NB100 - new user. Unable to connect to the internet via a wireless connection

* What can someone help please.*

I bought a NB100 (Ubuntu) yesterday.
He walks and he finds our Wi - Fi connection and got to the web. Large.

I then ran "Update Manager" and since then I can not get internet connection.
In 'Network settings' it shows only "Wired" & "Point to point" as the connection types.

Also when I now click on 'Firefox Web Browser', 'Update Manager', 'Pilot' or 'Add Remove Programs' the equivalent circular hourglass appears for a few seconds, then disappears. The application does not start.

Any guidance would be appreciated.
Thank you.

Post edited by: ikelsey

That's exactly what happened here. See my post very recent inquiry about obtaining later to work. Which might be of interest, you can try the latest version to see what you think without having to install.

With personal advice of an expert, we got the original Toshiba up-to-date and very well with the internet installation, but he still had "problems" with the sharing of files on my Windows network.

Tags: Toshiba

Similar Questions

  • Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

    I have a Dell laptop which does not connect to the internet via the wireless connection.   I can connect via a line to broadband, but not the wireless.   My work PC and iPad are connect.  I tried compand repair network and he says that the problem is resolved.    I tried a system restore a week before that the problem started.

    Any other suggestions?   Thank you

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for vista, win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Ezvpn client unable to route to the Internet via UC540

    Hello

    I have a UC540 configured as a server Ezvpn. I can connect to a Cisco VPN client and connect all private addresses, register the IP communicator etc. However when I try to connect to the web using a web browser it does not connect.

    The client receives the server's DNS entries. I also tried to use the IP address instead of the DNS name and still able to connect on the Internet only. It is a complete tunnel split. I tried checking the box in the VPN client to make a tunnel of split and still unable to connect. Guests on the main site (directly connected to the UC540) can connect to the Internet fine, it's just through the Ezvpn, they can't.  The subnet Ezvpn is included in the nat ACL.

    Any advice would be appreciated.

    Andy

    Andy,

    What is the legacy or the deployment DVTI?

    If inherited, you can create a fake loopback (with 'ip nat inside') and punt ezvpn subnet to it with a road map.

    If DVTI can you please make sure you have 'ip nat inside' on the interface?

    Running config would help ;-)

    Marcin

  • connect to the internet via a wireless connection

    I can't locate my internet connection through the network connection in Control Panel on my secondary computer.  I searched for the connection on my computer main & unable to locate?  How do I add my network & reconnect?

    Thxs
    Nicke

    Set up the connection again

  • The main user unable to connect to local devices, work of guest user

    I have problems that I believe are related to my local network communications, but they seem to occur only when you use my main user account.  When I go to my 'guest' account or another account with administrator privileges - the problems do not appear.    Here are the symptoms:

    -My laptop connects successfully to the internet via a gateway generated by my Apple Time Capsule.  This also works if I connect via an Ethernet cable connected via the time Capsule even (Apple 3 to Time Capsule).

    -My main user account will not connect to my printer (error: "printer not responding").

    -My main user account does not connect to my Apple Time Capsule for Time Machine backups, etc. (error: "no available backup drive - try to save again when Time Capsule 3 to is available").

    However my guest account and a newly created user account (Administrator rights) to connect to the printer and Time Capsule without problems.

    This connectivity of the single user account problem seems to persist if I use Wifi or connect to the Capsule of time directly via an Ethernet cable.  I am baffled by this problem.  I recently reset the printer system, restarted my router, checked the driver print and then through the process of restoring my laptop to a month using Time Machine backup copy (interesting that which helps the OSX restore the functionality of the laptop was able to see the Capsule of time...).  After this restoration, everything worked for about a day.  Then the problems of connectivity (only on my main user account) once again failed.

    I'm no one exert by definition, but I've been a Mac user for many years, so I'm not so much a new user.  I wonder if my network card has problems.

    I would like suggestions for measures to take.  Thank you!

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

    Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

    Firefox would use a profile previously used folder if this user would use the same Windows account.
    It is always better to give each user their own Windows user account and protect your own account with a password if you are concerned about privacy issues.

    You can use the Profile Manager to delete all the files and the profile folder.

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Unable to connect to the internet via ethernet.

    Unable to connect to the internet via ethernet.

    You have published a statement... is not an issue. You have a question?

    Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

  • Unable to connect to the Internet via AP WAP54G through a BEFSR41 wired router

    I'm puzzled. This connection was working fine but something changed... I don't know how he did. I connect to the internet via a WAP54G through a BEFSR41 to a cable modem. I checked all the settings and even reset several times but nothing helped. I can connect wireless to the WAP54G but no internet connection. The signal strength is excellent. The Vista wireless interface signals that I am connected but only locally with no internet relay. What's wrong? What I forgot. Any help will be greatly appreciated.

    Solved the problem. Seems a sequence to these pair of power and even if I cycled power, I did not properly. Also, I created a new wireless network to ensure that nothing is associated with the former network that has been tampered contributed to the issue.

  • LAN Internet - unable to connect to the Internet via a LAN cable

    Hello

    I have an ASUS F3S laptop series running on Vista.

    I went on vacation in early June this year and when

    I got home that I could not access my internet broadband via the bootable.

    I have an another old laptop which works fine using the local network.

    I use the ASUS at work and you can get the internet via wireless LAN.

    When I try to go online using the LAN laptop trying to access the internet

    using the mini port WWAN and not the LAN port.

    I have tried to replace the drivers and in desperation, have used the recovery

    drive to get Vista back to its original setting.

    I still do not have access via the LAN port.

    Any ideas?

    Sanquay

    You must re-create the network connection Wireless LAN (remove the current which is probably set to use the mini port WWAN and create a new one) and specify the LAN port during installation.  This should solve the problem. Check out the following articles for some detailes, suggestions, troubleshooting instructions and general information that may be useful.  Pay special attention to how to remove a wireless/network connection as it differs from a regular connection, and if not done correctly can continue to exist when you think he's gone (and the system it shows same gone but is not).

    Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

    Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

    Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

    Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • "The service user profile Service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

    I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help

    I had the same problem.  Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked.  Then I reinforced to the back and looked at the whole picture.  It turns out that it wasn't a computer after all problem but a question of the user.  Under folder C:/users/default in the end I managed to delete all subfolders except appdata.  So when you went to create a new user he could not find the correct files to copy to the new profile to store information in.  To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine.  Of course I could create my comments and new users account once again.  Finally.
  • Tecra A8 - unable to connect to the Internet via a cable

    Hello!

    I can't connect my laptop to the Internet via cable. The laptop does not recognize when I put the cable. Recognize only the wireless connection.

    Can someone tell me, what is the right software that I need to install in order to have cable internet?

    Hello

    Normally you n t need a software to connect to Internet or router. You should only check the TCP/IP settings. This means that if you have a router that supports DHCP default settings should be allowed, otherwise, you will need to set static IP addresses. It s based on your router configuration.

    What OS do you have right now?
    Is the OS installed Toshiba now or another OS?

    You can also try to update the network driver which can be downloaded from the Toshiba page.

  • Unable to connect to the Internet via my iPad "Personal Hotspot"

    Hello

    I am connected to the internet via my Personal Hotspot iPad2 connection and my laptop... works very well, as you can see... BUT when I do a search on my cinema system Sony Home the wifi hotspot does not yet show upward!

    How can I connect to my Personal Hotspot iPad2?

    Thank you

    Phill

    Hi Phill,

    A Hotspot is limited to a certain speed by the operators. Access point might not meet the requirements for streaming the video data on the Internet.

    So, the Home Theater system cannot be connected to the Hotspot.

    The Internet speed should be 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

    If my post answered your question, please mark it as an "accepted Solution".

  • Unable to connect to the internet via a cable brodband or dsl computer laptop HP pavilion g6

    good day to you all...

    Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...

    Thanks in advance

    Hello

    Please download the driver from the internet of the HP website steps below.

    1. Go to the web page software downloads & HP driver for your model.
  • I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

    Original title: deleted Ethernet adapter

    Hello

    All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
    I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
    First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
    I tried to insert Dell drivers and utilities disk, but that does not change.
    I tried to download on an other computer files from dell that look like they are pilots.
    I tried to set up a new connection
    None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
    Thank you
    Kevin

    Hello

    1. what you're trying to fix by running registry cleaners?
    2. How did you remove Ethernet card?
    3. How are you online using other devices?
    4. What are the devices are?

    Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
    How to troubleshoot possible causes of Internet connection problems in Windows XP
    http://support.Microsoft.com/kb/314095
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

Maybe you are looking for