video capture card

Similar Questions

• My video capture card do not SP3. How do I go back to SP2? It is running XP

  I need to go back to SP2 to SP3 for my video capture card to work properly.  How can I do this?  The operating system is Windows XP Home Edition Build 2600.

  Support for WinXP SP2 ended July 13, 2010. You don't want to "roll back to SP2," you want to install a new "video capture card" or update the drivers for the card currently installed.

  If you need help, please start your own, new thread in the forum WinXP Hardware: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware

• What video capture cards work with Media Center?

  I use Windows 7 Media Center and I content HD through DirecTV, my system has STB (2) with outputs HDMI (outputs of the component also), I want to know who (2) video capture cards work with Media Center as would make a key pair?

  It seems that MCE works with the capture card (1), but not two...

  Help, please...

  Saturday, December 20, 2014 08:46:27 + 0000, RonaldPeterson wrote:
   
  > I use Windows 7 Media Center and I content HD through DirecTV, my system has STB (2) with outputs HDMI (outputs of the component also), I want to know who (2) video capture cards work with Media Center as would make a key pair?
  >>
  >>
  >>
  > It seems that MCE works with the capture card (1), but not two...
   
  Try posting this question at the http://thegreenbutton.tv - Media Center has been
  designed to work with the tuners for television recording, but the people he could have
  a few ideas.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Trident video capture card connected via USB 2 not working not properly under XP

  I use a Trident card connected via USB 2.0 video capture and I had a weird behavior:

  -sometimes not detected (not included in the list of devices)

  -sometimes not recognized (unknown device)

  -sometimes not start (Code 10)

  -sometimes works very well

  I used a USB Tracker to study the issue and found out that the usbehci driver is not able to activate the USB port.

  The message sequence is as follows (when it works):

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is enabled

  This is when it does not work:

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is NOT enabled

  Function Clear (4) Port, connect to state change - success

  Get the status of the Port (4) - success

  Serial Port (4) feature, reset the change - success

  I have more tracks, but I don't know if this is the right place to post.

  Thank you in advance to anyone willing to help me.

  Sincerely

  Andrea

  * original title - device USB not recognized or not started or sometimes work *.

  This link might be useful for:

  Advanced troubleshooting tips for General USB for Windows XP problems

• Digitus high video capture card. non trovo the compatibility con 7

  He programma di video rental: analog-digital, non funziona knew questa versione di computer (7).  MI asks kindly pack 4 di?

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto: (IT)

  Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link below: (Portuguese)

• Windows 7 driver for video Capture/TV Tunner card

  Is there a Windows 7 driver for the video capture card TV Tuner HP P/N 5188-7344?

  Hello Thirdsmith, I read on another Forum that the Member had the same card that was in his system, the same model as your number and it installed in another system with Windows 7 x 64, went on the Windows Update site and the device was found and drivers downloaded and installed for the Asus NT SC/ATSC TV card.

  I can't check this, since I have no personal experience with this TV card.

  Just some thoughts.

• video capture for a1340n card

  Hello!

  Any suggestions on a video capture card for a computer Media Center "a1340?

  Thank you.

  Rafael

  Need a product like Roxio Easy VHS to DVD.  If comes with an adapter USB to connect to your output video and audio as well as the software. Buy directly from Roxio gives you a 30-day refund window.

  I think that the version of Roxio Creator 2010 IS also has the same card but includes more features with the software.  You can buy this 'special edition' version to the SAM Club' has or Costco.

• capture card specifications

  What specifications must be met for an image / video capture card, as I know it works with Labview?

  Thank you.

  Are you referring to an acquisition of a camera card? If you want to know if an acquisition card non - OR can be used with Labview, see this KB: I can use third party My Frame Grabber with the screws IMAQ?

• Aero Glass problem? saved only in black and white video acquisition card: clolour sceme changed temporarily Aero in Vista Basic: I have Vista home premium, 32-bit

  video capture card via USB to the PC... everything works but only in black and white and info: perpetual sceme changed temporarily Aero in Vista Basic:

  What is the reason why it is black and white?

  .. and if so: how to change? I have Vista home premium, 32-bit system (PC bought in 2007)

  can anyone help?

  Hans

  Hello

  1 have had any changes made on the computer before the show?

  2. who is the manufacturer of the video capture card?

  3. If it works well before?

  4 is the issue limited to the video capture card?

  Method 1:

  Check the link and see if it helps:

  Solve problems with Windows Aero

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  Method 2:

  I suggest also refer to article and change the theme:

  Change desktop theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Method 3:

  I would also suggest update you the graphics drivers on the computer and check if the problem persists.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• This is a video capture device?

  Anyone know what it is? It came with a workstation about 5 years ago. I was under the impression that it is a video capture device, but I don't understand why there is a vga (?) connector on the end. Or I guess it's a connector series 15-pin. How can you "entry" for a video card? What do you give him? I suppose it could simply convert entered composite/s-video for a serial output, which then connects to a real video capture card. Isn't it? Video capture devices do not have their own composite entries?

  If it is in fact a video capture device, is there a manual for this? How to use it? Is it good?

  

  Thank you

  -Ron King

  
  

• Satellite Pro A60 video Capture problems

  I have the following system:

  Toshiba A60 laptop Pro satellite
  CPU - AMD 2.8 Ghz
  RAM - 768 MB
  OS - XP Pro SP2

  All other system requirements as indicated by the Dazzle DVC90 USB 2.0 capture card are met.

  I use Pinnacle Studio 9.4 update to capture VCR.

  Problem:

  When I plug the DVC90 to my laptop, I get nothing on the preview window. I have it set to capture as quality DVD Mpeg. But I don't see a gray screen when I look at the overview. I click start capture, the timer starts but no capture is made, either by audio or video.

