Vista: Only Local No. INTERNET

Similar Questions

• Windows vista-internet connection is only local. Worked fine until Vista has been reloaded.

  Internet connection is only local. Worked fine until Vista has been reloaded.

  Choose the manufacturer of your computer in the list and get them from there.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• Internet connection is only Local (open wireless connection)

  Windows (VISTA HP SVP2) won't connect to my wireless - only local connection, but it is not a question HDWARE I am connected now on ubntu on a computer to dual boot. Why Windows can't see no internet?  It connects local only to a shared wireless hub
  

  tonight I resert the metwork adapter to automatically detect the IP4 and IP6 addresses.  This resolved immeidately SAT problem like ubuntu could connect, the modem does not need to be reset.  In connections in Vista on the Networking tab, you can select automatic detection.  MS help options that appear when you explain your diagnosis and repair

• My wireless connection is only allow me to connect locally to internet

  I have windows Vista on a computer and XP on the other. On the XP computer I am able to connect to my wireless router and internet without problem. On the Vista computer, it shows me as connected but only locally and does not allow me to connect to the internet. The wireless network is secure with WPA2. Before configuring security, I was able to connect to the internet on both computers. Any suggestions for settings that get around this problem? Thank you.

  Hi annev72,

  First of all, you can try to update the drivers for wireless card and check if it works.

  For more information, you can consult the following link to update the drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2: Turn off IPv6

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P300: switch from Internet access to local and internet

  Hello

  I Sat P300 and zet 3 usb allows you to connect to the internet.
  But for some unknown reason, the access pass to local access only and return to the local and internet.
  This can happen every 2 minutes or sometimes not at all.

  I checked the firewall and all settings for internet and everything as it should.
  Another thing that can help the modem works fine on old pc with xp.
  No problem at all.

  Any help would be great

  > I use the modem on another pc in the House he has xp and works fine no problem at all, only on the laptop using vista do this problem

  Have you asked (Zet) modem manufacturer if certain issues are known under Vista?
  To me, it looks like a Vista <->Zet

• Upgrade of Vista SP2-loss of internet connection

  I upgraded a VISTA 64 laptop computer to SP2 yesterday evening.  He seems to have retained my 802.11n network configuration, but since the upgrade will connect only locally, not to the internet via the wireless connection.  (It is not a problem with my network or modem, as another VISTA laptop wireless and other devices will continue to work properly.)  The ethernet connection works fine. I tried:

  • disable the firewall (Norton)
  • Diagnose and repair
  • confirmed connection to the router
  • newspapers of router checked-only MAC address is not blocked
  • updated the Intel 4965AGN driver to the latest version

  Any suggestions?  I am reluctant to completely recede SP2 unless absolutely necessary.

  lopburi3,

  This looks exactly like my question.  While I do not understand what has happened, I found a solution. Try this:

  • Log into your router and check what IP address is assigned to the computer that is not connecting.  If there is no assignment yet, give it a static address.
  • Go into your wireless connection TCP/IP properties and enter the manual configuration information: IP address assigned, the subnet mask and the router (default gateway) address.

  For me, allowed me to connect through Internet.
  
  Edit: as a first step, I had to re - enter the manual configuration after each reboot, and my router would not correctly identify the MAC address of my laptop (he appeared as 00:00:00:00:00:00).  After a couple more re - start last night, the computer retains the settings, so I could connect without having to re-enter the configuration, if the router is not yet MAC address list.

  I've then updated the firmware on my router last night.  (D-Link DIR-655)  Now, after another reboot, everything seems to work properly, with the portable duly identified in the router. There was clearly a problem with the network adapter and the router communicates correctly. brodyboy

• I only 'local only' connection, does anyone know a real solution that works?

  Hello

  My computer is a Dell XPS M1330 on Vista.
  Recently, I have noticed my wifi says identification or connected only local connection.
  Because this came I was not able to connect to any wireless network.
  I tried to connect directly via cable ethernet... still the same
  Even my 3 G Dongle says the same thing.
  The router works well because I use another computer on it, cables etc. all well tested okay with other computers.
  The computer worked fine on the router until the router is a D-Link router.
  I am pleased that the router is not the problem as all of the other computers and devices connect very well but I tried factory resetting is still no joy.
  I tried drvers off installation and reinstallation on the computer, but that networking does not work on wired, wireless or 3 g dongle I suspect something went wrong somewhere with the computer.
  Can someone please suggest a solution.
  Concerning
  Colin

  Hello

  Method 1:

  I suggest you to follow the links and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  See also:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

• Only local access while using the USB modem

  Hi, I have a laptop dell inspiron with Vista home premium preinstalled in it. For about 3 years I use GPRS (internet) with modem USB on it without problem. It was working fine but application stopped working 15 days before. I tired every thing from different forums but the only "Local access" message is fix... now, after trying a lot of different things I get of the internet world for 5 minutes but it goes to new local only access. But within 5 minutes no Web site is too load. I have no problem with my connection to the LAN and wireless. They both work fine(I hv tested). Its only for my nokia usb modem. I HAV tried to use GPRS to different operators, but it is givin local only access for all, and when consulted internet in all mobile phones are workign fine.  I also tried to use microsoft fix but it gave an error file not found and ignored den and ran some checks of registrey and claimed restart. But no change in connectivity.
  Help, please.

