Video will not start RAM, Audio-only preview play

Similar Questions

• Satellite Pro L500 will not start on battery only

  Hello!

  I recently bought a Satellite Pro L500 and have the following problems.
  My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
  The only way to get this light off is to remove the battery.

  Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
  Works quite normal, once started - with or without power connected

  SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
  I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

  After having this problem, I've updated to the latest version of the BIOS but nothing helped
  Tried a different battery and did not help
  Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

  Very annoying!
  Please anyone with a solution?

  Hello

  Try this.
  Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
  Together the two parties again, charge the battery and then remove the power adapter.
  Then try to turn on the unit using only the battery.

  If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

• Video will not start click on the button :(

  Hello

  I hope you can help me. I spent many hours trying to solve this problem.

  I want a button to launch a video in an external window when you click on it.

  I changed the button Action to "open a URL or filename" and viewed at the location (I put the video in the published folder). In the drop-down list, choose "New" to open a new browser window.

  I then publish and open the Captivate SWF.

  When I click the button, it does not start the video. Instead, I get the error:

  "Windows Internet Explorer".

  Impossible to find

  .../Users/Desktop/Desktop/Published /...

  Make sure the path or Internet address is correct. »

  A button cannot start a video, only for example pdf? Or is it because it isn't a flv Mp4?

  Thank you!

  What Captivate version do you use? If it is version 7, make sure you have the 7.0.1.237 version. Earlier version had problems with the relative path.

  Anthony

• After the first Placement on the Timeline, video video will not be placed on the Timeline

  Recently, I have this problem: if I drag and drop a clip on the timeline of sequence for the first time, the sequence automatically creates all the parameters and the video plays very well. However, when I do a second clip on the timeline (exact same type of images, different plug), the video will not, place the audio will be. Is no question of I open the item in the preview monitor and then try to insert images on the monitor of the sequence, or if I'm simply trying to drag images right on the timeline, the video will not be placed and there is some X out on video, when I try. I had this problem with a few sequences of H264 and I thought it was just the codec - but now I use my DVCPRO HD film and have never had the question before. Any ideas? It's very frustrating!

  Is your Source Routing and targeting of the track set correctly?

  

  MtD

• C satellite will not start - only toshiba logo appears

  My laptop is only 1 week and will not start.
  All I get is the toshiba logo and the screen becomes a pale bluish color.

  Any ideas?

  What is your laptop model?

  You are able to access the BIOS?
  Turn on the unit button and press F2 to enter the BIOS.
  The BIOS screen is visible?

  Another idea: the laptop turns on, press the F12 key.
  Usually, you should see a start menu. Here choose the last option called HARD drive recovery.
  This option allows you to recover the computer laptop back to factory settings.

• Acer asl3600 will not start only get option is F12 and no data on the recovery drive.

  Hi guys have Acer asl3600 will not start only option get is F12 and no data on the recovery as disc was in vista family 32-bit premium version devastated as being disabled and need for my community work & charity, thought best option would be a recovery disk.

  Concerning

  Dennis

  Hello

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Acer definiterly only reinstall to factory settings, new condition.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• Satellite A105-S4164 - will not start only white screen

  Hi all
  I have a laptop Toshiba Satellite A105-S4164 that will not start.

  I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
  All I see is a white screen.

  My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.

  Thank you for your comments.

  Seyed

  You can see an image on an external monitor?

  Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Windows 10 videos will not play

  Just updated to HP Pavilion dv6 to graphics AMD Radeon HD 6620 G 10 Windows. Display driver first problem 15.200.1062.1002 fails to install during display package AMD Catalyst 15.7.1 update for Windows 10. Manage Windows devices show the installed driver is 15.200.1045.1. When I check for updates drivers Windows tells me that le.1045 it's later.  But the big problem is that none of the Windows 10 getting started videos will not work correctly. Some play only audio, some say that the video could not be decoded.  Adobe site tell me that I have the latest version of flash.  I even started Internet Explorer went to advanced options and tick the option to not use the GPU.

  Help!

  By installing driver AMD Catalyst 15.6 Beta to win 8.1 has solved all the problems of video.

  Here is the link for the driver:

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• L775-11N satellite will not start

  Hello

  I bought a L775 almost a year ago, but today it has stopped booting. It freezes at the screen of the BIOS (Toshiba logo).
  No HDD LED activity, but all the others are fine.

  I think that the HARD drive is defective, as I traded with my portable Linux and it works.

  However, (a Seagate Momentus XT ST95005620AS) HARD drive works on another computer and even on Linux with the Toshiba (on an external HARD drive enclosure). He has some bad sectors (INTELLIGENT default), but it works as it should.

  I tried to clean the CMOS memory, wipe the HARD drive (using GParted), but nothing.

  Any ideas?

  I think it fails because of the CHIP, as the BIOS will not start on this HARD drive because of the errors, but I'm not sure. I tried to update the BIOS (I think that I've upgraded to 1.90 but there is a 2.0 release), but looks like it is a Windows software only.

  Thanks for your replies

  EDIT: I can boot the disk when it is inside a USB enclosure.

  Hello

  I don t think that this question is related to the failure of HARD drive.
  Even if the HARD drive is faulty, the laptop must pass the POST (power self test) properly but it doesn t it freezes to the Toshiba start screen and this means that the POST has not been passed

  I think you should check the RAM. A faulty RAM can cause this kind of problem
  Otherwise, it could be a serious problem with the motherboard.

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck

• Dell XPS 2710 all-in-One will not start, the totally blank screen

  Hello. This is my first post on the forums and I hope someone can help me.

  The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.

  The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.

  I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.

  Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.

  OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.

• Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

  I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

  It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

• Video will not insert into the timeline

  OK, so video and audio will be both be switched on timeline when I create a new sequence by dragging the "new item" icon.

  
  

  BUT

  
  

  When I drag a clip in one existing sequence that has the same parameters as the video I am dragging, inserts audio only in the timeline .

  
  

  Using images directly to the output of the GoPro camera. 1080 p @ 60 fps.

  Checks:

  > I tried dragging directly to the timeline

  > tried clicking on the button "insert."

  > tried to use option only drag "Video".

  > V1, V2 etc are highlighted / activated.

  > no video tracks are silent.

  > I tried all audio tracks to see if it would force to insert video or audio video insert inhibition.

  > if I create a new sequence with the clip of the said and then copy I can paste it into the original sequence clip said wouldn't drag/insert on to.

  > if I select several clips and drag on a new sequence with 'New element', they will insert all with video and audio.

  I found nothing on Google which approached except 2 people who have the opposite problem, which was not inserting audio but not their solution was that they have simply not A1. A2 has highlighted.

  Hi, its probably all in the source patch tracks.

  

• Carillon of boot loop - start 2011 MBP will not start.

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Check Google for this error, it seems to be common.

  Apparently the startup configuration file is corrupted. These 2 articles can be useful:

  http://www.Hackintosh.computer/?p=67

  https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2