VI failed to compile

Similar Questions

• Failed to compile SWF - pre-test

  All the

  I get a message failed to compile SWF.  This happens when I add a pre-test to my Captivate file which has a graduated test.  Everything works fine until I have add the pre-test.  Once I added the pre-test, I get the error even if I delete all the slides except 1 slide of simple text.  Can someone help me understand what is happening.  You can download versions of the Captivate file at the link below.  One is the file before the pre-test is added and one is, after the pre-test is added.  So frustrated.

  Download your files
  Please use the following identification number when prompted: 575874

  
  

  
  

  Hi Dan,.

  I see that you have applied some widget in Captivate PlayBar. You can try to remove it and check again?

  Regrads,

  MILIN

• Failed to compile swf CP8

  Hello

  I am trying to publish or preview a course of CP8, but I still have the same error message "failed to compile swf.

  I don't have special characters... I can't find the problem...

  Help!

  Thank you

  Try disabling all the compression options in the preferences > project.  The Advanced Compression setting is often problematic.

  If this does not resolve the issue, save a copy of the project and start to hide groups of slides and republish each time until it seems to work.  Then hide the slides in THIS group to find out who could be shifted upward in the process.

  If this does not work, remove all the measures put forward.

  If this does not work, copy all the slides in a new project shell and republish.

  If this does not work, your project is probably toast.

• RH10 made double path to some images and fails to compile HTML Help

  I have a project which has been upgraded several times.  RH10, until he has worked and still works in RH9.  RH10 fails to compile this project and "Stops working" in Win7-64.  This project has been removed from the version control that did not fail, but did test a lot faster.

  Towards the beginning of the 2 pop-up warnings compiling on the two images, we use as bullets that she, that the source does not exist.  There is no it's because it's doubly path (example: D:\project files\testproject\D:\project project\WarningSymbol.jpg 'cannot be copied to' D:\project files\testproject\!) SS! \Microsoft_Html_Help\! chm_temp_folder_0\D:\Project project\WarningSymbol.jpg. reason: source does not exist.

  Go figure, the path is stubborn.  I tried to search for all styles and all pages for the use of these images and buried somewhere in this project is a hidden link in the code that I can't find.

  In addition, the last file compiled prior to the stoppage has been redone so I think that this topic is ok.  I cut all of the text pasted into Notepad and replaced and reformatted to ensure there's no hidden strange characters.  No luck.

  Has anyone seen this?

  DV

  After messing around with this for a few days, I went back to the working version RH9 project, copied to another folder and opened in RH10.  It's working now.  Something in the previous conversion or something after the conversion to corrupt the global variable and other links.

  It seems to work now.  Good thing we saved.

  DV

• LOOK for iOS, 'HelloWorld' fails to compile

  Flash CS 5.5 v11.5.1.349

  Windows 7 Professional SP 1

  I get the compile error when you post AIR for iOS (Flash Cs 5.5). It does not, what is wrong, said simply that he was unable to compile the files.

  "Error creating files.
  Failed to compile... »

  The application is simple - is the example Hello World in the help section, but it still does not work. (Of course, I have all the necessary certificates created.) What is even more interesting, the same fla without changing file compiles well on Flash CS5.5 my colleague, even if (11.5.1.349) versions are identical.

  The only time I get that error is when a file is in use (or Windows thinks it's) because he has started or selected in Windows Explorer, then you will fail to compile the SWF itself. Otherwise, do not hit browse and specifically defining the path to export product also the error for me.

  Is generated all SWF? If so, it has a size (> 0Ko)?

  One thing you should definitely do more than overlay latest Adobe Flash CS5.5 AIR. This will ensure that you have all the latest patches and updates to AIR for iOS. This may solve your problem.

