Vista: Common Internet disconnects and restart required

Similar Questions

• Internet disconnects and cannot find wireless network periodically. I have to restart to fix it temporarily.

  SOMEONE HELP ME PLEASE!  I have a very old laptop, since 2002, I think, that is running XP Home. Recently my laptop started to cut all of a sudden and then cannot find the wireless network. I know that this is not the WiFi because my other laptop works very well. When I restart the laptop, it works up until I try to download something and sometimes turns off while I'm browsing. I have a RTL8185 wireless card, which I replaced it with the same model. Still no change. I spent weeks in different forums, try to understand this point, and I don't have a chance.

  I thank very you much for your time. I called my ISP and he told me to try restoring the system to determine if it was the settings or if it was the hardware. Instead, I decided to search the Internet how to speed up my network because Chrome was really slow on the cell affected.

  I happened to run across this Web site
  http://tweaks.com/Windows/37934/hacking-Windows-XP-speed-up-your-network-and-Internet-access/
  When I disabled all protocols except TCP/IP Protocol, the network WORKED! Now the Internet works, I can download large files and browse shared files with the same speed as my other laptop!
  I hope this can help someone else with this problem!

• Why is firefox still crashing, internet disconnection and also insensitive past? its boring

  its always crashing, disconnection or go to unresponse, I want to know why its doing this and how I can stop it, and I can not use another browser, they're even worse sometimes

  Follow the instructions above.

  Safe mode is a troubleshooting mode that turns off temporarily
  hardware acceleration, restores some settings and disables
  -Add-ons (extensions and themes). If the problem disappears,
  that tells us something. If it is not the case, this tells us something else.

• Satellite A300 with Vista 32 bit stops and restarts rendomly

  Hello

  PC randomly just resart, no interval.
  I've restored the PC to original factory of the partition.
  I have installed new bios (1.8), was 1.3.
  I tried a lot of suggestion of internet post but not luck.
  All microsoft updates are applied.

  Wat I noticed is that if I boot in ' Standalone or Sandalone with internet: PROBLEM STOPS. "

  Any help appreciated,

  Kind regards

  Eric Eric

  Hello

  May I ask if you have noticed a high temperature, while the laptop stops automatically?
  Usually, the high temperature is the main reason for this unexpected closure of the bottom.

  The high temperature may appear if the cooling module does not work correctly because of the dust or debris inside the fans.
  Cleaning if this can be useful.

  I clean my fans from time to time with the help of compressed air jet and it's good enough to clean the fans

• Vista, loss of internet connection on cold start and restarts.

  I use windows Vista, recently (after only 4 years of satisfactory used) I lose the internet connection on cold starting and restarting and duty use windows diagnostics to establish the connection.  I bought a new Modem Sagem, and cable ethernet and filters, still the problems persists.  ISP tells me that the problem is with Vista, can anyone help please?

  The game may 17, 2012 03:43:10 + 0000, BIGKEV2257 wrote:

  I am not satisfied by McAfee, three days and three nights, waiting for their technicians to ring me, I get automated emails asking if I'm happy and saying that they can not communicate with me, seems since Mr. McAfee sold his company, that it went to the pack, and I understand not why Microsoft sell McAfee with new computers when mcAfee are not appropriate technical support.

  Two points:

  1. in my opinion and that of many others of us here, McAfee is one of
  the poorest choice of security these days software here. I strongly
  recommend you take and replace with eSet NOD32 or
  Kaspersky, if you are willing to pay for it. If you want a free
  antivirus, I recommend one (do not run more than one antivirus
  program) of three of the following:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program such as)
  Microsoft Security Essentials, with integrated anti-spyware capability
  It). I recommend that you download and install MalwareBytes (freeware)
  AntiMalware
  2 Microsoft isn't selling McAfee with new computers. Microsoft
  is not even do or do not sell computers. If your computer comes with
  McAfee, it's because the manufacturer of your computer (Dell, HP,
  Gateway, or anyone else) has chosen to sell like that.

