Virtual ThinApp and cross-app application integration

Similar Questions

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the line: sudo etc. but it works. Any id

  Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...

  When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.

• Need to make a distinction between the removal of the application and update app

  Hi, I'm working on an application where I save the files on the SD card and then delete them when I delete the app.

  I used an app application background CodeModuleListener (modulesDeletionPending), it works in case of deletion.

  But the problem is - I want to keep these files when the user upgrades the application, in this case, as we get a reminder in 'modulesDeletionPending', it would be great if anyone can guide me as to what should I do differently during an upgrade.

  Kind regards

  Sarnab

  Hello sarnab2,

  I don't think there is an easy way to monitor this. A secondary application could check at startup if your primary application COD files exist and, otherwise, delete it the data on the SD card and then delete itself:

  http://supportforums.BlackBerry.com/T5/Java-development/can-an-application-uninstall-itself/m-p/3034...

  Erik Oros

  BlackBerry Development Advisor

• Application of music and video app and Microsoft Account username and password

  I use Windows 8.

  I changed my account from Microsoft.

  So now when ever opening the Xbox Music app and video Xbox application it asks for verification. He asked just the password. Looking for a password for the Microsoft account no longer exists.

  So I click on Cancel.

  But when I click on login on the top right button, it then asks the password of the account that does not exist.

  How I completely re-login to both apps with my new account?

  I called Technical Support from Microsoft and with their help, I could solve the problem. To help others who may have this problem (or similar), I will post how I could solve the problem (with the help of Support technique Microsoft).

  The way it was set was:

  First of all, I went to a Microsoft Account for login. Who did all the applications that use the Microsoft account.

  Second, I went to my local account.

  Finally, when I went to the local account that deleted the application login information Microsoft account. This allowed me to login with my account from Microsoft on all my apps. Fixed a problem!

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and everything transferred and has been using the application on an old PC for a while so I'm not sure is this is what is ca

  I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and all transferred to an older Mac and has been using the application on an old PC for a while so I'm not sure is what is causing my problem. I have bank statements indicating payments of my subscription to Adobe for this product update.

  Hi Seth,

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Hope this helps!

• I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop I get an error message telling me to download and install App Office creative cloud so I didn't and it launches the application craps out and gives the sa

  I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop, I get an error message telling me to download and install App Office creative cloud so I do and it begins to it out craps and gives the same message over and over.

  Hi Paul,.

  Migration wizard does not work in the case of Adobe applications.

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• CC and CS6 apps missing from the Application CC2014 handler

  Hello everyone.

  I'm desperate. I had to reinstall Adobe CC and now the Application Manager does not allow me to download previous versions.

  No photoshop, no Illustrator, no sequels, no Indesign...

  I need after effects CC so I can save projects such as CS6. And I need more CS6 for creation!

  This is nuts, I tried everything, uninstalling, re-installing, logout, logging, restart the system, change the language, nothing works.

  Is there something I can do? Please, I beg you!

  Thank you!

  

  Fixed a problem! It was a problem with the email associated with my account. I chatted with an assistant and now everything is OK

• Messages.app (and safari.app) freeze during use.

  Hello

  I updated a machine x 2 weeks from 10.10.4 in 10.11.2. Refresh, I noticed an abnormal amount of horror while using Safari and Message.  Overview of the community of Apple would be appreciated!

  EtreCheck version: 2.6.6 (226)

  Report generated on 05/01/16 15:39

  Time 02:41

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Ignore the known failures of Apple: disabled

  Hardware Information: (Does that mean?)

  MacBook Pro (retina, 13 inches, early 2015)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro12, 1

  1 3.1 GHz Intel Core i7 CPU: 2 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 44 - SN = D865205W070FY5GAS

  Video information: (Does that mean?)

  Intel Iris 6100 graphics card

  Color LCD 2560 x 1600

  Thunderbolt Display 2560 x 1440

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - since the start time: about 6 days

  Disc information: (Does that mean?)

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 999,33 go-go (726,09 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: (Does that mean?)

  Broadcom Corp. Bluetooth USB host controller.