  Hello

  ·          Update you the network card with the latest drivers?

  Method 1:

  I suggest that you disable Antivirus software and firewall temporarily on your computer and check if you are able to connect.

  Note: Please make sure that you enable the antivirus software and firewalls after the test to keep your computer protected.

  Method 2:

  You can try the manual steps suggested in the following article:

  http://support.Microsoft.com/kb/928233

  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

• Windows Vista cannot access the internet, the link speed and Duplex negotiation seems to be the problem

  I have a desktop running Windows Vista Home basic and I can't connect to the internet through a local network, which is connected through a router (Belkin). Adapter type is Internet: Intel 825562V-210/100

  After consultations with the support of technichal society of router and my PC vendor, it seems that there is aproblem with negotiating the link speed. Here are some symptoms:

  I can access the internet if I connect the cable directly to the modem;

  Connected through the router, I can sometimes connecting to the internet if Imaually change settings of connection speed (10 / 100 Mbps, half/full duplex)

  All other PC connected to the network, using Win Vista and throuhg connected to the same router, have access to the network;

  If I connect my network cable to another PC, it will have access to the internet;

  The status of my PC seems to be 'connected' on the site of implementation of routers. The State of my connection is sometimes "Local only" sometimes "Local and Internet", but in fat, there is no internet access.

  I tried the following:

  Trouobleshooting under the direction of the technical support of the router and PC vendor.

  Update the operating system to restore to an earlier date, to restore to the factory settings; Reformatting my PC 2 times, (first internet worked for a few hours only); update the OS (by connecting directly to the modem); Turning off Win Defender, removing software antivirus. Reset LAN connection...

  Any suggestion please?

  New router solved the problem.

  Thanks a lot, especially Jack :-).

  P.J.

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• See primary e-mail profile (account) is not at the top of the records, only local folders pane, unable to auto receive.

  TB V - 24.4.0, Win XP32, fired from OE to the CT today on the friends system is about to run Win 7 64. Original e-mail account is lequipetv.fr and it was able to import all the mail and setting of address book correctly in TB. However, at the top of the pane of the records of the CT, his main account is not listed, only local files. When I sent a test email to his account, he has not received so I tried to click on the "Get Mail" button above the pane folder without success. Next to the right of the "Get Mail" button is a drop down and when I open, I see 'download all new messages at the top and his main account (complete address) below. Now when I click on his email in this button, his hand began to populate fine. Looks like the main profile (account) is not the default value and after 3 hours of reading tips, support, help files, etc... at my wits end trying to get it setup correctly if I can back it up with Mozbackup and restoration on the new system. I would like to include a screen shot, but could not find an option to do so at the moment, another question? Thanks in advance.

  Thanks Matt, you provided now settings TB download new default email opening of TB. One last question, I don't like having the pane complete message for security reasons, but when I go into this display/page/Message pane and uncheck it on every screen, every time that I reopen it TB, it gives the message pane on. Any way to save it permanently? Thanks again for your help!

• This version is for windows vista only

  The network drivers provided with the computer on cd and on the partition do not work on windows 7. Page lenovo.com for ideacentre k410 drivers I found this:
  Realtek LAN Driver
  h1100043.exe
  5.76 MB Windows 7 32 bit,
  Windows 7 64 bit 7.48.0823.2011 March 31, 2012

  Install on windows 7, I get: this version is for windows vista only... and the installation fails.

  If I can't get this resolved the computer has no value for me, so I'll be back and never buy Lenovo again.

  Hello

  You can try these Drivers

  Be sure to do a full reboot after each installation.

  Realtek RTL8188CE WLAN driver
  h4wc02ww.exe
  11.62 MB

  LAN (Realtek RTL8111F)
  h1100196.exe
  5.82 MB

  Renesas Electronics USB 3.0 Host Controller Driver
  ID5CAR12WW5.exe
  7.11 MB

  Let me know your results

  Thank you

  Solid Cruver

• Active Directory users are authenticated web-auth (web-auth has only LOCAL users)

  Hello

  I have a model WLC 4404 with software version 4.2.205.0.
  I have 2 SSID: Wireless and invited
  -Wireless: using [WPA + WPA2] [Auth (802. 1 X)]
  -Guests: use Web-Auth

  In the guests of SSID (WLAN-> Edit > AAA security servers I have not all enable server - option there is NOT and not activated-).

  I do not understand that the request for authentication is attempted ONLY locally to the WLC but not in the ACS (ACS has been configured in security-> RADIUS-> authentication).

  When a user authentication Web Page inserts user and password of SSID wireless (users who need to be authenticated in Active Directory via ACS) it is authenticated.

  I need to change this behavior.

  There are a few options depending on what you are using the code.

  6.0 and higher, there is an option in the WLAN directly, select only LOCAL.

  5.2 below, under Radius authentication servers, uncheck the box for the user of the network.  This check box allows the WLC to use the servers in the world, which means that if it is not precisely defined under the WLAN, it can / will still be used