View of the Horizon from VMware and Microsoft Lync 2013

Similar Questions

• Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not either of these browsers use

  Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not use either of these browsers. I chatted with Comcast and they are the ones who asked me to try to gain access to other browsers. And, as noted, I managed. Only my opening my email to Comcast.net inhibits the Firefox, the browser that I use on a regular basis because of this problem I can't use Firefox.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• View of the horizon 6 - customer zero can't see RDS Deskstop

  Hello!

  We have been in view for several years.  I just deployed a Desktop of RDS.  If I connect to the server from view with the client software from view of the Horizon, I see the desktop as an option, as well as other items of work to which I have the right.  However, when I connect to the server with a Client light Wyse zero (P20s and P25s), I can see other automated and manual office pools, but the RDS Desktop pool is not listed.

  This configuration is not supported?  Is there a parameter required to allow connects to RDS Desktops?

  Thank you very much!

  Update:

  I found this article:https://techsupport.teradici.com/link/portal/15134/15164/Article/2479/Do-PCoIP-zero-clients-support-Microsoft-Remote-Desktop-Services-15134-2479

  After that I updated one of the clients Tera2 zero to 4.7, I was able to connect to the RDS office pool.

  I'm glad to hear that you figured it out.  Can you mark this issue as resolved?

• I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem

  I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem. What do I do?

  If you are prompted for a serial number in the creative clouds, see this link:

  https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html

  Guinot

• I would like to bring to the text from Word (and the web) which is already a hypertext link in InDesign. How can I do it while keeping the links active?

  I would like to bring to the text from Word (and the web) which is already a hypertext link in InDesign. How can I do it while keeping the links active?

  Whenever I have to copy and paste from the web or Word it removes hyperlinks.  And when I try to do in 'Place' ing a Word document in my InDesign project that it retains formatting with it, the rectangles around the text.

  I have the latest version of InDesign.

  Any help is appreciated.

  Copy-paste might not include the shaped. A regular import using square is the best way.

  The rectangles around the hyperlinks are just to indicate that they are links - they do not print, but they appear in your PDF.

  You can delete them by double clicking on the hyperlink in the hyperlinks Panel and select "Rectangle Invisible" as the type.

  In general, Word formatting of hyperlinks - blue text, underline - with a character Style. If you want to remove or change the formatting, all you have to do is to change the character style. My experience, however, is that you need to check all the hyperlinks because no reason apparent, sometimes they appear in the document without the character style.

• View of the horizon 3.5.0 and ThinApp v4.7 with Cisco ASA Smart Tunnel 9.3.3

  Hello

  The problem:

  Our technology smart tunnel doesn't seem to be forward traffic to our new customer from the view.  I wonder what kind of configuration changes must be considered to enable such a connection.  The error returned when searching for the host name goes in the direction of the hostname not found.  Error finding of intellectual property is related to the time-out.

  Background information and specifications:

  We are in the process of upgrading our servers from 5.2 to 6.2 connection.  As part of the upgrade, we want to improve our customers for the Horizon to use version 3.5.0.  To make it easier on vendors and remote computers we prefer also to our Horizon View Client with ThinApp 4.7.3 ThinApp.  We currently have a Cisco ASA, supporting a SSL VPN portal with "Smart Tunnel" technology.  The ASA is currently on firmware 9.3.3 in production, but we have access to version 9.5 in test.

  Preferred connection scenario:

  User > PC > VMware View Client (ThinApp would be) > Cisco ASA Smart Tunnel > view connection server > Virtual Office

  .exe running on the client to view ThinApp:

  It seems the ThinApp Client version view is only launching VMware - view.exe.

  .exe running from the customer view full/thickness:

  VMware - view.exe

  -ftnlsv.exe

  -vmwsprrdpwks.exe

  -ftscanmgr.exe

  There is something else to consider when the view client configuration ThinApp or thickness to work with Cisco SSL VPN Portal and the Smart Tunnel?  We should have ports configured in the client in connection with the same view Firewall works with SSL VPN Portal port redirector functionality.

  We have not been able to find any documentation on how to properly configure the smart to work with the New Horizon 3.5.2 client Tunnel.  A ticket of troubleshooting with Cisco suggests that the Smart Tunnel feature still perhaps not compatible with this new Horizon (thin or thick) client.  Currently, we are looking at other options because it is not not clear whether Cisco will be able to get us the confirmation or offer a solution without delay of our project to upgrade.  Maybe stick to the previous VMware View Client version 5.4.0 which we know work with Smart Tunnel in some situations and with the redirector port for others.

• View of the horizon 6.2, 3.5 see Client and Windows 10

  Hi all

  I did an in place upgrade of Horizon view 6.2 over the weekend and have been very satisfied the performance and features.  However, I have a bit of a problem with Windows 10 company.  The VDI desktop resize not balance not as expected.  It seems that whatever the Windows 10 Office is set in vSphere, seems to stay when connecting with the customer to view.

  I had this problem for Horizon 6.1.1 with the 3.4 customer, but not a not sweat until this recent publication.

  I wanted to remove my image of Windows 10 company as being the culprit, so I installed a new version of Windows 10 Enterprise 64-bit with the latest tools from VMware View Agent and the problem persists.

  I'm under 6.0.0.b and ESXi 6 vCenter with the latest patches.  I can validate the scale/resize screen problem occurs on multiple endpoints, so I don't think the problem is with the endpoint device and the client.

  Any ideas?

  It's 3D acceleration.  Turned off, power off/on VM and everything works as expected.  (SVGA/NVIDIA) 3D acceleration is not supported in Windows 10?

