Verizon DSL and wrt54g

Similar Questions

• Changing Verizon DSL broadband

  I changed my Verizon DSL dailup to broadband system. How to stop or remove window Signin to MSN for DSL to request my password. There is no DSL or telephone line connected to my system so there is no dail tone. The signin window MSN keep saying it is an error for no dailtone. To connect to my mail, I'm going to the internet to explore and connect to msn get my emails. But this msn window comes up. I tried to move MSN in the trash, but it does not help.

  Hi RalphBerdyck,
   
  Here are some articles that you might find useful:
  Error 680 - no dial tone
  How to troubleshoot "No dial tone" issues in Windows XP

• VPN between RV082 and WRT54G

  Hello
  I have problem with connection RV082 and WRT54G via VPN (gateway to gateway type).
  I created tunnel on the RV082, but ofcurse he does ' t work. Firewall on both routers is off.
  My setup
  RV082
  WAN address: 83.15.211.170 (DSL)

  WAN network mask: 255.255.255.248

  WAN gateway: 83.15.211.169

  Local address: 192.168.0.244
  Local netmask 255.255.255.0

  Local gateway: 192.168.0.244
  WRT54G
  WAN address: 95.50.235.202 (DSL)
  WAN network mask: 255.255.255.248 (the same ISP)
  WAN gateway: 93.50.235.201
  Local address: 192.168.1.1
  Local netmask: 255.255.255.0

  Local gateway: 192.168.1.1
  VPN:
  Local group: 192.168.0.0/255.255.255.0
  Remote group: 192.168.1.0/255.255.255.0
  Remote gateway: 95.50.235.202
  Everything seems to be correct, but I can not connect to RV082 to WRT54G. I have no error in the logs. Help, please

  The WRT54G is without VPN router. But there is no VPN capabilities. You cannot configure a tunnel VPN on the WRT54G.

• Verizon DSL

  I had satellite and passed to verizon dsl. I have a hub 16-port and a Linksys wr54g2 plugged into the uplink port. I plugged the DSL into one of the ports on the hub and everything was fine except the linksys could not get a connection. The verizon DSL has the gateway 192.168.1.1 address, which of course was the same as the linksys. When I attampt to the ppp, it wants a username and password. The problem here is that the DSL connection is always on and does not require a connection so I'm never able to connect in this way. The verizon DSL router assigns 192.168.1.15 DHCP thru 192.168.1.47 then how should I configure my linksys?

  1. Unplug the router on your network.
  2. Connect the router to a single computer.  Enter 192.168.1.1 in your browser.
  3. Let the empty user name and use admin as password.  On the settings page to change the 192.168.1.1 to 192.168.2.1, then click Save.
  4. Out of the router and reconnect the router to the network.
  5. You should now be able to access router with no problems

• Failure of intermittent internet connection using Vista on Verizon DSL

  I had problems with Verizon DSL stopping randomly and does not to return to the top for an unacceptable period of time. Oddly, it doesn't happen on the Vista machine at home. None of the Mac has this problem.  If I remove the machine network Vista and replace it with a XP machine is also no problem.  It's on a cable network.

  I think I can find some interesting information. What I did was as much the DNS entries my network connection that I could find. I have used google, OpenDNS, DNSadvantage, Verizon, Norton a few steps from my web services and everything else I could find. There certainly reduce questions but had some interesting effects for example one of the URLS pointing to obsolete the secondary DNS information.

  I'll post the DNS entries here except those owned by my web host.
  8.8.8.8
  8.8.4.4
  151.201.0.68
  208.67.222.222
  208.67.220.220
  156.154.70.1
  151.201.0.39
  141.150.0.68
  141.151.0.68
  141.151.128.68
  141.155.0.68
  71.252.0.12
  71.242.0.12
  192.168.2.1
  156.154.71.1
  198.153.192.1
  198.153.194.1
  4.2.2.1
  4.2.2.2
  4.2.2.3
  4.2.2.4
  4.2.2.5
  4.2.2.6
  67.138.54.100
  207.225.209.66

  To enter these click on "Start"-> "Control Panel"-> "Network and sharing Center", click on "Manage network connections", double click on the active card, click 'Properties', double click 'Protocol Version 4 (TCP/IPv4) Internet', click on 'Advanced... '. ', go to the "DNS" tab, click on "Add..." "and enter the values.

