Very long time tasks relay

Similar Questions

• I can't update ipad. It only shows check updated very very long time. No change.

  I can't update ipad. It only shows check updated very very long time. No change.

  Show this message where? Put you up to date on WiFi? If you are, try to update with iTunes. If you don't have a computer and are based on the WiFi only, try this.

  Settings > airplane Mode > on. Who will sign you out of WiFi. Now, do a forced restart. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

  Return to settings > airplane Mode > Off. That will reconnect to the WiFi. Try to update again.

  If this does not help, pwer cycle of your router. Unplug it from power for 30 seconds, plug back in and then try to update again.

• Often quick book hangs for a very long time, when it is updated transactions in SQL Server

  Original title:

  SQLServer

  We have a network running MS Windows Server 2008 Standard R2.  We also have QuickBooks Enterprise V12 multiuser.  I understand that QB is running on a version of SQL Server.  Often it hangs for a very long time, when it is updated to the transactions (there are only 2 users and we rarely data at the same time).  If the problem be helped if we are running SQL server on the server?  Or maybe that we run already?

  Ask the question in the SQL Server forums:
  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  or in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Loading very very long time

  Good day to all,

  If anyone has had a situation where there is a load very long time. I play by an LMS content and it will not load or just continually trying to load forever. I wonder if there are any settings within Captivate that this would cause?

  

  We use IE7, Java JRE Version 1,6,0,39, Flash 8, 800, 94 v11, v12, 1, 2, 152 Shockwave

  Thank you very much

  REv

  And how much megabytes is your published content?  You have not said that, but it is usually the most important factor.  Also check if your preloader is set to 100% as it is the default setting in Captivate, but can be significantly reduced in order to improve the performance of loading time.

• dynamic table takes very long time to compile

  Hello

  in a small program, I need to create a wide range:

  FIXED-SIZE ARRAY:
  [27] Char hash [26] [999] [99] [16];

  But not in all cases, the last item in the hash table has a value (string
  15 bytes), so I want to create a dynamic array to save memory.

  TABLE SIZE DYNAMICS:
  char * hashtable [27] [26] [999] [99];
  .......
  If (strlen (hash_string)) hashtable [a] [b] [c] [d] = malloc (sizeof (char) *)
  (strlen (hash_string) + 1)) ;

  .......

  In debug mode:

  If I compile the program with the array of fixed size, all working properly and
  the program runs immediately

  If I compile the same program with the table dynamically (and using malloc)
  It really takes time to compile. It seems that the program freezes,
  But if I wait quite a long time (several minutes), the program runs

  I am using CVI 2009

  Any ideas why it takes so long if I use dynamic memory?

  Thanks in advance,

  Norbert Rieper
  Bremerhaven

  When CVI compiles the file in a configuration of debugging with debugging level value Standard or extended, then we allocate data protection user to track the State of each pointer in the table. For each of the pointer values 69 million that we allocate data to add to your executable file to control execution. These allowances are initially the apparent blow.

  There are several ways to prevent CVI to distribute all of these additional data.

  (1) change the level of debugging "no run-time checking.

  (2) change the base type of the array of ' char *' to 'size_t '. You must also add a cast to all the references to the elements of the array.

  (3) select it's Enable. Obj option' option for the file that contains the definition of the table. This turns off debugging for this .c file.

  3 (b) move the declaration of the array to its own .c file and the option "Enable.obj" what .c file instead of the .c file that contains all the source data that uses the table.

  Although you need only 70 MB for dynamically allocated strings, you must always 265 MB to store the array of pointers to 69 million.

  -Michael

• Strange behavior of "RT Get CPU Loads.vi"; first call lasts a very long time!

  I spent a considerable time of debugging a new application, after that we decided to migrate to the new architecture. When a more common coding errors where eliminated, the application started running smoothly for short periods before suddenly freezing until the moment where the connection to the target RT has been lost.

  I finally understood as a Subvi, which returns the data to the system (use of memory, the cpu load, etc.) lasted if long run than the queue to feed this consumer loop filled with tasks causing eventually the memory fills. I have done some testing of the Subvi separately and noticed that "CPU Get RT Loads.vi" takes forever to run the first time, it is called after a target restart and then quickly runs during subsequent calls.

  Is this known behaviour? Other ways to solve this, except 'RT Get CPU Loads.vi' call during initialization?

  The VI has an entry "session in? If she uses the system of screw configuration, he may have to create a session on the first call you can do outside of your loop. If not and you have installed system configuration tool, you can try to use the nodes property to get the CPU - in more recent versions of RT, I think that the function you are using is obsolete.

  Can you post a snippet of your code / the VI?

• Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

  Hello

  The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

  I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

  P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

  Any suggestions or ideas? We are scratching our heads on this one.

  Thank you in advance for your time and help

  Tim Kerr

  Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~

  Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CHKDSK take very long time

  I have a system SATA drive appearing whenever it restarts chkdsk runs and it seems to work very well with no error, but then the system to reboot and the screen never beomes active. The computer seems to be peripheral, running lights, but the screen turns on and the keyboard synchronizes (it's a bluetooth). I let run now for 1 day, thinking that he was doing something, but nothing has changed. Previously, I let this happen and finally strong turned the computer off and when it restarts I stop the CHKDSK and the computer starts very well. Thoughts?

  Hello

  Stop chkdsk to run and then see if another error occurs.

