Virtualized Windows extremely slow 2011SBS
Hi all
We have a Windows Small Business Server 2011 put in place in a 5.0.0 - 469512 of VMWare ESXi
The hypervisor has 4 machines running, two Debian on, a windows XP and our production SBS2011 Windows
the other three machines have set the parameters of the resources as low as possible and they run OK (it's just a few dev machines)
The server has the following configuration:
Dell PowerEdge R310
Intel Xeon X 3470
Assets of HT
PERC H200 (vmhba2) adapter with disks - a Raid 5 array (at this point I'm not sure weather is the active cache or not)
The Windows SBS is very very very insensitive, copying a file to a storage server is about 200 KB - 3000 kB/s (bytes, not of pieces), which is pretty darn low on a gbit network.
He has 4vCPU with 12 GB of RAM assigned (due to the Exchange, RAM is always a peak level), CPU seems low
ESXTOP:
GID VMNAME VDEVNAME NVDISK CMDS/sec READING/s WRITTEN/s MBREAD/s MBWRTN/s LAT/rd LAT/wr
1490460 sbs2011 - 1 101.47 61,61 39.86 11,12 0.99 9.24 40,19
I'm not sure if the pic in the screenshot
It's really weird. I've seen discussions here on the latency problem, but no solution. I try to check the caching on the PERC H200 (im 80% sure that it has activated).
Any ideas on this subject? I think that the machine should be relatively adapted with this configuration, but it is not
The other three machines have the rest of the resources (i.e. 4 hearts divided between them and 4 GB of RAM distributed as well)
According to this article from Dell http://content.dell.com/us/en/enterprise/d/campaigns/dell-raid-controllers, the H200 does not support the cache and does not support the backup battery. Most likely, the controller has 2 options: writing and rewriting mode. Cache internal hard drive and caching of Windows are disabled in the write-through, leading to the lowest performance mode. This is done to increase the safety of data in the case of a blue screen or a power failure. The other option, writeback mode will cache internal hard drive and improve performance, to increase the risk of loss of data/corruption when if the system does not stop correctly.
If you have good backups and is not a mission critical system you can consider changing the strategy of controller in write-back mode. Otherwise, you should consider getting a RAID controller that has hidden and backup block.
PS I think the controller for the caching policy setting is defined on the virtual disk in the controller configuration.
Tags: VMware
Similar Questions
-
Windows extremely slow 8 update
Blue screen with 2 Installation of 23... poster for ever.
The last time this happened I waited all night and everything was done.
Then I found a solution that solved this recurring problem, but he's back and I can't find where I filed my notes (old age)
Thanks for any help you can give.
Hello
Thanks for the reply.
See the steps in the following link and check.
Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista.
http://support.Microsoft.com/kb/2700567/en-us
Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Note: Applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
-
I updated Lightroom version 6.6.1 version 6.7 running on a laptop running Windows 10 (update of the anniversary). The first thing I tried was to create a panorama of 3 raw images. This operation was a success but it then became virtually impossible to change the image created due to performance extremely slow. The problems I encountered were reminiscent of those I experienced with the initial 6.6 upgrade. (i.e. before 6.6.1).
I have finally returned to version 6.6.1 with performance return to normal. Here's the info system (for 6.6.1) just in case where this assistance.
I wonder when I can expect a maintenance release to fix this.
-David
Version of Lightroom: 6.6.1 [1083169]
License: Perpetual
Operating system: Windows 10
Version: 10.0
Application architecture: x 64
System architecture: x 64
Number of logical CPUs: 4
Speed of the processor: 1.7 GHz
Built-in memory: 8077,7 MB
Real memory for Lightroom: 8077,7 MB
Real memory used by Lightroom: 307.1 MB (3.8%)
Virtual memory used by Lightroom: 263,0 MB
Memory cache size: 80.8 MB
Maximum thread count used by Camera Raw: 4
Camera Raw SIMD optimization: SSE2, AVX
System DPI setting: 96 DPI
Composition of the Bureau enabled: Yes
Exhibition: 1) 1366 x 768, 2) 1366 x 768
Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.
