VISTA WILL GET NA UREN KÜREN, PROGRAMMAAS WILLEN NIET OPSTARTEN GIVE ALLEEN EEN FOUTMELDING EN HET IS OOK NIET MEER OP EEN NIEUWE EMAIL TE MAKEN OF TE REPLY
ALLEEN OPNIEUW OPSTARTEN WORKS ALS KÜREN VERSCHIJNEN IN UITZETTEN IN WEER AAN.
Sorry, but speak us only English in these Forums.
Please go to: http://support.microsoft.com/common/international.aspx and choose the region appropriate for support in your language.
Good luck! Lorien - a - MCSE/MCSA/network + / A +.
Tags: Windows
Similar Questions
-
I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
Is this a common problem?
Is there any solution for this?You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
The correct procedure is:-
Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
There is no problem, with the exception of this incompetence of users.
Thank you for your time and assistance. -
Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.
Hello
This article describes how to use the system restore feature to log on Windows 7 or Windows Vista when you lose access to an account.
http://support.Microsoft.com/kb/940765
If the above does not work
I'm sorry, but we cannot help with forgotten passwords
It is a policy of microsoft in these forums
you need to reinstall vista
-
Can't reinstall Vista. Because Vista will not get to the Setup screen.
Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).
Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD. So, how can I reinstall Vista?
I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen
Any info appreciated
Thank you
Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista
-
Can I install lightroom 5 on Windows vista home 32 bits andhow many computers can I install it on? I'm afraid that if my computer rejects lightroom I will get a second chance.
Bunkieboy,
Lightroom 4 and later will not install or run on the 32-bit editions and 64-bit of Windows XP Edition family or professional
Lightroom 5 et seq. will not install or run on 32-bit editions of Windows 7, Windows 8, 8.1 for Windows and Mac OS 10.6.x
Lightroom CC will not install or run on Mac OS 10.7.x
Please see system requirements for Lightroom for more information.
You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it one at a time. Lightroom is the exception because it is a cross-platform product, so it can be installed on the pc and mac platforms.
Guinot
-
Vista will not be updated. I get the error 80072EFD. I added the Update Web sites for my trusted under internet options sites, off the wall of fire, DLed and used MicrosoftFixit50202.msi. Yet I still get the same error. I do not use any other firewall. Any help out there?
moose149
Only one 1 antivirus/security suite applications should be installed & loading at startup at any given time. Since you do not know what free trial could come preinstalled on the computer, I have to have executed the two removal tools in the steps below.
1. Uninstall Avanquest System Suite 10 & reboot. [1]
2. make sure that the Windows Firewall is enabled!
3. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
3 b. download tool McAfee Consumer Product Removal, save it to your desktop:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
4. close all open applications (that is, anything with an icon on the taskbar).
5. click right on the file you saved in # 3 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.
6. click right on the file you saved in # 3 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.
7. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the difficulty in DEFAULT then AGGRESSIVE modes. [2]
8 restart once again & test.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] I'll tell you right now that Avanquest applications are notorious for not properly uninstall. Unfortunately, there is not a removal tool that I know.[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Pre-release version of vista will expire...
Pre-release version of Windows vista will expire in 0 hours message comes back on my computer. I googled and saw the re - install SP2 "Difficulty" I tried to do... My computer says that it is 'Service pack 2, v.286,' I went to the Microsoft Download site and downloaded the right version of SP2, which I tried to run but I got the "you must delete all versions SP2 previuosly installed on your computer. I tried to uninstall it using the element programs and features in Control Panel, but there was no update SP2 listed... so then I try to uninstall it by using the system restore, which gives you two options A) If you have the Vista CD, DVD or B) If you do not have the Vista CD/DVD; (which I did not) I follow the directions until he tells me to "choose a restore point" and I, according to the indications, am supposed to select the service pack of Windows Vista installation dates but it lists only updates since 10/03/2010, and all of them are just listed as windows updates not Windows Vista Service Pack... Can anyone help? I bought this Acer laptop in July 2008 and he had all the software installed on it. It did not come with discs or anything. I have spent a whole day trying everything and didn't get anywhere! Thanks in advance!
Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.
If you were not able to validate, follow these steps:
1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062
-Online Windows XP: double-click the executable file to run the tool.
-Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.
2. after running the tool, click the Windows tab, and then click copy (to the Clipboard).
NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.
3 start a new thread in the appropriate forum of Microsoft Genuine Advantage and paste the WGA tool results in a detailed post: http://social.microsoft.com/Forums/en-US/genuinevista/threads
4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
When you do the automatic updates of Windows Vista, I get the code below.
'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure
- What should I do to fix this?
- And what does this update actually?
Thanks for any help provided.
scrubie,
If you go to programs and features, and then on the left side you should see a link for "Daily display installed." Which would then show the list of updates with the State which will show you if it failed or not.Hope that helps. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. It looks like all the files are well intact on the disk.
What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk? I entered the following in the "x:\Sources >" prompt:
start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.
When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'. How am I supposed to have access to remove the patch? Am I missing something? Perhaps a switch in the syntax to access? Help, please. Thank you.
I tried both options that you recommended. As initially stated, no boot option would produce something other than the black screen. I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.
An update, the computer is now fixed. Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start. I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors. That's when I posted the question above after trying to remove the patch in the manner described above. After some time and frustration, I decided to run chkdsk /r c:. It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished. Once I restarted from that, everything came and went very well.