  Download the SDK here:

  http://www.Adobe.com/devnet/air/air-SDK-download.html

  Instructions on layering (disregard the version number difference, simply use the correct number of AIR, you're coming to overlap instead, from 13 to 16):

  http://helpx.Adobe.com/x-productkb/multi/overlay-air-SDK-Flash-Professional.html

  I also recommend to download and update Flash CS5.5 to have the latest version of Flash Player. This is so you can target and test using the version 16 (11.3 flash drive). Here is the download page for the Flash Player the latest debuggers, playerglobal.swc, etc.. :

  http://www.Adobe.com/support/flashplayer/downloads.html

  There is not a lot of information out there on how to install it in Flash CS5.5 but I'll give you the general jist:

  -Close Flash Pro

  -Install 2 browser plugins (activeX and plugin according to the debuggers)

  -Download the "projector content Debugger" and crush the FlashPlayerDebugger.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Debug

  -Download the "projector" and crush the FlashPlayer.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Release

  -Download the playerglobal.swc (make sure that it has named exactly that), then navigate to the default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\ActionScript 3.0

  -Create a folder in this path called "FP11.3" and place the playerglobal.swc in there.

  -Navigate to the default folder C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\Players

  -Duplicate the last FlashPlayer1x_x.xml file and name it FlashPlayer11_3.xml.

  -Change the file. Change the lines accordingly, the parts in bold are the changes:

  Flash Player 11.3

  Now you can restart flash and your target publication, you should see Flash Player 11.3 as target.

  To check 11.3 is installed correctly open a new AS3 document and paste this code and then run it using the DEBUGGER.

  Do not simply press CTRL +, it is just a player. Use CTRL + SHIFT + ENTER. You should now see the version followed 11.

  Here is the script code of the simple framework:

  import flash.system.Capabilities;

  trace (Capabilities.version);

  For using the debugger (CTRL + SHIFT + ENTER) I see: WIN 11,3,300,257

  For me using just came out (CTRL + ENTER): WIN 10,2,153,2

• Failed to compile without errors

  Hello

  Yes, I'm french sorry for my bad English.

  I have a problem with my CVI 2013...

  When I try to compile a simple project (1 Pentecost .c file a simple main function), out of my generation shows only 2 lines:

  Build status (test.prj - Debug)

  Build failed.

  Selected in the compiler Options compiler's compiler CVI Standard...

  I checked all the compiler Options and found nothing wrong...

  Please I need help...!

  Thank you very much

  
  

• After the accident of traced the effects CC Ray - 3D rendering engine of Initial shader failed to compile (5070: 12)

  Hello

  I recently bought a new laptop with i7, 16 GB of RAM and GTX860M 4 GB processor graphics card to be able to launch After Effects smoothly. I wanted to take advantage of the
  Feature of the traced the ray but once 3D rendering engine that I pass to it I instantly get three consecutive messages:

  1. after effects error: drawn in the 3D Department: Initial shader compilation failed (5070: 12)

  2. after effects error: drawn in the 3D Department: unable to create the context for Raytracer (5070: 1)

  3. after effects error: drawn in the 3D Department: paged memory mapped for Raytracer. Your project may exceed the limits of the GPU. Close other applications. Try to update the driver CUDA (5070: 2)

  I installed the latest CUDA driver, I even added my card in the raytracer_supported_cards.txt file, but the meassage always pop up. In the Panel of previev my specifications of card shows correctly

  (as shown on the picture as an attachment)

  

  That seems to be the problem - I have a decent map with lots of RAM Nvidia so I expect it must support a feature of 3d rendering engine.
  For any help or suggestion would be appreciated.
  Kind regards
  Peter

  It is not supported and that's it. you're wasting your time even thinking using this feature.

  Mylenium

• VMCI Sockets fail to compile

  Every time I run VMware Workstation 7.1.1 I got this warning:

  "Before able to run VMware, several modules must be compiled and loaded into the core of execution"

  I click on the "Install" button and everything is done, but 'VMCI Sockets' fail.

  Anyone know why this is happening?

  I'm running Debian with 2.6.35.3 kernel.

  The element of structure sk-> sk_sleep has been replaced in 2.6.35 with a function call, sk_sleep (sk).  So we have to correct Sockets VMCI, patching the source tarball from vsock.tar to use the new syntax of kernel for sk_sleep.

  I enclose a gzip would shell script to fix.  Gunzip just the attachment, do 'chmod 0755' to make it executable, and then run as root (or sudo).

  See you soon

• Ant fails to compile the modules that use the interfaces

  Hi, I have a major problem to compile flex with ANT modules.

  I'll try to give ALL the necessary information, so we can avoid unnecessary questions novice days.

  I have an application that uses a lot of modules.  They compile perfectly in flash builder.

