VI web access error

Similar Questions

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• Internal error Windows 8.1 has occurred when using web access

  I've recently updated mij PC to Windows 8.1.

  When I connect our departure from en Portal Web Access request I get the following error: internal error occurred.

  Details:

  OS: Windows 81. x 64

  Connector version: 8.0.1186 from the fix 271675

  I was wondering if there is a work around for this problem?

  Concerning

  Misha

  Hello

  Not bad at all. I'm happy to get it out to you guys.

  Looks like Michel has just blogged about this too, which means that he is now on our main Web site and can be downloaded on https://support.quest.com/SolutionDetail.aspx?id=SOL115599 where everyone is after him.

  Thank you, Andrew.

• Firefox hangs with Outlook Web Access. Is there a problem with Quicktime or Firefox?

  When I've upgraded to Firefox 4.0, I had this problem as well and restored to 3.6. Then I upgraded to 5.0, it had been fixed, hope, but nothing helped.
  I'm on a Mac (snow leopard), and the problem occurs usually when I try to access my work email (Outlook Web Access). I get a box telling me that I have to update some Quicktime components, but never what says. (And my installation of Quicktime seems to be up-to-date.) He sometimes will allow me to ignore the error, but most of the time that it just hangs.

  I asked my service provider and he has a solution. Apparently, the format of the audio file, OWA sends in the notification of receipt of a new message is not understood by the default quicktime plugin. A work around is to disable the option to have a sound played upon receipt of new messages ('play a sound when new items'). It can be found under Options | Settings, mail tab.

  If we can know just what audio format is used by OWA, it would be possible to determine the good plugin and have the option active once again, without accidents or redirects.

  See you soon!

• Web access Runtime

  Hi all

  I have a project that I made an exe file and posted on another computer.  When I run the exe I get the front running and can be accessed using the address of the site.  The problem I have is that I can't order the plate via the website.  If I try to request control of vi that I denied and error that displays on the runtime computer says that the request has been denied and to check the permissions.  I've been everywhere wherever I can think and I do not see where to put all the permissions on the pc of runtime.  When I'm on the pc runtime app works correctly but not web access.  Everything works fine on the pc of non-existent with the web and front panels.  Is it possible to take control of a Web site that is hosted by a unit of execution?

  I figured this out.

• Invalid connection file (vWorkspace Web Access)

  We receive the following error message on each first launch of an office published in vWorkspace Web Access

  

  On every second try the error will not occur.

  What could be the problem here? We lack vWorkspace 8.0 MR1

  We stumbled on this article: https://support.software.dell.com/vworkspace/kb/94234

  We have removed all special characters from the name of the application and name complete, but says not helped.

  Any help would be appreciated!

  Solve this problem using this post > http://en.community.dell.com/techcenter/virtualization/vworkspace/f/4827/t/19557970

  "

  The solution was to change according to the value of "true" to "false" in the web.config file in the inetpub directory

  Path: C:\inetpub\wwwroot\\web.config

  
  
  
   
     
     
     
     
     
     
     
     

  "

• Verification email of site blackBerry Smartphones that use Outlook Web Access Lite

  I just got a Blackberry 8330 and the need to use it for the electronic control of my company's e-mail server.

  It turns out that this server uses Outlook Web Access lite. I am currently not able to check the mail that I am

  get errors saying that the browser must accept cookies. Also something about scripting.

  Does anyone know how to get around this problem?

  I don't want to 'integrate' this email account and I get messages pushed to Blackberry - only to be able to

  access the site of the email and check email.

  Solutions please!

  Hi and welcome to the Forums!

  It actually maybe not a cookie issue... since I access OWA as you wish (I integrate via BIS... very slippery!), I can only guess.

  In the browser, click on the BBKey and select Options. There is a ton of different options, including one that allows your browser to BB identify on a website in IE, FF or BB... being the default, of course, BB. If you change IE, you might have more luck. This setting is located in the screen of Configuration of the browser and is usually called the browser Identification.

