Video problem, first pro cs5.5

Similar Questions

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• Best way to import iPhone 4 video in first Pro CS5 - settings for the import of new "preset sequence?

  Shooting video with my iPhone 4 (ATT version) and try to import the file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.

  The problem is that I am just guessing on how to import sequences, and the result is I'm getting artifacts of movement and generally lower quality.  I use iMovie 11 my basis for comparison.   Not surprisingly, iMovie 11 imports since iPhone beautifully, but when I looked around, inside the properties, there is not much to see.

  Go using Apple built in quicktime 'Inspector', it is possible to see this video of iPhone4 a result of properties:

  file ".mov".

  Dimensions: 1280 x 720

  codecs: H.264, AAC

  Color profile: HD (1-1-1)

  Audio channels: 1

  Total bit rate: 10 543

  AGENCY - PREDEFINED DESCRIPTION:

  < my comments sharp brackets >

  ????  = Question

  General

  Editing mode: DSLR < Correct?   Best I could do, perhaps it should be "Mobile Device" maybe it's okay >

  Time Base: 29.97 FPS

  Video settings

  Image size: 1280 h 720v (1.0000) < of "Inspector" apple quicktime window >

  Frame rate: 29.97 FPS < of "Inspector" apple quicktime window >

  Format of the pixels:?

  Fields: N?

  Audio settings

  Sampling frequency:?

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Mono tracks: 0

  Stereo tracks: 3

  5.1 titles: 0

  SUBMIX mono tracks: 0

  SUBMIX stereo tracks: 0

  5.1 submix tracks: 0

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.  (I'm not worried about the export for iPhone screen, concerning most of the information that I can find).

  Thanks in advance, Michael

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.

  You import it. that's all. First will (or should) use the file in native mode, so no need to do anything out of the ordinary.

  To create a sequence for it, simply one of the clips slide the button new item at the bottom of the project Panel. a new sequence will be created that matches the sequence. Edit now...

• Problem with the creation of a framework implemented in first Pro CS5 masks

  I'm having a problem with creating masks of an exported framework generated from first Pro CS5. I export the image that is 720 x 480. I open the image in Photoshop and check that there is still 720 x 480, change it to create my mask and important in Premier Pro to find the frame is therefore more 720 x 480. To see if the problem is with Photoshop I tried to export a picture and immediately re - import the back always first.  Of course, he has apparently changed aspect because it shows with vertical black bars on either side in the source viewer and actually overlaps the clip original/image as an image horizontally narrowed as part of the program sequence. No idea what I'm doing wrong?

  I am assuming that you are working with a DV footage in a DV sequence; This video format uses non-square pixels, but the images have square pixels. Probably, the pixel aspect ratio (PAR) of the imported image is not be interpreted correctly.

  Right-click on your any graph, and then select Edit > interpret footage. Check that the format of the pixels in the image is set; If this isn't D1/DV NTSC (. 9091), click on the option button "Conform" and choose that BY the menu drop down.

• How can I go to first Pro CS5 After Effects CS6? (Problem)

  Hello

  I try to send my first Pro CS5 video in After Effects CS6, but when I right click on the clip, I can't even option allows you to send to After Effects. I can see the option send to After Effects, but I just can't select it. Any ideas?

  Thank you

  -Billy

  Versions must be the same to make it work.  You will have to perhaps put the original clip in AE and when you're done, export off AE file for use in PP.

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• First Pro CS5.5 installation problems

  I am a newbie to Apple systems and therefore has no chance first Pro CS5.5 installation to my new iMac desktop PC.

  I have correctly installed and used this program on my system Win7 very familiar, but move to OX10 and Apple has proved more

  that my non-technical brain can handle.  I can't find anything specifically labelled Install.app by clicking on some files with

  'Install' on the label, a box pops up saying "there is no set application to open the document.  So I would be able to work on my images,

  and I'd appreciate any help you amazing, knowledgeable, people can provide!  Thank you!

  Have you tried some documents for OSX beginners on the web?

  http://www.YouTube.com/watch?v=8gkvAt1FYps

  http://guides.MacRumors.com/Installing_Applications_in_Mac_OS_X

• First Pro CS5.5 crashes during video playback

  IT's REALL Y F * KING BORING. First Pro CS5.5 crashes when I press space (or by clicking on the Play button), it is impossible to change. Here are my PC specs.

  OS: Windows 7 Professional x 64

  CPU: AMD FX 6300

  RAM: 8 GB

  GPU: AMD Radeon 6570 2 GB

  QuickTime version 7.7.3

  All of my graphics drivers are up to date.

