Vista Ultimate start up... states missing .sys file...

Similar Questions

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• On the computer, it does not load XP but goes to the XP start and says: NVRD32.sys file not found

  On start-up the computer, it does not load XP but goes to starting XP, and says NVRD32.sys file not found. I have to go up to xp home line manually and it load. How to fix the problem, so he starts xp automatically without entering start xp
  Thank you

  Posing for the PC model, you show that you do not know the answer, it was a software problem, but you're right, it's a Dell.
  In any case, I found the answer elsewhere, must with the boot.ini file on XP

• Start of the missing OS file of repair failure

  I ran Startup Repair to see if it would fix the many problems I asked for help in other instances of answers and got nothing.
  My OS is Windows Vista SP 2 w / recovery Partition. I made a set of recovery disks, but one of the disks is unusable and that they are not available at HP.
  Relocation of service paks would help or do I have to start Recovery (I really don't want to do witch) hope it works?

  Here is the result:

  PEN 01 unknown
  PS 02 6.6000.16386.0.0.0.0
  PS 03 0
  PS 04 65537
  PS 05 unknown
  PS 06 No. OS installed
  PS 07 0
  PS 08 1
  PS 09 difficulty Patition Table
  PS 10 1168
  OS V 6.0.6000.2.0.0.256.1
  Local ID 1033

  Root cause found

  No OS files found on disk
  Repair action: Partition Table repair
  Result: Failure, error Code 0 x 490
  Time taken = MS 3947

  One thing I forgot to mention, the last 2 times I tried to run Chkdsk it failed, it just stopped running.

  The second time was after I ran the ISO recovery disk.
  I run Disk Clean up, I run fairly often anyway, as well as the Defrag.
  Since I was the recovery Partition, I'm not sure to play with it.
  I have a portable hard drive for back up. at the end of the day, no matter who walks through your life, it is important that remains. J. R.

• Vista Ultimate unable to boot, file missing or corrupt eezjc.sys...

  This has happened after that I had some kind of accident. Initially, I tried to restore to a system restore point that has led to the problem that I have now. I don't have an installation disc, because the files are on a partition on the hard drive and have also tried to repair without success to start.

  Someone at - it an idea how I can fix this problem that I can not even past the start screen

  Hello

  If you need to save data to a drive non-Boot you can put the drive in another computer
  or in an external USB enclosure - either allows you to copy the data to a removable media. NOTE
  There are two dangers that these 1. The system in which you put the drive could be infected
  and 2. malicious software could be transferred to the new facility.

  So it would be best to do the above to remove the malware, and those that could eventually allow the computer
  to start of so it can be repaired.

  / Settings (BIOS/CMOS) often F2 as you start then look at screen - set the boot order to
  CD/DVD first and start with these to run audits of malware and the removals. Be sure to set the boot
  order return when finished.

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  System Rescue CD
  http://SysRescCd.org/Main_Page

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ------------------------------------------------------------------------------

  No saving necessary data and re-installing Windows Vista might be the best option.
  (I ran the malware checks first to help eliminate the chances that he would be transferred
  with backups).

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

• Startup Repair tool - windows cannot repair this computer automatically sqpzkzio.sys file is missing or damaged

  Vista was working fine on my Acer laptop - then just started the statement he tried to fix it but couldn't.

  I don't have an installation disc that Vista has been pre-loaded - tried to repair a Vista disk from another computer without success - to where/how can I fix this missing or corrupted sys file?

  Have you tried any repairs of bcd as mentioned in other posts without result

  wroteIs "ajdunn" it is possible to get this file somewhere and
  replace the existing one?
   
  Just delete it! -It is 99.99999%certain to be malicious
   
  --
  Noel Paton
  CrashFixPC
   
  Nil Carborundum Illegitemi
  www.crashfixpc.co.UK
   
   

• How to start VDS in Windows Vista Ultimate 64-bit?

  I have a problem, and it's been a while and still not solved...

  I have Windows Vista Ultimate 64-bit right now and I want to upgrade to Windows 7, but installation is NOT going through perhaps because of the virtual disk service.

  How to START the virtual disk service? Everytime I try through services, I get an error 3: the system cannot find the path specified.

  Please tell me HOW to start the virtual disk service. and please do NOT move this thread on the forum windows 7, I posted in the front Vista section and moved to the region of Win 7, where my problem has not been resolved. Please leave it in this section. Thank you.

  Ok. The file is in the right place. The registry is missing the path to
  the file. Wonder how that happens - sigh?
   
  Type Regedit in the search box of the start menu.
   
  Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\vds
   
  Right-click on an empty area in the right pane - choose new - extensible
  String value. Name ImagePath (F2 key renames it). Double-click
  ImagePath and assign
  %SystemRoot%\System32\vds.exe
   
  Now you can start the service?
  --
  ..
  --
  "Jouho" wrote in message news: b35bf627-5 c-4 c 17 72-91df-57439b0880bf...
  > Thanks for the reply!
  >
  > Here are 2 pictures of 2 orders that I put in the command prompt, which
  > that means?
  >
  > http://oi54.tinypic.com/330chll.jpg
  >
  > http://oi55.tinypic.com/x0ohhi.jpg
  >
  >
  >
  > Thank you
  >
   
   

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.

• HP Pavilion Desktop Window Vista ultimate 64-bit. Failed to start. Can not put in safe mode, cannot restore the system.

  HP vista ultimate: commissioning can not repair computer: Signature of the problem, Startup Repair v2; ongoing state: the disc problem signing 01:system; 02: 6.0.6001.18000.6.0.6001.18000 04:196611 03:05 6: registry corrupted 06: no causes 07:0 08:2 09:WrpRepair cause of root of ID:1033 local 10:0 found: c0000218 Bugcheck. papameters = 0x9046cc98, 0 x 0 0 x 0 0 x 0 Action required: System Restore. Result: Failure error code: 0 x 490 of this office that I bought as recently used pc, I have No Boot up, recovery disks. Please can someone advise? »

  I think that some malware has been inadvertently downloaded and deleted the entry of game and ran anti-virus and found no malicious software, again, I think that this has caused the problem I have now.

  Any advice appreciated,

  KatyK

  Hello

  Yes, you can create a repair disk.
  a. Click Start.
  b. click on all programs.
  c. click on Maintenance.
  d. click on create a system repair disc.
  e. Insert a DVD into the drive, and then tap on create disc.

• the spldr.sys file is missing!

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Get a message at startup which spldr.sys failed to load.  Have looked in System32, but it cannot see here - could it have been deleted and if so, where can I get another copy to replace it?

  The spldr.sys should be there.

  Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  He is able to find and repair broken/missing files? If this is not the case, replace the driver with the file of your DVD [3].

  Best regards
  André

  [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  [2] http://support.microsoft.com/kb/929833
  [3] http://blog.nirsoft.net/2009/09/17/how-to-extract-missing-system-files-from-the-dvd-of-windows-7vista/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Upgraded to Vista Ultimate to XP Home now get dll missing ha1

  I upgraded from XP Home to Vista Ultimate. I did all the updates for XP Home before to move to Windows Vista Ultimate Edition and then did all the updates for Vista, now when I try to boot my system in place, its registrant I'm missing or damaged dll ha1 file. Any help would be greatly appreciated.

  Found a simple solution that works. Here is the link http://www.vistax64.com/tutorials/68767-clean-install-upgrade-vista.html

• Vista cannot start because of accidentally deleted system files

  Hello

  my laptop was working very well until some files were accidentally deleted and now Vista cannot start.
  There is a message saying that I need to contact the system administrator or the manufacturer of the pc.

  Is there anything you could recommend?
  I would appreciate if you could help me find a way to record all of the information contained in hard drives.

  see you soon

  If you are not able to boot up the laptop and refuse it to Vista to start then take recovery in hand, insert it and start on this CD from Toshiba.

  Then the cell phone should boot from the recovery CD and reinstall the whole OS again.
  This should help, but the HARD drive will be formatted.

• Age of Empires 3 does not start on a vista machine, get this error "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error."

  I'm trying to play age of Empires 3 on my computer running windows vista Home premium and the program does not start. I get the error message: "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error." I tried many suggestions from Microsoft (resettlement program, reinstall in safe mode, update & reinstall the drivers for my video card, the compatibility issues with vista, updating and reinstalling directx 9.0 c, install vista service packs 1 & 2) but nothing has worked so far. I was able to play the game on the same computer with windows xp installed (it's a different hard drive that is not in the computer, and everything is the same) and it worked fine. My computer is old enough, but like I said the game worked before installing vista. ASUS A7N8x deluxe, AMD Athlon xp 3200 +, ATI radeon 9600, 2 GB OCZ ram that all suggestions are welcome. Thank you.

  Hi Raygun55,

  Welcome to Microsoft Vista answers Forum!

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  I suggest that you copy the file manually by following the steps and check if you are able to play the game without any problems:

  Manually copy the file

  To do this on a computer that is running Windows Vista, follow these steps:

  1 insert the disc 1 CD for one of the following games into the player from the computer:

  o Age of Empires III

  o Fable: The Lost Chapters

  o Zoo Tycoon 2

  o Rise of Nations: Rise of Legends

  2. click on start to reduce this includes this image and then click Documents.

  3. Locate, and then click computer.

  4. search and then click on the CD drive.

  5. Locate and then click the following folder:

  CD player :\ DirectX9

  Note In this folder path, the CD player represents the drive letter of the CD drive.

  6 double-click on Apr2005_d3dx9_25_x86.cab, right click on d3dx9_25.dlland then click copy.

  In Rise of Nations: Rise of Legends, double click Aug2005_d3dx9_27_x64.cab right-click d3dx9_27.dlland then click copy.

  Note Use the Apr2005_d3dx9_25_x64.cab file for the x 64 version of the Windows operating system.

  7. find one or more of the following folders, depending on the games that are installed on the computer:

  By car : \Program Files\Microsoft: Age of Empires III

  By car : \Program Files\Microsoft Games\Fable - The Lost Chapters

  By car : \Program Files\Microsoft Games\Zoo Tycoon 2

  By car : \Program Files\Microsoft Games\Rise of legends

  Note In these folder paths, drive represents the letter of the drive where the game is installed.

  8. right click on the folder of the game which is the part that is installed on the computer, and then click Paste.

  Note If you have installed more than one game on the computer, repeat steps 5 and 6 for the other games.

  You can check the link for more information: error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL was not found": http://support.microsoft.com/kb/910813

  Alternatively, you can try to install the game in XP compatibility mode and check if you are able to play or not.

  Right-click on the game > click Properties > click on the Compatibility tab > select for XP compatibility mode > click OK.

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing dll file USBSTOR.sys ksuser.dll

  Dll file missing original title-

  I'm missing dll file ksuser.dll USBSTOR.sys can someone help me get it back?  I am running WIN XP Media Center 2002 SP3 and IE 8.0. I think I deleted it by accident when I uninstalled Tune Up Utilities.  Because of this missing file, I can't apply. Thank you.

  Fingers crossed X X

• Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

  Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

  Hello

  If we can start safe mode?

  If so, we can perform Clean Boot Troubleshooting:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  If this isn't the case, then we might need a Windows XP CD in order to move forward.

  Let us know.

  Best regards

  Matthew_Ha