  This is not a complete solution. Sometimes, still, but not as often. Some sites still bring the network to its knees.  Sometimes she lets wait for the connection to be reborn and run a WHOIS on the site that has the problem of one of their DNS to add to your list. I put it to the top after google's servers and it seems to work most of the time.

  I went through all of the so-called "patches" of this problem without success.   What is the solution?  It seriously makes me batty.

  Hi mark11_23,

  Got several things for you to try:

  1. How old is your router, you should consider updating the firmware on your router. Some older routers do not sit will be Vista (or 7) and require an update of the firmware.
  2. Update the driver for your NIC directly from the manufacturer's website. You'd be shocked to see how many sons of connection to network on these forums are caused by a newer driver.
  3. No chance that you are able to get the issue of duplicate mode safe?
     http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  4. If the problem does not occur in Mode safe mode, go to a clean boot and locate the item causing the problem.
     http://support.Microsoft.com/kb/929135
  Let me know the results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

  Macbeth,

  From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

  http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

  

• I have a Verizon Tablet and trying to figure out how I can download the software on this subject?

  I have a Verizon Tablet and the invitation to the cloud of AdobeCreative through my school, University of Everest online. I was trying to figure out how I can get the same download to my Tablet?

  Hello

  Please see: -.

  Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  Also, you can read:-what tablet do you use with creative cloud / Apps?

• connection problems router WRT310N and wrt54gs * with DSL

  Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

  I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

  A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

  I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

  highlights include:

  (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

  (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

  (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

  router 4) implements the home network wireless very well, but with no internet connectivity

  (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

  I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

  everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

  and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

  so... help?

  still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

  Any ideas on where I'm wrong now?

  Fixed issue...

  in the end, it's a problem between the ISP's modem and the router that they helped me understand.

  My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

  We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

• I am not able to print from my 2nd computer. I use Verizon Fios and I use a Belkin Wireless connection to connect to the router

  I can't print from my 2nd computer.  I use Verizon Fios to communicate with a wireless router (Belkin) (main? / main thru?).  I have 2 computers that access my internet connection.  The 1st computer that is in the same room as the router "verizon" and the printer is capable of printing.  The 2nd Bureau is not.  But there is good communication with the internet.

  Would it in my settings that could very well be the problem?

  Hello

  1. what operating system is installed on your second computer?
  2. has been the second computer can print very well without any problems in the past? If Yes, you did any hardware or software changes before the show?
  3. that you get an error message when you attempt to print from the second computer?
  4. What is the brand and model of the computer and the printer?

  Please provide us with more information about the issue so that we can help you better. Visit the link below and send your request.
  Suggestions for a question on the help forums:
  http://support.Microsoft.com/kb/555375

  In the meantime, you can refer to the links below.

  Troubleshoot network printer in Windows Vista and Windows 7:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Resources for the resolution of the problems of printer in Windows XP:
  http://support.Microsoft.com/kb/308028

  Kapil Purohit - Microsoft

• Network with DSL and wireless setup problem

  I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

  Give me some advice on, dsl, wireless configuraion in switches

  Kind regards

  Mohammed

  Used Google...

  http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• PS3 XP and WRT54GS problems

  Equipment: 1 home computer: Microsoft Windows XP Home Edition Version 2002 Service Pack 2 (several others include: Vista with all updates and a MacBook Pro, but the computer is the computer with all the software)

  2 Linksys Wireless-G Broadband Router With Speedbooster. Model WRT54GS

  3 PS3 with all firmware updates

  Problem: I'm having serious problems with practically everything in this configuration... Problem: my router Linksys software gives me the error message: "problem! Internet connection does not work. "Even with this error, I always get a wireless connection on all computers, the PS3, and a PSP in the House.  I did everything the software told me to do and I still get the error message.  Problem 2: At random times when I use the internet options on my PS3 to the internet disconnects from everything, (including the PS3), and I have to disconnect and reconnect the router to get things working again.  This problem tends to occur at random times every time I use the internet on my PS3 but on my PS3 which kills the internet every time, there is a specific function: multimedia Streaming of my XP for my PS3.