  Please help. I can't change it now.

  Oh and by the way, this is not happened with Premiere Pro CS6.

  What about the rest of the information requested in the Information http://forums.adobe.com/message/4200840 FAQ

• Adobe first Pro CS5 for Mac-installation problem

  I recently bought Adobe first Pro CS5 one upgrade (for Mac) and after I entered the serial number during installation it asks me a serial number of an eligible product, three announcements: first items 4, 7 or 8. I only have first Elements 9. I'd be happy to buy the above products except several sources suggest that PE8 was never produced for Mac. Any ideas of what I can do?

  Contact support and they'll guide you through the process and provide the necessary codes.

  Mylenium

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• First Pro CS5 pixelation with T2i .mov files

  Thanks for the great information!

  Here's my scenario...

  • Windows 7 64 bit family

  • Intel quad core processor

  • Nvidia Geforce Gt240 graphics card

  • 8 GB of ram

  • G - tech g-raid0 drive 2 TB (for image storage)

  • WD Caviar Green 500 GB (OS Win764bit & amp; applications)

  • WD 250 GB usb 2.0 external drive (for backup)

  • First Pro CS5 (prod prem) modded to enable nvidia gt240 graphics card be used with the Mercury playback engine

  Backstory:

  I shot a short film of 2 weeks using a Canon Rebel T2i at 1080 p 24 with shutter speed 1/50.

  At the end of the first day of shooting, I had to transfer the .mov footage off the coast of the Trandcend 16 gb class 10 memory cards with card reader Kingston for the Raid. I used a legacy firewire card connected to the aforementioned PC (it's all I got for the firewire connection at the time), and I noticed that the file transfer has been extremely slow. So for the next two days after I transferred the rest of the video on the Raid via USB 2.0 and the other files transferred much faster.

  Play the images using VLC Media Player is well most of the time, but sometimes I see for about 5 frames pixel information is lost. It is not rolling shutter or jello. Part of the pixelated frame strongly for all 5 to 10 frames. I don't know if it's the loss of data on these images? I agree with a few images here or there, I can work around it if I have to...

  The problem:

  I used the DSLR 1080 p 24 preset to set up sequences of the first Pro CS5 project. After you import the images above, reading in two preview windows randomly is pixelated, similar to the effect of VLC, but random parts. For the most part, VLC is compatible with the management of the problem. Whenever I start the first it will be Pixelize frames in different places than before. Sometimes when I run first first is good, then after a few readings, it starts to distort. After management problem for the current session, the pixelation appears in the clips that have the green status bar. Also, sometimes (randomly) some of the clips in the timeline panel have green waves at the bottom of them, or are completely green.

  I tested the raw images in VLC, WMP, Media Player Classic (after you temporarily install KLite hoping to solve the problem). The problem that all .mov files seem to Pixelize the same framework of each player. First, but pixilated times randomly.

  Tried with two mpeg streamclip and even with cineform neoscene U transcoding. Same results.

  I have not been able to narrow down what is the problem. Any ideas?

  Thank you very much.

  The problem is resolved. My cache of media was written to my local hard drive (c :)), a WD Caviar Green 500 GB. It turns less 7200 RPM, as it is friendly green. After clearing the cache and redirect the path to the raid 0 drive 7200 RPM, the media reads in the timeline smoothly without pixelation. A high technology, Adobe has helped me solve this problem after a lot of troubleshooting. Thank you!

• First Pro CS5.5 using 50% of the processor to Render?

  I just downloaded and installed Adobe first Pro CS5.5 and when I go to make the video it uses only 50% of the CPU power. I did not have this problem in CS5. Is there some sort of setting I need to change? Any help will be great, thanks!

  Your probably having to define the pp optimized for Proccesor not for ram.

• Desktop (first Pro CS5) mode

  I recently had a project who did close and the first time I installed Adobe first Pro CS5, everything worked perfectly. Until recently, I had to reinstall the software, and all of a sudden, there are available in "Desktop Mode". All video files I used now, say "Media disconnected." I hope there is a solution and I don't have to repeat the entire sequence. How can I get back the original with all the video files sequence work properly?

  It seems that the MPEG CODEC (I believe all are MainConcept) don't have reinstall correctly.

  You can try a repair installation? If there is a problem with of the COCEC MPEG, then that should "fix" things.

  Who could take the only Desktop Mode issue too. Something was not installing correctly.

  Good luck

  Hunt

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM