Vista Photosmart c5180 driver problem

Similar Questions

• Photosmart C5180 driver for Windows 7 RC

  Are there drivers (beta or not) available for this printer all-in-One on Windows 7? The Vista 64-bit driver should work on Windows 7 as well, but the installation program stops due to OS version control.

  Although the drivers for Windows 7 have not been officially released, you could try running the installer in Vista compatibility mode. who can help.

• Tecra S1: Cannot install Windows Vista - ACPI.sys driver problem

  Get the blue screen when you try to install Vista Ultimate edition on my Tecra S1--> STOP... ACPI.sys incompatibility.

  Someone knows how to fix this problem and where can I find an update for this driver?
  I already have the latest version of the BIOS (2.50) and don't see any driver update on the Toshiba site...

  Someone at - it already correctly installed Vista on this type of laptop?

  Hello, Johnny

  Robin is quite right. Tecra S1 is a portable older and certainly not Vista supported. As you know just for laptop with Vista capable sticker are supported Vista and Toshiba offer a BIOS update to make it Vista ready.

  I recommend you to use Windows XP Home as before. Optimize Windows XP Home edition preinstalled and you will have very good performance on this laptop more old.

  Bye and good luck!

• Photosmart D110a driver problems

  Hi all

  I have a HP Photosmart D110a. I came across some printing problems (always said it was looking for printer, never found), but I had not being updated or changed something, it just happen out of the blue.

  I deleted my drivers, thinking I could easily find them online. I don't have the CD. I am running OSX Mavericks. My printer says it is connected to my network wireless, but when I try to add the printer in System--> Printers Scanners preferences &--> + it does not detect. There seems to be no download of driver software available on the HP site, that instructions on how to download updates from the update on Macs, which is not good because it is said that there is no available.

  Does anyone have any suggestions? Desperate here.

  Hi thuffman,

  I've worked with a lot of other help get the HP printers installation and in collaboration with the Mavericks. You are right, for the moment there is no full software features and driver for the D110a, but with a doubt be able to add the printer.

  You said when you try to add the printer "it does not detect", I just want to clarify that. The computer does not detect the printer or the computer does not detect the driver?

  As I understand it, I suspect that the computer does not see the printer at all which means that the computer cannot be on the right side of the network. You said that you have confirmed that the printer is on the correct network, have you checked the computer network? If the computer is located on the right of the network may try to turn off the router, the device from Apple and HP printer.

  Follow these steps to turn off the router, Apple and the printer device.

• With HP Photosmart 7525 driver problems

  Hello, I had problems with my printer. All first whenever I need to print something it gives me an error saying: failed to connect to the printer. Even with a sweep. I have to restart my router to make it work. I have however found no difficulty analysis. I ran doctor scan and it came to pass in the section problems with sadki Scan and driver to check. Please say suggestions.

  Hi @TheFatCrafter ,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your printer HP Photosmart 7525 and connection problems.  To get help, I'll need to know more information:
  Is that the printer is connected wireless or Ethernet to the router?

  If the power cable is connected to a surge protector, or directly to a wall outlet. Emits when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  In the meantime, I suggest trying the following

  Uninstalling the printer software.

  Re-install using the HP printer install wizard for Windows.

  I hope this helps.

  Thank you.

• Stuck in Safe Mode - Vista - viruses? Driver problem? Help, please

  I'm operating Vista Home Premium and only the system starts in Mode safe.  Several vertical lines in a model of 5 show on the screen as it tries to start. He is stuck in a loop of repair of unsuccessul attempts but I can't us F8 to go into Safe Mode, no problem.

  Normal system repair did not work. System Restore to a watch in which the system was working did not work (went back 2 weeks).  I thought it might be a video driver error, but new updates of drivers did not fix the problem still could be the problem?  It will not Norton scan (although my anti virus has expired four days before what is happening). I uncheck all startup items and confirmed that in Normal Mode with the system configuration. None of this has worked.

  I bought an external hard drive to transfer all my data on that I agree with setting back to factory settings, but it will not recognize the new external drive in safe mode.   -Why is this?

  Any help on these two issues would be much appreciated!  Pulling the last hair on my head!

  Hi ColtsBlue,

  ·         Did you of recent changes on the computer that could have caused this start happening?

  ·         Are you able to scan the machine with something other than Norton?

  I suggest you try the methods below and check if it helps.

  Method 1: If you have the disks for Windows Vista try a startup repair and verification.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2: This can happen if the video card drivers do not work or is corrupted so uninstalling and reinstalling might solve the problem several times so try uninstall the drivers from Device Manager. Follow the steps below:

  1. Click Start, in the search box type Device Manager and press to enter.

  2. Device Manager window opens, expand sound, video and game controllers.

  3. double click and go to the tab drivers.

  4. click on the tab to uninstall to uninstall.

  5 restart the system, it will reinstall the drivers again.

  Method 3: You can uninstall Norton and install Microsoft Security Essentials of Microsoft and check if it works very well.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Scan driver for HP Photosmart C5180 all-in-One

  I recently replaced my hard drive and while my printer (HP Photosmart C5180 All-In-One) works fine, I have no more scanning software. When I insert the installation disk I get a message saying that the software is not compatible with Vista (Home Premium). All I can find on the site of HP's software driver. This disc was used to work on this computer. The only difference I can think is that Vista has been updated. Where can I find analytical software that works on my Vista OS update?

  Try this driver for Vista

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47461-2&cc=us&DLC=en&LC=en&OS=2100&product=1153481&sw_lang=

• HP Photosmart C4680: HP Photosmart C4680 driver for Windows Vista 32-bit

  I can't find the HP Photosmart 4680 for Windows Vista 32-bit driver. The HP Web site has only the driver for Windows 7 and newer. I tried to install this driver, and obviously it did not work. Can anyone help? Thanks in advance.

  HI @rtraveler,

  I understand that you need drivers for Windows Vista. I'd love to help you.

  I have provided the link to the Windows Vista drivers.

  All-in-one HP Photosmart C4600 series printer full feature software and driver.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Hard drive problems Windows Vista Ultimate Edition

  Well guys, that it left me speechless.  I recently inherited a laptop from a friend who is fairly new and in good condition.  The laptop, a Toshiba Techra A9, installed Windows Vista Ultimate.  The problem that I seem to have with the laptop is that it will start Windows in normal mode but gets up to a certain point and then hangs up.  I can hear the drive trying to be rolled up and continues to make a rattling noise, similar to a folder that jumps.  The funny thing is that I can turn the machine off and restart in SafeMode w / networking with no problems.  I tried a hard drive cool to think the problem could be a faulty drive, however, the new drive does the same thing.  I installed Vista via the Toshiba Recovery CD, and from the beginning for the first time Windows has frozen, the new hard drive making the same noise as the old.  Anyone out there have any ideas why this is happening?  Install a new hard drive and having the same problem son believe me that it is related Windows or I'll have another hardware problem elsewhere on the machine.  Thank you!!

  Try to check the drivers on the computer to the hard drive. If you can, go to the MMC Console in computer management, go to the Device Manager, and then in the console tree, you should see a line of 'hard drives. Down there, you should be able to see your hard drive. Right-click and click Properties, then go to the drivers of the popup window and note the driver version number. Check on the Toshiba site and see if there are updates to the hard disk driver. If there is, then install it. In addition, you can start safe mode and run your antivirus, assuming that he himself has not been compromised. It seems to be a software problem or driver since you say that you can start safe mode. Timothy

• Driver problem OS Vista EDITION Home Premium

  Some applications such as ADOBE, HP, touchpad and drivers etc do not reach all the updates.  Tried to download Windows Vista Driver and got Error 1606 could not access network location %alluserprofile%/start menu/programs /. Someone recommended that everything should be deleted in the hard drive and a recovery disk to reload Vista to solve the driver problem.  Sounds extreme, but I'm not computer savy.  Any suggestions are appreciated.  Thank you.

  Hello

  I suggest you to see the link below and follow the steps and let us know if it works or not.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/b71c582d-3687-497d-8525-ddb459fa8c6f

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problem cartridge HP Photosmart C5180

  Recently, I tried to change the cartridges for a printer HP Photosmart C5180 and bought two new sets, so I got some for the future. The representative of HP in the store told me that 02xl vivera HP inks would work as well as 363 regular cartridges supplied with the printer and that they would be more beneficial that they hold more than 50% ink. They also fit perfectly into the printer.

  When I put in the error message the front of the printer says: "the ink cartridges are not intended for use with this printer. I can't bring back them to the shop as I bought a HP store in Las Vegas and I live in England. Please, please help if you can because I do not know that they would work with change of parameter or something.

  Kind regards

  Andy

  Sorry, the 02 cartrdiges cannot be implemented in the C5180 which is regionalized for England.  There are certain circumstances where HP can change the settings of the regionalization of a printer, but this case does not match this model.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• problems installing software hp photosmart c5180

  Hello my c5180 and my 64-bit windows 7 will not match

  It wil not install more software hp for printing / scan / copy.

  who can give an idea, s/help

  its starts with fr installation a few minutes later, gone is the installation screen.

  and nothing happens?

  I tried:

  AIO_CDA_Net_Full_Win_WW_130_140

  Thank you

  Hello jvdl,

  Welcome to the Forums!

  I saw your post on the questions you have install your Photosmart C5180 on your Windows 7 computer. I understand the installation will start, and then stop and disappear.

  I would suggest after each step from the document below to hopefully help you to install the software.

  On the Software Installation progress bar stops or crashes

  I hope this helps you!

  Good luck

• How to fix color on skin tones in a printer Photosmart c5180 on Windows 7?

  Good afternoon

  I use some time a Photosmart C5180 printer to print on A4 sheets, capture some of my Nikon D90 photos.

  If the prints generally show a reasonable quality, I was quite wrong with color moving in much darker tones of skin that appear more pink and against nature.

  Does anyone have the same experience or know how to solve the problem?

  Thank you

  It does not help.  As the calibration option is not there, it may be because you have the version of Solution Center does not offer this option.  If I remember correctly, it was deleted in the later version because it has been incorporated in the own options or alignment.  I think that the problem is in the print or color management driver in the computer.  The only option to tailor color management is in the printer printing preferences.

  1. Click on the start menu.
  2. Click devices and printers.
  3. Right click on printing preferences.
  4. Click the Advanced tab.
  5. Change the setting of the HP real life technology.  If it is check, uncheck and visa versa.
  6. Try to print the photo again.

  If changing the color management setting does not resolve the problem, then follow the document below to assign the printer to use a different printer driver.  I recommend the 990c Deskjet.

  http://support.HP.com/us-en/document/c01796821

  Let me know what happens.

• HP Photosmart C5180 - Windows 7 64 bit - network - device detected but FAIL to install.

  Hello

  I have a Photosmart C5180, connected with an ethernet (not usb) cable.

  It's great to work with all the computers in the House (vista and xp).

  But my new computer, a 64-bit windows operating system 7, impossible to install the drivers:

  The drivers are now installed, but the step 'add a device' does not work correctly.

  After the analysis of network, the printer is displayed:

  

  Then I click Next, to "network analysis":

  

  OK, next step is "installation." Before the picture, it says 'detected printer"(french).

  

  And a few seconds after it fails:

  

  Grrrr wtf?

  Thanks for the help!