  First question.  How can I get flashbuilder 4.7 to show me the command line that he uses for mxmlc?  If I could see it, I could do it all myself.

  Second question: what is the problem with my work below?

  I have a module that looks like this:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Module ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  Implements = "com. Hof.lobby.modules.IVolatileAssets ".

  Width = "400" height = "300".

  creationComplete = "onDummy (event)" "

  >

  Inside this module, I have several other properties that are themselves instances of type various other interfaces.

  When I build the main application, all right.

  I created a macrodef of ANT to build all my modules effectively.

  < name macrodef = "buildModule" >

  < attribute name = "module name" default = "none" / >

  < attribute name = "module-package" default = "none" / >

  < attribute name = "out-path" default = "'." / > "

  < sequence >

  < echo message = "building @{module-name} for @{out-path}/@{module-name}.swf" / >} "

  "< file="${APP_ROOT}/src/@{module-package}/@{module-name}.mxml mxmlc ".

  output="${DEPLOY_DIR}/@{out-path}/@{module-name}.swf".

  Keep-generated-actionscript = "false".

  incremental = "false".

  Debug = 'true '.

  fork = "true".

  external load-trainees = "${ANT_ROOT}" / link - report.xml ' "

  optimize = "false".

  >

  < filename="${FLEX_HOME}/frameworks/flex-config.xml"/ load-config >

  < path-element source-path = "${FLEX_HOME} / frameworks" / >

  < compile .library-path dir = "${HOF_COMMON_ROOT}" append = "true" >

  < name = 'bin' / >

  < / compile .library-path >

  < compile .library-path dir = "${APP_ROOT} ' append ="true">

  < name = 'java' / >

  < / compile .library-path >

  < compile .library-path dir = "${FLEX_HOME} ' / managers ' append ="true">"

  < name = 'java' / >

  "" < name = "... /bundles/ {local}" / >

  < / compile .library-path >

  < path-element source-path = "${APP_ROOT} / src/locale / {local}" / >

  < / mxmlc >

  < / sequential >

  < / macrodef >

  < target name = "modulesDebug" depends = "lobbyDependencies" description = "Building the Hall modules for debug" >

  <!-< buildModule-module = module package "InboxDlg" name = "com/hof/Hall/modules/dlgs" off-path = "modules3/dlgs" / >-->

  < buildModule-name of the module = module package 'VolatileAssets' = ' com/hof/Hall/modules' off-path = "modules3" / >

  < / target >

  Then, when I run this goal, I get the following result:

  modulesDebug:

  [echo] building modules3/VolatileAssets.swf VolatileAssets

  [mxmlc] F:\var\sdk\flex_sdk_4.5.1.21328A\frameworks\flex-config.xml configuration file

  [mxmlc] F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\src\com\hof\lobby\modules\Vola tileAssets.mxml(-1): Error: IVolatileAssets Interface was not found.

  [mxmlc] <? XML version = "1.0" encoding = "utf-8"? >

  BUILD FAILED

  F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\build.XML:98: The following error occurred during the execution of this line:

  F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\build.XML:51: mxmlc task impossible.

  Total time: 7 seconds

  If I remove the implements attribute in the definition of the module component, then I get a failure cascaded to EVERY SINGLE interface in the module.

  Basically something is causing ANT to fail to load the def for ANY interface class in the module.

  What on earth am I doing wrong?

  Help, please.

  Thank you.

  I answer my own thread because I absolutely HATE when I see a message with the problem I have and no response.

  Here is the answer to the problem:

  I had to create an external configuration file and load it with

  the content of ModuleConfig.xml re - defines almost every configuration framework.  None of them seem to non-standard for me...

  Basically I defined just to be what it SHOULD be and responsible for the config file after I applied the default flex - config.xml in the SDK.

  do what I posted below and it will work.

  so now my macrodef is:

  output="${DEPLOY_DIR}/@{out-path}/@{module-name}.swf".

  Keep-generated-actionscript = "false".

  incremental = "true".

  Debug="@{debug}.

  fork = "true".

  optimize = "false".

  Size-Report="${basedir}/Reports/@{module-Name}-size_report. XML ".

