Error 0x800700AA (VISTA BACKUP FILES) _

Similar Questions

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

• Catastrophic error 8000FFFF in backup file

  Original title: catasophic Error 8000FFFF in backup file

  Auto / annex tried manual, copy the disk, Mr Fix - it etc file backup does not

  Hi Bosco,

   

  .  Which Mr. Fix - it have you tried?

  Please follow the link:

  Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)":

  http://support.Microsoft.com/kb/973558

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  I hope this helps.

• reinstall with vista backup files

  I have a toshiba laptop satellite series I have upgraded from vista home premium to before windows 7 to do this I have backup files on dvd everything was great.  Now I reinstall vista with recovery disc, is possible to reinstall my dvd backup files.

  TKS

  jeanpro30

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista backup file is not visible

  Using the backup feature in Vista, I managed (under Vista) saved 200 + GB of my PC hard disk laptop.  I know that it worked because:

  1 - unused space on the hard drive laptop declined significantly

  2 - I was able to restore files from the portable hard drive

  HOWEVER, according to the help Windows, a file "Backup set Date" was created, but I can't - it is not visible.  How can I make it visible?

  Thank you

  Hello

  Check if the file is hidden:Show hidden files

  Backups are saved in this format: ------\Backup Set . For example, if your computer name is computer, your backup location is E, and you saved on April 2, 2006 at 16:32, that the backup occur in the value of E:\Computer\Backup 2006-02-04 163200. You would right-click the folder named Backup Set 2006-02-04 163200 to delete this backup.

  When you perform a full backup, a backup folder is created and labeled with the date of this day. When you add updates, this date remains the same, but your backup is not expired. The next time you perform a backup completes, a new backup folder is created and labeled with the date of this day, and updates are then added to that new folder. Do not remove the current backup folder.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Errors in Vista .wps file extension

  I have some old files I still sometimes use that have the file extension *.wps.

  I had an XP PC that would open up the files formatted in MS Works.  I just bought a new laptop Vista and when I try to open the same files, it says either they are in use or corrupt.  If I have the CD go back to my old XP PC, files opened well upward.

  Does anyone have a solution for this, I need the files in the format that they were saved, open in Wordpad in Vista create a havoc-PLEASE HELP!

  Hello Fahey, welcome.

  If you are running Microsoft Office 2003 Vista, this addon provided by Microsoft will allow you to open WPS files created in Works v6-9. If you run Office 2007, this addon may not work, but its worth by train.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=BF41401E-70FA-465D-AE2E-CF44DBF05297&displaylang=en

  Download and install. Furthermore, if this does not work, you can try this:

  1. create a backup of the file WPS (basically copy and paste it in another folder)
  2. go to: http://www.zamzar.com/
  3. follow the instructions to convert the file online

  Let us know if it works,

  Thank you!

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• How to restore Windows Vista backup on Windows XP computer?

  I was about to lose my hard drive on a computer with Vista Home Premium. Stored on an external hard drive. Not able to find my Vista rescue cd, I so installed XP Professional I've had. Attached to transfer backup files, but will not transfer.

  Original title: Save transfer problemsproblems

  Hi Marty,

  Windows Vista backup files are in. Disc format hard virtual which is only supported in Vista. You would have to restore them on a computer that is running Windows Vista and then copy the contents of the Windows XP computer.

  See also: back up and restore: frequently asked questions

  How Windows Vista backup uses zip files to store backups (and how to extract the zip files)

• When you restore the backup files in Vista, get error "the parameter is incorrect."

  I reinstalled my windows vista cd and all my files was erected to another area of my computer for the back, but I don't know how to restore them for use on my laptop. How to restore my stored backup files? It's there, but there are errors such as (the parameter is incorrect)

  Hello

  "and all my files was erected to another area of my computer to school."

  do you have you will actually cost the files yourself or did it do for you through the recovery process

  If this has been done by the recovery of computer manufacturers as part of the resettlement process, you will need to contact the manufacturer of the computer

  If you have saved the files yourself, read this:

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• Vista backup does not - restore error 0x8100001A

  My hard drive has been replaced, and I've tried using restore files via Vista backup and restore (Home Premium).  I followed the Advanced Restore from another PC, can see the backups, there are several dates of backup choice, but I get 0x8100001A error when restoring.

  The last backup was interrupted when the drive crashed.  I'm trying to restore the one before this one.  The backup drive letter has not changed.
  I have a new HARD drive, installed vista, caught all the Windows updates, installed all the programs and I'm trying to recover the backed up files.  None of the online help suggestions have worked.  Looks like the next suggestion is to recreate a corrupt Mediaid.bin file, which could have damaged when the last backup was interrupted.  How do I do that?  It is possible to rebuild is based on a previous backup?