  Logitech USB receiver

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: (Does that mean?)

  / etc/sudoers, 1244, file size but expected 2299

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  /Applications/zoom.us.app

  zoom.us.ZoomAudioDevice [no charge] (1.1 - 10.8 SDK) [click for support]

  / Library/Extensions

  [loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [click for support]

  [loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [click for support]

  [no charge] foo.tap (1.0) [click for support]

  [no charge] foo.Tun (1.0) [click for support]

  / System/Library/Extensions

  com [no charge]. SMSC.driver.LAN7500 (2.0.2) [click to support]

  com.Cisco.NKE.IPSec [no charge] (2.0.3) [click for support]

  [no charge] com.flipvideo.IOUSBCameraMassStorage (1.0.1) [click for support]

  com.joshuawise.kexts.HoRNDIS [no charge] (6 - SDK 10.0) [click for support]

  Startup items: (Does that mean?)

  CiscoVPN: Path: / System/Library/StartupItems/CiscoVPN

  TAP: path: / Library/StartupItems/tap

  Tun: path: / Library/StartupItems/tun

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.MRTa.plist -invalid signature!

  Launch system demons: (Does that mean?)

  [loading] com.apple.FileSyncAgent.sshd.plist -no signature!

  [loading] com.apple.MRTd.plist -invalid signature!

  [loading] com.apple.airplaydiagnostics.server.mac.plist -/AppleInternal/Applications/AirPlayDiagnostics.app/Contents/Resources/AirPlayDi agnosticsServer: Executable not found!

  [loading] com.apple.configureLocalKDC.plist -no signature!

  [loading] com.apple.efax.plist -no signature!

  [loading] com.apple.emlog.plist -no signature!

  [loading] com.apple.gkreport.plist -no signature!

  [loading] com.apple.locate.plist -no signature!

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.apache.httpd.plist -no signature!

  [operation] org.cups.cupsd.plist -invalid signature!

  [loading]    org.net- snmp.snmpd.plist -no signature!

  [operation] org.ntp.ntpd.plist -no signature!

  [loading] org.postfix.newaliases.plist -no signature!

  [loading] ssh.plist -no signature!

  Launch officers: (Does that mean?)

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [operation] com.flipvideo.FlipShare.AutoRun.plist [click to support]

  [failure] com.p5sys.jumpdesktop.agent.plist [click to support]

  [operation] com.sophos.uiserver.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.code42.service.FinderExtensionInjector.plist [click to support]

  [operation] com.crashplan.engine.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [operation] com.flipvideo.FlipShareServer.launchd.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [failure] com.p5sys.jumpdesktop.service.plist [click to support]

  [operation] com.sophos.common.servicemanager.plist [click to support]

  User launch officers: (Does that mean?)

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [failure] com.code42.SharePlan.plist [click to support]

  [operation] com.code42.service.Service.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  [failure] com.zeobit.MacKeeper.Helper.plist [click to support]

  Items in user login: (Does that mean?)

  E-mail application (/ Applications/Mail.app)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)

  CrashPlan menu bar of Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)

  Other applications: (Does that mean?)

  com.adobe.Reader.46752 [loading]

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Microsoft Word

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.AdobeReader

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000c.Microsoft Excel

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000d.EvernoteHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.Microsoft PowerPoint

  [ongoing] com.citrixonline.g2ax.customer.141472

  [ongoing] com.code42.b42menuextra.95392

  [ongoing] com.etresoft.EtreCheck.144992

  [ongoing] com.evernote.Evernote.48352

  com.microsoft.Word.62752 [loading]

  [ongoing] com.Microsoft.AutoUpdate.FBA.94432

  [ongoing] com.Sophos.AutoUpdate

  [ongoing] com.Sophos.Configuration

  [ongoing] com.Sophos.InterCheck

  [ongoing] com.Sophos.notification

  [ongoing] com.Sophos.scan

  [ongoing] com.Sophos.sxld

  [ongoing] com.Sophos.webd

  Plug-ins Internet: (Does that mean?)