  Disable or stop Auto CHKDSK during Windows startup - scroll to it.
  http://rahuldpatel.WordPress.com/2008/11/22/

  How can I stop CHKDSK from running each time my PC?
  http://www.OCModShop.com/OCModShop.aspx?a=874

  How to run check disk at startup in Vista - check methods 3 and 4
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Q10 security wipe on a Q10 takes a VERY long time

  wipe security took 56 hours. and the status is 99%. How quickly or another way to wipe. I need help * deleted *.

  Edit: Email deleted. At any time if you provide personal information to any other Member of the community. Please see the Community guidelines and terms and Conditions of use. for more information

  Hello

  We seem to be a lot of variation in the duration of a security WIPE will take. But the reasons are not completely clear enough... and so only you can decide when it has been too long.

  Once you decide, that it has been too long, your choice is:

  1. Remove the battery, wait 5 minutes and reinsert the battery
     • In some cases, the unit will simply continue with the WIPE. In other cases, it may do something else. YMMV.
  2. Use and automatic charger to force an OS own reloading on the device (which will include a device WIPE as part of what he does).
     • The autoloader should be able to force his way beyond the WIPE running and allow a reload of the OS to occur.

  Let us know if you need further instructions.

  Good luck!

• Guest operating systems take a VERY long time to start and stop to the bottom/connection

  I have a virtual VSphere version 4.1.0 of the client machine, I have a few top server, when I try to start or to stop them, they can take at least half an hour to do this.

  I really want to get this resolved, because it's way too long for an operating system to start.

  The server I want to talk to is a Windows 2008 64 Bit operating system.

  All the tips are greatly appreciated.

  Thank you

  Then replace the HARD drive.

  My guess is that it's completely unrelated to performance or whatever it is. It's probably a script to shutdown/startup/login or performed during these, making it a matter of the GuestOS. Maybe something trivial like nameserver names insoluble / defective (responses), waiting times of the ICF block or something similar.

  If the system running normal operations are fine, there is no ESX(I) - reason why he should be 'slow' for those own time only. Check the disk latency/throughput/Ops ARE / s when he knows.

• My iPhone 6 won't charge for a very long time

  I, I noticed that my iPhone 6 won't stay not charged. It uses the battery charge more that there never. The phone went through a full reload during the night. Anyone know what could be causing this and what I can do to fix this?  Where can I go if I have a new battery, due to the fact that I am not near a store Apple. My phone is yepars only two old.

  I think that the visit of the Apple Store is the best option. Specialists Apple will surely help you.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  Here you will find some useful tips on how to make the life of your device's battery more long. They work for 8 and 9 IOS iOS.

  http://www.IMore.com/battery-life-problems-iOS-9-heres-fix

  https://www.Apple.com/batteries/maximizing-performance/

  sues-iPhone-iPad-and-iPod-422229 http://www.idigitaltimes.com/iOS-82-Battery-Life-Problems-How-Fix-Quick-drain-is

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Firefox will not be upgraded or takes a very long time. What is going on?

  I log in as an administrator and click the firefox package, and he said 'extracting files. Once it is finished, it is a screen that says download. However, she just keep appearing to download with the light green bar goes from one side to the other, and nothing seems to happen. He left like that for several hours. Everything and yet it did not improve.

  Not either. logged on as another user, he says that firefox has been improved by another instance. What is the problem?

  Try this:

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

• After the upgrade to Firefox 7, sites regularly take a very long time to load.

  Since the upgrade to Firefox 7, I knew an intermittent problem where, in the attempt to load of a site, the status bar says "Connecting"... "and sits there without charging anything for several minutes. This happens usually after several minutes of normal use. Meanwhile, Firefox cannot connect to any site. He is also unable to check the updates. There is no error message; simply, it displays the icon of the "little wheel" and does not provide any additional comments.

  Close the tab where the problem occurred at the outset helps not, but completely close and restart Firefox made. However, the problem usually after several minutes of normal use after a reboot.

  No other application is affected. Internet Explorer, MSN Live Messenger, Thunderbird, and other applications of the network continue to operate normally while Firefox cannot load websites.

  I don't think that it is a firewall issue. The problem occurs even when all the firewall software - including the built-in Windows - Firewall has been disabled.

  In addition, if I let Firefox "spin" for several minutes, the problem suddenly clears up on its own, and the site I asked initially load normally. As with a reboot, when the problem is cleared up in this mode, generally occurs after a few minutes of normal use.

  Type of topic: config in the address bar (address) and press the Enter"" key. When you see a warning, click on I'll be careful, I promise! button.

  -> In the filter bar, type Network.http.Max - connections

  • Preference Network.http.Max - connections right click and choose Edit
  • Change the value to 30 or 48
  • Click OK

  -> Close the topic: config tab

  • Restart Firefox.

  Check and tell if its working.

• HP Pavilion TS 15-n263TX: 10 Windows Update, restart the system in a very long time

  Hello

  I have problems with my laptop, after I installed the update of the operating system Windows 10. Once installation is complete, my system went into a "restart" and has not restarted in fact still. He has been on the color screen, with the white circle, loading wheel beside the word "reboot" for about 17 hours now and I don't know if I have to force down my system or just wait it out. Thanks for the help.

  Hello

  Thanks for posting in the Forum from HP Support.

  Well, 17 hours is too so obviously he has stuck. Unfortunately, there is no other choice than hard reboot (using the computers start button).  There seems to be no other option.