video capture

Similar Questions

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• SHOWBIZ DVD 2 analog video capture on my E10

  ShowBiz DVD 2 analog video capture on my E10.

  Stu

  Eric, I really don t understand you. First Movie Maker is part of the Microsoft software and you get it with Windows XP. What producer can do is to test it with own product. I'm sure you know that Movie Maker is developed for editing movies and not for recording of TV programs. WinDVD creator is also very good for editing movies.

  Second, you cannot say that you cannot save your favorite TV channel. This function is also integrated into WMC. If you don't like it, or you are not satisfied, you must look for the best solution.

  The same thing has been with me. I was not satisfied with the program to burn and I bought a new one with more options.

  Good bye

• Satellite Pro A60 video Capture problems

  I have the following system:

  Toshiba A60 laptop Pro satellite
  CPU - AMD 2.8 Ghz
  RAM - 768 MB
  OS - XP Pro SP2

  All other system requirements as indicated by the Dazzle DVC90 USB 2.0 capture card are met.

  I use Pinnacle Studio 9.4 update to capture VCR.

  Problem:

  When I plug the DVC90 to my laptop, I get nothing on the preview window. I have it set to capture as quality DVD Mpeg. But I don't see a gray screen when I look at the overview. I click start capture, the timer starts but no capture is made, either by audio or video.

  I checked all the settings. They all seem to be fine. My friend tried the capture card USB with exactly the same settings and connection on his desktop PC and it worked perfectly. The specification of his PC is similar to my laptop. Is it a familiar fault with video capture on laptops?

  I'd appreciate it if someone could help me with these problems.

  Thank you very much

  Alex

  Hi Alex,

  Have you checked in your Pinnacle capture settings that is not failing to the incorrect entry (rather than Composite, S-video). Obviously the value specified must match your connectivity of material allowing to receive a video signal.

  I think that it is also possible to disable the capture preview screen to minimize the risk of frame drops. Please check that you have the active video preview.

  HTH

• Satellite Pro L300 - no video capture hardware

  Hi all, I'm new to the Forum so apologize me if this question has already been answered previously.

  I am trying to connect a USB Webcam to my Satellite Pro L300-153. Wizard installs the webcam and updates the drivers etc, but trying to work webcam a mistake happens "* webcam works not properly no video capture hardware detected."

  Can someone advise please. Thanks for your help.

  Hey Buddy,

  In my opinion, you must contact the manufacturing of this USB webcam. I put t know which model you have, etc. and there it s a Toshiba forum so I think that no one can tell you if it s associated with driver problem or camera itself.

  But I put t understand why do you use an external webcam. AFAIK all Satellite L300 are equipped with internal webcam

• Qosmio G10 video capture analog.

  Help, please!

  Is someone can help me find a way to run analog video capture on a Qosmio?
  I need to transfer a lot of analog video from a camcorder, I tried winDvd, Moviemaker, I installed Magic Video Deluxe Pinnacle Studio 9 version complete, but it seems that no one of these software is able to recognize and capture the video source. Only the digital acquisition is OK. It's very frustrating!

  Thank you very much
  Massimo

  Hi, I have also just spent the last two hours trying to capture video from my analog camera. I can't understand how to do that either. I can watch the video on my screen to switch signals with Fn + 4, but I can't access the video signal via any software.

  Has anyone else got this yet understood problem?

• Video capture with Equim M70 problem

  Can someone please?
  I installed vista on my Equium M70 and now when I connect my camcorder to the laptop and try to capture a video, he said:
  "No video capture driver installed, cannot build the preview graph.
  Where can I find the driver or is there something else I need to install?

  Hello

  Can you please tell me how cam you have exactly? What happens when you connect your webcam for laptop and turn it on? Cam is properly recognized by the operating system or the error message occurs in the software you use for video capture (Vdeostudio 10plus)?

• video capture card

  We would use a video streaming with our new Compaq Elite 8300 SFF.  Which video capture card are recommended for this model?