  Default browser: Version: 601 - SDK 10.11

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - 10.6 SDK [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  AdobePDFViewerNPAPI: Version: 11.0.13 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.40416.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 7.0

  SharePointBrowserPlugin: Version: 14.5.9 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 11.0.13 - 10.6 SDK [click for support]

  ViewRightWebPlayer: Version: 3.5.0.0 [click for support]

  User Plug-ins internet: (Does that mean?)

  WebEx64: Version: 1.0 - 10.6 SDK [click for support]

  BrowserPlus_2.9.8: Version: 2.9.8 [click for support]

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  ZoomUsPlugIn: Version: 3.5.27367.0922 - 10.10 SDK [click for support]

  Safari extensions: (Does that mean?)

  jbsearch

  3rd party preference panes: (Does that mean?)

  3ivx MPEG-4 [click to support]

  Flash Player [click for support]

  Time Machine: (Does that mean?)

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,33 GB disc used: 273,24 GB

  Destinations:

  [Network] data

  Total size: TB 3.00

  Total number of backups: 82

  An older backup: 21/08/14, 19:49

  Last backup: 30/12/15, 08:39

  Size of backup drive: Excellent

  Backup TB 3.00 size > (disk size 999,33 GB X 3)

  Top of page process CPU: (Does that mean?)

  100% com.apple.WebKit.Plugin.64

  20% WindowServer

  Customer GoToAssist 11%

  3% kernel_task

  1% fontd

  Top of page process of memory: (Does that mean?)

  1.42 GB kernel_task

  1.02 GB mail

  EverNote 688 MB

  573 MB CrashPlanService

  Softwareupdated 475 MB

  Virtual memory information: (Does that mean?)

  2.60 GB of free RAM

  13 h 00 GB used RAM (5.20 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  January 5, 2016, 08:52:24 /Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_2016-01-05-085224_[r edacted].cpu_resource.diag [click for more information]

  January 5, 2016, 03:03:30 /Library/Logs/DiagnosticReports/CrashPlanService_2016-01-05-030330_[redacted].c pu_resource.diag [click for more information]

  January 4, 2016, 06:00:51 PM/Library/Logs/DiagnosticReports/SophosWebIntelligence_2016-01-04-180051_ [redact ed] .crash

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  11. when the test is completed, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  14. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Cannot get the claim code and restore Apps

  I have an Officejet Pro 8600. I managed to install the printer and print the claim code and linked to my account. For some reason when I log into my account it shows not the printer. Also when I go into Control Panel, I can not access all the menus via the icon "eprint" or the "apps". I get the error message is "the eprint feature has been disabled" and "the Apps feature has been disabled. I can't turn them on and I cannot print another application code to connect the printer to my account.

  This is the funniest! I can always send an email to the printer and it prints!

  Any ideas that I am totally lost on this one and want to go back on these characteristics.

  Thanks in advance

  ADE

  Hi Deeperdown,

  Thank you for the information, it is much appreciated.  Your statement of "service is disabled and contact the administrator" is very informative.

  Could you please check your administrator settings in the built-in web server (EWS) for the printer? There is an administrator setting that allows to disable web services.  If you do not know how to access the built-in Web server steps lie in your on page 232 user guide in the section titled "to open the built-in web server".

  Once you have the Web integrated server open please click the 'Settings' tab then click on "Administrator settings" in the left side menu (see screen capture below).

  

  That should bring up a page similar to the screenshot below.  Please ensure that the Web Services, ePrint, and Apps all have.

  

  Once those who are turned on, please turn your printer off, wait 15 seconds and then turn on the printer.  You should now be able to access the web services menu and get your back ePrint.

  HP Officejet Pro user guide 8600

• Scalability and cross-platform Web Viewer features

  If I understand door MEA Mobile apps, our company is interested in using AEMM provided the web viewer is cross-platform capable.

  On the phone, the web viewer support a sensible overview; However, seems to want to launch the application.

  On Tablet (iPad, at least), the web viewer displays the message: "this content is no longer available.  "Download the application to enjoy similar content."

  On the desktop, the experience is good; However, what scalability is possible; as the sensitive available refining?

  This ability would be major for our society - both in the launch of new projects, as well as our full range of editions of the migration.