  There are also many other settings that may be useful... basically, you need to tinker with them until you find a combination that works for your particular situation. But I would try the browser ID/emulation first.

  See you soon!

• BlackBerry Smartphones Microsoft Outlook Web Access 2003

  I just buy a new curve, and if I understand correctly, I can implement to receive emails through my Outlook Web Access 2003, however, for some reason, I get a message that says "an error occurred during validation of the email account.  Please check your data and try again"I checked all of my information and I get the same message in my outlook inbox saying that the attempt failed.  I'm missing something here, do I need additional software, etc.?  I know that when I go on my Outlook Web Access site, there always seems to be a problem with the authentication of the certificate, which would have something to do with it?

  chk if this can help:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02858&sliceId=SAL_Pub...

• VMware Virtual Infrastructure Web Access won't start not

  Hi all

  I'm a little puzzled. Yesterday my vmware server 2 was working fine, but today it does simply not at all. Or rather vmware server seems to work, but web access won't start so I can't access it.

  I created a log of errors of the problem by changing the start of web access line in vmware-mgmt to send the log to a file instead of dev/null and the result which is attached to the file. I can't make heads or tails of it, but I hope someone can help me. I have re-installedvmware Server 2 times, but it does not help.

  The host is under ubuntu 9.04 and the guest is windows xp. As I said, everything worked without problem yesterday, but today it won't work/start.

  Hoping that someone will know what to do!

  Hello

  Perhaps with the failure, vmware server became unstable. Then put back in place a clean vmware server is necessary.

  To do this, all you need is to run ' vmware - uninstall.pl ' and then do a clean install using the script that I told you.

  Remove it and install check is all vmware remains of zombie process in running and kill them.

  You will not lose the virtual machine, but are always a good idea to make a backup. During the installation of vmware server all you need is pointing to the directory containing the files of the virtual machine.

  If you have problems with vmware vmware hostd.log and/var/log/vmware proxy.log after install the own reach and we will check.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• VSphere from VMware vCenter Server Web Access from the Internet

  I tested VMware vSphere (ESX 4) and tried to connect to the internet for the Web Admin Access VM only.  I can connect the vCenter Server (on Windows) http Web Access features and manage the configuration of all virtual machines. But when I try to connect to an actual vm via MKS, I get an error MKS as ' unable to connect to the MKS: unable to connect to the xxx.xxx.xxx.xxx:902 server.»  The xxx.xxx.xxx.xxx is the IP address of the ESX Server HOST and not the Server vCenter (which administers the host).   I have ports 80, 443, 902 and 903, on the firewall, open to point to the server vCenter Server.  When I'm on the LAN, I can do everything without a problem. Its only when I try to connect directly from the internet through our firewall I get the above error.

  Someone at - it suggestions?

  Andrej770,

  vCenter Server transfers you to the ESX host hosting the virtual machine, and the remote console runs on port 902.

  You want to go directly to the ESX host on port 902 through the firewall to connect to the Virtual Machine console.

  You want to see the pages "Guide de Configuration ESX" 146 for more information.

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_esx_server_config.PDF

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Cannot access the virtual center with web access

  Hello

  I can access my ESX hosts without problem using web access but I can't access the virtual Center.

  I put https://hostnamevCenter

  I go as far as the home page and once I click on web access connection I get the following error:

  '503 service unavailable '.

  Any suggestions? Is web access configured automatically for vCenter or what I need to do something more?

  Thanks in advance

  Hello

  Check this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1009291

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Prakash

• Cannot add permissions for users Active Directory - the directory access error

  Hi all

  VCenter, connected as long as user with administrator privileges on the server, Active Directory running I am can be used to add permissions for domain accounts and just get errors:

  Right-click on the data center & gt; Add authorization & gt; Select read-only & gt; Add users and groups & gt; Select the domain & gt; (the list is NOT populated with users)

  Among users, enter my account of user AD & gt; Click on check names & gt; "The following names are not found: xxx".