  You can try the following cards:

  • AMD Radeon HD 6350 (512 MB)
  • AMD Radeon HD 7450 (1 GB)
  • NVIDIA NVS 300 (512 MB)
  • NVIDIA NVS 310 (512 MB)

  Reference: http://www8.hp.com/in/en/products/desktops/product-detail.html?oid=5232852

• Crop video captures all

  Hello gentlemen,

  For my project I undertake acquistion PPG without contact. I am trying to capture my webcam, but with all of the image, I get a lot of noise in the signal. I found using code samples provided by my supervisor in MATLAB that my webcam is capable of recording at 30 fps.

  I joined a video capture for treatment in other programs. Currently, the VI records to a text file.

  How would you suggest that I crop the video images before being caught or processed, I need this for two reasons, 1. the entire image generates noise and 2. reduce the footprint of output file.

  I have attached the VI for reference. To run a file in the file path text must be designated for the VI to run and a session for your WEBCAM.

  Regards Sean

  P.S Vision required.

  If you open your camera in MAX, there may be for the width and height properties. You can create a property on your in camera session node and to use these names as 'active' attribute, and then set the 'value' with a string or numeric.

  

• Windows 7 driver for video Capture/TV Tunner card

  Is there a Windows 7 driver for the video capture card TV Tuner HP P/N 5188-7344?

  Hello Thirdsmith, I read on another Forum that the Member had the same card that was in his system, the same model as your number and it installed in another system with Windows 7 x 64, went on the Windows Update site and the device was found and drivers downloaded and installed for the Asus NT SC/ATSC TV card.

  I can't check this, since I have no personal experience with this TV card.

  Just some thoughts.

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• video capture for a1340n card

  Hello!

  Any suggestions on a video capture card for a computer Media Center "a1340?

  Thank you.

  Rafael

  Need a product like Roxio Easy VHS to DVD.  If comes with an adapter USB to connect to your output video and audio as well as the software. Buy directly from Roxio gives you a 30-day refund window.

  I think that the version of Roxio Creator 2010 IS also has the same card but includes more features with the software.  You can buy this 'special edition' version to the SAM Club' has or Costco.

• I need a driver for my video capture easycap 2.0 and when I tell windows to watch it comes empty-handed.

  Original title: device driver

  I need a driver for my video capture easycap 2.0 and when I say windows to watch returns bogus empty hand someone point me in the right direction

  also, it came with some software that turned out be corrupted and now I can't get rid its not to damage any of my other systems but I Winery a disk with the same program and its not the corruption but woulnt read because of the bad files already in place have to I do?

  Hi Piccolo1234,

  ·         What operating system is installed on your computer?

  ·         Exactly how are you Windows asking you to update the drivers for the device?

  You can check if the device is getting recognized in Device Manager. To follow if the article:

  a. click Start, and then Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  c. open the Device Manager and locate the device, right-click the device and click update drivers.

  Try this and let us know the results.

• movie maker error: a video capture devices are not detected

  Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.

  What is it?

  How is it connected?

  Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.

  This device and cable worked before?

  If so, what was the alst time and have you made any changes to the computer since then?

• Trident video capture card connected via USB 2 not working not properly under XP

  I use a Trident card connected via USB 2.0 video capture and I had a weird behavior:

  -sometimes not detected (not included in the list of devices)

  -sometimes not recognized (unknown device)

  -sometimes not start (Code 10)

  -sometimes works very well

  I used a USB Tracker to study the issue and found out that the usbehci driver is not able to activate the USB port.

  The message sequence is as follows (when it works):

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is enabled

  This is when it does not work:

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is NOT enabled

  Function Clear (4) Port, connect to state change - success

  Get the status of the Port (4) - success

  Serial Port (4) feature, reset the change - success

  I have more tracks, but I don't know if this is the right place to post.

  Thank you in advance to anyone willing to help me.

  Sincerely

  Andrea

  * original title - device USB not recognized or not started or sometimes work *.

  This link might be useful for:

  Advanced troubleshooting tips for General USB for Windows XP problems

• hardware video capture... my web cam worked fine utill today.

  From today I can not get my web cam to work. I deleted and reloaded but didn't achieve the same result "no video capture hardware" how to fix this? the program loads ok, but the message no video capture always happens... can someone give advice... Thank you

  Hello.

  Thanks for your help... Funny, that I remembered, I just did a defrag and then worked on a hunch made again last night and my cam lol sorry if I confused anyone. but I will keep the pages that has been cited just in case need

  Thanks again
  Maurice