Graphic processor News:
GPU Intel(r) HD 4000
Check the supported OpenGL: past
Vendor: Intel
Version: 3.3.0 - Build 10.18.10.4358
Renderer: Intel(r) HD Graphics 4000
LanguageVersion: 3.30 - Build 10.18.10.4358
Plugins installed:
(1) home canon Plugin
(2) Facebook
(3) Flickr
(4) attachment Plugin Leica
(5) attachment Plugin Nikon
Config.LUA flags: None
Map #1: Vendor: 8086
Feature: 166
Subsystem: 124d 1043
Review: 9
Video memory: 32
Map #2: Seller: 1414
Device: 8 c
Subsystem: 0
Revision: 0
Video memory: 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: SAMSUNG (Intel (r) display Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x102
Direct2DEnabled: false
GL_ACCUM_ALPHA_BITS: 16
GL_ACCUM_BLUE_BITS: 16
GL_ACCUM_GREEN_BITS: 16
GL_ACCUM_RED_BITS: 16
GL_ALPHA_BITS: 8
GL_BLUE_BITS: 8
GL_DEPTH_BITS: 24
GL_GREEN_BITS: 8
GL_MAX_3D_TEXTURE_SIZE: 2048
GL_MAX_TEXTURE_SIZE: 16384
GL_MAX_TEXTURE_UNITS: 8
GL_MAX_VIEWPORT_DIMS: 16384,16384
GL_RED_BITS: 8
GL_RENDERER: Intel(r) HD Graphics 4000
GL_SHADING_LANGUAGE_VERSION: 4.00 - Build 10.18.10.4358
GL_STENCIL_BITS: 8
GL_VENDOR: Intel
GL_VERSION: 4.0.0 - Build 10.18.10.4358
GPUDeviceEnabled: false
OGLEnabled: true
GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_texture_edge_clamp GL_EXT_separate_specular_color GL_ARB_multitexture GL_ARB_map_buffer_alignment GL_ARB_conservative_depth GL_EXT_ texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_SUN_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_texture_filter_anisotropic GL_ ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture_rectangle GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_occlusion_query GL_ARB_ GL_ARB_fragment_program GL_ARB_vertex_program fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_ARB_fragment_program_shadow GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_texture_float GL_ARB_pixel_buffer_object GL_ARB_draw_instanced GL_ GL_EXT_framebuffer_object ARB_half_float_vertex GL_ARB_occlusion_query2 GL_EXT_draw_buffers2 GL_WIN_swap_hint GL_EXT_texture_sRGB GL_ARB_multisample GL_EXT_packed_float GL_EXT_texture_shared_exponent GL_ARB_texture_rg GL_ARB_texture_compression_rgtc GL_NV_conditional_render GL_ARB_texture_swizzle GL_EXT_texture_swizzle GL_ARB_texture_gather GL_ARB_sync GL_ARB_framebuffer_sRGB GL_EXT_packed_depth_stencil GL_ARB_depth_buffer_float GL_EXT_transform_feedback GL_ARB_ transform_feedback2 GL_ARB_draw_indirect GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_ARB_framebuffer_object GL_ARB_framebuffer_no_attachments GL_EXT_texture_array GL_EXT_texture_integer GL_ARB_map_buffer_range GL_ARB_texture_buffer_range GL_EXT_texture_buffer GL_EXT_texture_snorm GL_ARB_blend_func_extended GL_INTEL_performance_queries GL_INTEL_performance_query GL_ARB_copy_buffer GL_ARB_sampler_objects GL_NV_primitive_restart GL_ARB_seamless_cube_map GL_ ARB_uniform_buffer_object GL_ARB_depth_clamp GL_ARB_vertex_array_bgra GL_ARB_shader_bit_encoding GL_ARB_draw_buffers_blend GL_ARB_geometry_shader4 GL_EXT_geometry_shader4 GL_ARB_texture_query_lod GL_ARB_explicit_attrib_location GL_ARB_draw_elements_base_vertex GL_ARB_instanced_arrays GL_ARB_base_instance GL_ARB_fragment_coord_conventions GL_EXT_gpu_program_parameters GL_ARB_texture_buffer_object_rgb32 GL_ARB_compatibility GL_ARB_texture_rgb10_a2ui GL_ ARB_texture_multisample GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_timer_query GL_ARB_tessellation_shader GL_ARB_vertex_array_object GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_texture_cube_map_array GL_EXT_gpu_shader4 GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_shader_subroutine GL_ARB_transform_feedback3 GL_ARB_get_program_binary GL_ARB_separate_shader_objects GL_ARB_shader_precision GL_ARB_vertex_attrib_64bit GL_ ARB_viewport_array GL_ARB_transform_feedback_instanced GL_ARB_compressed_texture_pixel_storage GL_ARB_shader_atomic_counters GL_ARB_shading_language_packing GL_ARB_shading_language_420pack GL_ARB_texture_storage GL_EXT_texture_storage GL_ARB_vertex_attrib_binding GL_ARB_multi_draw_indirect GL_ARB_program_interface_query GL_ARB_texture_storage_multisample GL_ARB_buffer_storage GL_ARB_debug_output GL_KHR_debug GL_ARB_arrays_of_arrays GL_INTEL_map_texture GL_ARB_texture_ compression_bptc GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_robustness GL_EXT_texture_sRGB_decode GL_KHR_blend_equation_advanced GL_EXT_shader_integer_mix GL_ARB_stencil_texturing
Have you disabled GPU treatment?