So, the original question remains, what was missing in the command to run pkgmgr/high: successfully. And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually? It would be good to know for the future. Thank you!
-
Windows Vista will be preform no updates anyone can help, thank you
Windows Vista will be preform no updates anyone can help, thank you
Hello
1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?
2. you have made no changes to the computer before the broadcast took place?
3. is the specific question of an update?
Method 1:
Run Windows Update Reset (aggressive mode):
http://support.Microsoft.com/kb/971058
Now, restart the computer and check the update.
Method 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3:
Download the update system analysis tool version of operating system and control accordingly.
http://support.Microsoft.com/kb/947821
How to check the updates failed:
If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.
If the problem remains even in collect and send the Windows Update log.
Follow the below article to collect the log file:
http://support.Microsoft.com/kb/902093
Use SkyDrive download collected files and post screen/image capture
Hope the above information is helpful.
-
I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance
Original title: Hi can someone help me please. I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix
I understand that you now have returned back to factory settings and have installed all updates except for service packs.
.
You will need to install the required service packs-
How to get the latest Vista Service Pack
http://support.Microsoft.com/kb/935791Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343You will need to install SP1 before installing Sp2.
Once your computer is up to date, then you can think of Windows 7
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.
-
Why Vista will not connect to the internet wherever I'm connected with my XP machine?
Why my computer won't get online wherever I like Xp only
Why Vista will not connect to the internet wherever I am? I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared. Thank youHello
1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?
2 have you tried all of the suggestions of Fahimulla K?
I suggest you to go through the steps mentioned in the link and the Coachman.
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
See also:
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
-
What conditions must exist before that Vista will be puy a computer on standby?
What conditions must exist before Vista will put the computer to sleep?
I'm having a horrible time to getting my computers to turn out to fall asleep on their own.
Wake-on-Lan is disabled. Power options are:
Disable hard drive: never
Sleep after 10 minutes
Selective suspension of USB enabled or disabled - makes a difference in my tests
Link state power management off
Processor power management: 10% to 100%
Savings power search and indexing method: energy saving
Turn off the display after 1 minute
Allow the computer to sleep when shaing mediaThe computer will sleep or Hibernate when I select from the start menu or set up and push the power button to do. If the hardware is capable.
My basic question is this: what are the conditions specifically must exist in order for the computer think it should go to sleep. There are a number of processes that are still running of course. There is no way cannot have a time computer the CPU consumption SystemIdleProcess, but is there some criteria that tells the operating system that the computer is idle most of the time? I use the powercfg.exe tool to determine that ONLY the mouse and keyboard are armed for wake up the system.
This computer has 4 user accounts, it's a desktop machine, some accounts may be recorded throughout the night and I still want the computer standby or hibernation even if these accounts are registered on.
What you can do to understand what is happening?
Leif
Thank you for using Microsoft Vista answers Forum!
I suggest that you change the power supply for the multimedia settings options.
· Go to the Start button, Control Panel, click Power Options.
· Choose a power plan different from that you have chosen. If you have high performance, then choose balanced.
· Then click on Change Plan settings. If you get the Windows needs your permission to continue, click on continue. Choose the time you want to put the computer to sleep.
· Then click on change advanced power settings. Under Advanced settings, scroll down to Multimedia settings.
· Expand when sharing media, choose "allow the computer to sleep.
· If this option is grayed out, go to the top of the screen and click on change settings that are currently unavailable.
· This will allow you to choose other options. Click ok to close the dialog boxes.
If please reply and let us know if your problem is resolved or if you need more help.
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Can someone help me please. I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b. I tried the two loading normally and safe mode and I get the same thing.
Hey
Brian39
If you change the motherboard that you normally have to reinstall vista
your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.
and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer
If a retail license, you can change the motherboard
but you will normally always reinstall vista for reasons
Walter, the time zone traveller
-
using Vista, I get a message that I have "limited access" wireless
I have Vista on one of my laptops, I started to use it more as a problem occurred on a laptop more elderly with XP on it. With Vista, I get a message I have connect to my router wirelessly with a limited access wireless. This will show me deservi not able to get on the internet. It works fine when I connect an ethernet cable to it. Any ideas of what I can do?
Hello
A message in the small window that says connected wireless does not mean that you really have a valid functional connection.
Above everything is OK, you must be able to connect to the wireless router. (WIFI hotspot).
Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).
If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
----------------------------
The wireless card drivers much also install utility wireless of the seller.
Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).
----------------
Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
party like Hello and NetMagic 3rd network managers can block local traffic too.
---------------------------
Stack TCP/IP (network IP number) of work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
Maybe you are looking for
-
It covers all the right side of my screen. Can't do email very love. Tried it do fall down or simply disappear but not luck. ARGGGGGG
-
I have update wat lollipop yesterday I got an update which having 1094 MB when I want to update today, but it is not there: it's the latest version
-
Satellite A100-812: low CPU scores
My A100-812 had serious problems.First of all, it doesn't seem to work without notebook cooler. But the reason why I'm here, it's that my Core Duo T2250 score only 3.4 of Vista Basic.According to a developer who is too low for this type and he sugges
-
I can't get rid of silverlight. It says "the component you are trying to use is on a network resource that is unavailable". Please enter a different path... .silver light.msi "Cant find msi, tried to remove silverlight reg keys. It won't go away
-
Connect to the HP ePrint Center
I tried to sign in or register and it won't let me exceed entered my information, it's broken?