  If anyone can help me to solve these problems, I would be deeply grateful!

  LELA update.linksys.com/lela/install/lela.exe update

• AE1000, WRT120N and WRT54G

  Hiya,

  I have my WRT54G configured as an Access Point G/B with the WRT120N as the router and intended to be wireless N only for one couple of other computers that support theoretically superior performance...  The WRT54G manages all my G devices (TiVo, a couple of iPhones, a netbook adapter) with no problems.  The adapter AE1000N and the WRT120N, however, cannot connect unless I have change the N Router only Mixed, how they right hook to the top...  I would like to have suggestions to make the WRT120N-AE1000N combo to work together in wireless-N mode. (Windows 7 Pro.)  Thank you!

  Tim

  What is the wireless settings you have set up on your router (SSID, channel, Security Mode)? Try changing the channel wireless on your router to 1 or 11 and then try to connect to your wireless network.

• Configuration with Speedtouch 5 x 6 and WRT54G

  Hello

  I have a WRT54G, I have an internet connection that is connected via a Modem Speedtouch 5 x 6.

  I tried to configure my router wireless with automatic DHCP configuration, I can't access the internet.

  Can someone please help me with this Setup, I'm pretty new in this.

  When I'm connected to the internet through my wired connection th ipconfig looks like this:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : lan
  ... Description: 590 x Broadcom Ethernet 10/100
  Physical address.... : *************************
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::a12d:d1a8:b94f:d244% 11 (Preferred)
  IPv4 address: 192.168.1.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: February 7, 2009 09:30:33
  End of the lease...: February 8, 2009 15:12:04
  ... Default gateway. : 192.168.1.254
  DHCP server...: 192.168.1.254
  DNS servers...: 192.168.1.254
  NetBIOS over TCP/IP...: enabled

  Thank you for all the advice I receive.

  This is the IP address you get from your Modem. Then just do... Open an Internet Explorer browser page. In the address bar type - 192.168.1.1 leave name empty username & password use admin lowercase... Once to connect to the Linksys router configuration Page... Below, you will see "Local IP address" will be: 192.168.1.1, you need to change to: 192.168.2.1. and click on save settings... and do the feeding Cycle... Disconnect the power from the router and Modem... wait 30 sec and seizure of power, the first Modem... again after waiting 30 seconds and connect the power supply to the router Linksys... and check if you are online.

• Problems with the new modem DSL and Linksys BEFSR41

  My Speedstream modem died and I had to buy a new modem.  At this time of year, it is difficult to find exactly what I wanted and I ended up buying a D-Link DSL - 2320-B.  I got the Linksys BEFSR41 (old version 1, I think) for years and it has always worked well.  I have problems to get an internet connection through the router.  With the modem connected directly to the network card, as now I have no connectivity problem.  I had to change the IP address on the Linksys BEFSR41 192.168.2.1, as the modem is 192.168.1.1, 192.168.0.1 as the old Speedstream.  I couldn't see a way to change the IP Address of the new D-Link.  I have my ICS TCP/IP set to auto obtain IP and DNS.  I was previously created for a fixed IP of * provided by the router.  Even with the setting on the router to "Obtain an IP address automatically", I can't to the internet with the router in the middle.

  Any help will be appreciated.

  Your modem is a combination of the modem and the router. The problem occurs when you try to connect another router behind this configuration and end up having 2 servers dhcp and nat 2 (for port forwarding and other issues, creating in some cases where even branded products use ip addresses will clash and devices will not connect at all when him are interconnected).

  To avoid the situation described above, it is recommended that you enable the full Bridge mode on the modem / router that you currently connected to the internet and let your new wireless router controls all the functions within your local network and the internet connection (you must enter all the details in the new router, including Internet service provider username and password).

• Desktop Dell Inspiron 530, Verizon Mifi and not found Internet network

  I have a Dell Inspiron 530 desktop computer and I have a wireless mifi Verizon for Internet access point.  I thought that my office had a wireless card but I can not find it the network of the mifi. MiFi work because my phone can get it. What should I do to get my office to pick it up if it's still possible?

  Thank you, following these steps I found that my office does not have a wireless card. So I guess I'll do something different for the Internet. Thanks again!