  I had problems to install the HP software. When I installed the full package I get pop ups and error messages. So I did a complete reinstall (I have now if he really had to do I had other issues). After that I just installed the drivers and no extras and it works very well. I'm also hooked using the ethernet connection. A point even before the reinstall if I come you drivers and no additional software. I can still scan using Windows Fax and Scan. I probably will not add extra software until there is another version.

• Connection to the printer driver problem

  I am trying to connect to the printer (hp business inkjet1100) that is connected to a computer running xp (sp3 pro) to my computer laptop under vista (home prem x 64). That just seems confused reading this way: (printer) >>>(xp/desktop)<(vista aptop).="" i="" already="" have="" a="" network="" set="" up="" and="" can="" share="" file="" with="" no="" problems,="" so="" i="" thought="" it'd="" be="" easy="" to="" connect="" to="" this="" printer.="" i="" was="">

  I try to connect to the printer by going to control panel > printers > add printer > network printer > the printer name after what in fact share on the xp computer (the name displayed on the computer to vista so there no problem). While vista has attempted to connect to the printer (bless his heart), but had a problem (no surprise), he couldn't find a driver and asked me to manually find the .inf file. No problem, just download the driver for the hp site, right? Evil.

  Apparently there is no driver for my printer for windows vista, however there is a solution. You can use the drivers for the printer series 1000 and basic functions should work (I hope it includes printing). The problem is that workaround tells me to manually configure the printer (port, pilot, etc.), then reconnect the printer to the computer (the problem is the printer is not connected to the computer in the first place).

  Now I consider myself fairly well with the computer and fix most of the problems without help (and unfortunatlly end up helping a lot of family with their problems), but it's just annoying. I decided that it's time to call in the experts (from India).

  I choose the live chat, because it always seems faster and I haven't had one that had playing music while I'm waiting (some may consider something positive). The problem is that I need to find my serial number and product number. I copy down the 2 easily labled numbers, but that is not good combonation. So, I searched for 'find the product number', and I get a page just like what I get (finally some lucky). After clicking on printers, I get to a page called "find the name of your product." At this point, I give up on the hp site and just write down every number on the back of the printer. Finally the stars aligned and I can start to chat with someone. A couple of auto messages pop up and then he asked me to confirm the information, I'm just entered (if she was wrong how do I live chat?), then continues to inform me that my warranty has expired and it will be $ 25 for support. I ask him if there is any other type of support, and he says that the best he can do (probono) is to give me a link to a Web page on the site of hp (I've been there believe it or not), I thank him for his time and move. I hope that the expired warranty matter here (but if it ignores just this part that was a total lie just to see if you would really help a guy without a guarantee (to test if you were really good people or just simply...))

  Thanks in advance for your time

  Additional details:

  Laptop: AMD, Vista home prem 64 bit

  Office: Intel, XP Pro 32-bit (x 86) Home

  The following has worked for me, allowing me to manually select the driver

  Another method 1. 1. click on the Windows icon > Search > printers Type and press ENTER. 2. click on 'add printer '. 3. click on "add a local printer. 4. click on ' create a new port:'. 5. do not change the "port Type:'." By default, it is selected as "Local Port". Let it remain the same. 6. click on "Next".

  7. in the small ' Port name: "window, type the following command under" enter a port name:'

  NOTE: Names must be exactly the same. They are case-sensitive.

   

  \\computer name\printer name

  For example: If the computer name is 'John' and the printer name is "HPprinter", you must type the exact name with all characters, including spaces.

  This is why in this case it would be the following:

  \\John\HPprinter

  8. click on OK.  9. click Next and complete the wizard. (It will now install the printer and driver) I used the driver of the 7400 series for my 7550 but it works.10. Try to print a Windows test page and check the functionality of the printer. 1 click on the start icon on your control Desktop.2.Select Panel.3.Double, click on the printer icon.4.Select and right click on the printer HP Photosmart 7550 series icon.5.Click on properties.

  6. in the Properties window, click on Print Test Page tab it starts printing a Page of Test Windows

  2