I noticed from 6.6.1 to 6.7, in my case anyway, I had the GPU disabled in order to speed up the system. And in your case the HD4000 Intel isn't a particularly fast GPU and has ~ 100 MB of vRAM dedicated.
-
Internet on Windows 10 extremely slow
My Mac Pro has recently been having a strange problem. When I open the boot camp menu by pressing the option key, when I try to select Windows, it displays a BSOD. However, when I leave the default at startup, it works fine... except, however, for the extremely slow speeds (7 Mbps compared to the usual 130 Mbit/s). Does anyone else have this problem? It is a new Mac Pro, so it is not old or anything.
You can run the SMC Reset and NVRAM Reset and test?
Reset the management system (SCM) controller on your Mac - Apple Support
-
The day before I had defragment the hard drive and do a "Disk Cleanup" after many months. Laptop was significantly faster. Then, there was an automatic update of Windows and now the laptop is extremely slow. Any suggestions as to what I should do next? Thanks to you all!
Hello
· There were several updates installed?
· Have you checked the problem in safe mode?
Check to see if the following is useful.
Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.
Method 2: Log on to the computer manufacturer site and check if you have the latest drivers installed.
See also:
Increase the speed of the PC: optimize your computer, help your PC run faster
-
Windows Live Mail extremely slow
Read your own posts, but they offer no concrete solution.
Windows Live Mail is extremely slow on all actions, such as selection, type, transmission, reception, everything, to the point where it is impractical and unusable.
I have a brand new HP Elite, Windows Vista Home Premium x 64, to this day, virus scanned, etc.. All programs work well, including Windows Mail. But Windows Live Mail service is really too slow to be of any use.
I have not agreed to update to IE8 because of many problems posted with it, that's why I continue to use IE7.
Is there a real fix to the extremely slow problem Windows Live Mail? The plethora of forums and posts on this specific topic, it seems that we, potential users are out of luck. Please advice and correct.
Hi Melachrino,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the Live and would be better suited to the online community. Please visit the link below to find a community that will provide the support you want.
http://windowslivehelp.com/community/
JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Vista Ultimate EXTREMELY slow
OK, so I installed Windows Vista Ultimate on my computer, I like it, but it is extremely slow.
The shape of plug the computer are as follows:
AMD Sempion 1.64 Ghz processor
480 MB of RAM
HDD 40 gig
This should be enough to start. I wonder how can I speed up a bit I've run Diskcheck and defrag and Dick Clean-up with very little progress. Just don't have the money for the extra RAM right now either so if there is a way to speed it up without buying extra RAM, I would like to know.
On Monday, May 24, 2010 20:53:04 + 0000, smokeybear2011 wrote:> Ok, so I installed Windows Vista Ultimate on my computer, I like it, but it is extremely slow.>> The card form the computer are as follows:>> AMD Sempion 1.64 Ghz processor>> 480 MB of RAM>> 40 gig hard drive>> Which should be enough to start. I wonder how can I speed up a bit I've run Diskcheck and defrag and Dick Clean-up with very little progress. Just don't have the money for the extra RAM right now either so if there is a way to speed it up without buying extra RAM, I would like to know.It's no surprise that it is extremely slow. You have * way * too littleRAM and you will never get a decent performance with this amount. 1 GBis the minimum necessary for performance * beginning * becomeacceptable for people whose needs are very light (because their)using the application is light). But for almost everyone, is at least 2 GBreally need or that you are satisfied with the performance.In addition, a 40 GB hard drive is * small *. This isn't a performance problem,but unless you do not do much with your computer, you will be runningmore disk space very soon. You should have at least 160 GB or more.--Ken BlakePlease reply to the newsgroupKen Blake
-
Windows 7 is extremely slow to return to the screen saver mode.
I installed upgrading Windows 7 on my computer and everything is fine. However, when the system is idle and past in mode screensaver (with or without a password), the return of the screen saver mode are extremely slow (just a white screen). It is sometimes quick, sometimes it comes back in 3-4 minutes, but most of the time it takes a long time.