  The web viewer only works on desktops and laptops. It is not supported on phones and tablets.

  Extensibility for web office viewer is similar to iOS and Android apps. Creating workflow API and most APIs Cordova associated with the application, user, device and content work similarly in web viewer as they do in iOS/Android, but Cordova APIs that are specific to mobile devices (such as the camera and geolocation) do not work in Office web viewer.

• Click directly on the pdf File and my Java application will run

  Hello everyone I have an app a java application which read pdf of the file and display
  the pdf of the dossier on a jPanel, but I look forward how it works because before I can open and read
  PDF file I have to click the intersted and open the jfilebrowser for my java application will open and read the pdf file.
  
  I want that I automatically click any pdf file on my computer with my java application is running and my app will run automatically and will be one who has read the PDF if I double click on any file pdf on my computer.
  
  any idea about this problem? PLSS help. I know this is possible because there is so much software that works like this.
  and I also know that this forum is the best and the center of all java developers.
  
  This is cross-posted from
  http://www.javaprogrammingforums.com/Java-theory-questions/8803-directly-click-PDF-file-my-Java-application-will-run.html
  and
  http://www.thenewboston.com/forum/viewtopic.php?f=119 & t = 10698
  
  I just want to get more information, because my problem is not resolved.

  Click on the PDF File, and my Java application will run

  Java Web Start can implement the file associations for an application. See the file service. demo for more details.

• How to develop and test the application mobile flex without the real device?

  I'm trying to read some information about it, but decided to ask also here.

  I have a project that has a company wants to grow me, it's for iPad. That's ok I am with Flex and the framework for web development, but not for mobile. Why? Because I have no idea how to test my application. I know generation ago it sort of the desktop version of the application with the change of the "back" button on the orientation stuff, but how do I know my application will look and work exactly the same (I mean NOT performance here). I mean you know how every android or iOS device have their native keyboard or native video player for example and I have only in the debug version of the application.

  The question is how to develop this application based on the desktop emulator or anything and then hope that my app looks and works on a device, as it should... Of course I can't afford to buy all the devices it is just to be able to test on it if necessary? So, how do you, how to test how my iPad app works on a device without a? I know I should get a licence from iOS dev to be able to package the app for iOS, but it's $ 99 per year or something like that I can handle, but how to test my application without having to buy the darn device? Are there any emulator for iPad or something like that I know what my customers will see when they get the application? One of my friends told me that the mac os x use the developers a tool - cause some kit of dev who has emulators for all iOS devices and you can build and test there immediately and that you can simulate virtually any combination of key for example, and he said he's working and seems to 1:1 as the real device but he didn't know if can I export an AIR application and try it like this, he only knew for app written in native code.

  If someone can just tell me how should I do this? Should I buy a mac os x computer laptop to test because I am a user of windows 7, or perhaps create a mac os x virtual machine and tests out there or maybe the only option is to actually buy the device... that would be terrible for a freelancer...

  I hope someone can save the day here! Thank you.

  F

  Since the AIR for iOS applications are compiled to ARM code you will not be able to run on iOS emulators running on Mac OSX.

  You can do a very simple test with the "Simulator" built into Flash Builder, but it is not much more than a window to AIR with a window size that matches the resolution of the selected iOS device.  When running in the simulator of the application is not compiled to ARM code so it will take a completely different code path than what will be the final release of iOS.

  Ultimately if you are developing for iOS with AIR nothing but for tests on real iOS devices.

• iOS 10 phone and Message App freeze or Slow

  Hello

  Updated to iOS 10.0.1 on an iPhone 6 s more. T-Mobile carrier.

  After upgrade, phone app may be slow or unresponsive. Message app too slow or not responding.

  Voice mail in the application page phone also buggy. Do not easily play or delete messages.

  I uninstalled bitmoji and removed predictive type as a guess to fix. It did not help.

  All recommendations (with the exception of the hard reset and reinstall)?

  Thank you!

  I have iPhone 5 s and when I type, especially symbol it gel for always up to what I kill and launch this application of msg. He gets to 50% of the time.