Video point-to-point call - SX20

Similar Questions

• is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  Dear all,

  Need help :)

  1.

  is it possible, end point of video recorded in CUCM call standalon SX10 via SIP Trunk?

  my customers will not buy TP - lic :)

  Topology:

  8900 (jabber) - CUCM-(SIP) - SX10

  2.

  Customer, have MCU machine.

  If not possible. is it possible, meeting point of MCU use?

  Topology:

  8900 (jabber) - CUCM - MCU - SX10

  1. Yes, but it is not that simple and straightforward that the SX10 can be reached by calling is the public IP address and CUCM does not support the IP address numbering is not a SIP address format...

  2. Yes, using the MCU would be much simpler, easier and, in my opinion, a better solution to be implemented. Here is an example of how a stand-alone SX10 could dial the IP address of the MCU standard automatic.

  You can also assign a SIP URI address to the meeting point which the SX10 can connect to.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Display/video pointer rub the white screen

  Im having problems with the display of things like video clips on BBC Web page or other graphics 'on the move '.  Fragments of the photo and I can not see and the mouse pointer appears to "scrub" the white area of the ideas of what I can do to fix it please?  See you soon

  Hello MZ_52,

  Most likely, you are referring to a Google Chrome installation option that comes in their installation of Adobe Flash Player. This will have no impact on the performance of Flash Player.
  If it was working fine before the update, I would advise you make a restore system before this happened:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• CTI Route Point Call Forwarding

  Hi all

  I'm running 10.5 CM and wanted to know if it was possible before/road called of a Point of ITC road to another CTI Route Point AND at the same time fighter pilot.

  We have just received a new switchboard console and it does not support the Points of CTI road instead, use groups of hunting/line to ring the DNs directly. We wanted to keep our old switchboard console along side again until we're done installation/check the other.

  One of my colleagues mentioned put the driver of hunting and the CTI Route Point in a hunt group and then reference the CTI route Point to that. Would this work?

  Please do not hesitate to provide alternatives that you think will work.

  Thank you

  Matt

  Hmm - you can't have a fighter pilot in the Group of the line.

  There are two options I can think.

  (1) first of all is to have your old extension of CTI - RP and new extensions of the monitoring console in a group of curves. You can then select the algorithm broadcast under fighter pilot group, if you want to send the call for both consoles.

  So you will have a new CTI - RP with call your everything to a fighter pilot. This fighter pilot will be a group of line containing all the extensions for the old and the new console monitoring

  But the downside will be to ring all extensions in the line fighter pilot group at the same time - which means both the old SIC - RP and all extensions for the new console at the same time.

  (2) the second option is to use number SNU. You can add the driver of hunting like the remote destination for the main extension. This will send the call to the old switchboard console and the fighter pilot at the same time - fighter pilot will then hunt for extensions according to the configuration (it will not be broadcast, can be circular, top-down etc. According to your needs). Drawback here is THAT SNR also feeds a license essential or fundamental.

  Others will also be consistent with more options I hope.

  -Terry

  Please note all useful posts

• Tandberg Multi Point called endpoints

  Hello Experts from Cisco TP,

  We have Tandberg Profile and Ex 90 end points, I understand the EX series and profile series integrated MCU resource, how do I configure Multipoint calls without using a separate MCU.

  We have ver.6 VCS and MCU 4505. Can make Conference calls using MCU 4505.

  Thank you

  Bobby

  Hi Bobby,.

  You can foind installed on endpoints, it is visible on a GUI on the system information page, section Installed options

  According to the description of the product of C90, it contatin multisite functionality, if it isn't on EX90, then perhaps he is not bought for it.

  You can check the license using the serial number of the device and licensing tool

  Link to the tool: https://tools.cisco.com/SWIFT/LicensingUI/Home#tabbeditem

  Reach:

  • Tandberg Software Upgrade & search

  then click on search and return and step

  Kind regards

  Vivek

• Nuisance H323 call SX20

  Hello

  I'm having a problem with a SX20 device that keeps the subject of unwelcome h323 calls, no IP address appears and it just says: "cisco".  We received more than 100 of these calls.  As a work around, I blocked all the h323 on the firewall and permitted in a few IP of known addresses we use.

  I tried to look in the logs of the SX20 to see if I could find the address called IP that was spam so I could block but I couldn't find something useful in there.  Is there a better way all about that now I need to manually add an IP address on the firewall, whenever they want to compose a new person?

