View of the horizon 6 - customer zero can't see RDS Deskstop

Similar Questions

• quick mask. When you press q after a quick mask of finishing, I don't see the selection. When I can't see the diagram of the opening levels. How can I solve this?

  quick mask. When you press q after a quick mask of finishing, I don't see the selection. When I can't see the diagram of the opening levels. How can I solve this?

  He has worked previously. I must have pressed some buttons or everything that makes this problem occurs.

• View of the horizon 6.2, 3.5 see Client and Windows 10

  Hi all

  I did an in place upgrade of Horizon view 6.2 over the weekend and have been very satisfied the performance and features.  However, I have a bit of a problem with Windows 10 company.  The VDI desktop resize not balance not as expected.  It seems that whatever the Windows 10 Office is set in vSphere, seems to stay when connecting with the customer to view.

  I had this problem for Horizon 6.1.1 with the 3.4 customer, but not a not sweat until this recent publication.

  I wanted to remove my image of Windows 10 company as being the culprit, so I installed a new version of Windows 10 Enterprise 64-bit with the latest tools from VMware View Agent and the problem persists.

  I'm under 6.0.0.b and ESXi 6 vCenter with the latest patches.  I can validate the scale/resize screen problem occurs on multiple endpoints, so I don't think the problem is with the endpoint device and the client.

  Any ideas?

  It's 3D acceleration.  Turned off, power off/on VM and everything works as expected.  (SVGA/NVIDIA) 3D acceleration is not supported in Windows 10?

• View of the horizon 3.5.0 and ThinApp v4.7 with Cisco ASA Smart Tunnel 9.3.3

  Hello

  The problem:

  Our technology smart tunnel doesn't seem to be forward traffic to our new customer from the view.  I wonder what kind of configuration changes must be considered to enable such a connection.  The error returned when searching for the host name goes in the direction of the hostname not found.  Error finding of intellectual property is related to the time-out.

  Background information and specifications:

  We are in the process of upgrading our servers from 5.2 to 6.2 connection.  As part of the upgrade, we want to improve our customers for the Horizon to use version 3.5.0.  To make it easier on vendors and remote computers we prefer also to our Horizon View Client with ThinApp 4.7.3 ThinApp.  We currently have a Cisco ASA, supporting a SSL VPN portal with "Smart Tunnel" technology.  The ASA is currently on firmware 9.3.3 in production, but we have access to version 9.5 in test.

  Preferred connection scenario:

  User > PC > VMware View Client (ThinApp would be) > Cisco ASA Smart Tunnel > view connection server > Virtual Office

  .exe running on the client to view ThinApp:

  It seems the ThinApp Client version view is only launching VMware - view.exe.

  .exe running from the customer view full/thickness:

  VMware - view.exe

  -ftnlsv.exe

  -vmwsprrdpwks.exe

  -ftscanmgr.exe

  There is something else to consider when the view client configuration ThinApp or thickness to work with Cisco SSL VPN Portal and the Smart Tunnel?  We should have ports configured in the client in connection with the same view Firewall works with SSL VPN Portal port redirector functionality.

  We have not been able to find any documentation on how to properly configure the smart to work with the New Horizon 3.5.2 client Tunnel.  A ticket of troubleshooting with Cisco suggests that the Smart Tunnel feature still perhaps not compatible with this new Horizon (thin or thick) client.  Currently, we are looking at other options because it is not not clear whether Cisco will be able to get us the confirmation or offer a solution without delay of our project to upgrade.  Maybe stick to the previous VMware View Client version 5.4.0 which we know work with Smart Tunnel in some situations and with the redirector port for others.

• View of the horizon 6.0

  Can you upgrade from 5.3 6.0 on the Horizon while users are connected to the Desktops.Thinking I just disabled the commissioning.

  Part of the process restarts the connection broker service.   See the upgrade guide, https://pubs.vmware.com/horizon-view-60/topic/com.vmware.ICbase/PDF/horizon-view-60-upgrades.pdf

• View of the horizon and 'Blast' Protocol

  Hello

  I have recently updated our login servers and security to view Horizon 5.2 and I see the option to enable HTML5 pool access, but it indicates that an office feature pack must be installed.  I was not able to find this "feature pack" anywhere.  I've been through the administrative guide for 5.2 and it really do anything don't speak HTML access.

  Can someone point me in the right direction so I can start to do some tests with HTML5 access to desktop from view?

  Thank you!

  According to the notes of https://www.vmware.com/support/view52/doc/horizon-view-52-release-notes.htmlversion:

  These components will be available shortly after the general availability of VMware View Horizon 5.2 and may subject to availability of the app in various application stores mobile device.

  I feel your pain, I was really looking forward to test access HTML 5.

• View of the horizon - cmd Powershell for Description

  Hello

  Currently using:

  5.2.0 build-987719

  I had success by using the Get-DesktopVM and Get-pool for PowerShell cmdlets.  There is a cmdlet that will reveal the "Description" field that I can enter the pools on VM Admin view?  For example, if you navigate away from the Admin of VM window > inventory > pools > < poolID > is a Description field where we have notes on the pool.  I would like to retrieve this info so I can use it for further processing in additional systems.