  Ken Blake, Microsoft MVP

• Windows Vista was slow so I restarted and now my internet is very slow. Try to run updates, but I get error code 80072EFE.

  original title: SLOW INTERNET

  I restarted windows vista because he was running like junk. Now the computer works normally, but the internet is PAINFULLY slow. It worked until I reinstalled vista. My cable is in working condition. I can only load half of a Web page if I'm lucky. Is there a port or something that I need to open to let my internet go to more than 9 bytes/second? I have to ask this on another computer because it would take 6 years for this thing to load. I get error Code 80072EFE when I try to update. Help me because im losing all faith in microsoft.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:

  For Windows update, error check this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  It will be useful.

• the host is disconnected and require restart to vcenter

  Get a problem for the host is disconnected and only a reboot of the host gets their return to vcenter.

  Is there an upgrade performed recently at 5.5.

  See you soon

  Petter

  Something goggle and beneath the article, suggest you give a try to this...

  VMware KB: Activation or deactivation of VAAI ATS heart rate

  Concerning

  Rahul

• When running Vista Home Premium 64-bit. I disconnected and reconnected to my work programmes often... where calls interrupted

  I had my internet provider here at least 10 times in the last 2 weeks. They see no problem.  I gave my computer to Microsoft, he ran and saw no problem.

  But I still have questions!  Even online game (poker), you can see where it disconnects and reconnects repeatedly.

  Can any help...?

  Hi LoriBob,

  1. is the part of the computer from the domain?
  2. when the last time programs worked well?
  3. What is the type of internet connection you use?
  4. only happens to the programs or even disconnected Web sites?

  If this only happens with online programs, it is possible that some third-party programs installed on the computer is behind internet connection dropped.

  I suggest that you do check and clean boot, if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If the problem persists then you need to update the network adapter drivers on the computer by visiting the network card manufacturer's Web site will download and install latest driver update.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compatibility of Norton Internet Security and Vista Home Premium

  I have a new laptop with pre-installed A200 Vista and Norton Internet Security.
  I can't use the send/receive button to send Windows messages.
  I spent the time considerble in the forum MS to fix this problem without success. I am told that Norton is not compatible with Vista - even if Toshiba pakage this sooftware together.
  I deleted Norton and in fact the Windows Mail Send7Receive button start working. BUT then after about an hour it has stopped working again! I have re-installed Norton but the problem is still there! I can send E-mail of Mail when I exit and restart the station.

  Can help for this problem - can it be to the ISP? I use port 587 SSL

  Post edited by: tuition

  Hello

  I studied a little more on Norton and Vista compatibility issues and the Symantec Norton Internet Security is certainly compatible with Vista!

  Also, I found a document very useful Toshiba on this subject:
  Check this box:

  Windows Mail won't send or receive emails
  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  It seems that the update of the Software Desktop SMS Installer version will help to address this problem.

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update 00009C set 48-day habit do I need this, he saids when I check what is the internet 9 and vista

  my computer keeps wanting to date windows internet explorer 9 for windows vista saids its fails and it is important for the update.

  first what is it and why you think it does not refresh what I should do... its really mess up my internet explore, 9 48 code, he said ASSearch class hook is running in the browser of... .so I didn't what to do for that...

  Hi brendawise,

  Follow these steps to install Internet Explorer 9:

  Step 1:

  Download and install the system requirements for Internet Explorer 9 (IE9):

  Prerequisites to install Internet Explorer 9

  Step 2:

  Start your computer in a clean boot state.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Step 3:

   

  Download and install Internet Explorer 9 (IE9) from the link below:

  Internet Explorer 9

  Note: After installing IE9, check that you configure the computer to start as usual as mentioned in step 7 in the above article.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• It keeps telling me that the required updates are not installed... I have already installed SP2 and restarted my computer TWICE. Please help me!

  He continues to tell me that the required updates are not installed in order to download and run Internet Explorer 9... I have already installed SP2 and restarted my computer TWICE.  Please help me!

  I wouldn't bother downloading it, but I need for a course that is only compatible with IE9... He is constantly telling me that "Setup does not support this pack", even if the sine qua non pack has been installed!

  Hi stephprice,

  I suggest you follow the articles provided below and check if it helps.

  http://support.Microsoft.com/kb/910339/

  http://support.Microsoft.com/kb/971058

• I have been unintentionally disconnected and the computer restarted against my will!

  This has happened 3 times already in the last days. My computer says I will be disconnected Windows in one minute and I lose everything that I do and restart the computer. Does anyone have an idea why this is happening?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think