.
  • You can follow the steps in the link below and check if it helps you.
  • Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  • http://support.Microsoft.com/kb/973455

  You can also consult the steps proposed by Stephanie Podder dated 8 June 2013 , the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/event-ID-11-source-ATAPI-the-driver-detected-a/1c45a710-596f-468C-970D-74858d0a96b6

  Let us know if you need additional help from us.