  Thank you

  Hello!

  Yes, I noticed that in the newspapers of VCS as well.

  Before the common analyses were on sip/5060/udp.

  The same question that you might have in SIP is expoded to the public, in particular the udp port, but there are also scanning on tcp and at some point there will be TLS as well.

  Its like spam, spammers adopt.

  For now, I would say that, as you did to put behind a firewall and not allow that you really want to have disclosure of sources with (which might not be ideal or even possible) or use a call control as vcs or cucm + highway from the outset.

  If you have your firewall from the outset, you can log the ip addresses trying to do h323 and sip connections, you can try to block. But its also while playing hide and seek, there is no common ips used for scanning, and anyway, you don't know where they scan from, often compromised systems are used for these scans.

  Some firewalls have features of geo - ip, which you could block the continents / countries / regions that you do not contact.

  In any case, consider using a call control and admission control there.

  Please rate this announcement using the stars below.

• Video Communications Server "off call an impact."

  Hello

  I work with video Communications Server 8.1 and Lync 2013 trying to get them to work well together in a lab environment. In demo mode, the number of calls of course in demo mode is defined for a single call of course, a non-traversal call and three inscriptions. When I make a call between the two environments, in the system logs, I can see my Tandberg user successfully finding my user Lync in a test call. I see so two followed indicating error messages that the "resource unavailable - call resources" and "temporarily unavailable".

  It seems that I have at least a part of this correct installation (according to Cisco Tandberg and LYnc for VCS 8.1 configuration guide), but the demo license can prevent a successful of the set up call. Anyone can check it please what I see and my assumption is correct but also suggest where I can get a 30 day trial or something similar license that will allow me to use this environment?

  I thank all for the display and help, you may be able to provide!

  You did not mention how you have your registered your VCS - end point is H.323 or SIP or double registered?

  A VCS-> Lync appeal would use a traversal license.  This call is a SIP call, if your endpoint is H.323 endpoint, you need another license of crossing to the H.323-> SIP Interoperability - so it would be two crossed licenses (and the demo has only one).

  If you save your end point with SIP rather than H.323 for VCS, this should remove the interoperability (and reduce the permits required by one) so you should then be able to make a call (although without the authorization of "Microsoft Interoperability", you can still not get things 100% working).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Owner/outbound video disappears after that call will start

  At the bottom right of my screen, I can see the output of my webcam but when my call connect, this preview disappears. Although it may not be absolutely necessary, it is useful when the display to another part something... so I know if the other part is to see what I need them to see...

  Using Skype, the image below shows your outgoing video down to the right while you are in a call. My Skype cache application this preview out the video of the other party is received.

  See my blocking of the positions below:

  

  Wow great forums. Awesome supports everyone.

  Solution: Install Skype Office. Yet another reason Metro UI sucks. Good job, Microsoft.

• CME 9971 active with video can not make calls

  Hello world

  I am currently working on a Cisco 2911 running 15.2 (4) M5, which is the version 9.1 of the CME.  I'm having a problem calls out from the 9971 phone that I registered.  When I dial, the phone is just sitting there and finally times out with a quick availability after a few minutes.  I currently have the 'video' and 'camera' commands configured under "global register of the voice" and "voice register pool" to enable video on the phone.

  I found that when these two orders are deleted, I am able to make outgoing calls from your phone.  I wonder if it is a bug in the version of MAN I'm running or whether it is simply an error of configuration on my part from somewhere.

  For your reference, here is a sample configuration:

  Global voice registry
  FMC of fashion
  source-address 10.8.88.253 port 5060
  Max - dn 20
  Max-pool 10
  authenticate the registry
  Zone 8
  URL authentication http://10.8.88.253/CCMCIP/authenticate.asp  
  Flash TFTP-path:
  create the profile synchronization 0014032233425515
  Server NTP - 67.217.112.181 mode directedbroadcast
  camera
  video

  Register of voice dn 5
  number 7005
  name Office_5
  the line label 1-7005

  Register of voice pool 5
  Mac ID 1C1D.86C5.42E3
  type 9971
  Number 1 dn 5
  SIP DTMF-relay-notify
  username cisco password cisco
  Codec g711ulaw
  camera
  video

  It really looks like a bug to me.  I have no access to internal tools, but did an external search for you.