  >

  and my ModuleConfig file:

  http://www.Adobe.com/2006/flex-config">

  fake

  true

  flash.fonts.JREFontManager

  flash.fonts.BatikFontManager

  flash.fonts.AFEFontManager

  flash.fonts.CFFFontManager

  ${basedir} / src/locale / {local}

  ${basedir} / src

  true

  ${FLEX_HOME}frameworks/themes/Spark/spark.css

  http://ns.Adobe.com/MXML/2009

  ${FLEX_HOME} frames/mxml-2009 - manifest.xml

  Library://ns.Adobe.com/Flex/spark

  Frames/spark - manifest.xml ${FLEX_HOME}

  Library://ns.Adobe.com/Flex/MX

  Frames/mx - manifest.xml ${FLEX_HOME}

  http://www.Adobe.com/2006/MXML

  Frames/mxml - manifest.xml ${FLEX_HOME}

  Managers or the locale ${FLEX_HOME} / {local}

  ${FLEX_HOME}frameworks/libs/rpc.swc

  ${FLEX_HOME}frameworks/libs/osmf.swc

  ${FLEX_HOME}frameworks/libs/spark.swc

  ${FLEX_HOME}frameworks/libs/charts.swc

  ${FLEX_HOME}frameworks/libs/framework.swc

  ${FLEX_HOME}frameworks/libs/spark_dmv.swc

  ${FLEX_HOME}frameworks/libs/sparkskins.swc

  ${FLEX_HOME}frameworks/libs/textLayout.swc

  ${FLEX_HOME}frameworks/libs/advancedgrids.swc

  ${FLEX_HOME}frameworks/libs/authoringsupport.swc

  ${FLEX_HOME}frameworks/libs/flash-integration.swc

  ${FLEX_HOME}frameworks/libs/mx/mx.swc

  -owners libs - redacted-

  ${FLEX_HOME}frameworks/libs/player/10.2/playerglobal.swc

  en_US

  es_ES

  en_US

  IT_IT

  10.2

  11

  fake

  ${FLEX_HOME}frameworks/libs/framework.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/framework_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  framework_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/textLayout.swc

  http://fpdownload.Adobe.com/pub/SWZ/tlf/2.0.0.232/textLayout_2.0.0.232.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  textLayout_2.0.0.232.swz

  ${FLEX_HOME}frameworks/libs/osmf.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/osmf_1.0.0.16316.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  osmf_1.0.0.16316.SWZ

  ${FLEX_HOME}frameworks/libs/spark.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/spark_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  spark_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/sparkskins.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/sparkskins_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  sparkskins_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/rpc.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/rpc_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  rpc_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/charts.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/charts_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  charts_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/spark_dmv.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/spark_dmv_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  spark_dmv_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/mx/mx.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/MX_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  MX_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/advancedgrids.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/advancedgrids_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  advancedgrids_4.5.1.21328.SWZ

  ${APP_ROOT}/src/@{module-package}/@{module-name}.mxml

  ${DEPLOY_DIR}/@{out-path}/@{module-name}.swf

• Why 'byte b = 0xaa' fail to compile?

  Why "int I = 0xaaaaaaaa;" is compiled successfully, and that "byte b = 0xaa;" fail?

  Kayaman wrote:
  0xAA is an int.
  You need

  byte b = (byte)0xAA;
  

  And yet it works:

  byte b1 = 0x00;
  byte b2 = 0x01;
  byte b3 = 0x7F;
  byte b4 = 0xFFFFFFFF;
  

  But it does not work:

  byte b5 = 0x80;
  byte b6 = 0xFF;
  

  The reason is not just that 0xAA is an int. 0xAA is an int that is outside the range of bytes

  // ok
  byte b1 = 0x00; // 0
  byte b2 = 0x01; // 1
  byte b3 = 0x7F; // 127
  byte b4 = 0xFFFFFFFF; // -1
  
  // error
  byte b5 = 0x80; // 128
  byte b6 = 0xFF; // 255
  byte b7 = 0xAA; // 170
  

  0, 1, 127 and -1 are all valid byte values, but 128 and 255 170 are not. We must therefore go up, and explicitly tell the compiler, ' Yes, I really want to store this value that does not fit in a byte, so to be less specific and changing the digital value.»

  Edited by: jverd February 16, 2012 08:18

• Error: "SWF failed to compile.

