Video opens in Quicktime, but not in PremPro CC 2015

Similar Questions

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I can't open firefox running but not responding not window opens and says to close the existing window. I can't do that the computer does nothing to help. I did all the suggestions here. I uninstalled and reinstalled firefox

  Firefox does not open. I get firefox is already running but not responding no window... I tried to restart without help. I tried to put an end to the process via Ctrl + Shift + Esc and nothing firefox is registered to complete. I tried to find the application via the icon data run in the start window, I have no icon running on this system (Acer with windows vista (?)

  This has happened

  Each time Firefox opened

  The computer was hard to close and made an incorrect scan stop when it has restarted

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

  Uninstall and re - install Firefox does not affect your personal data and settings in your Firefox profile folder, unless specifically, you select this option when Firefox un0installing - but which removes "all your personal data and customizations.

  Have you tried to create a new profile after a cold start?
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Why can I open yahoo mail but not Inbox to open? wrong security settings?

  Have re-installed XP - all * broke loose. and I installed XP literally hundreds of times. When I try to use IE8 to get yahoo mail, only the site opens, but not the Inbox. At redefining the security settings again. However: Mail works fine in Firefox; no problems. Clues?

  Hi Ronald,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you can not open the Yahoo mail inbox.

  This problem may occur if cookies or temporary files are not deleted.

  Please contact the support mail from Yahoo for assistance.

  Yahoo mail support

  Meet us if you encounter any other Windows problem, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Bridge opens Raw thumbnail but not preview?

  In Bridge, I can open the Raw files from my Canon 6 d as thumbnails, but not as the great overview. The files will be open in Camera Raw 8.1 without problem. I have Photoshop CS6 13.0 and the 5.0.0.399 bridge. I'm on a Mac Pro OS 10.8.4

  What can I do?

  Thank you Curt. Goes to the downloads and product updates, and there I found the updates for all Adobe products. clicked on the bridge for Macintosh and downloaded 5.0.2.4; for Mac and the version downloaded from CS6 13.0.4 (don't have 13.1?), then clicked on Photoshop. Everything works fine now. And I learned how to find updates from Adobe! Thanks again.

• Embedded video plays on PC but not Mac

  As the King of Siam said: "it's a surprise."

  I update a site and have incorporated a .mov from YouTube channel of the customer using the < iframe > code of YouTube favorite. Here's the URL: http://www.realcosmetics.com/ourStory.html.

  The video will play in all the browsers on my Win7 PC (Firefox, Safari, Chrome, Opera and IE which emule also IE7 and IE8). He played also on the friends PC that I asked to be tested. He will not play on any Mac where we tested the page. [FYI, the .mov file was edited on a Mac and he plays it.]

  It will play on Macs, however, of the YouTube channel. And the guy who built the integrated Facebook the same video on a tab page using the old YouTube < object > < embed > code. Test Mac have no problem playing the video of the FB page.

  So, I tried switching the old < object > < embed >. Still do not play on the Mac, so I restored the iframe code.

  Which is totally confusing, it's that I've recently embedded YouTube videos on another site using YouTube < iframe > code and the customer can play those on Macs. Both pages use the same DOCTYPE (XHTML 1.0) Transitional and the code copied from YouTube. Valid page (after I removed the allowfullscreen switch which tell W3C was not valid under the DOCTYPE).

  I searched online through forums and threads of solutions, and while I found several that seem to work for one person but not another (having to do with the evolution of the Mac preferences, etc.), none of these solutions worked on the Mac test.

  Any ideas of your wonderful gurus? The answer may be to look me in the face, but he can not see to have looked for so long. The only difference between this request and the precedent I can think is that the host servers are not the same company.

  Thank you for thinking about it!

  Chris

  You have no positioning on the DIV (s) who hold the video so your position: relative on

  is forced to sit on top of the iFrame - not allowing access to the video. Adjust the CSS for the video DIVs and DIV text and it should sort. You can test it by deleting the text of the div class - the video will play.

  Mac OSX 10.7.3

  Firefox 11.0

  EDIT: / / to correct, remove all the position: relative to the div and also the float: left. This is not required. But keep float: left in the #vidFrame only.

• jQuery Mobile - Popup doesn't open after F5, but not on the first page load

  Greetings guys,
  
  Unfortunately, there is very little documentation on how to combine the APEX 4.2 with jquery mobile components, so I hope that some geniuses here can help me.
  
  On a single page with a bunch of hole components, there is also a popup div

  <div id="myPopup" data-role="popup">
     <!-- close button, safe button, input field and short list... -->
  </div>

  He gets open with js:

    $( "#myPopup" ).popup( "open" );

  This all works well, not to mention that the face that it works as after you refresh the page!
  The page loads via js:

      $.mobile.changePage('f?p='+ $v('pFlowId') +':20:' + $v('pInstance') 
                         , { transition:"slide", reloadPage:true });

  ... who also works very well so far. Same problem, I had before when I was using a dialog instead of the pop-up box. -only show after refreshing the page.
  
  This must surely have something to do with how JQM loads and makes the page (outside the APEX-job) - a simple enough question. I also tried different ways of calling the page, without any difference to this problem. Unfortunately I'm quite new to work with JQM, so maybe someone here can help me.
  
  Thank you very much in advance,
  Best regards
  Tobi

  When you think the loading multiple pages is the issue that you can fix that by using the variable apex.gPageContext$ .