  I checked all the settings. They all seem to be fine. My friend tried the capture card USB with exactly the same settings and connection on his desktop PC and it worked perfectly. The specification of his PC is similar to my laptop. Is it a familiar fault with video capture on laptops?

  I'd appreciate it if someone could help me with these problems.

  Thank you very much

  Alex

  Hi Alex,

  Have you checked in your Pinnacle capture settings that is not failing to the incorrect entry (rather than Composite, S-video). Obviously the value specified must match your connectivity of material allowing to receive a video signal.

  I think that it is also possible to disable the capture preview screen to minimize the risk of frame drops. Please check that you have the active video preview.

  HTH

• LabVIEW compatible capture card

  Hello

  A few weeks ago, I ordered a PCI 4 x 4 of the German company Phytec acquisition card. When they were not yet convinced me to buy the thing, they told me how this card works with LabVIEW and that there are many example of screw when I tried to use the card in LabVIEW I failed so I contacted support Phytec.

  Support emails we exchanged has been one for the Gallery:

  I told her that my capture card does not work with LabVIEW.

  He said, LabVIEW is not supported.

  I: but I have a few screws that are supposed to work

  Him: Where do you have them?

  I: it * link *.

  Him: LabVIEW is not supported more we have cleared all the screws on the server.

  I'm sorry that my ranting is a bit out of place.

  Here's the point:

  I'm looking for a (PCI or PCIe) frame grabber card, with which I can receive signals from 4 cameras analog-connected via cinch directly in LabVIEW. I don't like how it works, it should just work in LV 2010. I have a full bachelor including NI Vision.

  So far, I have these cards:

  Matrix Vision Sigma

  They told me, they had a driver that works with LabVIEW 6.1. I told them that this could be a problem, but they did not quite understand why. They said that it would work very well, but I have heard this before. The good thing is we can put videos together split on the equipment screen. And I can send it back, if it does not work. But I can't even imagine what will make my deadline.

  The imaging source

  According to this thread the imaging source hoarders have worked with LabVIEW.

  Falcon ID

  I haven't heard back from them yet.

  What do you think of these? Have you had any experience with them or any other card acquisition which can handle 4 cameras? Do you have any other suggestions? Have the cameras in support for work in LabVIEW?

  Thanks for any suggestions.

  I have used several maps source of imagery in LabVIEW, but using an ActiveX interface.  No problems.  I am 12 years old and + 4-channel PCIe cards you are watching.  I only got one with a bad channel.  I use videoCapX from fathsoft.com that has several options that didn't IMAQdx for AVI recording directly from the device.

  Good luck.

• Video Capture problems

  I have a problem of capture video analog (composite connections). I have a new Gateway LX6810 PC.  He dad 8 Gig of ram, Vista home premium 64-bit and an Avermedia M791 PCIe Combo card.  I installed the latest drivers for the acquisition card and the latest updates for Arcsoft Showbiz DVD2. When I try to capture analog video, I get an error screen stating "device is not available or is being used by another application.  If I try to install Media Center, which I don't want to use it see the composite connection and get a preview of the video.

  How can I get rid of the error and use the compsite connections to capture video from a VCR?

  Thank you

  I did the ' startup clena process.  Ended up having non-microsoft services disabled and cannot yet capture video.

  I think it is perhaps time to research and buy a new capture card that is 100% capatible with Vista Home Premium 64-bit OS.

  I appreciate your time to try to help to solve this problem.

  Curt

• S - Video capture with Premiere Elements

  I've been using Premiere Pro 2 for some time and have always been able to capture video from my Sky Box or video recorder with my Matrox RTX100 card using the s-video inputs.

  I recently bought a camera with HD (Sony NEX-5) capabilities and purchased Premiere Elements because my old PP2 will not recognize HD.

  PE does not recognize my Matrox card, so I can not download any more.

  Does anyone know how to download EP from a VCR or a TV?

  Thank you.

  In general, I find it better to download/video capture in a file using the application of origin for each device and do not use PE9 to capture.

  I have an old camera to DV tape and a strong memory HD camera and use different software supplied with each camera to create the files on my hard drive.

  The old tapes Sony DV SD camera has a video input which is ideal for capturing composite video VCR in AVI format.   The Sony software debtor can capture live directly from the tape using firewire, as he does not know if the DV tape or VCR plays.

  Only so I use these files in PE9 and I never hurt to mix .h2ts and. AVI formats.

  You must keep the original software that is most appropriate for your capture device (unless PE2 does a better job anyway).

• H.264 capture card edition

  Hello

  I know that the standard flow of publication for DVR live is:

  Capture card (raw video sample) > > > > > > GFFE > > > > > > FMS

  The problem is, the output of the sample capture card video raw format and the GFFE do the job of coding. It increases the processor load.

  I think it is:

  Some capture cards do not support DirectShow output filter, but it provides a native interface to get the card H.264 encoding.

  Acquisition card can encode the video in H.264 by clips on the map and there is no cost on CPU

  Then, if I can publish the H.264 encoded card for FMS in my program.  which will not increase the CPU load.

  Capture card (H.264) > > > > > > My App > > > > > > > FMS

  How to send frames H.264 to FMS?

  Open a video channel, then send that H.264 images one by one?

  And which client / library if I use?

  Adobe RTMP SDK, how much does the permit cost? my project is just a tiny and we cannot pay a lot on it.

  Then the only choice is RTMPClient Red5?

  Thank you

  Yes, you will need to send data to FMS via RTMP - so you should use RTMP SDK for it. I don't know a lot about customer Red5.

  With regard to cost of RTMP SDK is concerned - again I don't have the data, but I can ask someone to contact you if you are really interested. In this case drop in mail me at [email protected] with your details