Virtual Internet computer access

Similar Questions

• Win XP computer access internet life ethernet, but not recognized on LAN

  Desktop computer Win XP is connected to a local network (via ethernet) and recognized.  Shared files can be exchanged on the local network.  The Win XP computer was temporarily moved to a different location and an installed wireless adapter.  Two weeks later the Win XP computer was returned to the original location, removed wireless adapter and related to the uninstalled software.  Now the Win XP computer accesses the internet (via ethernet), but is not visible on the local network.  Win XP sees no other computers and other computers do not see the Win XP.  Trying to troubleshoot the network.  Troubleshooting the "1394 connection" gave a TCP/IP message has not been activated.  Check the 'properties' found that the 'Internet (TCP/IP) Protocol' is checked.  Is there another place where TCP/IP must be enabled?  Maybe a checkbox?

  Thanks for the help.  Unfortunately, I tried two suggestions, all of the above steps, and nothing has fixed my problem.  However, during the process of going through the steps in the "http://support.microsoft.com/kb/308007/en-us", I discovered "Microsoft Fix - it Solution Center".  Treatment of the symptoms of MS Fix - it network provided an instant repair the problem.  I still don't know what exactly was the problem, but now all computers can see each other on the LAN.

• I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need a ins

  I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need an installation file that won't connect to the internet. -help

  Hi colinkerr22,

  Offline installers are displayed at the bottom of the Installation problems | Flash Player | Windows in the section "problems".

  --

  Maria

• WRT54G VG/wusb54g V4 no internet no access

  WRT54G VG/wusb54g V4 no internet no access

  Everything worked fine last night and then collapsed. Reset, Hard Reset, called the cable operator. Can directly get Internet when pulgged in. Can connect to my network but the router now as everything, but I can't get online via the router.

  Manager hardware says that the apadter is very good...

  Any ideas?

  Upgade frimware I guess it's more of a replacement for the fixed... Yes!

• Can not power on virtual machines "cannot access the file because it is locked.

  Virtual machines have been working well - then the storage system is down.  After the storage system returns upwards that I can't turn on a number of virtual machines.  Get this error when I try to turn it on:

  Cannot power on vmname on esxhostname.xxxxx.com. Unable to access file < unspecified file name > because it is locked
  error

  1. To check the locks on the Service Console on non ESXi servers, run the command:

     lsof | grep

     COMMAND PID USER FD TYPE SIZE NŒUD NOM_PERIPHERIQUE
     71fd60b6-3631 root 4r REG 0.9 10737418240 23533

     Note: If there is no Console of Service process the locking file, you should receive no printed output. If you receive results, however, file a support request to identify the process and to determine the causes.  If it is a third-party process, however, contact the appropriate provider to determine the cause before you kill the process ID, because it can happen again in the future.

     Stop the process and the lock ID using the kill command. In the example above, the process ID is 3631:

     kill the 3631

     After the termination of the process, you can try to turn on the virtual machine or access the file resource.

  2. To check if the virtual machine is always a world ID assigned, run these commands on all ESX/ESXi hosts:

     CD/tmp
     VM-support - x

     Available to debug worlds:
     WID =

     On the ESX/ESXi host where the virtual machine still works, kill the VM, which releases the lock on the file. To kill the virtual machine, run the command:

     VM-support - X

     Where the is the ID of the world of the virtual machine with the locked file.

     Note: this command takes 5-10 minutes to complete. Answer No to "can I include a screenshot of the virtual machine", and answer Yes to all subsequent questions.

     After the termination of the process, you can turn on the virtual machine or access the file resource.

  Deleting the file .lck (NFS only)

  The virtual machine files can be locked via NFS storage. You can identify this as reported by .lck files. # (where # is the ID of the world that holds the lock file) at the end of the file name. It is a NFS file lock and appears only when you use the ls command as it is the hidden file.
  Beware: they can be removed safely only if the virtual machine is not running.

  Note: VMFS volumes have no .lck files. The locking mechanism for VMFS volumes is managed within VMFS metadata on the volume.

  You must kill the process that is locked, if it is not the case, you probably need to restart the VMware host.
  I tell you from experience most likely end up rebooting it.