• View of the horizon and 'Blast' Protocol

  Hello

  I have recently updated our login servers and security to view Horizon 5.2 and I see the option to enable HTML5 pool access, but it indicates that an office feature pack must be installed.  I was not able to find this "feature pack" anywhere.  I've been through the administrative guide for 5.2 and it really do anything don't speak HTML access.

  Can someone point me in the right direction so I can start to do some tests with HTML5 access to desktop from view?

  Thank you!

  According to the notes of https://www.vmware.com/support/view52/doc/horizon-view-52-release-notes.htmlversion:

  These components will be available shortly after the general availability of VMware View Horizon 5.2 and may subject to availability of the app in various application stores mobile device.

  I feel your pain, I was really looking forward to test access HTML 5.

• Why show black screen for some of my users with a view to the horizon?

  Hello

  I installed horizon view 6.0. now, I just have a problem sometimes some of my users connect to their desktop with vmware view client horizon just see a black screen and cannot do everything even when I'm this office openconsole in vsphere client no show and a black screen for solve the problem I have to restart this desktop computer and its not ok how can I prevent black screen

  now I see that my status of vmware tools was obsolete is so important?

  What di I do?

  Best regards

  Babak

  As often occurs when the wrong VGA driver is installed.  This occurs when the view Agent is installed on the desktop, and then the VMware Tools is updated after the fact.  The result is the driver included with the Agent to view VGA is replaced with the VGA driver in VMware Tools.  You can see some advantages to the relocation of the Agent of the view, or update the VMware Tools and then install the Agent from the view.

• View of the horizon 6.0

  Can you upgrade from 5.3 6.0 on the Horizon while users are connected to the Desktops.Thinking I just disabled the commissioning.

  Part of the process restarts the connection broker service.   See the upgrade guide, https://pubs.vmware.com/horizon-view-60/topic/com.vmware.ICbase/PDF/horizon-view-60-upgrades.pdf

• View of the horizon 5.3 Exchange at the level of the Office/Lync bits

  Hello

  I know there are a lot of discussions on the mismatch between levels bits for deployments of VMware View Horizon in combination with Lync 2013

  AFAIK the bits of the customer level Lync must match the number of bits OS.

  Thus, for example:

  On the virtual machine: needs of Windows 7 SP1 64 bit 64 bit (including the lync client) Office 2013

  but for my situation, I want to use the 2013 32-bit office.

  The research on the internet and I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2064266

  If I understand correctly, it seems that you most use the 64-bit office (lync client) when you are VM OS is 64-bit.

  I don't understand?

  I love working at this situation "supported":

  VM:

  Windows 7 SP1 64 bit

  2013 office (including the lync client) 32-bit

  Bit of agent 5.3 64 view horizon

  Client:

  10ZiG computer Thinclient Windows 8 embedded 32-bit

  32 bits of Lync VDI plugin

  Customer view horizon (later, 32-bit)

  Looks like it is supported to 5.3 on?

  You are right.  With view 5.3, the bits client Lync 2013 level didn't match the level of the bits of the VM operating system.

• Ability to store data about the free space is not the same in VMware and 3PAR

  Hello

  I'm running vSphere version 5.1.0 Server build 799731 and all my ESXi hosts running the same version: 5.1.0 799733.

  I use 3PAR as a storage system for my VMware environment, but on some of my LUN created, I get a different number on what is currently available as a free space on the LUN.

  On a LUN (LUN2_R5), vmware says that is has a capacity of 3 to and free pace on TB 2.08 (and it has been updated this morning).

  But if I look in my view of 3PAR system, the same number of unit logic (LUN2_R5) has a size of 3 TB, but the size of the user used in 85% (2.6 TB of data).

  If I do a look of VMware in the LUN, corresponds to the size on the LUN with the VMware view server, but I do not understand why 3PAR has another number.

  Can you help me?

  Kind regards

  Carl-Marius

  Your storage system only "knows" what's on the VMFS file system. As soon as the space is allocated, it is marked as used from the point of view to the storage.

  André

• The upgrade from VMware Workstation 12: can I install above?

  So I just bought a license to upgrade to workstation 12. Now, I noticed that it is (finally) 64-bit native. However, 11 Workstation is native 32-bit. Can I just install VMware Workstation 12 top like I did the upgrade from 10 to 11? Because the 10 and 11 were native 32-bit.

  The question is moot.
  Upgrade has always meant uninstall the old version, install the new version.
  If you do it yourself, you have more control, but the results will be the same.

  The safest option is: uninstall manually - reboot - check registry for services that have not been removed - if necessary, repair registry - restarts again and then install the new version right after the restart.

• View towards the front/back/bookmark and all the other great records page disappeared. I tried to start without danger but that brings back me to the same web page without any tool. Everything that I have visible are the carriage of Norton and cards &

  How can I get my tools back on top - no backward/forward, no VIEW, no tools, no bookmarks - nothing. I tried opening in safe mode and start - run by following the instructions but the same high vacuum of the page opens.

  Don't see the menu bar (file, publishing, display, history...) (Help)? Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.
  See the other bars under view > toolbars. Click on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, display, and then click status bar to place a control mark (display) or remove the check mark (not shown).

  • If items are missing then see if you can find them in the view > toolbars > customize window.
  • If you see the item in the window customize then bring her back in the window, customize the Navigation toolbar.
  • If you do not see this item then click Restore default set in the view > toolbars > customize window.

• I can hear the sound from speakers and headphones...

  Hello..

  I use HP Pavilion dv5-1106AX laptop computer (Windows 7 OS). I can hear the sound from the speakers and the headphones when I connect the headphones into the headphone slot. I want to hear the sound from the headset when I connect the in the slit of the helmet.

  Any help on this would be appreciated.

  Thank you!

  My problem is solved. I found the solution here:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/music-playing-through-my-speakers-and-through-my-earphones/TD-p/3890528