  Please let me know if you need more information.  Is attached a screenshot of the computer virtual Admin window and the area I'm worried.

  Too bad

  The description field was actually available under Get-Pool.

• Why do I hear the sound but don't can't see the image on the PC games?

  I BOUGHT A PC DVD-ROM FOR MY DAUGHTER IT WAS WORKING FINE UNTIL I HAD THE INTERNET NOT I CAN'T HEAR HER AND NO IMAGE OF THE GAMES CAN BE SEEN

  Hello AndreaCobos,

  1. What is the format of the video files that you are tying to play from the DVD?

  2. this happens with every DVD or any particular DVD?

  I suggest you to check the format of the files you are trying to play from the DVD. This problem can be caused due to codecs not supported by Media Player.

  Please check the format of the files and let us know the format of the file.

  a. right click on the video file and click Properties.

  b. you will find the format of the files there.

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• whenever I open my email or internet only 3/4 of the screen appears and I can't see / click on the maximize button. I'm on xp. Help, please

  I'm not too good at the technical jargon. Please be gentle with me :)

  Hello

  It seems that your screen resolution is set too low.

  • Close all your programs (if you can't see the close button, right click on the taksbar icon, and then click close)
  • Right-click on an empty part of the desktop and then click Properties
  • Click on the settings tab
  • Move the full screen resolution slider to the right
  • Click OK
  • If you are prompted to confirm the change, click Yes

  Tricky

• I can't see some photos in an e-mail message, there is a picture box and a Red Cross in the left corner? How can I see the pictures?

  When I get an email, there sometimes a picture box and a Red Cross in the left corner and I can't open the photo, how can I open the photo please. ?

  I see that you have published on the Vista Networking Forum and told them that the problem is with Hotmail.

  They correctly you advised to repost in the Hotmail Forums.

  Here is a link to your Vista Networking question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Hotmail-some-emails-do-not-show-the-picture-a/885b912a-ba4a-4124-b3bc-187b6d0840ad

  Good luck.

• I can not get to open Paint. I see the flip option, but it has not been highlighted as the other options. I can only see the shadow of the flip icon

  I can not get to open Paint. I see the flip option, but it has not been highlighted as the other options. I don't see the shadow of the flip icon. When I click on the brush, it does not.

  Hello

  To help you with your problem of paint, we suggest to consult this topic, use the File Checker system to repair missing or corrupted system filesand follow the steps to run the tool (SFC.exe) System File Checker on this article: 929833 KB.

  Thank you

• Want to return to the default color, so I can stop seeing the Green and purple faces borders

  I only had my computer for two months.

  I'm playing with the colors, and now I can't go back to the default colors. I managed to get rid of the purple text, but cannot get rid of the Green faces with everyone, stories in my own personal photos.

  I SEE everywhere is purple and green.

  I took many choices by going to "customization", but all I want is to go back to normal / default. I don't want text and colorful faces!

  I've been in Control Panel > appearance and personalization > personalization.  I don't want this COLOR; I just want what it was when I bought it.

  Thank you, Bill, but the instructions in the link you gave said I must have an administrator account; I don't.

  I called Dell tech support today and this guy couldn't have known what to do after an hour of playing with it remotely. He wanted to send me a label and I could box it upward and send it to them.

  He put me on hold, and I just hung up.

  Then, I took it back where I bought it.  This store asked me to leave it for a week.

  So I went with the computer and sales one of the guys to let me use his computer to get onto a chatroom with their own technical support.  Their tech support guy had me do an uninstall of graphics and then reinstalled.

  It worked. Yay!

• View of the horizon - Tera1 zero clients

  I know Tera1 Zero Clients are not supported with view Horizon 6.1, but I was wondering if someone use them anyway?

  Not happy to learn that they are not supported, that's for sure

  They are not supported, but they are still working with existing features.

  10ZiG offers redemption Tera1 devices from any manufacturer: http://www.pages03.net/10zig/terra1/

• Why show black screen for some of my users with a view to the horizon?

  Hello

  I installed horizon view 6.0. now, I just have a problem sometimes some of my users connect to their desktop with vmware view client horizon just see a black screen and cannot do everything even when I'm this office openconsole in vsphere client no show and a black screen for solve the problem I have to restart this desktop computer and its not ok how can I prevent black screen

  now I see that my status of vmware tools was obsolete is so important?

  What di I do?

  Best regards

  Babak

  As often occurs when the wrong VGA driver is installed.  This occurs when the view Agent is installed on the desktop, and then the VMware Tools is updated after the fact.  The result is the driver included with the Agent to view VGA is replaced with the VGA driver in VMware Tools.  You can see some advantages to the relocation of the Agent of the view, or update the VMware Tools and then install the Agent from the view.

• View of the horizon 6 without Active Directory

  Hello

  I have a Setup with 2 ESXi servers and stand-alone server with Win 2012 and here's installed vCenter.

  I need to install 6 view Horizon for workstation 5 only, and I have not installed the Windows domain and Active Directory.

  How can I install Horizon?

  I read that a prerequisite is AD.

  Can you help me?

  Thank you

  You could install the Direct Connect agent instead, which does not require an announcement but you won't be able to do any brokerage.

  Linjo