J6480 all-in-One: cover error open J6480

Similar Questions

• HP Officejet 6310 All in One – "cartridge error - remove and re-insert cartridge on the left.

  HP Officejet 6310 All in One "cartridge error - remove and reinsert cartridge on the left."

  Help!  With this error message, it is not allowing me to print at all.  I did the steps to clean the cartridge and carriage of the printer inside, twice with no result.  I turned off and unplugged the printer several times also. In addition, the cartridge that I just put is new.  Frustrated.  Thanks for any help you can send my way!

  Hello

  Looks like you did the correct steps to try to resolve the problem. If you did all the steps on the below link without resolving the issue, the hardware may be damaged.

  http://support.HP.com/us-en/document/c00831987

  After checking all steps have been completed, please call HP at 1-800-474-6836 for see what upgrade options are available for this model.

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• OfficeJet 6300 all-in-One, the error message which is print cartridge is open

  I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

  I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• 8710 HP all-in-one: fax error 346

  I get the error message 346 when sending faxes.  I have faxed to other numbers and he's been through.   Fax 888-HP FAXME and got a return fax.  I tried Dow to slow speed and it did not help.  What can I do else?  I can't work like this!

  Hi @dorcase,

  Welcome to the HP Forums!

  I noticed your post that you found the error fax 346 with your HP Officejet 8710 printer all-in-one. I'm happy to help you!

  This error means that the remote machine (person you send) responded to a fax on the local computer command because the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.

  New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.

  Source: Fax Error Codes and Solutions.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• All in one Photosmart C410 opens the folder of the Windows computer

  The computer folder to open and view the forces of HP Photosmart All in One 410 hard, removable storage devices, and network placement.  This happens on the start and restart.  That's like if I went to the menu start, access the computer icon and open it myself.  Measures: updated and uninstalled and reinstalled printer software.  Computer is Lenovo Z580, nine and examined by Lenovo for that matter.

  This problem only occurs when the printer is intalled.  Until the printer is intalled, the computer window does not open and display the contents of the folder.  After the uninstall window does not appear.  Any suggestions?

  Hello Psupprelief,

  I understand that you are having problems with your HP printer.

  In order to provide the best and most accurate response, please ask your question on our forum of the printer. You actually deposited to our laptop / desktop forum. Click on the link I have provided below and that will take you directly to the page of the printer forum. Choose the best category for your problem and then ask your question. You may need to create another profile before posting your question.

  HP printer forum page

  Thank you

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• HP Envy 4500 e-all-in-one: 0XB0595DD2 error Code

  Hello

  Can anyone help identify this error code and a possible resolution? I plugged my printer yesterday and the 0XB0595DD2 error message came immediately. I turned the printer on and off a few times, but it happens every time (the printer was not connected to my laptop). My printer is the: HP Envy 4500 e-all-in-one, model no SD-GOB-1301.

  Thank you.

  Reference:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!

   

• PSC 1610 all-in-one several error messages

  Hi and thank you for providing this service.  I have a PSC 1610 all-in-one, bought in August 2005 which is used with a Compaq Presario Windows XP (they were purchased as a Pack).  I started to receive error messages, more which start with 0 x, I have determined is an ink system failure.  Sometimes the messages sometimes say 'failed to initialize' or 'hw_interrupt '. At this point, I can use the power button on the 1610 and it restarts, sometimes producing a print.  Other times he repeats just with a different error message.

  I've uninstalled and reinstalled the software from the original CD, and also did the instructions on here regarding unplug USB cable, power unit, waiting, etc.  but unfortunately, I'm still having the same problems.

  I guess my questions are 1) is there anything else I can try to solve the problem and get back to happily print my genealgical research and/or 2) because the machine obviously lack of professional maintenance and it's so old, I would be better off just buying a new all-in-one?  (New Anthing I would buy would have both with this older Presario and a laptop HP 3 year running Windows Vista).

  HI -.

  I'm guessing you've already gone through the steps described in this document?  If so, on the only option I know is him having served.  In answer to your other question, with the price of all-in-one now, it is probably a better option to just buy a new one.  You can find the plug on current on this site printers.  You can do some comparisons between several printers to see what OSs are supported.  Wish I had better news.

  Hope that helps.

• After you have installed officejet 4110 all-in-one does not open the Director icon

  I have a printer HP Officejet 4110 all-in-one. It was not used in the month. Tried to print and no action. Printer test, self control and everything is OK. So I uninstalled the printer. Then reinstalled the printer. The Director icon is non-functional. I can't open the icon on the desktop, or I can open the Director by clicking on it in all programs. My system is Windows XP. If anyone has experienced this? If Yes, what is the fix for this problem. Thanks in advance.

  Thank you sincerely for your help to help me solve my problem first. Good job on the money. I now look forward to additional help on your part. Once again, thank you. Hitnmiss

• Photosmart C6380 all-in-One - printer error message question

  I have a HP Photosmart C6380 all-in-One printer.  It worked well for a number of years, but last year, whenever I want to print something, the orange light blinks and an error message is displayed in the window.  It is said: ' Please Oxc19a0035 turn printer off, then on.  If - before the printer print, I must turn off first and then on again.  It's more boring, to say the least.  Does anyone have a suggestion as to how I can solve this problem?  Thank you, Ms. Dahlia

  The troubleshooting steps described in this document may help to resolve the error.

• HP PSC 1210 all-in-one: could not open the HP Director icon to the desktop

  I installed the CD software for this fairly old printer on my laptop Windows 10 (64-bit). Everything seems to work fine except that I can't access the HP Director. I tried to check on the resources from HP site, but it does detect not all HP products on my laptop even if the printer is plugged in and on. Also, I searched for the car and the road status update on the site of HP tools. Even if I see my printer listed on the player page, it has no download button click next to my model. I was trying to see if the drive indeed download when I installed the software.  Again I don't know even though most everything works except for no access to the HP Director. I guess that the fundamental question is whether or not this now old enough (but still very good printer) can run on Windows 10. I used it before on XP. I'd appreciate any help with any of these issues. Thanks, Peggy

  Hello

  HP Director is not intended for Windows 10.

  The original CD was made several years earlier version 10 of Windows.

  Right click on the start icon and select programs and features, and then delete any software installed client the HP of your printer.

  Install the software by following the steps below:

  http://support.HP.com/us-en/product/HP-PSC-1200-all-in-one-printer-series/90763/model/90765/document/c01796879/

  Be aware that no full functionality is available for Windows 10 since it is an older model, scan and pritn base drivers are provided by the operating system itself.

  See "I have always used the HP and the HP Toolbox Solution Center. What I use now? "in the document for more information.

  Shlomi