The system is a low end, but more than enough to manage w7. It consist of:
Pentium dual core (2140)
2 gig memory
NVIDIA 7300GT 256MI tried to delete the zone alarm security suite, does not solve the problem
thought it was the HP 2610 print software, removed and still happens.
update the bios (MSI p4m900)can someone figure this. Is there something that prevents him to return to the desktop.
Note that, I try to reboot from the blank screen by pressing the windows, right arrow, return. But I think also, it does not address key strokes.
THX
I found a way to fix it! I did this:
1. Press win + r and run msconfig. Go to tools and brand to troubleshoot the computer, and then click Start.
2. then go to system and security and press electricityballance (not sure of the name in English because I have a Norwegian version..).
3. restart your computer.
4. my screen saver was not afterwards, but I gave it to display photos and now it works perfectly!
When I checked the general tab afterwards, it did not have the checkbox to use the... start (a last..) one has been verified and the second has a blue full mark.
-
Windows is extremely slow when it starts up and opening programs. Some programs, including other words will not open at all. The computer hangs when I try to open it. I think having a virus. Help.
Thank you
HEN47
Boot minimum use
Uncheck everything except your antivirus program
https://support.Microsoft.com/en-us/KB/929135
See if these updates are installed or not KB3020369 & KB3172605
If not install them
The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.
Sometimes, it is best to make sure that windows update service is really off before manually installing updates
Switch back to default after installation that has never is missing.
Download page main for KB3168965 for all windows,
https://TechNet.Microsoft.com/library/security/MS16-090
Win - 7 32-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=53187
Win - 7 64-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=53209
Then manually install it,
Customer of June included in this update rollup, update
Download page main for KB3161608 for all windows,
https://support.Microsoft.com/en-us/KB/3161608
Win-7 32-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976
Win-7 64-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974
After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.
-
Windows 7 extremely slow startup
I have an extremely slow Windows 7 startup time. It takes 3-4 minutes to start and then 2-3 minutes before I can actually use the computer. I went into Ms-config and especially disabled services at startup, I got him to start with all my carrots and RAM MAX I tried Glary Utilities and Kingsoft PC Wizard to try to improve the startup time. Nothing did.
My specs:
Motherboard: AMD 760G Chipset
Graphics card: AMD Radeon R9 x 270.
CPU: AMD FX - 4100 Zambezi overclocked to 3.8 GHz
RAM: 8 GB DDR3
Hard drive: 1 TB with about 450 GB of available.
I cannot fail to plug, and Windows works fine, once it gets past the 6-8 minutes to before I can actually use it. It's incredibly frustrating is the slowness. I'm open to suggestions. I have alos repeatedly run Norton anti-virus and found no viruses or issues.
After another reboot, it seems that the deletion of my anti-virus, corrected the problem of slow start. She went from 4.5 minutes to about 1 minute and 20 seconds.
-
Windows 7 goes extremely slow and freezing frequently
I have HT a windows 7 operating system and it goes extremely slow and freezes frequently. You guys you will suggest what the problem in this case and how to resolve this kind of things? I want a little format. Thank you.
Hi Nazaz,
1. What is the number of brand and model of the computer?
2. don't you make changes on the computer before this problem?
I suggest to start the computer in safe mode and check if it helps.
Method 1:
Step 1:
See the link to start in safe mode.
Start your computer in safe mode
Step 2:
If the computer works fine in safe mode, I suggest you perform the clean boot.
See the link to perform the clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»
Method 2:
Optimize Windows performance
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Additional information:
8.1 Windows, Windows 8 or Windows 7 hangs or freezes
http://support.Microsoft.com/kb/2681286/en-us
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
How to speed up your slow computer
http://support.Microsoft.com/kb/2746761/en-us
It will be useful. Back to us for any problem related to Windows. We will be happy to help you.
-
I tried to access to the shared both directory a Vista and XP machine via cable connections and wireless to my Win 7 64 bit machine on the part and it is extremely slow to read, but not written. Not only the directory never takes show all thumbnails, and then open a file that is a couple mb in size as a photo takes more than a minute. However, if I try to write the same file sharing, it takes only 5 seconds. This fine all worked until I went from the version release candidate for the final version a few weeks ago. Shared directories exist on another partition for the relocation does not have their effect.
Maybe it helps diagnose the problem... I just make a copy of a picture of 4 MB on the part of win 7 on my win xp desktop and it took about 1 minute. I renamed the file on my desktop and tried to write to the share and it took 5 seconds . Now, it's strange. So, this is the bed that would take forever. The Scriptures are fine, which also explains why my nightly backups on the part of win7 are very good.
