Virtual paper on Photosmart 7510 jam

Similar Questions

• HP photosmart 7510: alignment of the paper. When I print to my 7510 always prints too far to the right.

  When I print to my Hp photosmart, 7510, wheter be photos via AirPrint on. My IPhone or the Documentation of an environment of windows 7, or Mac os X or even my old windows xP it always prints too far to the right on the paper. This result s in all the text is visible. For photos of the result, is a white edge on the photo and cut off.

  I read manual and I have confidential amputeret that the paper is correctly placed. Else all works well, AirPrint and all absolutely no problem. updated to the last companies

  BECN, I saw this problem caused if ever there was a paper jam and something has filed in the mechanics of the printer. Here is a video on how to check for this:

  http://goo.GL/IDtwa

  Also, just to see if it is more than hardware/software partners, can you make a copy of the scanner and tell me how it turns out?

  Let me know!

• Photosmart 7510: Errors of inconsistency of paper photosmart printer 7510

  I am trying to print my 7510 by using custom paper sizes and get paper mismatch errors.  I use Word for Mac v. 14.4.8 on a Mac under OS X 10.10.2.  I went through all the tips in the HP support pages to try to fix this problem without success.  There is no firmware upgrades or updates of available driver I can find support/HP.  This error is more annoying.  I have not had this problem on my old printers I've foolishly got rid of upgrade to the all-in-one printer. Can you give me any help other than suggests to use the information on the support pages that did not work.  ! have created various paper formats customized in word to see if I could find a magical Assembly which will print and have had no success.  If someone cannot help me solve this problem, it will be the last HP printer that I buy.

  Full of hope for some real help.

  Hey @oldgt!

  Thanks for getting back to me!

  If you see only the media and the quality in the dialog box print, then that indicates that you are using the Apple Airprint drivers and not the pilot series Photosmart 7510.  If the printer does not have the correct drivers, it may not work properly from third-party programs such as Microsoft Word or Adobe Reader.

  To remove and re-add the printer using its drivers:

  1. Click on the apple icon in the upper left corner of the Mac
  2. Click on System Preferences
  3. Click on printers and Scanners
  4. Select the printer and press the minus (-) signs below the list of printers
  5. After removing the printer, click the plus (+) sign below the list of printers
  6. Click "add another printer or a Scanner.
  7. In the add a printer window, select your printer
  8. In the drop-down list 'USE' make sure you only select the series Photosmart 7510 and NOT Airprint
  9. Add the printer and try to print again

  

  

  If please, after back and let me know if this worked for you!

• Photosmart 7510 want to print photos off smart phone on photo paper but ends by printing on a4

  Photosmart 7510, I want to print pictures on my smart phone, when I tried always printed on A4 plain paper even if there is no photo paper in the photo paper tray, im obviously something wrong or missed something.

  I understand you are trying to print photos on photo paper. If you use a device the Hp ePrint home and Biz app android and iPhone download Hp ePrint app download. With the application after you have selected the photo, you can go into the settings and select paper size.

  Let me know if it helps.

• Print on paper with HP Photosmart 7510

  I have a HP Photosmart 7510 and need to print on custom size paper.  Is anyway to do this with the printer HP Photosmart 7510?

  I would try using a different printer driver. I'm a link to a post that can help you.

  Alternate print drivers.

  Let me know how it goes.

• Photosmart 7510 Automatic Document Feeder. It copies a weird size double-sided?

  I have a Photosmart 7510.  I've never used the automatic document feeder and could not find anywhere online how to use it.  I want to know if I can put in a 5 1/2 x 5 1/2 image from a funeral and did copy both sides so she's going to look like a card... all on one as the original.

  Specifications

  Hi grammafaith,

  To copy the size you want through the ADF is not supported. According to the specifications, the larger size of the photo tray is 5 x 7, and use the main charger would cause a paper jam.

  I've included here for 'copy a MultiPage Original' document. I tried as follows on the 7510 I and was able to copy successfully on both sides.

