view table 1 d in the digital indicator
I would like to display the first item in the digital display and the next show in the second place, the second component of the digital indicator and so on.
How to get around doing tat?
Try this:
Tags: NI Software
Similar Questions
-
How to upgrade the digital indicator with digital input
Hello guys,.
I'm trying to write code to do the following:
The P0.0 USB-6501 connected to a switch which is held at the top via a resistor.
The switch is pressed and I can detect the entry (my LED panel changes color).
I need to update a digital indicator (I think it's the correct vi I use) whenever you press the switch.
Any assistant will be much appreciated.
-
Size of analog input to see the digital indicator cover
I read a channel of analog input with several samples, and I want the magnitude of which is playing to display on a digital indicator which is on my front. I know that it is not possible to wire just the data directly to a digital display of the signal due to the difference in the data type. Does anyone have an ideal on how I can get around that?
Dear Thuillot
You can use 'Extract only your Information' function found in the range of signal processing.
You can find more information on this feature here
Kind regards.
-
How the table is written with the digital I/o card
Hi, sort again at the sight of lab but I'm looking at some old lab view code that has an array of integers 8 bits with 8 values inside that is connected to a DIO VI writing. Is just a few questions, there a way to know if writing DIO VI is a view lab Vi or VI created by a user? Also the DIO is the NI PCI-6533, 32-bit card and there is the array of 8-bit integers has 8 elements inside it would be the the map first write the first 4 elements at the same time (first element of bits 0-7, bits 8 to 15 seconds, ect) and then the last 4 items in the table or would be writing DIO VI will have to run twice once for the first 4 values and, once again, for the last 4?
Thank you
Hello
use a non sequential ring with values...
Display photos or even better the actual code would help greatly to give good advice! At the moment we can only guess, what you're talking about...
-
Once I receive an SMS, it should be a digital display on the icon of the SMS application that displays the number of messages unread I received. This is not the case. So I am unable to see that I have received a message, I don't have the text application open. No idea why this is?
Check the settings-> Notifications and see if the badge icon is enabled for this app.
-
display the exact value of a slide to the digital indicator whenever it is changed
the subject says it all
Right-click to digital exhibition
Ben
-
Decoration of the digital indicator?
Hello
Is it possible to delete this workers effect you get with digital boxes? Please refer to my image as an attachment.
Thank you very much
Go with the classic digital Simple command instead.
-
No news; projects merged with table of contents and the separate indices
It turns out that I have three projects that will have to be created:
(1) file for Admin users:
Administration
Users management
Users (general summary)
Folder (2) for the users of the approver/PM:
Users management
Users (general summary)
Record (3) for regular users:
Users (general summary)
I'm not sure if in RH6, I'll be able to generate separate TOC and indexes. Can someone tell me if there is a better approach to enable this functionality?
Kind regards
Sharon
So please mark the thread as answered.
-
I use the digital indicator for my Countdown to 0 (zero). The thing is I don't like when the number of numbers to 0, and then view - 0. Someone knows how to set the display to 0 instead of - 0.
Thank you
The only reason is could may show zero is if it's displaying a negative number slightly less than zero and is getting round. What is the representation of your screen? Is this double or is it all over? Maybe if you have validated your VI, we see what is happening and provide better suggestions.
-
Possibility to write a program for a digital indicator labels
I see that there is a property node for the digital indicator that you can manipulate the tag with it. After trying to use this feature, I get an error saying that you can change this functionality during edit mode. My question is if there is property node to change the text why you can't it programmatically change?
You must show the legend for the control and hide the label. You can change the captions at run time.
-
in the cell indicator digital table according to the color value
Is it possible to change the color of text in individual cells of a digital display indicator depends on the value of the digital displayed in this cell.
You can use the ListBox instead of indicators in table. You can change the ownership of each cell individually.
-
Digital indicator rounded to the nearest whole number
I have a digital indicator for a 2D double table, and when I play with the display Format in the properties of the indicator, I can adjust to show the 3 digits of precision. However on the indicator, I find myself just get something like 1548.000. However, it did not make sense to me that this number would not have some amount of non zero decimal places, and when I probe the wire table 2d, enter the flag during the race, I can see that the number should actually be something like 1548.315... Is there a rounding adjustment when I checked that I can't find? (The indicator is set to U16) Any help would be greatly appreciated.
Colin
Of course I answered my own question as soon as I post. I realized that I wrote that the indicator is U16 that that was my problem, change to the dual representation to be fixed. Sorry for this pointless topic.
-
You can use the value of a digital indicator in a digital control?
Hello!
I have to develop a code where I need to find the maximum value of a waveform and draw a line at 50% of the value. So I chose find the amplitude of say 10 cycles of waveforms and found the maximum value of the amplitude.
But my real problem is, I have to use the maximum amplitude value I get from the table VI maximum and back into a program to calculate the value of 50%.
So it is possible to use the value of a digital indicator and put it in a digital control? As in MATLAB or C, you give a name to the variable and use it later to do all the calculations. Is it possible to do something similar in LabVIEW?
-
I read another post on this forum, but I can't seem to make it work as I'd like. I have a constant matrix 1 d in the block diagram, which I want to output to a digital indicator on the front panel. The thing is that I wanted, it displays the first item in the table for a while, and then automatically update the second element and so on. I guess that this will involve loops and others as I have tried, but above all it has yet to work properly.
See you soon
Craig McMillan
Just change everything in a loop to a for a loop and pass berries outside.
-
Hi all
I can't display the values that I want. I have a value double say 320 sent to a digital indicator where I edited the properties of it to display in a time format that contains only minutes and seconds as Yes, 3:20 '. Unfortunately, it takes the value and change it to another value and display that. I don't know what is the issue. If anyone knows the solution... Please post!
There is an image attatched!
Thank you.
I believe only then due to the fact that when I convert a timestamp value to double as 03:20, he gave me 320. So I thought that the reverse can be trying. Should I just enter the total amount of seconds and that will show the Minuteseconds I want?
Thanks for the quick response.
Maybe you are looking for
-
Firewall message: % company_name_neutral % personalfirewall
message title in the control of sales of my firewall. I am unable to make any changes to firewall and worry that my firewall has been hacked. This came after the most recent update of security for 64-bit, including the update for IE9. I'm running
-
Cannot turn off the prompt of password to wake up sleep monitor
So whenever my screensaver lights up and I'll be back to wake up the monitor I get the password of the user account guest. I am running Windows XP home on a dual boot Macbook Pro. I have the owner administrator account and staff use account for the
-
I was on the computer looking for yahoo, and they me shot because they were told I had already signed on somewhere else. My password no longer works. I had norton scan earlier and he said that he blocked a person to surrender. Although Apparentley so
-
No network adapter is displayed in the network and sharing Center
My internet connection works very well through a router, but if I go to the network and sharing Center and click on change adapter settings, I get a blank page.The adapter appears in Device Manager and it is used by the computer as disabling it kills
-
Configuration of the simulator of MD5
Hello, am having trouble lately with my simulators (OS7 and more) network access. I have an app I want to test it with the Internet, how to configure MD5 to allow access to the network for my simulators. Thank you.