I have a machine to hit the share by using the name of the computer and the other using the ip address. Both show the same problem...
I also tried to access files using a mapped network drive.
I can take a 4 MB file and just copy it on my local desktop and it takes about a full minute. However, written the same file or even another file of the same size as the part only takes about 5 seconds.
I ran the Windows 7 network troublshooter last night and used the troubleshooter for incoming connections and he says that it found a problem but that he could not fix and he really had nothing to help me. But I think he sent the information in Microsoft... not sure. Next time, I'm at home, I'll run again and try to put all the gross results that I could not understand in this thread.
I've also updated my driver for the network card and redone permissions and actions several times. The only thing that I can also say that something can highlight, it is that when I was using the RC of windows 7, I don't have this problem at all. It was my first installation of Windows 7. I reinstalled from the final version and all of these files already exist on another partition on the same drive. I just had to move my public and directories user space on the D: partition and share everything. Maybe the new facility with something on the existing structures of the file works well with the new facility of the former? But this does not explain why a new directory and file that create displays the same behavior. I'm thinking out loud a bit to see if it helps that anyone think that anything...
I thought about it!
At least for me, it was a setting in the Advanced tab of the network adapter. I have a Realtek Gigabit network card and one of the places must have been missed incorrectly.
I changed the 2 following settings to "disabled", and he immediately started working very well.
Disabled IPv4 Checksum Offload
People with disabilities large send Offload (IPv4)I have a suspicion that among recent updates of Microsoft for this driver he missed bad... but it was this or the latest driver from Realtek.
Update:
In other research I have narrowed it down to make it just the Large Send Offload value. Is located on "activated" whenever I update the driver Realtek to the latest version. If I then go and set it to "Disabled", everything works fine.
-
System is extremely slow when you try to install Windows XP.
My laptop will Boot but his extremely slow, slow snail.
My laptop will Boot but his extreme slowness. I have a laptop currently has NO operating system on it because I erased the HARD drive because I had a shit installation of Windows XP Professional x 64 Edition (triple). My specs are Intel SU2700 processor EM64T(1 core) to 1 .3GHz 6 GB of Ram and 320 HARD drive. My problem is that my laptop is running very slowly when you try to perform a clean installation of Windows 7 x 64. The model is Acer aspire 5810TZ. I tried to boot WinPE for ghost, which took 45 minutes, I tried to start another installation CD, same result, Windows 7 installation cd starts, but it is the 'starting Windows' for over half an hour. It seems to be without performance problems when you access the BIOS Setup. I tried to start another medium such as floppy disks, external HARD drives and Flash Drives, same result, I have no idea what to do, the sata mode is in AHCI Mode. IM thinking CPU issues.
Hello
I suggest you to contact the computer manufacturer to verify if there are hardware problems. -
Lightroom showing constantly "unresponsive" and very slow since the last update. With the help of Windows 10. Extremely slow import!
Hi Dear
Please see this thread windows Lightroom CC 10 'unresponsive' number.
Let us know if this helps
~ Assani
-
Extremely slow running VM XP in Windows 7 (7 post)
I'm running a Windows 7 thinkpad with 4 GB of ram and a 2.4 GHz processor. When running an XP VM, I get unusually high processor utilization. I ran the same configuration (a laptop even slower) under WS 6.x with much better results. No idea as to what could happen? I've attached a screenshot of its use within the virtual machine.
The host is Windows 7 RTM and virtual Windows XP SP3 machine.
Thank you.
Why you set up a virtual computer with 2 processors - your host should have at least 4 cores before such a framework works well.
But in this case, I guess that there is also something wrong with the USB - if you do not need USB disable for a test
___________________________________
Maybe you are looking for
-
How to remove Firefox from Google data for me to master password CHG
I have had my master password. Support instructions are to remove these data from Google.
-
HY, I want to 7211tx dv6 and windows8... im not sure what drivrs should I download... I need drivers alll...
-
where can I find the full version of Microsoft Live Photo editing
I would like to know where I could download the full version of Windows Live Photo editing online.
-
Dell Bkup &; Recov Premium fails to initialize the disc ext USB
Hello Already posted at the forum of Win8 in error - sorry. Once using pre installed version of base to factory and backup to two key USB drivers, I just upgraded to premium. My XPS Win8.1 recognizes my new drie empty of Usb3 (1 TB primary NTFS) Dell
-
I work in Captivate 9.0.0.0.223. I created amodel with a few slides that will be a standard check for all the lessons.In the theme of the model, I have a number of types of slides matching for thedevelopers to choose during production. A wagon type,