• can no longer old computer access cannot access photoshop first need to re-download

  can no longer old computer access cannot access photoshop first need to re-download

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  http://prodesigntools.com/tag/DDL

• I downloaded the latest Firefox security update and my computer access is no longer the internet anyway, despite the fact that I'm always connected to the internet. Other browsers do not work either.

  Immediately after that I downloaded the updates of security of firefox that my computer cannot access the internet. I still have a connection without wire fine but Firefox, Internet Explorer, Itunes and other programs no longer have internet access, saying that there is a connection error. I tried to restore my system to an earlier date, but he said that a security plan it prevented to do.

  What is called the safety program? Is this by chance Win 7 Security ? There's a rogue AV app which prevents access to the internet by that name. It comes in many different scents, but it is basically the same product with different names depending on the sound operating system aiming to see screenshot.

  You have another computer, that you can use to download Malwarebytes? Or you can get a friend to download it for you and copy it to a USB key? Download here: http://www.malwarebytes.org/products/malwarebytes_free

  You can use the USB to transfer the program on your own PC and then install it.

• How directly computer access network (via RD + NAT) virtual

  I've been playing with VMWare, and I must say that it is a great and easy to use tool.

  However, I encountered a single problem... the thing is that I am able to access comments from the host (via Remote Desktop), with the help of NAT port forwarding (I use port 9997 on the host, which is redirected to port 3389 off comments, and that market well connecting host-> comments), but Im not able to connect to the guest of the computers on the network local.

  NAT allows the use of such? Would need a different port forwarding to forward the port entering 9997 to 9997 locally on the host machine?

  I spent a lot of time and I have found no solution that could help solve this problem, so I decided to create a new post delivering this problem, hope to get some help here.

  Thank you!

  EDIT: The host is a Windows 7 operating system

  It looks like a person (probably you) 'messed up' the configuration of the network.

  • You use the adapter of the NAT (192.168.137.1) default virtual host IP address to the second physical NIC.
  • The gateway and DNS address in the comments 192.168.137.1 rather than 192.168.137.2 (which is the default value)
  • Virtual host (vmnet8) NAT card uses an APIPA IP (169.254.142.69) address

  Expected configuration:

  • 2nd card physical NETWORK - a free, unused address range
  • Map of the host for virtual NAT - for example 192.168.137.1
  • Settings - The client network DHCP (for example 192.168.137.129/255.255.255.0, gate of entry as DNS server: 192.168.137.2)

  To resolve this situation, I recommend you remove the IP address of the second physical NETWORK adapter and then click on the button "Restore Default" in the virtual network Editor to clean up the virtual network. Then assign an IP address to a free subnet for the second physical NETWORK, but also the second PC card to connect you with this NIC

  André

• BlackBerry software update failed Smartphone, cannot use the phone, but can attach to the computer access to the Internet.

  How to fix the phone. Software of office says "cannot communicate with the device.

  Hi and welcome to the Forums!

  Good job on the recovery! But all is not lost for your data. If you did the update via your PC, then in the early stages of the process should have been a backup of your data (assuming you do not defeat this feature). If you're on a PC, then look for in your entire hard drive to a file with the extension of the IPD (*.) IPD)... check the date and time of the results... created more recently is your best candidate and if all goes well, it was created at the time you did the update. Use this procedure to restore this file:

  • KB10339 How to use BlackBerry Desktop Manager to restore the data to a BlackBerry smartphone from a backup file

  If you use a MAC, I don't know how he does things, but maybe this KB is useful:

  • KB18776 Back up and restore BlackBerry smartphone data on a Mac using BlackBerry Desktop Software 2.0

  If you performed the update OTA or otherwise circumvented the backup data, then you are indeed no chance.

  Good luck!

• Internet computer problem

  Whenever I restart my computer the little yellow warning sign invades my bars wireless in the corner and it won't let me access Internet Explorer, but it says im connected im running Vista, Type compact and I tried everything like another comment here has tried it please help us,

  Thank you

  Gazz

  Hey Gazz II II.

  1. find information or error as well as the sign of yellow exclamation?

  2 when was the last time it was working fine?

  3. did you of recent changes on the computer?

  4. you receive an error message when you open internet explore?