  Enter the AD user account in the search box & gt; Click Search & gt; "A general system error occurred: directory access error.

  The only son I can find or KB articles relate to the modification of the period of Active Directory.  I did, but it did not help.

  http://communities.VMware.com/thread/14150

  http://KB.VMware.com/kb/1010094

  Any ideas why I can't delegate permissions? I do not think we have group policies that are resticting access, but I don't know which of the log files I should I seek to find the real problem.

  Thank you

  Kevin

  Windows Server 2003 R2 Standard Edition, vSphere Client 4.0.0 build 162856, vCenter Server 4.0.0 build 162856, ESXi 4.0.0 build 181792

  The problem that I had was related to what service vCenter services were running as.  No doubt during the installation (for some reason that escapes me now) I had configured the VMware VirtualCenter Server and VMware VirtualCenter Management Web services run under the local administrator account.  Change these so they ran as system Local solved the problem, and then I have a list of domain users and assign them permissions.

  Kevin

• Overview of the plugin performance without Web access?

  It seems that the plugin install.bat overview of performance (for VirtualCenter 2.5 update 4) requires the installation of the VMware Infrastructure Web Access function.

  This plug-in works with the VI Client? If so, is there a way to install and use the plugin without access installed Web?

  the plugin works in the VI Client, but it works like a plugin of vCenter.  So, therefore depends on the Internet access service.  I don't know inside and on how the plugin works, but if the Internet access service does not work when you try to go to the tab overview of performance, it will be just error.

• FDM data access error

  Experts, I am trying to delete a period in control of FDM 9.3.1.2 tables, but it gives an error: "error to remove folder. "Detail: data access error. In the log file, I find the following error messages for this action.
  
  * Start the journal entry for the Runtime Error FDM [2011-07-28-15:25:19] *.
  -------------------------------------------------------------
  ERROR:
  Code...-2147217913
  Description... ORA-01843: not one month valid
  SELECT * FROM tPOVPeriod WHERE (PeriodKey = '' 2008-30-11)
  Process... clsDataAccess.farsKeySet
  The component... upsWDataWindowDM
  Version...................................... 931
  Thread....................................... 10804
  * Start the journal entry for the Runtime Error FDM [2011-07-28-15:25:19] *.
  -------------------------------------------------------------
  ERROR:
  Code...-2147217913
  Description... Data access error.
  Process... clsSQLUpdateMgr.fPOVPeriod
  The component... upsWObjectsDM
  Version...................................... 931
  Thread....................................... 10804
  
  The error message indicates the period during which I tried to remove it, but I'm still not able to remove it. It's strange, as this production application was working fine until a return of the month and the development of application works very well with this action. Experts, let me know how this can be resolved.

  Most likely possibility that I can see (although I can't explain why it happened) that would be:

  #1-the format of date and time settings are different between the database server and the server WEB/FDM. A server might think date should be in the mm-dd-yyyy format while the other waits aaaa-mm-jj. If you have access to the database, you should be able to confirm this. The 64K question would be why would be a question at random as it should influence a lot of things?

  Another possibility would be for the period swelled in question, the value stored in the DB does not match the value of this request. Maybe a white space or something else was annexed to the date and request failed with no result that generated the error. A quick glance in this database table would quickly confirm this. I doubt that is the issue because of the specifitivity of the error message.

• Synchronization with Outlook Web Access

  I recently installed Thunderbird to access the professional email using Outlook Web Access. When I move a message in Thunderbird to a folder, I see that he is still in the Inbox in Outlook. There must be a setting of synchronization that I'm missing. Help is very appreciated.

  Lets see. OWA is not IMAP. You can access the exchange e-mail via OWA. Either using davmail or the add-on exequilla.

  The implementation of IMAP in Exchange is odd. This is mainly because that Microsoft never intended anyone to use effectively, but supported marketing needed to be able to tell. So you have Mail.imap.expunge_after_delete set to true and restart Thunderbird.

  Many parameters that have no user interface are read at the start of the program.