  I've also included the steps here for you.
  (1) place the point on the scanner glass
  2) press the button copy
  3) press the Settings button at the bottom left
  (4) make sure that only 2 sides copy is turned on
  5) Press Start
  (6) follow the instructions on the screen to load the second page / or return the paper and continue

  Please let me know if this has worked successfully for you, thank you.

• HP Photosmart 7510 won't use photo black ink

  I have a photosmart 7510 printer and I am printing from microsoft word 2010 on a windows 8. I print a word with no pictures in document. Printer preferences are on plain paper with normal quality. I can't the printer to use the XL Black ink cartridge. It only uses photo black ink. Is there a setting that I can choose to let him use the regular black ink?

  Hi shirsar,

  I understand that you have a Photosmart 7510 which seems to use a lot more than regular black ink black photo. I'm sorry to hear that, but think I can help you with a solution.

  You can set the printer to use only black ink when printing from the PC and ensures that it uses black ink and no ink picture. My instructions will be set up in the pilot if he does for all programs (if you just want to program it please let me know, and I advise you more). You'll want to start by going to your start screen, and simply start typing devices and printers, and you want to open that (if that is not in the work Panel type and then proceed to open devices and printers). Once the devices and printers is open, right-click on your Photosmart 7510 icon and select Printing Preferences. You'll want to then click on the Advanced Options button at the bottom right of the screen. The next page that appears will allow you to set the printer to use black ink only when printing from the PC (please follow the screenshot below for any clarification).

  

  Hope this helps, have a nice day!

• "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

  "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

  Hi @artdahlink,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

  Maps:
  Card type / size chart

  • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
  • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
  • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

  NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

  There is no guarantee the implementation of a custom paper size to work, however, you can try this method

  • HP printers - creation of custom paper sizes

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• Photosmart 7510 - black ink cartridge does not print

  Recently, I replaced the ink cartridges on my Photosmart 7510 C311A. These are all the "genuine HP cartridges ', full.

  Black ink (with the symbol of the Pentagon) does not print, not at all. I ran through the standard troubleshooting steps:

  Cleaning of printheads

  Cleaning of copper contacts

  * Check for a good evacuation

  My colleague in the corridor as the printer even so I borrowed his black ink cartridge and tried: same problem. The printer does not record that there is a problem, but when I run printing tests, where there should be a black ink, there is absolutely none. All other colors print correctly.

  The printer doesn't lack NOT of the printer "align" test however does not offer a suggestion of what to do from there. I've not seen - in test reports - an indiciation of the misalignment.
  
  Suggestions on what to do now?

  I had the same problem. I had replaced the empty cartridge black and suddenly, no ink. Finally, what has worked is
  (1) I removed all the cartridges and cleaned the copper connectors with wet Publix.
  (2) I got a wet paper towel and he pressed repeatedly on the silver circular vent that would be under the black cartridge. I did until no black came. Let it dry.
  (3) I replaced all the cartridges and on the printer. I went to tools/clean the cartridge. I did it a couple of times and he finally printed black ink! I confirmed by going to tools/align, and align the cartridges successfully. He had kept before crashes when the black ink did not work.

• The photos are not yet (printer Photosmart 7510)

  1 HP Photosmart 7510

  2. Windows 7 64 bit

  3. There are no errors.

  4. I don't have any changes.

  Hello, HP Support.

  I just bought a new HP printer to replace my old HP C4280 printer. Although fine print pages of the letter, I'm struggling to print 4 x 6 photos. Printed images don't print not evenly to the edges of the photo paper. I thought that I put in the incorrect photo paper so I took the photo paper and put it again. Unfortunately, the photos are always printed evenly to the edges.

  Here is an image showing the problem:

  

  I also fought with the same problem and noticed that there are not any helpful solution. After an hour of fiddling and realize that many other people have the same problem because of the design of the printer and the inability of technicians to understand the problem, so I decided to share my solution:

  1. first remove the photo tray and paper in the main tray.