  5. do you have security software installed on the computer?

  6 where it says connected on the computer?

  Method 1

  I suggest you temporary disable any third-party security software installed on the computer and check if you can connect to the internet.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2

  If the previous step fails then I would suggest that you check the status of the wireless network adapter using Device Manager and later, visit the Web site of the manufacturer of the card manually download and install the updated driver for the card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet - online access problems

  I use a wireless home network.  When you access some sites internet the system automatically strikes me offline, and I have to click on tools and work offline button go back online.  For some addresses it keeps switch to offline mode and will not allow me to go online to access the site.  If I go to a different address, it works normally.

  How can I solve this problem?

  Thanks for the help

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• No IPv4 Ipv6 Internet network access.

  Hi I have problems connecting to the internet from my room which I've never had before. One of the other computer is in another room and it says ipv4:Internet Ipv6:Local and mine Ipv6 without network access. Help?

  Hi Kin6591,
   
  1. temporarily disable the firewall and third-party antivirus on the computer for a test.
   
  2. check that the competent services
  =========================
  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
   
  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
   
  b. right click on "Peer Networking Grouping" service and choose Properties.
  c. check if the service is started; If this isn't the case, please click on the Start button and see if it works.
  d. you can also choose automatic next to startup type.
  e. click OK.
  f. Please repeat the above steps with another service: PNRP Machine Name Publication Service.
   
  3 modify the key to register IPv6 to enable IPV6

  ==========================

  
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  a. Click Start, type regedit in the search bar and then click regedit in the list programs.

   
  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.
   
  b. look for, and then click the following registry subkey:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
   
  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.
   
  d. double-click "DisabledComponents" registry key and change the value to 0.
   
  (If the key does not exist, please create the above key and assign a value of 0)
   
  e. exit the registry editor and then restart the computer.
   
  For more information, you can check the link below:
  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008
   
  http://support.Microsoft.com/kb/929852
   
  Hope this information is useful. Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Temporary Internet files Access Denied (System Administrator files and display already)

  Hello

  I am an administrator on my own computer. I was able to view the system folder.

  I've done here: C:\Users\rbucao\AppData\Local

  But I can't access the Temporary Internet Files folder. Can someone help me?

  Thank you.

  See this thread to access the files:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/da4392f7-961B-47d1-98a4-70e6046ac343
  http://Windows.Microsoft.com/en-us/Windows7/view-temporary-Internet-files
  To view temporary Internet files

  1. Open Internet Explorer by clicking the Start button. In the search box, typeInternet Explorer, then, in the list of results, click on Internet Explorer.

  2. Click Tools and then click Internet Options.

  3. Click the general tab and then, under browsing history, clickSettings.

  4. Temporary Internet files and history settings dialog box, click files.

• router Cisco 871 no internet no access

  I am studying and practicing fo my ccnent and I am very new to cisco routers and so far have done well until I tried to access the internet. I have a router 871 which has a switch catalyst 2950 branch above. connected to the switch, is this computer, a router cascading and an external network drive. connected to router cascading is an xbox, ps3 and another computer. on both computers I ping the router and the switch but I can't reach beyond the router to lynksis router that I used to connect to my network. also pingin one computer on the other give me "destination host unreachable".

  This is my config running. Thanks to SD for any advice

  Building configuration...

  Current configuration: 3045 bytes

  !

  ! Last modification of the configuration at 11:25:35 UTC Wednesday, January 1, 2014

  ! NVRAM config updated 11:25:45 UTC Wednesday, January 1, 2014

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname VanRouter

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  enable secret 5 $1$ $0tzK iA3tCXqYHVOHPrM1N2yig0

  !

  No aaa new-model

  !

  Crypto pki trustpoint TP-self-signed-3288281326

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 3288281326

  revocation checking no

  rsakeypair TP-self-signed-3288281326

  !

  !