  In order to get the popup in the use of the last page / current / real: $("#myPopup",_apex.gPageContext$).popup ("open")

  Documentation says (not more and not less then):
  apex.gPageContext$-used to limit the jQuery to the active desktop or Mobile current page jQuery selectors.

• Mercury pass working in the first, but not After Effects (CC 2015)

  Hello people. Did some research on Google, but not came with something useful.

  I use a TV regular ole plugged into the HDMI port on my graphics card to production and to see my work on a larger screen, thanks to pass mercury. 2014 CC gave me no problem. Make the same settings in CC 2015 and first works like a pro, but After Effects is a no-go. I tried to ensure that the window cross the edges of the screen, try it with or without first opened, with or without "disable in the background."

  Loss - of ideas? Of qualifying questions that can help to provide more information?

  System specs

  Mac OSX 10.10.4 (early 2009 MacPro)

  2 x Quad-core 2.26
  680 2 GB GTX

  20 GB of ram

  With the help of AE in the last update

  Hi DG;

  Have you tried measures to solve the issue that helped you? If so, mention the steps you tried this number shouldn't, t come on CC 2014 or 15 on 10.10.5 and below.

  Have you tried to calibrate the seconday monitor or rename the Adobe folder in the Documents and MAC hd library > Application Support > Adobe? or tried any other HDMI and redefinition of workspaces?

  Vinay

• Why can I play a WMV video that I created, but not import it into Windows Movie Maker?

  Why do I get the error message "the file * *.wmv cannot be imported because the codec required to play the file is not installed on your computer." If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "even if I CAN play the video in Windows Media Player?

  I have a Windows Media Video file I recorded using another program. I can open the video and watch it in Windows Media Player, but when I try to import into Windows Movie Maker (as I did with the other videos I recorded), I get a message saying that it cannot be imported "because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "I tried to close Windows Movie Maker and reopening, she even tried to restart my computer, but it still does not work.

  Hello

  ·         What program did you use for recording to WMV file?

  ·         Are you having similar problem when you try to import the WMV file, which is not recorded by this program?

  Method 1:

  Although you can play a file in Microsoft Windows Media Player, you may not be able to import the file into Windows Movie Maker even though this article lists this kind of file. You will not be able to import the file if the codec that was used to encode the audio or video is not a codec that is supplied with Windows. In this case, you can re - encode the video or audio by using Windows Media Encoder, and then import the video or audio.

  To download the Windows Media Encoder, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/download/en/details.aspx?ID=8509

  http://www.Microsoft.com/download/en/search.aspx?q=Windows%20Media%20Encoder

  See also:

  Importing files into Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  Method 2:

   

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I want bookmarks to open new tabs, but not move them immediately

  When I used chrome, I could control click on bookmarks in the bookmarks bar and they would open in new tabs, but it wouldn't switch to the tab immediately (it would load it however). However, in Firefox, when you control click on bookmark, it switches automatically to the new tab. Is it possible to change this?

  I tried turning the 'Tabs' which means that the new tabs open from within a Web page are not switched on immediately, but this seems to have no effect on the bookmarks.

  Hello alexthegreat7, if you please, try the following:
  enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.tabs.loadBookmarksInBackground. Double-click it and change its realvalue, then Favorites should not receive focus immediately when you click or Ctrl-click on them...

• video slows down after watching several videos on Win 7 but not XP

  I only saw several videos one at a time on Xhamster.com , but after a few videos on the quad Win 7 system, they slow down to no visible (not buffering problem, put in continuous buffer), then after about 30 minutes to an hour, they go back to normal. This does not happen on my quad XP system. If I restart Firefox after that it works normally, I go through the same problem as on the quadruple Win 7 system.

  I think I took the easy way. I just uninstall Firefox and then downloaded and reinstalled and everything just to add Video DownloadHelper. It seems to have worked. I just did an extended test and do not slow down the.

• El Capitan open Photoshop CS4, but not Bridge CS4

  Have tried to open Bridge in El Capitan of applications and also 'browse them in Bridge' of Photoshop CS4, but bridge keeps crashing. I know that CS4 is getting old, but if PhotoShop CS4 works, why not fill... suggestions welcomed.

  Try and update the Camera raw for CS4 Bridge

  Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Camera Raw 5.7 update

  Windows: Adobe - Photoshop: for Windows: Camera Raw 5.7 update

  Also, check if you are able to see the thumbnails for Nef files in the Finder

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Videos work in Chrome, but not Firefox or IE

  Hello

  I created a site of Muse, where I joined mp4 videos that work very well in Chrome (Mac), but do not work when tested on Firefox or IE (PC). My goal is that these videos are accessible by a variety of different users of a versatility of good browser. It is currently integrated in an iframe. Is there a better way to integrate video to ensure he plays on all browsers?

  Thank you!

  Rachel

  You can also try the following: -.

  1 import the video to the current tab

  Go to file > add files to download and select the file you want to import. This will copy the file into the active tab by muse.

  2. Insert the HTML code:

  
    
  

• Crashing if I open a document, but not if I use the menu 'file '?

  I've got InDesign CS5 on Windows 7. If I open InDesign and use File > Open, I can start my projects without problem. If I go to the file in Windows Explorer and double-click it, InDesign launches but hangs without opening the document and I have to force quit the Task Manager. Any suggestions? It is not a major problem, but it's a hassle is not to simply select a recent document and open it from the start menu.

  Associate with the file type InDesign

  Right click > open with > InDesign should be included, but the approach of the belt and Suspenders may actually deserve accessing the InDesign .exe file