  2. now, look at how work the main input tray sliders... To adjust the front and back after installation of the paper to ensure that it feeds correctly. If this is not the case, the document will at an angle and therefore the white frames uneven or break printing. You can see that the paper comes to tilt slightly and with lines

  3. make sure that put you the paper in the main tray outright and that the two blades are aligned with the paper squarely against the back of the tray.

  4. now make the printer alignment. If you have inserted the paper correctly, you will see that patterns of alignment are also directly and have some space before you start, not not against the side of the paper...

  5. now print a photo in the main paper tray A4/letter... If the document has been inserted correctly in the main tray and you have deselected the option border to print full coverage of Letter/A4 plain paper.

  6. once it works, you can introduce the photo tray again and starts the photo printing. They should also print correctly now.

  Hope that this help that I was about to box this printer and ship back to HP until I thought the paper was poorly supplied due to a bad main tray hugging design which weighed the alignment of the printer, this stuffing your photo printing as well...

  Good impression

• which way until I put A 4 photo paper in my 7510 HP printer all in one

  Hi, what sense until I put A 4 photo paper in my 7510 printer all-in-one with a duplex system?

  The paper must be loaded into the tray with the side to be printed facing down.  The duplex setting is not compatible with the photo paper, you can select single sided.

• Can multiple Photosmarts (7510 and C309g) be configured to scan on the same computer?

  I have an Acer PC Windows 7 with an AMD Athlon X II processor, 4 GB of RAM.

  I have Photosmart C309g and everything-each 7510, both connected via wi - fi, using different IP addresses that are not in conflict with other devices on my network.

  I executed the complete installation for both HPs.

  I can print either, but I can scan only using the 7510.

  When I open the HP scan diagnostic, it does recognize that the 7510 - the c309g is not yet listed.

  I noticed only 7510 application record contains a HP scan application and it also recognizes that the 7510.

  There is no application scan c309g folder.  I tried Win 7 Windows Fax and Scan application but that also recognizes as the 7510.

  1. is there a way to configure the system so that it can print and scan from these two Photosmarts?

  2. If the scanning using a 7510 and c309g does not work, could I use a 7510 both a 7520?

  Hello Osiris43,

  Welcome to the HP forums! I understand that you are unable to scan a document using the Photosmart Premium C309.

  You should have two printers scanning capabilities, because they have a different software. The Photosmart printer using the Solution Center and the Photosmart 7510 uses the Printer Wizard.

  I suggest you uninstall/reinstall the software Photosmart Premium C309. Please follow these steps:

  Please follow this HP document uninstalling the software of the printer.

  Then, perform a clean boot on your computer. I'll give you a Microsoft document on this step here.

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit.

  Once installation is complete, please click on the document to Microsoft, and "how to reset the computer to start normally after a clean boot."

  Please send me your troubleshooting steps.

• Photosmart HP 7510: HP Photosmart 7510 all in compatibility with 5.4 ghz?

  I recently changed my wireless router to work on the 5.4 ghz band and my HP Photosmart 7510 suddenly stopped working.  Turned back on and it works fine.  I guess the 7510 can't 5.4 ghz?  Can someone please confirm?

  If not is there a way to upgrade?   If no upgrade then what new HP All in one wireless printer is compatible with the 5.4 ghz band?

  Thank you!

  I don't know of a wireless printer that supports the 5 GHz band.  As the series limited to roughly half that of the 2.4 Ghz band, manufacturers are reluctant to put it in the printer.   They will always have to say "not move the printer closer to your router.

• Photosmart 7510: Need an installation software

  I had to uninstall my printer to my laptop.  I guess I'd be able to re - install with a download from the Web site, but I am unable to find anything.  The original CD supplied with my printer is now incompatible with my operating system.  Where can I find software to re - install my printer on my computer?  Thank you.

  Hi there @rcohenkim ,

  Welcome to the forums

  I have seen your post about how you want to install your Photosmart 7510 on your Mac of Yosemite and do not have the disc. It's quite normal, that you can click on the link I posted below to help the pilot will need to 10.10.

  Series 7510 C311 Photosmart HP full feature software and drivers

  I hope that helps you with the driver you are looking for