  TP-self-signed-3288281326 crypto pki certificate chain

  self-signed certificate 02

  30820241 308201AA A0030201 02020102 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 33323838 32383133 6174652D 3236301E 170 3134 30313031 31313232

  33365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 32383832 65642D

  38313332 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100CD3C D7B45599 C442BB9F 7C407C6F 4443DE93 C266494F 5DEE207B 66C9E95A

  A6D99B5F 2880A97E DBB0FB69 745870BA BF29BEE6 23242 HAS 17 A271AAAE 48349CCA

  91 66093 86663331 BA816DB4 6029C7FF 6229F2F3 FE81F9AE 5E4EACBB 1541878C

  A0C89C66 DEAE6AE5 BF372DB7 C8F3E6D5 ED28DC8E C06B60BD 06EC0985 DDF58C07

  010001A 3 69306730 1 130101 FF040530 030101FF 30140603 0F060355 AC8D0203

  551D 1104 0956616E 0D300B82 526F7574 6572301F 23041830 16801483 0603551D

  05465 D 05 D3C5E672 1 060355 1D0E0416 0414836B 91CEBC30 D7B0841A 6BC919AF

  C919AF05 465D05D3 C5E672D7 B0841A91 CEBC300D 4886F70D 01010405 A 06092, 86

  002F41E8 BA660122 148D3F06 8CADBD62 7E26F5A6 506A60EC 00038181 36B 37541

  58F5C139 B8DE5B32 CC1B258B 57988841 3123227F B69D432D 52CC836F 5E51DE5C

  C4B01B53 16F4CC5A BEC27BC0 83AD91B5 1F56181C E3901360 32 54 C 95549 HAS 14551

  18F92BB0 2000BFB9 E29536AF 223F032A 683B8E66 9E554E02 D1E7F631 704A66F6

  222590DC B5

  quit smoking

  dot11 syslog

  IP source-route

  !

  !

  DHCP excluded-address IP 192.168.100.1 192.168.100.10

  !

  van pool dhcp IP

  network 192.168.100.0 255.255.255.0

  default router 192.168.100.1

  Server DNS 8.8.8.8 8.8.4.4

  !

  !

  IP cef

  no ip domain search

  8.8.8.8 IP name-server

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  username 0 privilege 15 password van van

  !

  !

  !

  Archives

  The config log

  hidekeys

  !

  !

  !

  !

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  DHCP IP address

  automatic duplex

  automatic speed

  !

  interface Vlan1

  IP 192.168.100.1 address 255.255.255.0

  !

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  !

  !

  !

  !

  !

  !

  !

  !

  control plan

  !

  !

  Line con 0

  Van password

  Synchronous recording

  no activation of the modem

  line to 0

  line vty 0 4

  privilege level 15

  vantel password

  Synchronous recording

  local connection

  transport input telnet ssh

  !

  max-task-time 5000 Planner

  end

  VanRouter #.

  If you can ping the router on then you should be able to ping from the PC on. Try searching for the source of your ping to the IP Address of the VLAN 1 interface on your router and see if it works.
  In addition, you don't need these static routes:
  IP route 0.0.0.0 0.0.0.0 71.246.236.11
  IP route 0.0.0.0 0.0.0.0 10.1.41.79
  Route IP 192.168.0.0 255.255.255.0 192.168.1.1
  IP route 192.168.1.0 255.255.255.0 192.168.1.1
  IP route 192.168.100.0 255.255.255.0 192.168.100.2

  If you don't want to show up at static routing, you might be able to get directions to RIP on the Linksys. You must have access to the Linksys however.

  At the end of the day, probably you will need to configure NAT on the interface to the Linksys and the VLAN1 interface and then Overload:

  Int fa 0/4
  IP NAT outside

  Int vlan1
  IP NAT inside

  Access-list 10
  Permit 192.168.100.0 0.0.0.255

  IP nat inside source list 10 interface f 0/4 overload

  Sent by Cisco Support technique iPhone App

• Internet wifi access

  I connect to the wifi and it shows that its connected to the network and there is internet access, but when I open internet explorer or google chrome it does not work!

  Hi past.

  Do you receive an error message/code?

  Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router). I suggest you to return the items to solve Wifi problems on the computer:

  Method 1: To reset the TCP/IP stack, try to go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Method 2: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  The problems of Internet connection
  http://Windows.Microsoft.com/en-CA/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: the article above applies to Windows 7.

  Please follow these recommended steps and post if you still experience the problem. I will be happy to provide you with additional options