  I am currently working on the update from an old file CP4. While I can open and save the file in CP5 and CP5.5, I can't get a preview in browser or publish the file. Instead, I get the error "Swf compilation failed. "Note: Please check if one of the actionscript keywords is used as a variable user name / '.

  
  After reviewing some of the elements of the discussion on the forum, I have tried some fixes, but without success. The project does not contain:

  • Double quotes anywhere in the name or information about the project
  • User variables

  I also tried to remove areas of text input, but it does not solve the problem either. Curiously, I had several separate projects to update, and the only one has this problem. He won't let me update the file.

  Any help on how I can update and publish the file is appreciated.

  Hello

  Welcome to the Adobe Forums.

  Tried to copy and paste all the slide of this project to an empty project?

  Note: If the steps above do not work, try this:

  (1) copy 5 slides and publish

  (2) if release is successful, try another 5 and republish

  In the following steps, you will find the slide that has problem.

  Thank you

  Vikram

• failed to compile

  Hello

  I want to develop an application of FPGA in order to acquire a temperature signal.

  I use a compact Rio 9012 and 9122, with labview 8.5 module and module FPGA 8.5

  I have an error in my compilation.

  I join a copy of my mistake and my VI.

  Thank you for your help

  Alexis

  Hi Alexis,.

  Good afternoon and I hope that your well today.

  Thanks for your posting on the Forum of NOR.

  I looked in your question and code. I found a few previous service requests where users have the same error as you. Resolutions were along the lines of re-setup from LabVIEW FPGA and to make a COMPLETE software reinstallation of NOR. So with this information I suggest first by performing a repair from the Control Panel, if no luck then reinstall FPGA and maybe if no joy then consider the relocation of LabVIEW.

  It seems that one of the directories in FPGA data is missing.

  Hope this helps,

• ICB fail to compile in release mode

  I get linker errors when I try to compile or build a project in Release mode. In debug mode, the compilation and build works very well. Any ideas?

  Reference Dell E6410

  OS = XP

  don't not using Release64 or Debug64 still...

  ChipB

  An Opperator error... Fixed but do not know what caused it.

  See you soon!

  ChipB

• Failed to compile SWF. How does it evolve?

  What causes this problem "compiling Swf doesn't have a Note: Please check if one of the actionscript keywords is used as a variable user name."

  I work at 8 Captivate and have already tried updating the INI file (not give me access to save or save on it). Addressed the issue of the 'space' as well. Have had no problem publish this file before. Made a change to the audio and now this error keeps popping up. I renamed the file and tried to publish. No luck.

  Here are some basic troubleshooting tips:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/basic-troubleshooting-tech wheat

  I suggest you try the suggested process of elimination to find out if there is a particular slide, causing the failure of the publication.  It could also be that you have chosen somehow inadvertently name an object or a slide in your project by using one of the 150 or reserved keywords that Adobe must use in the underlying code of Captivate.  So you have to go back the actions you performed before what is going on has begun and ask yourself if you have added an item or renamed something.  This could be the problem. (Include names of variables and advanced actions in this.)

• WS TP fails to compile the kernel 3.10.0 - 0-generic [SOLVED]

  Host: Ubuntu 13.10 kernel 3.10.0 - 0-generic

  VMware modules fail to rely on this core

  The end of the vmware Installer log

  2013-06-28 01:56:35, 080] stop VMware services:
  Demon of authentication makes VMware
  VM communication interface socket family is
  Virtual machine communication interface is
  Virtual machine monitor makes
  File system is blocking

  [2013-06-28 01:56:35, 542] Starting VMware services:
  Virtual machine monitor failed
  Virtual machine communication interface is
  VM communication interface socket family is
  File system is blocking
  Virtual Ethernet failed
  Demon of authentication makes VMware

  The vmware Installer full log attached as a .tar file.

  Kernel engineers can work on that?  Guess it must be done before the final release, but it would be much sooner.

  There is a patch for the kernel rc 3.10 posted WS 9.0.2 forum but the author (if I read him correctly) seems to say that he didn't need the vmblock module which does not work for me.

  Follow thisL

  https://wiki.archlinux.org/index.php/VMware

  Host: Ubuntu 13.10 Kernel (sallets) 3.10.0 - 2-generic

  Client: Windows 8 x 65

  Comments have VMware Tools installed and has been fully patched.