  Looks like you hit CSCty61190

  Video/camera is activated on 9971 phones, outgoing calls do not work
  Symptom: When the camera/video is used on the 9971 phones, digits are not recognized and calls do not work.

• List of remote calls SX20 and green call button implemented recent

  Hello

  I'm currently looking for a show where I'm trying to simplify as much as possible for the users and with a distance Sx20 workflow when you press the green call button it immediately brings to mind a recent calls list. Is there anyway to not immediately set up this list?

  I was talking to users who are certain that there was a time when the SX20 has not brought to the top of the list by hitting the green button on the remote control. I was wondering if anyone here could remember?

  Thank you

  I remember he was always like that, I did a quick search of bug and even through the release notes and see no mention of a change in this behavior.  The SX20 appeared with TC5 software, looking at the User Guide of at the time, they talk the Green Telephone button is "place a call", so it makes sense that it would be a shortcut to open the list of recent calls.

• A video of B2B inbound call does not not with VCS - C & E

  Dear Experts!

  I have a situation where, for a B2B Media video call is not connected, only alert on video device works.

  I see a video call in my video client E20 ([email protected] / * /), when answered, the e20 continues in answering machine mode since and hang up after 10/20 sec, but the video part remotely ( [email protected] / * / ) see that the call is connected.

  We use the URI numbering, but where as the outgoing video call to any uri or ip address does not work well.

  We use firewalls fortinet, VCS C - E version 7.1, CUCM 9.1.2, E-20 - 4.1.6.

  How to solve it!  is there someone actually facing this kind of problem...

  Happy that you guessed it work.  Don't forget to mark your question as answered by selecting relevant responses which helped.

  For reference, the VCS-E dual network interface and static routes are described in the Deployment Guide Basic Configuration of VCS (control with Expressway) (X8.7) starting on pg 50.

• iPhone 6 is muting phone and video and incoming phone call can be heard only with speaker

  iPhone 6 version 9.3.1 storage capacity 55.7 8.7 available

  Initial problem, maybe not relevant, has card error Sim, which was repaired with a paperclip.  Shortly after, I noticed no noise on videos and no noise entering the phone.  Apparently the phone guess I'm on mode headphones, so listening is possible with headphones or on the speaker phone.

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

• Satellite L650-12 q keeps freezing whenever I have start the video or the phone call

  Hello

  I recently bought a portable Satellite L650-12 q who played perfectly until I tried a video MSN Chat (MSN messenger and Skype). Within seconds of starting the conversation, the computer crashes completely. I get a static screen and nothing works just so than ever and all I can do is press the button works / stop.

  I'd appreciate it really any advice on why this is happening and how can I fix this please?

  Camera assistance software running in the background all the time (starting with Windows)?
  Try disabling it in the start menu > run > msconfig > startup and check again.

  To be honest I have never heard of this issue and especially there is no problem with Skype.

  By the way: have you checked the Skype video settings? There is everything OK?

• How to start a .flv continuous at one point other than the beginning of the video file?

  I have a 1.5 hour flv video that is streaming from a box of Microsoft 2003 with Wowza Media Server installed. In the using Actionscript 3 and the FLVplayback component, I would first of all video on one point about 10 seconds from the beginning.
  
  This code snippet does not work:
  
  myVideoFile.seek (10);
  myVideoFile.play ();
  
  If the video is designed to the appropriate location in the video file, the play() call it returns to the beginning. Thanks for your help!

  It should work, but reverse the declarations

  myVideoFile.play ();
  myVideoFile.seek (10);

• Allowing endpoints make multi-point on Cisco 4505 MCU calls

  Hello

  I have a Cisco 4505 MCU and several endpoints.  Is there a way to allow that my end point called multipoint adhoc using MCU 4505?  For example, I would say that dial site1 using mcu, then dial site2 help mcu or call a group (site 1 and site1...) using mcu and it would know that it is supposed to use the 4505.

  Thank you

  Ravi

  Of course, you can configure (a few 100) static, meeting rooms, auto create conferences on the fly, based on a model or have the means put in place and there is even an on screen menu allows users to create or join conferences.

  Check out the example (page 37ff) Administrator's guide

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/MCU/admin_guide/Cisco_TelePresence_MCU_4-4_Product_administration_guide.PDF