  Hi louithibo,

  I understand that you refer to the following article:

  Error message when you use the option restore files to restore a backup file on a Windows Vista-based computer: "the restoration has not completed successfully. "Error code: 0x8100001A.

  http://support.Microsoft.com/kb/940263

  You can follow the steps mentioned in the link below, which deals with a similar question:

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/56f5ed9b-8722-4fa8-b1e9-9c17d7132feb

  Contact Microsoft Customer Support Services (CSS) to help rebuild the Mediaid.bin file, see the link below:

  http://support.Microsoft.com/kb/295539

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 0 x 81000005 on the Windows Vista backup - home

  Please help me. It is the 2nd request for the same problem. I can not get a backup on Windows Vista. Keep 0 x 81000005 error - get the message on the desk and say: low disk space. Checked the recovery drive D and available space is 0. Help me before I got a real big problem.

  Thanks in advance for your prompt response.

  David Baumgardner

  Please help me. It is the 2nd request for the same problem. I can not get a backup on Windows Vista. Keep 0 x 81000005 error - get the message on the desk and say: low disk space. Checked the recovery drive D and available space is 0. Help me before I got a real big problem.

  Thanks in advance for your prompt response.

  David Baumgardner

  You are unable to make the back because you've done your backup file in drive D: that is your recovery Partition. You are NOT supposed to do.
  Recovery partiton has a very small disk space, no time to fill up the partition.
  Read this...

  Your recovery partition D is implemented by the manufacturer of your computer in the event of serious problems in your system.
  You use it to restore your system.

  You're NOT supposed to touch it... not to add or remove anything from or to it.

  Have you been using the D drive for scheduled backups of file?
  If this is the case, you call the manufacturer of the computer, tell them the situation...

  1. ask for a set of recovery DVD to reinstall Vista, if you do not have a game made yourself.
  2. ask how to remove backup files or elements that are NOT supposed to be there.
  They created the recovery partition, they know how to take care of it.
  Let them teach how you to.
  ..................................................................................................................

  RE: d ' training is complete

  D: is the recovery Partition to your computer at the factory standards,
  and to make you recovery disks from!

  Contact * Dell * purchase DVD recovery and fixation of your recovery Partition.
  They know exactly which files have to be there and those who you
  delete!

  In the future, buy an external hard drive and back up to that.

  * Editing: Michael Murphy responded to a user with a Dell computer. **
  --
  Mick Murphy - Queensland - Australia
  Reference link:
  http://www.Vistax64.com/Vista-performance-maintenance/158580-d-drive-full.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Notice of continuous error 0 x 80070002 after update to it. Can not backup files.

  Trying to back up files on a unit of Verbatim and continually get ox80070002 error message after downloading the fix for this.

  Hi John,.

  1. What backup software that you are using?

  2. at what stage of the backup process, you receive the error code?

  If you use the Windows Backup & Restore feature, you can follow the steps in this link & check if the problem persists.

  Error message when Vista backup (0 x 80070002)

  Hope the helps of information.
  Please post back and we do know.

• Windows Vista restore files from backup to external HDD

  I put the Vista backup center to do a weekly backup on an external hard drive.  However when I try to restore from it using the wizard it will not work.  Although he seems to know that the drive is there and shows even the dates of the back-ups, he did it, by clicking on them produces no result.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I put the Vista backup center to do a weekly backup on an external hard drive.  However when I try to restore from it using the wizard it will not work.  Although he seems to know that the drive is there and shows even the dates of the back-ups, he did it, by clicking on them produces no result.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey theplanisreal

  tutorials how to back up files and restore them

  see if that helps you

  http://www.vista4beginners.com/how-to-backup-your-data

  http://www.vista4beginners.com/how-to-restore-files

  Walter, the time zone traveller

• Restore backup files after the new installation of Vista

  I recently had to replace my main hard drive as it has completely crashed and burned.  Fortunately, I thought, I had been diligently backing up to an external hard drive.   So after replaced by a fresh hard drive and a new installation of Vista, I thought I could just restore these files from backup... but no luck.  New Vista does not recognize the old Vista backup.  And it will allow me to migrate these files in any usable fashion.  Is it possible for me to get the new Vista installation to access these backups from the previous installation of Vista?

  Hi Allisonerik,

  (1) what happens when you try to restore?

  (2) you get an error message?

  (3) was it a file, or a backup system image?

  I want to clarify if your backup media (external hard drive) is recognizing in Windows.

  Method 1: Put the computer to boot and then check to see if you can restore

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: Check your external hard drive to find errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  See the links below

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.